ring to display one value

Similar Questions

• How to display one value different, other than what is in the database in a field

  I have a frame repeatating (corresponding to a single request).
  There are 6 fields (columns) in th RF.
  Now say in one column, database values are like 1,2,3,4 etc...
  I want to show "ASSIGNED" is set to 1, INPROGRESS, corresponding to the value 2, etc...
  Could you please tell me how can I do?
  
  Concerning

  Hello

  You can create a formula column in your query and try code below. The formula column must be char as a return data type

  IF :column = 1 then
     return 'ASSIGNED';
  ELSIF :column = 2 then
     return 'IN PROGRESS';
  ELSIF :column = 3 then
     return 'VALUE3';
  ELSIF :column = 4 then
     return 'VALUE4';
  ELSE
     return 'VALUE5';
  END IF;
  

  Concerning

  Maury

  Edited by: ManojP on July 19, 2010 07:26

• Is it possible to LOV (choice list) values to narrow down to a specific number of values or one value?

  Mr President

  Is it possible to limit the values in list of choice to a specific number of values or one value?

  I have a list of values opportunity on my some columns in the table and to restrict the values to the list of specific codes only, or only a single value.

  for example my image below shows the list of choices, and I want that these only values are displayed that begin with 5525001 to 5525009.

  or just 5525001.

  How to get there

  

  In the photo above, there is a list of values, but if I want to see only highlighted value then what to do.

  or if I want only the values starting from 5525 appear then what to do.

  Concerning

  On the ViewObject LOV, make and apply ViewCriteria adapted to your needs, for example:

  

  When adding that VO as seen at the desired ViewObject accessor, apply just created VC

• Display a value or another on reports 6i

  Hello world
  I made a report using reports 6i and I have a field where I would like to display a value of any of my 2 formulas I created, but if one of my formulas brings an empty value, then I want this field to display the value of my alternative, but if the two have a value not empty so I want to show that I want.
  For example:
  I have a field named credit in my layout and I have 2 formula named columns: Formula1 and Formula2. If Formula1 is empty so I want show Formula2, but if the two are not empty, so I want to just display formula1.
  This is the code I use in formula 1:

  function CREDITOSFormula return Number is
  RETURN NUMBER(10,2);
  begin
    DECLARE
         t_credQ1 NUMBER(10,2);
         CURSOR c_credQ1 IS
         SELECT SUM(CREDIT_VALUE)
         FROM TABLE1 A, TABLE2 B
         WHERE A.SCHOOL_ID =:SCHOOL  AND
         A.CREDIT_STATUS = :STATUS AND
          B.STUDENT_ID = :STUDENT AND
          B.PERIOD = :SCHOOL_YEAR AND
          B.GRADE_Q1 IS NOT NULL AND
         A.CLASS_ID = B.CLASS_ID AND
         A.SCHOOL_ID = B.SCHOOL_ID;
    BEGIN
         OPEN c_credQ1;
         FETCH c_credQ1 INTO t_credQ1;
         IF c_credQ1%FOUND THEN
              CLOSE c_credQ1;
              :PLACE_CREDQ1 := t_credQ1;
         ELSE
              CLOSE c_credQ1;
         END IF;
         RETURN t_credQ1;
    END;
  end;

  This is the code that I use for Formula2:

  function CF_1Formula return Number is
  RETURN NUMBER(10,2);
  begin
    DECLARE
         t_credQ2 NUMBER(10,2);
         CURSOR c_credQ2 IS
         SELECT SUM(CREDIT_VALUE)
         FROM TABLE1 A, TABLE2 B
         WHERE A.SCHOOL_ID =:SCHOOL  AND
         A.CREDIT_STATUS = :STATUS AND
          B.STUDENT_ID = :STUDENT AND
          B.PERIOD = :SCHOOL_YEAR AND
          B.GRADE_Q2 IS NOT NULL AND
         A.CLASS_ID = B.CLASS_ID AND
         A.SCHOOL_ID = B.SCHOOL_ID;
    BEGIN
         OPEN c_credQ2;
         FETCH c_credQ2 INTO t_credQ2;
         IF c_credQ2%FOUND THEN
              CLOSE c_credQ2;
              :PLACE_CREDQ2 := t_credQ2;
         ELSE
              CLOSE c_credQ2;
         END IF;
         RETURN t_credQ2;
    END;
  end;

  user626836 wrote:
  Hi Pradhyumn and thanks for your reply,
  Is it possible to use only a single domain where I can show just two values? For example:
  If the value of: CREDITOS is null, and then view the value of: CF_1 or if the value of: CF_1 is set to null, and then view the value of: CREDITOS
  Is this possible to do?

  You can anyway.
  1. create two ranked in the same position where is the first source of field: CREDITOS and the second is: CF_1
  2. Select filed and press F11 to go the code editor for the classified: CREDITOS

  To write

  if :CREDITOS > 0 then
   return (true);
  else
  return (false);
  end if;
  

  Ditto for: CF_1.

  I hope this works...

  Hamid

• show more than one value of PLSQL code for screen

  How to display more than one value of PLSQL code on screen?
  
  
  Below the code has the function of printing two PLSQL code. Can someone pls change the Javascript code according to the code below.

  begin
    htp.prn('hello world');
    htp.prn('hi');
  end;

  JavaScript:
  

  Javascript Code
  var ajaxRequest = new htmldb_Get(null,&APP_ID.,'APPLICATION_PROCESS=TEST_PROCESS',0);
  ajaxResult = ajaxRequest.get();
  alert(ajaxResult);

  SKUD.

  OPPS...

  Need arr = ajaxResult.split(':');

  Kind regards
  Shijesh

  **

• How to display the values of the component of the shuttle by defaul in shuttle from left

  Hi, I have created part of shuttle through JDeveloper
  and I put all the properties
  It displays on the page
  
  There are two boxes or shuttle displayed
  one is for the other for selected values containing all of the values
  
  but in my case bydefault all values are displayed to the right of the box
  I mean, by default all values are selected
  
  How can I solve this

  HA,

  First remove the entire list of choices associated with definitions of the bean of the shuttle. The same check if it always throws an error.

  View me lookup definition, attribute, definition drop-down list Attriubute view drop-down list.

  Kind regards
  GYAN

• Displaying a value derived in a report

  In my application, I have a derived value called a tax, which is calculated with a formula that uses the values of the other 3 columns in one of my paintings.
  Is it possible to create interactive report based on this table that displays the value derived in the form of column (as well as other columns that should be displayed)?
  I don't know how this is possible, given the fact that a report is based simply on a query on the base table. I have to find a way to perform the procedures that are used to calculate the value derived for each line that displays the report. This can be done?

  Hi Prohan,

  You can include the column "fees" directly in your SQL statement. Something like (using the EMP table for example):

  SELECT EMPNO,
  ENAME,
  NVL(SAL,0) SAL,
  NVL(COMM,0) COMM,
  NVL(SAL,0) + NVL(COMM,0) TOTAL_PAY
  FROM EMP
  

  or

  SELECT EMPNO,
  ENAME,
  NVL(SAL,0) SAL,
  NVL(COMM,0) COMM,
  MyFunction(NVL(COMM,0), NVL(SAL,0)) TOTAL_PAY
  FROM EMP
  

  Andy

• How to use c:if condition check in the column to display the value

  I'm working on Jdeveloper11g with the table of the ADF.
  
  UseCase: in one of the column I use the condition such that if the value is not null then use golink otherwise display fair value (in fact, it is nothing). I mean I should be using golink if there is a value for this line. I tried with below but without success.
  
  Let me know the solution.
  
  < af:column sortProperty = "docName" sortable = "true".
  headerText = "#{res}" >
  < c:if test = "${docName.length > 0}" >
  "< af:goLink destination =" #{row.docURL} "text =" #{row.docName} ".
  targetFrame = "_blank" / >
  < / c:if >
  < af:outputText value="#{row.bindings.docName.inputValue}"/ >
  < / af:column >
  
  Thank you
  Katie

  Katie,

  You can do this by using switch or by using the visible property.
  The use of switcher:

  The visible property using:

  Jean Lou

• Read integer values to worksheet and display the values in a table

  Hi all

  I have integer values to read from a worksheet and display them in a table. I uses 'Reading of the spreadsheet file' mode 'integer '. I want to display these values in a table. The problem is the table takes only 2d-array of string as input but not an integer.

  It works fine if I change 'Worksheet file playback' mode to 'integer' to 'chain', but I want to read integers and must use integer values for calculations more. Please give suggestions on the display of integers to a table.

  Thank you.

  Do not take not piece-by-piece just convert as a whole. See the attached example

  

  Good luck

• Display the values in a list in a certain way

  Hello

  I'm looking for a way to display the values in a list by the first value by a slash and the rest with an indentation.

  In other words in this way:

  /value

  Value1

  value2

  value3

  etc...

  Please see the attachment for a better reference where data are received and then filled to the window list.

  Thanks for your comments

  Thanks guys,.

  I endend up doing this:

  If (i == 0)
  {
  sprintf (current_log_view, "/ %s", cnfg_display_db [i] "");
  }
  on the other
  {
  sprintf (current_log_view, "%s", cnfg_display_db [i]);
  }
  SetCtrlVal (log_panel, LOG_LOG_TB, cnfg_display_db [i]);
                          
                          
  InsertListItem (dir_list_panel, DIR_LIST_RETR_LIST, current_log_view, i, 0);

  and it works very well!

  Thanks again

• Displays the value of double type

  Hi - another crazy me today. With the help of v % of the SDK. Memorization of the GPS coordinates in a persistent storage which is fine. So want to show these results on a screen by updating a labelField with the value.

  the code below, printLn myTest displays a value of something as 42.1234 gets so thin value. However, with the code so I get Double.toString (myTest) cann't find symbol even though I java.lang. *; imported. If I remove this line of double.toString then it will compile, but throws an exception error when I try to display on the screen. Can someone help a newbie pls...

  If (persistentHashtable.containsKey ("LVFLat")) {}
  Double myTest is (Double) persistentHashtable.get ("LVFLat");.
  System.out.println ("# latitude =" + myTest);
  String finalLat = Double.toString (myTest);
  displayLVFLat.setText (myTest);
      
  }

  You must read the documentation of the API and note the use of capital letters and tiny.  Capitals: the object, tiny, primitive.  Read the API done again and see what I mean.

  You want to replace this:

  String finalLat = Double.toString (myTest);

  with

  String finalLat = myTest.toString ();

• How to display a value of transitional attribute to column db entity column?

  Mr President

  Help me at the time 12.2.1 jdev.

  How to display a value of transitional attribute to column db entity column?

  I have the requirement to indicate a value of transitional attribute column in the column db entity for some reason any.

  Any body can help as my show in the picture below

  The StAmt is a transitional column and a column db of the entity.

  

  Any body can help please. !

  Concerning

  This means that the amount to be the attribute will always has the same value of the transient attribute? If so, why do you want the amount attribute the transient attribute is sufficient?

  Anyway, if you want to get attribute data in attribute transitional amounts you can open class ViewRowImpl and appearing in the getter or amount, you can get the value in the transitional as attribute:

    public Number getAmount()
    {
      return getTransientAttribute();
      //return (Number) getAttributeInternal(AMOUNT);
    }
  

  in this case, the quantity data store database will not appear on the table it will still get the transitional attribute data and it's meaningless.

• Selection list refresh / 'display additional values '.

  I'm refreshing a list of selection with dynamic action and then after with dynamic action to set the value to the max value.  The problem is that it assigns the first item in the list.  Seems to act as the game happens before the update is completed.  I have the option "display additional values" but I can't find a way to set the value of a dynamic action - it does not accept the additional value.  This should work?

  It's not a bug, discounting is a reminder of the AJAX and success raises an apexafterrefresh event.

  You can add a second dynamic action for the selection list:

  Event: after refresh

  Selection type: point

  And then the new value must be available.

  The display of the values additional option has another purpose. Explained in the help text to the Apex 5.

  Display additional values

  An element can have a value of session state that does not occur in the given list of values definition. Specify if this list of values this additional session state value. If you choose not to display this additional session state value and there is no matching values in the list of values, the first value in the list of values is the value selected and displayed.

• Can a dynamic action of type 'alert' display a value of field without javascript?

  Hello

  can a dynamic action of type 'alert' display a value of field without javascript ( alert ( $x (P '200_OP').value)); ?

  What should I write in the 'text' section to display in the alert, the value of P200_OP for example?

  Gianpaolo cordially

  Hi gianpagi,

  gianpagi wrote:

  I know that with "run JavaScript Code" works. My question is about action as 'alert '.

  Dynamic action "Alert" is expected to this only the string to display in the alert. May not be able to access the current value set in a page element.

  Therefore, "Run the Code JavaScript" only works in this case where your can integrate the current values of the DOM html elements

  If you notice that da 'Alert' request 'Text' and 'Execute JavaScript Code' DA 'Code' request to be executed.

  Kind regards

  Kiran

• How to display the value of the variable for bottom of pl/sql

  How to display the value of the variable for bottom of pl/sql

  declare

  V_1 number: = 10;

  V_2 number: = 20;

  V_3 number: = 30;

  v_4 number: = 40;

  v_5 number: = 50;

  test varchar2 (100);

  Start

  I'm in 1.5

  loop

  test: = "v_" | I have;

  dbms_output.put_line(i||) e > ' | test);

  end loop;

  end;

  /

  How to get below output:

  1 > v_1

  2 > v_2

  3 > v_3

  4 > v_4

  5 > v_5

  But I want to output of

  1 > 10

  2 > 20

  3 > 30

  4 > 40

  5 > 50

  Hello

  You cannot reference variables as you did and get the value of the variable. Use pretty collection.

  set serveroutput on size 2000
  declare
    type      number_table is table of number;
    numbers   number_table := number_table(10, 20, 30, 40, 50);
  begin
    for i in numbers.first .. numbers.last
    loop
      dbms_output.put_line(i || '->' || numbers(i));
    end loop;
  end;
  /
  
  anonymous block completed
  1->10
  2->20
  3->30
  4->40
  5->50
  

  See the Collections of PL/SQL and Records http://docs.oracle.com/cd/E11882_01/appdev.112/e25519/composites.htm#LNPLS005