Road access not valid asset

Similar Questions

• (access not valid error # 998 to memory location) when executing program fractal opening plugin .dll

  I have Windows Vista Home Basic Service Pack 2 32-bit operating system Acer Aspire 5516 model with 2.00 GB RAM 139 GB Hard Drive 160 Ghz laptop speed. I use a version of the program Apophysis fractal 7 X 15. I have a lot of .dll plugins in this program that load very well. But he won't always open a plugin when I run Apophysis. This is "post_bwraps2.dll". This and many other plugins .dll in this program are the ones I downloaded separately to add to the plugins that have been provided with the program. He is the only person that I have problems with.

  Hello

  You can choose your favorite search engine to search for the DLL file to another, you must contact the manufacturer of the application.
  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
   
  You can also consult the 'Help' section for support and FAQs on the plugins.

  http://apophysis.xyrus-Worx.org/

• After the upgrade to FireFox 30, we can access is no longer internal websites. He gives us 401 - non authorized: access denied due to credentials not valid.

  What is happening on our internal websites used to ask for a window to enter your credentials. This is not is no longer the case.

  It comes immediately gives us a

  401-Unauthorized: access is denied due to credentials not valid.
  You don't have permission to view this directory or page using the credentials you supplied.

  Hello, this is perhaps due to the deactivation of some insecure authentication protocols in firefox 30: https://www.mozilla.org/en-US/firefox/30.0/releasenotes/#whatsnew

  You can try to enter Subject: config in the address bar of firefox (confirmed the message information where it appears) and search for the preference named network.negotiate - auth.allow - insecurity-ntlm-v1. Double-click it and change its value to true.

• WARNING 1336: The structure of access control list (ACL) is not valid

  Security permissions are stripped on Win 7 32 bit.  Trying to restore default

  Followed the instructions to reset default command-line following running as administrator - results to the newspaper below

  secedit / configure / db /cfg %windir%\inf\defltbase.inf defltbase.sdb / verbose

  How can I fix the structure of the access control list?

  Log file:

  December-14-10 09:38:47
  -Configuration engine was initialized successfully.-

  -Model of reading Configuration information...

  -Rights of the user to configure...
  SeImpersonatePrivilege must be attributed to administrators. This setting is defined.
  SeImpersonatePrivilege must be assigned to the SERVICE. This setting is defined.
  Configure the S-1-5-18.
  Remove SeShutdownPrivilege.
  Configure S-1-5-21-4262353681-2820704222-1343016971-1004.
  Remove SeNetworkLogonRight.
  Remove SeBatchLogonRight.
  Remove SeServiceLogonRight.
  Remove SeDenyInteractiveLogonRight.
  delete SeDenyRemoteInteractiveLogonRight.
  Remove SeImpersonatePrivilege.
  Configure S-1-5-21-4262353681-2820704222-1343016971-1005.
  Remove SeServiceLogonRight.
  Configure S-1-5-21-4262353681-2820704222-1343016971-1006.
  Remove SeServiceLogonRight.
  Configure S-1-5-21-4262353681-2820704222-1343016971-1008.
  delete SeDenyBatchLogonRight.
  Remove SeDenyInteractiveLogonRight.
  Configure the S-1-5-32.
  Remove SeServiceLogonRight.
  Configure the S-1-5-19.
  Configure the S-1-5-20.
  Remove SeServiceLogonRight.
  Configure S-1-5-32-544.
  Configure S-1-5-32-551.
  Configure S-1-5-32-559.
  Configure S-1-5-32-545.
  Configure the S-1-1-0.
  Configure the S-1-5-6.
  Configure S-1-5-21-4262353681-2820704222-1343016971-501.
  Add SeDenyNetworkLogonRight.
  Configure S-1-5-32-555.
  Configure S-1-5-80-0.
  Configure S-1-5-80-3139157870-2983391045-3678747466-658725712-1809340420.

  User rights configuration was completed successfully.

  -Configure the group membership...
  Set up users.
  remove the Bob-PC\ASPNET.

  Group membership configuration was completed successfully.

  -Configure registry keys...
  Configure users\.default.
  Configure machine\software.
  WARNING 1336: Access control list (ACL) structure is not valid.
  Error setting security on machine\software\Licenses.

  Configuration of registry keys was completed by one or more errors.

  -Configure file security...
  Configure c:\program files\common files\speechengines\microsoft\tts.
  WARNING 2: The system cannot find the specified file.
  Error safe on c:\program files\common files\speechengines\microsoft\tts.
  Configure c:\programdata\microsoft\windows\drm.
  Configure c:\programdata\microsoft\windows\drm\cache.
  Configure c:\windows\repair\default.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\default.
  Configure c:\windows\repair\ntuser.dat.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\ntuser.dat.
  Configure c:\windows\repair\sam.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\sam.
  Configure c:\windows\repair\security.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\security.
  Configure c:\windows\repair\software.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\software.
  Configure c:\windows\repair\system.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\system.
  Configure c:\windows\system32\windows media.
  WARNING 2: The system cannot find the specified file.
  Error on c:\windows\system32\windows media safe.

  File security configuration was completed successfully.

  -Set up the parameters of the General Service officer...
  Configure the sysmonlog.
  Error 1060: The specified service does not exist as an installed service.
  Error opening sysmonlog.
  Configure SamSs.
  Configure ntmssvc.
  Error 1060: The specified service does not exist as an installed service.
  Error opening ntmssvc.
  Configure netddedsdm.
  Error 1060: The specified service does not exist as an installed service.
  Error opening netddedsdm.
  Configure netdde.
  Error 1060: The specified service does not exist as an installed service.
  Error opening netdde.
  Configure dmserver.
  Error 1060: The specified service does not exist as an installed service.
  Error opening dmserver.
  Configure clipsrv.
  Error 1060: The specified service does not exist as an installed service.
  Error opening clipsrv.
  Configure the browser.

  Agent of General Service configuration was completed successfully.

  -Configure available attachment engines...

  Attachment engines configuration completed successfully.

  -Configure security policy...
  Configure password information.
  The administrator account is disabled.
  Guest account is disabled.

  Access configuration was completed successfully.
  Search anonymous LSA appoints setting: existing SD = D: (D; 0 X 800;) (A) (; xf1fff 0;) BA) (; 0 x 20801;) WD) (; 0 x 801;) (A) (a. 0x1000;) LS) (a. 0x1000;) NS) (a. 0x1000;) S-1-5-17).
  Configure the setting LSA anonymous search.
  Set up the nt\currentversion\setup\recoveryconsole\securitylevel machine.
  Set up the nt\currentversion\setup\recoveryconsole\setcommand machine.
  Set up the nt\currentversion\winlogon\scremoveoption machine.
  Configure machine\software\microsoft\windows\currentversion\policies\system\dontdisplaylastusername.
  Configure machine\software\microsoft\windows\currentversion\policies\system\legalnoticecaption.
  Configure machine\software\microsoft\windows\currentversion\policies\system\legalnoticetext.
  Configure machine\software\microsoft\windows\currentversion\policies\system\scforceoption.
  Configure machine\software\microsoft\windows\currentversion\policies\system\shutdownwithoutlogon.
  Configure machine\software\microsoft\windows\currentversion\policies\system\undockwithoutlogon.
  Configure machine\software\policies\microsoft\windows\safer\codeidentifiers\authenticodeenabled.
  Configure machine\system\currentcontrolset\control\lsa\auditbaseobjects.
  Configure machine\system\currentcontrolset\control\lsa\crashonauditfail.
  Configure machine\system\currentcontrolset\control\lsa\disabledomaincreds.
  Configure machine\system\currentcontrolset\control\lsa\everyoneincludesanonymous.
  Configure machine\system\currentcontrolset\control\lsa\fipsalgorithmpolicy\enabled.
  Configure machine\system\currentcontrolset\control\lsa\forceguest.
  Configure machine\system\currentcontrolset\control\lsa\fullprivilegeauditing.
  Configure machine\system\currentcontrolset\control\lsa\nolmhash.
  Configure machine\system\currentcontrolset\control\lsa\restrictanonymous.
  Configure machine\system\currentcontrolset\control\lsa\restrictanonymoussam.
  Configure machine\system\currentcontrolset\control\print\providers\lanman printing services\servers\addprinterdrivers.
  Configure machine\system\currentcontrolset\control\session manager\kernel\obcaseinsensitive.
  Configure machine\system\currentcontrolset\control\session manager\memory management\clearpagefileatshutdown.
  Configure machine\system\currentcontrolset\control\session manager\protectionmode.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\autodisconnect.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\enableforcedlogoff.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\enablesecuritysignature.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\requiresecuritysignature.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\restrictnullsessaccess.
  Configure machine\system\currentcontrolset\services\lanmanworkstation\parameters\enableplaintextpassword.
  Configure machine\system\currentcontrolset\services\lanmanworkstation\parameters\enablesecuritysignature.
  Configure machine\system\currentcontrolset\services\lanmanworkstation\parameters\requiresecuritysignature.
  Configure machine\system\currentcontrolset\services\ldap\ldapclientintegrity.

  Registry values configuration completed successfully.
  Configure the log settings.

  Configuration of the audit / log has been successfully completed.

  -Configure available attachment engines...

  Attachment engines configuration completed successfully.

  Engine - UN-initialize configuration...

  Hello

  See if the continuation of the measures on this blog help repair the ACL: http://blogs.msdn.com/b/astebner/archive/2006/09/04/739820.aspx

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Got "the page you are trying to access is not valid." When trying to access the document

  We have an EchoSign document already sent to the clouds to Adobe via API v20, after successful sending that get the URL to access the document. And in our application that is a cluster with two application servers, say a server and Server B and send the document to Adobe via the server. Now, when you try to open the URL of the document from Server A, it is well; but when you try to open the URL of the server B, it reports that "the page you are trying to access is not valid.". Any idea on this? For Server A and Server B, the URL is the same, is not why this happens.

  Hello Usman,

  We have already solved the problem. That's the problem on our side. :-)

  Thank you

  Qing

• Need help: Reader does not start, the message error "attempt to access an address not valid."

  My previous installation of the drive (Windows 7, 32 bit) worked without any problems.  Until a few days ago when I updated to the latest CD player.  Installation worked fine, but when you try to start the CD player, I received the following error message: "attempt to access an address not valid."  I uninstalled CD and installed Player 11.0.  Yet once, installation worked fine, but I get the same error message, even if double click directly the Adobe Reader .exe file.

  A similar question was asked in December 2014, but I do not see a resolution.

  Without Adobe Reader, many applications simply do not work.  Any help would be appreciated.

  

  Thank you, Christopher, but this thread did not provide the right answer to my situation.  However, I continued working on my problem and finally found the solution: it's software Msreader EMET let go.  This software is an absolute disaster.  This is a free Microsoft security software. It's great, but once installed on your system, you cannot uninstall it even more.  After an EMET update a few months ago, I could not start Microsoft Word program.  After hours of play and even communicate with their support (not), I finally understood that he was own EMET software Microsoft blocks the Word Microsoft to start program.  Apparently, these guys don't know what they are doing.

  Anyway, I was ready to uninstall and reinstall the drive again, this time using the cleaner of Adobe's Acrobat Reader software to remove all possible traces of before install.  Before I did that, I remembered the EMET disaster a few months opened EMET, unmarked all actions AcroRd32.exe, and voila, launched reader and let me not open PDF files. (I had to reboot my PC before that worked).  Player is then proposed to upgrade to the latest version.  I did, and big surprise, Reader produces the same error message after the update.  Heck!  But after another reboot, the drive launched without any problem (apparently, EMET for the additional restart to recognize the changes after the update).

  I lost the greater part of the day to work on this issue, but I'm a happy camper again, because my Acrobat Reader works again.  Maybe my experience will help someone else.

• How to access the pdf of the cloud on iPad when says "document path is not valid.

  Hello

  I am wanting to access a PDF file from my Windows PC, my iPhone and my IPad, I'm trying to read and HI-lighting for use in higher education. I can't seem to save my computer Adobe document cloud and you can view them on my iPhone, but all the documents I try to access on my IPad that are found on the cloud receive a message of: "the path to the document is not valid."  If I save a document in my software adobe reader on my IPad for an email or a Web site directly from my IPad, I am able to open it. This affects only the documents in the cloud. The files all say they have different file sizes (e.g. - 207KO, 166KB, etc. and NOT say 0 KB, so I know that the document is not a blank document). Any suggestion would be great. In addition, the settings in the application are the same for my IPhone and my IPad, so I find it confusing that I can access it on my IPhone but not my IPad. Both use the same IOS software. (IOS 9.0.2).

  Thank you

  LInda

  Hello

  Please check if you have saved the file storage cloud Document and mobile link is turned on. Also, check if the file is completely downloaded to the cloud storage by going to cloud.acrobat.com.

  Thank you

  Abhishek

• APP-COMPENSATION-07092: this action is not valid for the current record.

  Cannot access panel assignments used to updates within oracle HR receive this error message. How to solve this problem.

  Please see these documents.

  APP-COMPENSATION-07092 this action is not valid for the current record by trying to access assignment [813815.1 ID]
  PERWSHRG APP-COMPENSATION-07092 when you navigate to assignments [796523.1 ID] screen
  PERWSHRG APP-COMPENSATION-07092 trying to access assignment [ID 1434212.1]
  PERWSEAC cannot enter costs for the Contingent Workers APP-PAY-07092 [1458000.1 ID]
  App-pay - 07092:Action not valid for registration: current salary for the potential asset Asg [ID 360168.1]
  Method of payment when opening errors: APP-COMPENSATION-07092: this process is not valid for the current record. [ID 289691.1

  Thank you
  Hussein

• When I click on my icon of firefox homepage says "the address is not a valid URL. The URL is not valid and cannot be loaded. How can I fix it?

  When I downloaded Mozilla Firefox and clicked on the Firefox icon I get this message on the Firefox homepage "the address is not valid.

  The URL is not valid and cannot be loaded. "I can always access the internet but what do I do to get rid of this message. The home page does not display the icon of firefox.

  You can check the setting of the homepage:

  • Tools > Options > general > startup: Homepage

  Firefox supports several home pages separated by ' |' symbol (pipe).

  • https://support.Mozilla.org/KB/how+to+set+the+home+page

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• I can't get my default address bar, whenever I try to do a search for it a message pops up saying that the address is not valid, that the URL is not valid

  I'm sure that you when it is able to search from the location bar, however I can't do that. If you just type a Word, a message appears saying it was not valid, or a valid url. If you type in a word associated with a web page, it will go to this page... for example, if you type in the fire engine, I get the message, but if I type in snopes, it goes to www.snopes .com

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  One possible cause is security software (firewall, antivirus) that prevents or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls

  Do a clean reinstall and remove the Firefox program folder before reinstalling a new copy of Firefox.

  • C:\Program Files\Mozilla Firefox\
  • http://KB.mozillazine.org/Installation_directory

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 16.0.x: http://www.mozilla.org/en-US/firefox/all.html

  Uninstall your current version of Firefox, if possible, the settings in the software security and cleaning of the Windows registry.

  • Do NOT remove the data personal when you uninstall your current version of Firefox, because all profile files will be deleted and you will also lose your personal data such as bookmarks and passwords from other versions of Firefox profiles.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • http://KB.mozillazine.org/Uninstalling_Firefox

  Your bookmarks and other profile data is stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but make sure that 'delete personal data' is NOT selected when you uninstall Firefox.

  If you keep problems also create a new profile.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• URL invalid the requested URL ' / ', is not valid. Reference #9.a2fc54b8.1345130184.5cbbba6

  At least once a day on my work PC Desktop I type in Yahoo.com or Amazon.com or any other popular site valid and all of a sudden, I get the error message "Security Exception" and when I select to confirm then I get:

  "Invalid URL".
  The URL requested ' / ', is not valid.

  "Reference #9.a2fc54b8.1345130184.5cbbba6.

  At that time there cannot access this site at all. So, I have to erase all history and restart my computer, at least once a day and hope it works. I scanned the support forum and I did everything what they suggest: disabled all addons (no not that I still), reset Firefox, restart in safe mode. Nothing works, it's very frustrating. She totally interrupts my work day. Help!

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  See also:

  • http://KB.mozillazine.org/Error_loading_websites

  You can try to reset (power off / on) of the router.

  One possible cause is security software (firewall, antivirus) that prevents or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls

  You can also do a check of malware with some digitization programs of malicious software on the Windows computer.

  See:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • http://support.Kaspersky.com/viruses/solutions?QID=208280684

• Error "requested attribute is not valid.

  I'm looking to get a program (and ultimately define) attributes camera with CVI. I can get the values attribute, such as ROI_WIDTH to the imgGetAttribute function, but not all and not that I really need access, which are 'Exposure time' and 'Gain value'. I can see and set the exposure time and acquire the value of the attributes of camera in MAX. However, when I try to use the function imgGetCameraAttributeString in IMAQ for these attributes, I get the error "the requested attribute is not valid. My camera is the Basler acA2040 - 180km. In all other respects - alignment, etc. the camera grabbing interface, works great.

  I don't see what I am doing wrong or miss this piece, but it's obviously something. I took the example of OR 'Attributes analog' as a point of departure, but that generates the same mistakes. How MAX can handle these attributes of the camera, but I can't in CVI? Is there some piece of missing configuration?

  I'm a little new to this environment, but would appreciate a lot of help, someone has.

  Thanks in advance,

  Wayne Showalter

  Hi Wayne,

  IMAQ differerentiates in the behavior and the API regarding the "IMAQ attributes" (defined by the IMAQ driver) and 'Camera' (defined in the file of the camera). All those with fixed constants (such as ROI_WIDTH) are attributes IMAQ while those who precisely to put something in the camera picture is of the attributes of the camera. You will need to use the API to Get/SetCameraAttribute for those. There are different functions of string vs. numeric attributes. I suspect that if you call it with imgSetCameraAttributeNumeric() it will work.

  Eric

• REF InsertedVI of high school still not valid when using VI Server

  I'm trying to access subpanel controls (in an executable file) via the server of VI, but he doesn't seem to be allowing me to get a valid reference to the inserted VI (1026: VI reference is invalid).  If I use the same code in the executable itself, it works fine.

  The executable file and the VI that I use to try to get a reference to the Secondary VI is attached.

  Any ideas why this happens?

  OK, I see the problem, VI references are local to the instance of LabVIEW that generate them. When you read the VI reference, you get the correct numeric value (as evidenced by the fact that it is zero). However, in the development environment from which you access the executable, the reference is not valid. This reference is only valid in the environment of the executable. What you need to do in the executable is to get the name of the VI in high school, when you insert it and store that name in a FGV. Then from your remote application, read this FGV - and you will have the name of VI.

  Mike...

• to windows media player 11 validation tool is not valid

  I've mentioned before - why hasn't it been resolved? The validation tool on the download page for Windows Media Player 11 is not valid - at least this is the error message when I try to run it. http://www.Microsoft.com/en-us/download/exe-validation.aspx?ID=8163

  Now you HAVE access to all download using Internet Explorer 32 bit - MS broke the ActiveX and methods of alternative validation for all other browsers.

  They seem to not hurry to solve this problem, either :(

• URLS suddenly not valid... and a lot more (worse)

  Earlier, I got this when trying to access a web site:

  URL invalid the requested URL ' / ', is not valid.

  Reference #9.87cc8f18.1290546177.eeb029

  THIS happens for different sites (most sites is large enough; newspapers, etc.). HOWEVER, and perhaps a little later, my internet connection stops. I can get to some network drives, I can ping websites, but not recover files through HTTP. Reset is the only way to solve it.

  I have two computers connected to a linksys router. The XP has these problems at least once a day; the Win7 has never no problem. Problems occur all of a sudden. I tried to turn the market as well as the cable modem router. Is not serious. BUT only the XP computer is affected. Any ideas where I should look?

  Check your HTTP and HTTPS protocols.  See www.oehelp.com/ielnk.aspx
   
  Steve
   
  wrote in message News: * e-mail address is removed from the privacy *...

  Earlier, I got this when trying to access a web site:

  URL invalid the requested URL ' / ', is not valid.

  Reference #9.87cc8f18.1290546177.eeb029

  THIS happens for different sites (most sites is large enough; newspapers, etc.). HOWEVER, and perhaps a little later, my internet connection stops. I can get to some network drives, I can ping websites, but not recover files through HTTP. Reset is the only way to solve it.

  I have two computers connected to a linksys router. The XP has these problems at least once a day; the Win7 has never no problem. Problems occur all of a sudden. I tried to turn the market as well as the cable modem router. Is not serious. BUT only the XP computer is affected. Any ideas where I should look?