RMAN backup to the remote disk in Windows
HelloI'm under Oracle 9.2.0.1 with Windows Server 2003 in Server A and Server B. My first DB is stored in the server a in the meantime my catalog RMAN is to Server B. I'm under RMAN to do the backup of the DB in Server A, which is short of space. So, I decided to put my backupsets to Server B since I got here a few hundred Gs. Overall, I will push the catalog RMAN backup script to Server B and store the backupsets to Server B.
My problem is when I run the script, what either him or from a server or Server B, I get the following error. Tied together correspond to the configuration of RMAN settings.
Error:
***********************************************************************************
RMAN > backup database;
From backup 20 August 09
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid = 13 devtype = DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: sid = 9 = DISC devtype
allocated channel: ORA_DISK_3
channel ORA_DISK_3: sid = 14 devtype = DISK
channel ORA_DISK_1: from full datafile backupset
channel ORA_DISK_1: specifying datafile (s) in backupset
input datafile fno = 00012 name = F:\ORADATA\DRDB\DATA\DATA01. DBF
channel ORA_DISK_1: starting piece 1 at 20 August 09
channel ORA_DISK_2: from full datafile backupset
channel ORA_DISK_2: specifying datafile (s) in backupset
input datafile fno = name 00002 = F:\ORADATA\DRDB\DATA\DATA07. DBF
channel ORA_DISK_2: starting piece 1 at 20 August 09
channel ORA_DISK_3: from full datafile backupset
channel ORA_DISK_3: specifying datafile (s) in backupset
input datafile fno = name 00006 = E:\ORADATA\DRDB\INDEX\INDX01. DBF
channel ORA_DISK_3: starting piece 1 at 20 August 09
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 2009-08-20 17:06:
56
ORA-19504: cannot create the file '\\ServerB\f$\drdb\backupset\BackupDRDB_DB_39k '.
n665g_105_1 ".
ORA-27040: skgfrcre: error, unable to create the file
04002 - OSD: could not open the file
S/O-error: (OS 5) access denied.
RMAN > show all.
RMAN configuration parameters are:
CONFIGURE REDUNDANCY 10 RETENTION STRATEGY;
CONFIGURE BACKUP OPTIMIZATION # by default
SET UP DEFAULT DISK DEVICE TYPE; # by default
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FOR DEVICE TYPE DISK FORMAT to ' \\ServerB\f$\d
rdb\controlfile\Backup%d_CTL_%F';
SET UP THE DEVICE TYPE DISK PARALLELISM 3;
CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT ' \\ServerB\f$\drdb\backupset\Backup
% d_DB_ % %%p s_ u_ ';
CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
CONFIGURE the SNAPSHOT CONTROLFILE NAME to ' \\ServerB\f$\drdb\controlfile\SNCFDRDB.
CTL';
**********************************************************************************
My login ID exists in the administrator and ORA_DBA group in Server A and Server B. I can manually run the path '\\ServerB\f$\drdb\backupset\' on server A and able to create/modify/delete a file inside this folder. But I don't understand why the error "access denied"? In any case, is it a proper way to do remote disk backup? I am quite new to Oracle and just attended courses RMAN with the OU. I have Google-ed this problem but no one can help me. Please help me or share your knowledge to solve this problem.
Thank you and best regards,
Nsiala
Hi nsiala.
Under windows, the oracle process runs as a service. By default, this service runs under the Local System account. This account is fairly low privileged when it comes to remote network privileges and therefore cannot see the directory you are trying to write your backups to.
You can change the user that the service is running as, there are a few notes on metalink for this and I remember well find some info usually using google.
Concerning
André
Tags: Database
Similar Questions
-
How can I get windows vista? I get a message that PC is not supported by the recovery disks. Windows vista Home premium HP pavilion dv9310us
Hello
This recovery software is part of the process of HP.
Contact HP support
http://WWW8.HP.com/us/en/support-drivers.html
Or ask in the Forums of HP's Support.
http://h30434.www3.HP.com/PSG/
See you soon.
-
How to enable the remote desktop on windows 7 because it is missing in system properties | tab use remotely.
I am running Windows 7 Ultimate edition with service pack 1.
I used to connect my mac via the desktop tool to remotely (2.1) on my mac to my pc windows 7.
Now, it does not. Check the services of windows 7 I have ensured that all the remote control * services are enabled, but I still do see the Remote Desktop option in system, under the remote settings properties.
Any help would be appreciated.
MasterJay1
Click Start, click Help, and then type this phrase in the search box:
enable remote desktop
Article 5 will have explicit instructions for the task.
-
I reformatted my T520 with the recovery disk, but Windows cannot start
I reformatted my T520 with my recovery disk. When the computer restarts, it says that Windows cannot start properly. Help, please.
I finally solved the problem; Here is my solution:
I have determined that the backup image has been bad, and this is perhaps why the recovery disks have been as bad. I tried to use both to reformat the C:\drive several times without success. Fortunately, I had a Windows 7 disc from another computer that I no longer use. However, the T520 would not be updated to Windows 7 using this disk, so I run Diskpart to reformat all (this removes everything, including the image.) Then, I was able to reinstall Windows 7.
With this new facility, would not any responsible drivers, including LAN and wireless drivers. I went on the Lenovo Web site: http://support.lenovo.com/en_US/downloads/default.page?selector=expand to download the driver for "Intel Wireless LAN (11abgn, abg, bg). This provided wireless access to the computer. (Downloaded the driver on another computer, saved on a USB stick to transfer to the T520.) Restarted the computer in case where. Then, I went to http://support.lenovo.com/en_US/detail.page?LegacyDocID=TVSU-UPDATE to download ThinkVantage System Update 5.0. After you have installed this software and reboot, all the necessary drivers would be so loaded.
Unfortunately, if you don't have any Windows disk, you will need to pay 50 dollars to get one from Lenovo. Lesson learned? Next time I buy a new computer, the first thing I would do is to reformat and reload the computer by using the image while still under warranty. I did several times with my other Lenovo laptops without fail. I have to do this once every 3 years each time my computer seems to slow down. This is the first time, it didn't work.
I hope this help anyone who is in the same situation.
(Boy, I have miss the good old days when I could fix everything from the DOS command prompt.)
-
RMAN backup with the smallest size of backup
Oralce 11g 2 on Redhat 5. Disk space is our the tighter resource, and we want an incremental backup with Level0 Sunday and level 1 every day of the week and on Saturdays. I'm using the comamnds to do the job
I don't think that it is the best practice or produce smaller backup files.--Sunday backup incremental level 0 tag 'level_0' database plus archivelog; --Other days backup incremental level 1 database plus archivelog delete all input;
What are you comments and opinions. Thank youRMAN backup except for the backup copy will only backup blocks used, which is quite efficient. Backup incremental level 1 are set by default and the smallest of the incremental backup.
However, you can enable compression reduce the size of the backupset (Oracle 10 g and more). You can also enable the block track the changes in the database only once, so that backup incremental level 1 do not need to analyze the data files for the changes - this allows saving a lot of time and IO.
SQL > ALTER DATABASE ENABLE BLOCK CHANGE TRACKING;
RMAN > run {sql 'alter system switch logfile' ;}}
RMAN > BACKUP AS BACKUPSET INCREMENTAL LEVEL 0 COMPRESSED DATABASE MORE ARCHIVELOG DELETE ALL ENTRIES;
RMAN > ACE COMPRESSED BACKUPSET INCREMENTAL LEVEL 1 DATA BACKUP MORE ARCHIVELOG;I would prefer not to delete the archivelogs after each incremental backup of level 1 in order to make a point in time recovery without the need to restore the archivelogs.
And don't forget to:
CONFIGURE CONTROLFILE AUTOBACKUP ON;I hope this helps.
-
Consistent test 'copy' of RMAN backup outside the ASM (RAC)
Hello!
We create consistent backup RMAN in our CARS (ASM with FRA) environment.
Safeguard measures looks like:alter system set cluster_database=false scope=spfile sid='HAC4';
Then we begin the RMAN backup script as (database is closed to the ground before):
srvctl stop database -d HACrun {
After backup, we realize:
startup mount;
allocate channel t1 type disk format '/u01/rman_backup/HAC/cold_backup/HAC_%U';
allocate channel t2 type disk format '/u01/rman_backup/HAC/cold_backup/HAC_%U';
SET CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/u01/rman_backup/HAC/cold_backup/HAC_%F_ctl';
backup as copy database include current controlfile;
}alter system set cluster_database=true scope=spfile sid='HAC4';
and later
shutdown immediate;srvctl start database -d HAC
This backup backup files are placed on the area of local disk accessed by noeud4, where HAC4 SID is on.
We transfer the backup files to tape on an hourly basis...
Now, we want to test this backup.
Scenario:
Because we have consistent backup, we think we can restore her (from files on this disc) and him ALONE!
Our problem is that while restoration is the use of the DSO files, so we're not sure is our backup.
So, how to prevent the RMAN restore/recovery process of using any ASM file - just to use our consistent backup data?
Please a few example script for this...
Our config:
Oracle 10gR2.0.4 PS3 (NCPS, ASM database),
Linux Rhel IA64 5.3 on 'raw devices' (no raw disks)
THX
DamirHello
What I realized is that you want to test the image copy backup you took earlier and test this to restore the database, as it is.
Now, if I see your script, it shows that you have restored control file and then you tried to recover the database.
But when you make the copy of the image of the database, and you want to restore, then you have to try to restore the database first. I don't see any "restore order" in your script.
RMAN > restore database from tag = "
"; Firstly, this will restore the data files.
Then, use
RMAN > restore database;
Then, open the database.
Kind regards
Vermorel -
RMAN backup to tape and disk script
Hi all,
I'm looking for a script to backup on tape and disk using an RMAN command. There is that one parameter, I don't want to understand, I've seen evidence of. Backup of the Flash recovery area. I want to be able to do it from the location of the files. I want to back up the database complete, kitchen sink and everything.
Can anyone help?
General information.
Database 10 g 2, Grid Control 10.2.0.4, Linux RHEL4.6 Server. If you need more information please ask me.
Thank you all!This can be by setting up your backup channels,
Channel configuration
http://download.Oracle.com/docs/CD/B19306_01/backup.102/b14191/rcmconfg.htm#i1006906
-
I have a laptop HP Pavilion dvt7-3000 CTO that has a single disk drive hard 500 GB. The operating system has been improved in Windows7 Pro (64-bit) to Windows 8 Pro (64-bit), but the problem occurs in both operating systems. When conducting the defragmentation of the different hard disks (C:\ D:\, HP tools and system), the percent of the "System" drive which is fragmented never changes, while the % fragmented adequately for other readers going to 0%. Over time, the system part of the hard disk rose to 27% fragmented. How to defragment this drive?
Hello
The system partition contains the boot files and recovery for Windows 7 environment and should not be défragmentée. It will always appear to be fragmented and it is quite normal - force this partition defragment would almost certainly avoid the Windows startup. In addition, the fragmentation in this small partition has absolutely no effect on performance.
For much the same reasons, the recovery partitions or HP_TOOLS must be défragmentées.
Kind regards
DP - K
-
I have a mac with OS 10.4.11 and I try to access a remote server running Windows Server 2008 R2. I have installed, uninstall and reinstall the Client of remote access for Mac 2.0.1 but I can not connect. My network administrator tells me that Mac OS 10.4.11 is so old and useless that I am better just throw my computer and buy a new one in order to solve the problem. This is absurd. Can you help me?
Hi Benjamin Spicer,.
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please post your question in the Forums TechNet Remote Desktop Services (Terminal Server Services).
-
I have problems connecting to the remote desktop on Windows Server 2008.
I have many positions of work XP trying to connect to our servers to Server 2008 Remote Desktop, but get the message, "because of a security error, the client could not connect to the remote computer".
When I check the version of remote desktop it uses, it is 5.2.3790 in program Files\Remote Desktop
Now, if I go to Windows\System32, I find mstsc.exe and can connect to the same server perfectly. But if I go to save the connection, RD is up to version 5.2.
How can I remove the old version and just use the newest one?
Thank you.
Original title: a different version of the remote desktop
Hi msenior,
Thanks for posting your query in the Microsoft Community.
Method-
I would have you post your query in the TechNet Forums because it caters to an audience of it professionals.
Your query will be better addressed there.
Check out the link-
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
We know if you need help. We will be happy to help you.
Thank you.
-
Original title: unable to see many folders on separate conputer
I was using windows xp with service pack 3 and windows 7 on a separate booklets. Suddenly the laptop with XP crashed... The hard drive was Ok - cased with a USB port, but now on the connection with the computer laptop windows7 I saw no many records there - pls help
the system crashed in fact as I was reading the (visualization of the pictures - JPEG, bmp and also some books .pdf) & suddenly. In the Xp laptop NVIDIA graphics card was there. He lacked RECENT documents, I see
Hello
Try the methods provided below and check if the problem persists.
Method 1:
You can make the disk check to make sure that the hard disk is not damaged.
See the link below for more information on disk error checking in Windows XP.
How to perform disk error checking in Windows XP
http://support.Microsoft.com/kb/315265
Note:
Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
Method 2:
This issue could also be linked to the virus/malware on the hard drive that may have caused the crash of the system.
Click on the link below to download and run a full scan of the system using the Microsoft Safety Scanner.
Microsoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note:
The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
-
I have an internal backup drive that I used for a computer that crashed. Hard drive that had the operating system gone wrong. I'm sure that the backup drive (no operating system, only the Acronis backup data) is ok. I took, put it in a box of hard drive and plugged on my other computer to get all the data out of it. It is recognized in but device manager not MY computer. Information have read so far wants choose me to go to right click on my computer, Manage, and chose the disk management. Then he wants me to initialize the disk. The information said once the disk initialized, I should be able to access all data on the disk. I do? I don't want to erase all data on the disk. I prefer to take it to a PRO for $100 if there is even a small chance I could damage or erase the data on the disc. Please notify.
Do not initialize the disk. That would erase all data. It is possible that the hard disk enclosure does not work right, causing Vista to see the player correctly as not initialized.
Did you create Acronis Secure Zone on the drive for backups? If so, you will need to use the same program from Acronis to access. It would be interesting to boot from the Acronis recovery disc and see if it can read backups. Boulder computer Maven
Most Microsoft Valuable Professional -
How to create the recovery disk in Windows 8
Original title: HELP! I need to know how
I recently got a laptop HP 2000 for Christmas. She has windows 8, which I'm not too used to it. And I can't understand how or where to go to create a recovery disc for it before you put anything else on my new computer laptop. How can I do this? Any help would be appreciated.
Hello
Recovery of the system and the disk recovery options
http://Windows.Microsoft.com/en-us/Windows-8/system-recovery-diskCreate a recovery USB disk
http://Windows.Microsoft.com/en-us/Windows-8/create-USB-recovery-driveHow to create a system image to refresh your PC in Windows 8
http://support.Microsoft.com/kb/2748351Some manufacturers have integrated recovery methods to verify with the help of HP, their online
documentation and ask questions in the forums about known problems.HP support/troubleshooting & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/=========================
While on the screen type start - Help
Or Win Key Q plus Apps search - help
Or charms - Search - Apps - Help Menu
After that the foregoing-> on left click-> Help and Support.
==================================
Solution Windows 8 - left Center - learn more
http://support.Microsoft.com/GP/Windows-8Meet Windows - a good start
http://Windows.Microsoft.com/en-us/Windows-8/meetGet to know Windows
http://Windows.Microsoft.com/en-AU/Windows-8/basics#1TC=T1How-to: get acquainted with Windows
http://Windows.Microsoft.com/en-AU/Windows/how-to#2TC=Windows8Contact: call, tap and beyond
http://Windows.Microsoft.com/en-AU/Windows-8/touch-swipe-tap-beyondIs a free and convenient application available on the Store - Top Free
"Windows 8 Cheat Keys.
http://apps.Microsoft.com/Windows/en-us/app/Windows-8-cheat-keys/24f62990-98c7-4c26-95cb-cb09267680e8==================================
There is no start or the Windows 8 Start Menu button.
Where is the start menu?
http://Windows.Microsoft.com/en-us/Windows-8/where-is-start-menuCustomize the splash screen
http://Windows.Microsoft.com/en-us/Windows-8/start-screen#1TC=T1Windows 8 is not available classic appearance.
3 third party programs can help:
StarDock - Debut8 - costs 4.99 $US
http://www.stardock.com/products/Start8/Free
Classic interface
http://www.classicshell.NET/Pokki
https://www.pokki.com/Windows-8-Start-menuI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
RMAN backup in the dated dated system folder
Hi all
I need to store the rman backup in linux like system date of the file.
I created the folder
*#mkdir /bkp/ $(date +%Y%m%d) *.
and I've tried this,
RMAN > backup database format ='/ bkp/$(date +%Y%m%d)/db_%d';)
does not, how to solve this problem.
Thanks in advance
Sila"mkdir/bkp /'date + %m %d %Y"
for rman
create the variable date_rman lik"date_rman ='date + %m %d %Y"
RMAN > backup database format='/bkp/$date_rman/db_%d "; -
Only RMAN backup, restore the temporary files?
DB version: 11.2
Operating system platform: Solaris 10
Can RMAN backup and restore temp files?
I'm to recreate a database in a new server, when restoring, it's recommended to restore a temporary RMAN backup file? (if Rman can indeed save and restore temporary files). Or is it better to manually create temporary files in the new server?N ° RMAN does not backup TEMPFILEs. (so it does not restore them).
You can not even explicitly issue a command to BACKUP for TEMPFILEs.The TEMPORARY file is re-created automatically when you OPEN the database - it is created at the location specified in the controlfile.
Hemant K Collette
Maybe you are looking for
-
Original title: reinstall the client of microsoft security error flags 0 x 80070715 if the problem persists, reinstall security customer microsoft. appears on each sign on / pc with xp sp3
-
How can I move my computer from Windows Vista to Windows 7? Custom or upgrade?
Hi, I have a Dell XPS M1530 with Windows Vista 32 bit, I bouht a Windows 7 Family pack upgrade, my computer has this partition of the hard drive C: 220 GB and RECOVERY D: 10 GB. I want to know that if I do the install as upgrade, it will keep the sam
-
I can't find the driver for my network on 431 Hp windows 7 32-bit controller
Hello, I have a problem here. IM using 431 HP with windows 7 32 bit. I can't find the right driver for my network controller. Here's my hardware ID: PCI\VEN_168C & DEV_002B & SUBSYS_1461103C & REV_01PCI\VEN_168C & DEV_002B & SUBSYS_1461103CPCI\VEN_16
-
My speakers do not work * The position proposed by the facilitator at the appropriate forum category (for Windows |) Windows 7 | Other applications Windows Windows | Windows 7 | Hardware & drivers). **
-
Trying to DL data a PCTown of office running under Windows 98 using HP v125w 64 GB thumb drive
Hello I'm putting 12 GB on one inch of HP drive since a former office of PCTown. The computer running windows 98 and does not recognize the drive, but when he searches for a driver it does not find one that works. I have no internet access... can any