Rows in the table are break on separate pages...

I have 20 lines equipped table:

first 3 lines are on one page, then half of the page is empty hen remaining 17 rows is on the second page.

How can I keep table to break the lines. I want all rows in the table to succeed himself.

Help, please. Thank you.

Keep them with parameters are in the table > Format > Format line...

Note: the first row on the second page may also have a start parameter that indicates that it is at the top of a page or column.

The control of widows and orphans just specifies how many rows to keep together (widow is the first page; ( orphan , is the second page) when a table has over a page. The higher the number, the more lines are forced to remain together.

Tags: Adobe FrameMaker

Similar Questions

  • all rows in the table are not eligible for the specified partition

    SQL > Alter Table ABC
    Exchange 2 Partition P1 with Table XYZ;

    Modified table.

    SQL > Alter Table ABC
    Exchange 2 Partition P2 with Table XYZ;


    P2 Partition Exchange with XYZ Table
    *
    ERROR on line 2:
    ORA-14099: all rows in the table are not eligible for the specified partition

    The exchange partition works fine for the first time. However, if we try to swap the 2nd partition it gives the error.
    How to solve this error?
    How can I find the lines which are not qualified for a specific part. is there a query to find out the same thing?

    >
    Well, exchange of syntax and logic is not clearly as it should (IMHO). There is no element of syntax that tells Oracle we want to Exchange partition data in a table that is not partitioned or not partitioned into partition table data.
    >
    What? Not sure where you got that but maybe it was before you had first cup of coffee? ;)

    An "Exchange", it's just that; an Exchange. Partition data end up in the non-partitioned table and vice versa. It is meaningless and totally obsolete if "we want Exchange partition data in a table that is not partitioned or not partitioned into partition table data".
    >
    It was decided by Oracle not partitioned table control. If the non-partitioned table is empty, it means you want to Exchange data partition in a non-partitioned table. And if not partitioned table is not empty, it means you want to Exchange data in the table that is not partitioned into partition.
    >
    There is no decision to make. The segments are swapped. Oracle doesn't check, know or even care if one or the other or both segments are empty. 'Control' which is carried out (by default except if NO CONTROL is used) only consists of ensuring all the data in the segment intended for the partition belongs to this partition.

    It is what gives the example of John. This can NEVER work if table1 is empty unless p1 is empty at the beginning:
    1 Exchange p1 with table1
    2 Exchange p2 with table1

    As John explains, assuming that no other operations are trying to put the data from p1 P2 which is not possible if p1 actually contains data.

    You can save it for next April 1!

  • Why a whole page of rows in the table is duplicate in FrameMaker 10?

    I have a long table in one of my chapters in FrameMaker 10. The table is seven pages long, but a whole page of dollars of rows in the table is duplicated, if the table really should only be six pages long. The first four pages look like this:

    Page 1: Lines 1-7

    Page 2: Lines 8-16

    Page 3: Lines 8-16

    Page 4: Lines 17-28

    Headers and footers are completely unaffected. All the markers from index in the rows of the table are also doubled, so all of the Page 3 index markers are also appearing in the IX file. I've combed through the file on unresolved references, but I can't find. Also, if I insert a blank line in Page 2, all lines is duplicated is no longer. If I insist on the entire table, Page 2 does not seem to be highlighted. I can't select or change anything on the Page 2.

    I'm absolutely baffled why this is happening. A glimpse of what is causing this rowset ghosts to appear?

    Some ideas to play with:

    • Did you wash MIF file to clean small codes that may have been imported?
    • Have you checked the duplicate lines to check that they are defined in the body and not header?

  • I create a form based on two tables that have sequences also. When I create insert only row is inserted in the fields in table first and second fields of the table are empty. Why?

    Mr President.

    I create a form based on two tables that have sequences also. When I create insert only row is inserted in the fields in table first and second fields of the table are empty. Why?

    formdoubletables.png

    the page source is

    <?xml version='1.0' encoding='UTF-8'?>
<ui:composition xmlns:ui="http://java.sun.com/jsf/facelets" xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
                xmlns:f="http://java.sun.com/jsf/core">
  <af:panelFormLayout id="pfl1">
    <af:group id="Group">
      <af:inputText value="#{bindings.VoucherId.inputValue}" label="#{bindings.VoucherId.hints.label}"
                    required="#{bindings.VoucherId.hints.mandatory}" columns="#{bindings.VoucherId.hints.displayWidth}"
                    maximumLength="#{bindings.VoucherId.hints.precision}"
                    shortDesc="#{bindings.VoucherId.hints.tooltip}" id="it1">
        <f:validator binding="#{bindings.VoucherId.validator}"/>
        <af:convertNumber groupingUsed="false" pattern="#{bindings.VoucherId.format}"/>
      </af:inputText>
      <af:inputDate value="#{bindings.VoucherDate.inputValue}" label="#{bindings.VoucherDate.hints.label}"
                    required="#{bindings.VoucherDate.hints.mandatory}"
                    columns="#{bindings.VoucherDate.hints.displayWidth}"
                    shortDesc="#{bindings.VoucherDate.hints.tooltip}" id="id1">
        <f:validator binding="#{bindings.VoucherDate.validator}"/>
        <af:convertDateTime pattern="#{bindings.VoucherDate.format}"/>
      </af:inputDate>
      <af:inputText value="#{bindings.Credit.inputValue}" label="#{bindings.Credit.hints.label}"
                    required="#{bindings.Credit.hints.mandatory}" columns="#{bindings.Credit.hints.displayWidth}"
                    maximumLength="#{bindings.Credit.hints.precision}" shortDesc="#{bindings.Credit.hints.tooltip}"
                    id="it2">
        <f:validator binding="#{bindings.Credit.validator}"/>
      </af:inputText>
    </af:group>
    <af:group id="g1">
      <af:inputText value="#{bindings.Lineitem.inputValue}" label="#{bindings.Lineitem.hints.label}"
                    required="#{bindings.Lineitem.hints.mandatory}" columns="#{bindings.Lineitem.hints.displayWidth}"
                    maximumLength="#{bindings.Lineitem.hints.precision}" shortDesc="#{bindings.Lineitem.hints.tooltip}"
                    id="it3">
        <f:validator binding="#{bindings.Lineitem.validator}"/>
        <af:convertNumber groupingUsed="false" pattern="#{bindings.Lineitem.format}"/>
      </af:inputText>
      <af:inputText value="#{bindings.VoucherId1.inputValue}" label="#{bindings.VoucherId1.hints.label}"
                    required="#{bindings.VoucherId1.hints.mandatory}"
                    columns="#{bindings.VoucherId1.hints.displayWidth}"
                    maximumLength="#{bindings.VoucherId1.hints.precision}"
                    shortDesc="#{bindings.VoucherId1.hints.tooltip}" id="it4">
        <f:validator binding="#{bindings.VoucherId1.validator}"/>
        <af:convertNumber groupingUsed="false" pattern="#{bindings.VoucherId1.format}"/>
      </af:inputText>
      <af:inputText value="#{bindings.Debit.inputValue}" label="#{bindings.Debit.hints.label}"
                    required="#{bindings.Debit.hints.mandatory}" columns="#{bindings.Debit.hints.displayWidth}"
                    maximumLength="#{bindings.Debit.hints.precision}" shortDesc="#{bindings.Debit.hints.tooltip}"
                    id="it5">
        <f:validator binding="#{bindings.Debit.validator}"/>
      </af:inputText>
      <af:inputText value="#{bindings.Credit1.inputValue}" label="#{bindings.Credit1.hints.label}"
                    required="#{bindings.Credit1.hints.mandatory}" columns="#{bindings.Credit1.hints.displayWidth}"
                    maximumLength="#{bindings.Credit1.hints.precision}" shortDesc="#{bindings.Credit1.hints.tooltip}"
                    id="it6">
        <f:validator binding="#{bindings.Credit1.validator}"/>
      </af:inputText>
      <af:inputText value="#{bindings.Particulars.inputValue}" label="#{bindings.Particulars.hints.label}"
                    required="#{bindings.Particulars.hints.mandatory}"
                    columns="#{bindings.Particulars.hints.displayWidth}"
                    maximumLength="#{bindings.Particulars.hints.precision}"
                    shortDesc="#{bindings.Particulars.hints.tooltip}" id="it7">
        <f:validator binding="#{bindings.Particulars.validator}"/>
      </af:inputText>
      <af:inputText value="#{bindings.Amount.inputValue}" label="#{bindings.Amount.hints.label}"
                    required="#{bindings.Amount.hints.mandatory}" columns="#{bindings.Amount.hints.displayWidth}"
                    maximumLength="#{bindings.Amount.hints.precision}" shortDesc="#{bindings.Amount.hints.tooltip}"
                    id="it8">
        <f:validator binding="#{bindings.Amount.validator}"/>
        <af:convertNumber groupingUsed="false" pattern="#{bindings.Amount.format}"/>
      </af:inputText>
    </af:group>
    <f:facet name="footer">
      <af:button text="Submit" id="b1"/>
      <af:button actionListener="#{bindings.CreateInsert.execute}" text="CreateInsert"
                 disabled="#{!bindings.CreateInsert.enabled}" id="b2"/>     
      <af:button actionListener="#{bindings.Commit.execute}" text="Commit" disabled="#{!bindings.Commit.enabled}"
                 id="b3"/>
      <af:button actionListener="#{bindings.Rollback.execute}" text="Rollback" disabled="#{!bindings.Rollback.enabled}"
                 immediate="true" id="b4">
        <af:resetActionListener/>
      </af:button>
    </f:facet>
  </af:panelFormLayout>
</ui:composition>

    Concerning

    Go to your VO Wizard, select the tab of the entity and to check if both the EO is editable or not.

    See you soon

    AJ

  • Exception of null on the list pointer implementing values when there are n rows in the table

    Hi Experts,

    I use JDev 11.1.1.7.

    I have a VO that I defined a LOV with no search box. In my page, I've added it as af:inputListOfValues, but when there is no rows in the table that I will meet with NPES

    < AdfcExceptionHandler > < handleException > ADFc: when Manager application exception exception handling threw a new exception.

    java.lang.NullPointerException

    at oracle.jbo.uicli.binding.JUCtrlListBinding.findOrCreateLOVDialogIteratorBinding(JUCtrlListBinding.java:5188)

    at oracle.adfinternal.view.faces.model.binding.FacesCtrlLOVBinding.getSearchBinding(FacesCtrlLOVBinding.java:204)

    to oracle.adfinternal.view.faces.model.binding.FacesCtrlLOVBinding$ ListOfValuesModelImpl.getSearchRegion (FacesCtrlLOVBinding.java:2001)

    to oracle.adfinternal.view.faces.model.binding.FacesCtrlLOVBinding$ ListOfValuesModelImpl.getQueryModel (FacesCtrlLOVBinding.java:1612)

    to oracle.adfinternal.view.faces.renderkit.rich.SimpleInputListOfValuesRendererBase$ InternalLaunchPopupListener.processLaunch (SimpleInputListOfValuesRendererBase.java:1560)

    at oracle.adf.view.rich.event.LaunchPopupEvent.processListener(LaunchPopupEvent.java:108)

    Excerpt from JSFF:

    < af:inputListOfValues id = "xxx" popupTitle = "" search and select: XXX ""

    simple value = "#{pageFlowScope.SearchBean.xxx}" = 'true' "

    model = ' #{bindings. " XXXLOV.listOfValuesModel} "columns ="30"

    searchDesc = "Select XXX" >

    < / af:inputListOfValues >

    PageDef:

    < listOfValues StaticList = 'false' use = "LOV_XXX".

    IterBinding = "XXXIterator".

    ID = "XXXLOV" / >

    Is - this bug?

    Surprisingly, it works very well if there are lines in the table that the VO is querying.

    -Soham

    Soham,

    I think you just create this LOV page by simply moving the VO, right?

    You can select the box to tick 'Include no. Selection' in your VO, and see if that helps?

    See you soon

    AJ

  • Rows in the table LT until merger of all workspaces

    Database 11.2.0.4

    In our environment, we ran a few important updates in the workspaces and then merged these live workspaces.  Up to 25% of the data has been updated in those workspaces.  When these update batch workspaces have been created, previous workspaces exist who are not yet ready for the merger.

    I noticed that the underlying tables of the LT now have about 25% more lines than the live view.  We have now discovered that dbms_wm.refreshWorkspace works really poor.  This statement is used to take seconds or minutes to the maximum, but can now take half an hour or more.

    We recorded a support with Oracle request and provided details of the plan to see if we can get some resolution/advice explaining.

    In the meantime, I have a question for the forum help my understanding of the works of the Manager of the workspace.

    In the example below, I have table "wm_test_table", "test_workspace1" and "test_workspace2".  In "test_workspace1", I update all rows in the table - the table LT now has 2 rows for each record.  I merge 'test_workspace1' live and LT still has 2 rows for each record.  The other lines are not removed until "test_workspace2" is merged and removed. 


    SQL> -- Create a test table
SQL> create table wm_test_table (
  2     id integer primary key,
  3     name varchar2(100));


Table created.


SQL> -- Insert 1,000 rows
SQL> insert into wm_test_table (
  2     select rownum, 'before'
  3     from dual
  4     connect by level <= 1000);


1000 rows created.


SQL> commit;


Commit complete.


SQL> -- Version enable it
SQL> execute dbms_wm.enableVersioning('wm_test_table');


PL/SQL procedure successfully completed.


SQL> -- Create two workspaces
SQL> execute dbms_wm.createWorkspace('test_workspace1');


PL/SQL procedure successfully completed.


SQL> execute dbms_wm.createWorkspace('test_workspace2');


PL/SQL procedure successfully completed.


SQL> -- Go to test_workspace1 and update all the rows
SQL> execute dbms_wm.goToWorkspace('test_workspace1');


PL/SQL procedure successfully completed.


SQL> update wm_test_table set name = 'after';


1000 rows updated.


SQL> commit;


Commit complete.


SQL> -- Check how many rows in wm_test_table_lt - we expect 2,000 as we haven't merged yet
SQL> select count(*) from wm_test_table_lt;


  COUNT(*)
----------
      2000


SQL> -- Merge and remove test_workspace1
SQL> execute dbms_wm.goToWorkspace('LIVE');


PL/SQL procedure successfully completed.


SQL> execute dbms_wm.mergeWorkspace('test_workspace1', remove_workspace=>true);


PL/SQL procedure successfully completed.


SQL> -- Check how many rows in wm_test_table_lt
SQL> -- I'd hope there'd only be 1,000 but there is 2,000
SQL> select count(*) from wm_test_table_lt;


  COUNT(*)
----------
      2000


SQL> -- Let's see if compressWorkspace will get rid of them
SQL> execute dbms_wm.compressWorkspace( -
>       workspace => 'LIVE',   -
>       auto_commit => true,   -
>       remove_latest_deleted_rows => true);


PL/SQL procedure successfully completed.


SQL> -- They're still there
SQL> select count(*) from wm_test_table_lt;


  COUNT(*)
----------
      2000


SQL> -- Now merge test_workspace2
SQL> execute dbms_wm.mergeWorkspace('test_workspace2', remove_workspace=>true);


PL/SQL procedure successfully completed.


SQL> -- and the additional 1,000 rows are removed
SQL> select count(*) from wm_test_table_lt;


  COUNT(*)
----------
      1000

    Is it possible to safely remove the extra lines in LT without waiting until we merged the workspaces that existed before the update batch has been done?  I hope that it will so improve the performance of refreshWorkspace.


    I thought that something like this can do, but it does not remove the other ranks, is:

    execute dbms_wm.PurgeTable(
 table_id => 'test.wm_test_table', 
 archive_table => null, 
 where_clause => 'id not in (select id from test.wm_test_table)', 
 instant=>null, 
 workspace => 'LIVE', 
 purgeAfter => false);

    This question is similar to

    Lines left in the table LT after removal of the direct workspace and the removal of all workspaces

    and

    How to delete soft deleted records?

    but I'm still not sure.

    Thank you

    John

    Hello

    This behavior is expected and it is due to the test_workspace2 workspace.  A compression operation will not allow compressed range to include a backup implicit point that is created for a child workspace.  This is done to preserve the integrity of this workspace.  The initial 1000 lines are all lines that are visible from test_workspace2.  Removal of these lines would leave test_workspace2 will 0 lines in there.  Lines 1000 updates are the lines that do not appear on LIVE.  So, given that the two sets of lines are needed, none of the lines can be deleted physically.  A compression operation will never change the view of data for any workspace.  It only removes the unnecessary records.  The two options in order to be able to compress these lines is to either delete (as you did) or refresh test_workspace2.  The refresh operation would move the implicit savepoint for the workspace to a version that isn't after all 2000 lines in the table _LT and allow the dressing to remove first half of them because they are no longer needed by any child workspace.

    With respect to the performance of RefreshWorkspace, I would need to see a trace of the transaction file.  But who should rather get through the SR you filed.

    Kind regards

    Ben

  • Select the row in the table to change in a form

    Hi all

    I use Jdeveloper 12.1.3.0.0 on windows internet explore 10.

    I have the following form and the read-only table. the form and the table that are both on the same object from view.

    click_edit.png

    When the user clicks a row in the table, I want to choose this line in the form above for editing purpose.

    How would I do that? the first column of the table is a primary key.

    I followed shayjdev vedio http://www.youtube.com/watch?v=e0IcnXLJUgU

    but the problem is that when I click the button CreateInsert (5th button left in my case), never clear the form for the opening of new record, instead, he put the table in input mode.

    kindly help me with this.

    Thank you.

    To create a new line, you drag the operation createInsert of the data control on the create new"" button. This should create the new row.  If you like the new line being the last of them using the link from dvohra21 to https://blogs.oracle.com/jdevotnharvest/entry/how_to_add_new_adf

    In this case, you must change the listener to the button action to point to the generation of listener action code of Frank.

    Timo

  • LOV in richeTableau resets the value after the deletion of rows from the table

    Hello. I'm on 11g R2

    I have a table with columns in the box and a button in the toolbar that removes the lines checked

    I have build it based on the following article in her string code

    http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/index-101235.html


    When I run the "delete" button I execute the following code (taken as is article)


    public void deleteSelectedRows() {}

    create a second line, the value do not affect all lines

    used in ADF

    Set of rows duplicateRowSet = this.createRowSet ("duplicateRowSet");

    first row to avoid "the attempt to access the value of lines."

    exception line was dead.

    duplicateRowSet.first ();

    retrieve the current row of the table for after

    re-running the VO

    Line currentRow = this.getCurrentRow ();

    Boolean currentRowDeleted = false;

    get all rows that have the transoent attribute

    "MarkForDelete' set to true

    Row [] rowsToDelete =

    duplicateRowSet.getFilteredRows ("MarkedForDelete", true);

    If (rowsToDelete.length > 0) {}

    run only throizgh this code, if there is something to

    delete

    for (line rw: rowsToDelete) {}

    If the row is marked as the current in VO, ts value

    Boolean flag

    If (rw.getKey () .equals (currentRow.getKey ())) {}

    currentRowDeleted = true;

    }

    remove the line - do not yet commit

    RW. Remove();

    }

    rerun VO

    this.executeQuery ();

    reset the current line if it has not been removed

    If (! currentRowDeleted) {}

    this.setCurrentRow (currentRow);

    }

    duplicateRowSet.closeRowSet ();

    }

    }

    "MarkedForDelete" is a transient attribute used to mark the line delete

    The lines are removed very well.

    The problem is with lines that I do not delete.

    For example I LOV column. I chose the value LOV in a few lines, and after that choose to delete several lines (not the same lines where I modified the LOV) but some other lines.

    After I click "delete", the lines that I marked to remove deleted indeed, but the value of the LOV in other rows (I have not scored for delete) are disabled.

    How to preserve value LOV so it will remain also after I deleted some lines?

    P.S. I've tried autosubmit = "true" - it did not help

    It is expected because I see that you rerun the query.

    Once you re - run, it retrieves from the database again. Thus, your values are lost because they are not posted.

    I don't think that run query is necessary, try to have a programmatic part trigger on the table after you remove all of the lines.

    Thank you

    Alisson.

  • How to adapt the rows in the table spans several pages in proportion to an image?

    Hi all

    I have a fairly large excel file (more than 2000 lines) imported, and the resulting table spans more than 150 pages.

    The problem is that the lines don't always fill the height of the text block (height of 9.5 ") on every page.

    I don't like that the lines are of different sizes. I want just the lower edges of tables on each page to be in the same place.

    By dragging the line down with the SHIFT key does not work if the table spans several pages/text blocks.

    Is it possible to force the selected lines (or stored in a block of text) proportionally fill their block of text?

    It is really not any function automatic adjustment that apply at the height of the row in the table directly, then I suspect that you're not going to find a way to do this is automatic.

    If it was my document, I would consider (something like) do this:

    Find the highest line in the table. (Or, perhaps that if there is some exceptionally high lines; unobtrusively manipulate them and use the 2nd or 3rd highest line as a reference.) Calculate the number of lines (max number of) of this size will fit in each text block. Divide the height of the block of text by this number to get a line height that adapts the same number of lines in each image. Then, select the entire table and all rows from this height. Follow up with the typographic settings that help uniform line height look resolutely.

  • Determine the space used for each row in the table

    I am trying to determine how much disk space each row in the table will take place (data and indexes). I use sys_guids for my (PK_ID) primary key and foreign key columns (FK_xx), so who are on varchar2 (32).

    What is the best way to determine this?


    CREATE TABLE STU_ENROLLMENT
    (PK_ID VARCHAR2 (32), sys_guid() by default)
    CONSTRAINT pk_stu_enrollment
    KEY ELEMENTARY SCHOOL
    With the HELP of INDEX TABLESPACE sis_express_index
    STORAGE (4096 INITIAL
    NEXT 4096
    PCTINCREASE 0),.
    FK_STU_SCHOOL VARCHAR2 (32)
    FK_SCHOOL_CALENDAR VARCHAR2 (32)
    FK_PCC_CODE VARCHAR2 (32),
    FK_GRADE_LEVEL VARCHAR2 (32),
    FK_VOTECH VARCHAR2 (32),
    FK_SPECIAL_ED VARCHAR2 (32),
    FK_TUITION_CODE VARCHAR2 (32),
    FK_HOME_INSTRUCTION VARCHAR2 (32),
    FK_DISTRICT VARCHAR2 (32),
    FK_PROGRAM_CODE VARCHAR2 (32),
    FK_SERVING_SCHL VARCHAR2 (32),
    FK_RESPONSIBLE_SCHL VARCHAR2 (32),
    FK_ADA_CODE VARCHAR2 (32),
    FK_ENROLL_TYPE VARCHAR2 (32),
    FK_PCC_REASON VARCHAR2 (32),
    STANDARD_DAY NUMBER (3).
    PCC_NOTES VARCHAR2 (1000).
    USER_FLD1 VARCHAR2 (100),
    USER_FLD2 VARCHAR2 (100),
    USER_FLD3 VARCHAR2 (100),
    USER_FLD4 VARCHAR2 (100),
    USER_FLD5 VARCHAR2 (100),
    PCC_TRANSACTION_ID VARCHAR2 (32),
    TRANSACTION_NUMBER DEFAULT NUMBER '1',
    TRANSACTION_TYPE VARCHAR2 (1) DEFAULT 'A,'
    DATE OF LAST_UPDATE_DATE,
    LAST_UPDATE_USER VARCHAR2 (100))
    TABLESPACE sis_express_base
    STORAGE (5120 INITIAL
    NEXT 5120
    PCTINCREASE 0);

    CREATE INDEX STU_ENROLLMENT_I ON STU_ENROLLMENT (FK_STU_SCHOOL, FK_SCHOOL_CALENDAR, FK_PCC_CODE) SINGLE
    TABLESPACE sis_express_index
    STORAGE (4096 INITIAL
    NEXT 4096
    PCTINCREASE 0);

    CREATE INDEX STU_ENROLLMENT_I2 ON STU_ENROLLMENT (FK_SCHOOL_CALENDAR)
    TABLESPACE sis_express_index
    STORAGE (4096 INITIAL
    NEXT 4096
    PCTINCREASE 0);

    CREATE INDEX STU_ENROLLMENT_I3 ON STU_ENROLLMENT (FK_PCC_CODE)
    TABLESPACE sis_express_index
    STORAGE (4096 INITIAL
    NEXT 4096
    PCTINCREASE 0);

    CREATE INDEX STU_ENROLLMENT_I4 ON STU_ENROLLMENT (FK_GRADE_LEVEL)
    TABLESPACE sis_express_index
    STORAGE (4096 INITIAL
    NEXT 4096
    PCTINCREASE 0);

    CREATE INDEX STU_ENROLLMENT_I5 ON STU_ENROLLMENT (FK_VOTECH)
    TABLESPACE sis_express_index
    STORAGE (4096 INITIAL
    NEXT 4096
    PCTINCREASE 0);

    CREATE INDEX STU_ENROLLMENT_I6 ON STU_ENROLLMENT (FK_SPECIAL_ED)
    TABLESPACE sis_express_index
    STORAGE (4096 INITIAL
    NEXT 4096
    PCTINCREASE 0);

    CREATE INDEX STU_ENROLLMENT_I7 ON STU_ENROLLMENT (FK_TUITION_CODE)
    TABLESPACE sis_express_index
    STORAGE (4096 INITIAL
    NEXT 4096
    PCTINCREASE 0);

    CREATE INDEX STU_ENROLLMENT_I8 ON STU_ENROLLMENT (FK_HOME_INSTRUCTION)
    TABLESPACE sis_express_index
    STORAGE (4096 INITIAL
    NEXT 4096
    PCTINCREASE 0);

    CREATE INDEX STU_ENROLLMENT_I9 ON STU_ENROLLMENT (FK_DISTRICT)
    TABLESPACE sis_express_index
    STORAGE (4096 INITIAL
    NEXT 4096
    PCTINCREASE 0);

    CREATE INDEX STU_ENROLLMENT_I10 ON STU_ENROLLMENT (FK_PROGRAM_CODE)
    TABLESPACE sis_express_index
    STORAGE (4096 INITIAL
    NEXT 4096
    PCTINCREASE 0);

    CREATE INDEX STU_ENROLLMENT_I11 ON STU_ENROLLMENT (FK_SERVING_SCHL)
    TABLESPACE sis_express_index
    STORAGE (4096 INITIAL
    NEXT 4096
    PCTINCREASE 0);

    CREATE INDEX STU_ENROLLMENT_I12 ON STU_ENROLLMENT (FK_RESPONSIBLE_SCHL)
    TABLESPACE sis_express_index
    STORAGE (4096 INITIAL
    NEXT 4096
    PCTINCREASE 0);

    CREATE INDEX STU_ENROLLMENT_I13 ON STU_ENROLLMENT (FK_ADA_CODE)
    TABLESPACE sis_express_index
    STORAGE (4096 INITIAL
    NEXT 4096
    PCTINCREASE 0);

    CREATE INDEX STU_ENROLLMENT_I14 ON STU_ENROLLMENT (FK_ENROLL_TYPE)
    TABLESPACE sis_express_index
    STORAGE (4096 INITIAL
    NEXT 4096
    PCTINCREASE 0);

    CREATE INDEX STU_ENROLLMENT_I15 ON STU_ENROLLMENT (FK_PCC_REASON)
    TABLESPACE sis_express_index
    STORAGE (4096 INITIAL
    NEXT 4096
    PCTINCREASE 0);

    CREATE INDEX STU_ENROLLMENT_I16 ON STU_ENROLLMENT (PCC_TRANSACTION_ID)
    TABLESPACE sis_express_index
    STORAGE (4096 INITIAL
    NEXT 4096
    PCTINCREASE 0);

    CREATE INDEX STU_ENROLLMENT_I17 ON STU_ENROLLMENT (FK_STU_SCHOOL, PCC_TRANSACTION_ID, PK_ID)
    TABLESPACE sis_express_index
    STORAGE (4096 INITIAL
    NEXT 4096
    PCTINCREASE 0);

    Hello

    The maximum size of the row in the table

    Select table_name, ROUND (sum (data_length) / 1024,2) SIZE_IN_KB
    of user_tab_cols
    where table_name = 'STU_ENROLLMENT '.
    TABLE_NAME GROUP;

    +

    Select index_name table_name, ROUND (sum (CHAR_LENGTH) / 1024,2) SIZE_IN_KB
    of USER_IND_COLUMNS
    where table_name = 'STU_ENROLLMENT '.
    GROUP BY index_name table_name;

    See the size of the table - method with the average row size

    Concerning
    Hitgon

    Published by: hitgon on May 2, 2012 18:19

    Published by: hitgon on May 2, 2012 18:39

  • Selection of the table and clicks by only clicking on the row in the table

    My dilemma is that we create an interface that is a touch screen interface. It's base table. Currently, I have a button integrated in each row of the table when you click the button, it takes you to a selected line details window. What I want to happen is to completely remove the button and have the line to act as a button - you click on the line (anywhere in the line) and the action takes you to the details screen - the same model as the use of smart phones. I have the table selection listener in support of bean (hanging on a generic selection listener that I created) and selection of listener method calls the string that starts the movement of workflow. I there prints that tell me that these methods are called, but I don't get any action when I click on the row in the table.

    This is the code in the .jsff file:

    + < af:table value = "#{bindings.drives.collectionModel}" var = "row" + "
    + Rows = "#{Bindings.drives.rangeSize}" +.
    + EmptyText = "#{Bindings.drives.Viewable?" "{'No data to display.': 'Access Denied.'}". +
    + fetchSize = "#{Bindings.drives.rangeSize}" +.
    + rowBandingInterval = "1" id = "t1" rowSelection = 'single ' +.
    + width = '100% ' contentDelivery = 'immediate ' +.
    + columnResizing = 'disabled' autoHeightRows = '30 ' +.
    + columnStretching = "column: c7 ' disableColumnReordering = 'true ' +.
    + selectionListener = "#{DriveBean.onSelectionChange}" +.
    + partialTriggers =': t1 "> +"

    The 'onSelectionChange' method looks like this:

    + ' public void onSelectionChange (SelectionEvent selectionEvent) {+
    + GenericTableSelectionHandler.makeCurrent (selectionEvent); +
    + goToDriveProperties(); +
    +}+

    + public String goToDriveProperties() {+
    + return "gotoProperties"; +
    +}+

    The GenericTableSelectionHandler class looks like this:

    + public class GenericTableSelectionHandler {+
    + public GenericTableSelectionHandler() {+
    + super(); +
    +}+

    public static void makeCurrent (SelectionEvent selectionEvent) + {+
    + Table richeTableau = (RichTable) selectionEvent.getSource (); +
    + TableModel CollectionModel = (CollectionModel) table.getValue (); +
    + JUCtrlHierBinding adfTableBinding = (JUCtrlHierBinding) tableModel.getWrappedData (); +
    + DCIteratorBinding tableIteratorBinding = adfTableBinding.getDCIteratorBinding (); +
    + Object selectedRowDate = table.getSelectedRowData (); +
    + JUCtrlHierNodeBinding nodeBinding = selectedRowDate (JUCtrlHierNodeBinding); +
    + Key rwKey = nodeBinding.getRowKey (); +
    + tableIteratorBinding.setCurrentRowWithKey (rwKey.toStringFormat (true)); +
    +}+
    +}+

    I don't know what to do with that to initiate this movement of workflow. Can someone help me?

    The method used for navigation is NOT the navigation to the required page.

    public String goToDriveProperties() {}
    Return "gotoProperties";
    }

    Instead, call the navigation pro-grammatically Manager as follows:

    * public String goToDriveProperties() {*}
    FacesContext context = FacesContext.getCurrentInstance ();
    context.getApplication () .getNavigationHandler () .handleNavigation (context,
    NULL,
    * 'gotoProperties'); *
    }

  • Request from oracle to MySql using dblink read all rows in the table

    Hello
    I use the heterogeneous connectivity between oracle 10204 to the Mysql database.
    I have a database of link on the side of the oracle.
    I request a table in MySql with 10 million rows.

    His is not serious if I am running:
    ' Select * from ' CDR_Accounts"@mysql where 'id '= 7675405;
    or
    Select * from 'CDR_Accounts"@mysql;

    There is an index on the column id.
    It seems that the Mysql is feteching all rows in the table, all data is transferred to oracle on the dblink and only after the required lines are back to the client.

    The /etc/odbcinst.ini file is as follows:
    [odbcprd:oracle@odbc /software/oracle]$ cat /etc/odbcinst.ini
[myodbc3]
Description             = Mysql connector to mysql version 3.5
Driver          = /software/oracle/MysqlOdbc/3.52/lib/libmyodbc3-3.51.25.so
Driver64                = /usr/lib
Setup           = /software/oracle/MysqlOdbc/3.52/lib/libmyodbc3S-3.51.25.so
Setup64         = /usr/lib
UsageCount              = 1
CPTimeout               = 3600
CPReuse         =
    Please advice

    Thank you

    Initialization of gateway open tha file located in $ORACLE_HOME/hs/admin called init .ora and change HS_FDS_TRACE_LEVEL to HS_FDS_TRACE_LEVEL =WE.

    ATTENTION:
    Do not forget t turn off after all your tests.

  • Problem updated 16 rows, it updates all rows in the table

    I tried to update of 16 ranks with AL as the name of divion with the script as below:

    Update wire_center set a.wg_id = '63'
    where EXISTS (select b.div_name from wire_center, title b, area c, ns_workgroups d).
    where B.DIV_NAME =' al ' AND a.dis_id = c.dis_id and b.div_id = c.div_id and d.wg_id = a.wg_id);

    When I run it, it updates all rows in the table.

    However when I run the select subquery, it returns 16 ranks.

    It seems where EXISTS is the problem. If I exist, it gave me error ora-00936.

    How to fix? Need urgent help please. DB is 10g.

    Thanks in advance.

    If I understand correctly what you want, you must not include wire_center once again in the second select (in your clause).
    The second selection has no relationship to the table you're updating, so because select the second returns 16 rows, it is always set to true will. For each line. If all the rows will be updated.

    Instead of

    Update wire_center a set a.wg_id='63'
where EXISTS (select b.div_name from wire_center a, division b, district c, ns_workgroups d
where B.DIV_NAME='AL' AND a.dis_id=c.dis_id and b.div_id=c.div_id and d.wg_id=a.wg_id );

    Try this:

    Update wire_center a set a.wg_id='63'
where EXISTS (select b.div_name from division b, district c, ns_workgroups d
where B.DIV_NAME='AL' AND a.dis_id=c.dis_id and b.div_id=c.div_id and d.wg_id=a.wg_id );

    Published by: big on 29-dec-2010 14:27

  • Problem with the removal of the first row of the table

    Hi all

    I have a problem with my forms with tables where I have buttons to add or remove rows from the table. Adding the lines works fine but deleting lines has a problem when deleting the first row. Example: Here is a table with two rows where column 1 has the add and remove buttons and column 2 user imput that looks like this:

    Column 1
    		Column 2
    Add and remove buttons hererank 1
    Add and remove buttons hererank 2
    Add and remove buttons hererank 3

    If the user deletes line 2 the table looks like which is correct:

    Column 1
    		Column 2
    Add and remove buttons hererank 1
    Add and remove buttons hererank 3

    If the user deletes line 1 then the table looks like which is false since the ranks 2 and 3 should be left:

    Column 1
    		Column 2
    Add and remove buttons hererank 1
    Add and remove buttons hererank 3

    The code is pretty simple:

    Table3.row2.instanceManager.addInstance (1); for the click event of the button Add line

    Table3.row2.instanceManager.removeInstance (1); for the click event of the button Delete line

    What I am doing wrong?

    Thanks in advance!

    Al

    The expression will be based on your structure... done .This refers to the current object, parent refers to the container parent of this object and index is the index of this object. So watching your hierarchy and from the key, you will need this.parent to join the line subform is it in (usually it is th esubform that repeats). If it's in a subform, you will need to add another parent. Continue on this road until you get to the repeating subform and then ask its index. Your expression might look like this.parent.parent.parent.index. Using this.index, you find the instance of the button object and there are just people and that's why you always get 0.

    Make sense?

    BTW your form is attached not... so I can't check what you should put it.

    Paul

  • CFHTTP Parse page for the last row of the table

    OK, so I need to analyze the page returned from a cfhttp call and select the last row in a table. I then take the value of this line and run another cfhttp to another page. This returns an html page where I'll need to parse for extr the img tag. Any thoughts?

    Here is a code:

    "" < cfhttp url = ' http://SERVERNAME/GetPhotoEncounters.cgi ' method = 'post' resolveurl = "yes" >
    < name cfhttpparam = 'TXTBox' type = "formfield" value = "17133804" >
    < / cfhttp >

    He returns (at the source):

    "< form method = post name ="EncounterInfo"action =" http://SERVERNAME/GeneratePhotos.cgi "> "
    < table border units is relative width is 0.9 colspec "C2 C1 C1 C1 C1 C1 C1 C1 C1" = >
    < th align = center > < view h3 > < / h3 >
    < th align = center > < No. h3 > < / h3 >
    < th align = center > < ID h3 > < / h3 >
    < th align = center > < Type of encounter h3 > < / h3 >
    < th align = center > < h3 > Date & time < / h3 >
    < th align = center > < Type h3 > < / h3 >
    < th align = center > < system indicator X h3 > < / h3 >
    < th align = center > < location Images h3 > < / h3 >
    < th align = center > < h3 database Ind > < / h3 >
    <! - data - >
    < b >
    < td align = center > < input type = "checkbox" name = "eid" value = "36659622; 02/06/05 13:31:29 ">
    < td align = center > 36659622
    < td align = center > 17133804
    < td align = center > BP
    < td align = center > 02/06/05 13:31:29
    < td align = center > F
    < td align = center > ENF
    < td align = center > 967
    < td align = center > R
    < b >
    < td align = center > < input type = "checkbox" name = "eid" value = "37070943; 09/06/05 14:28:28 ">
    < td align = center > 37070943
    < td align = center > 17133804
    < td align = center > BP
    < td align = center > 09/06/05 14:28:28
    < td align = center > R
    < td align = center > ENF
    < td align = center > 968
    < td align = center > R
    < b >
    < td align = center > < input type = "checkbox" name = "eid" value = "38114421; 23/06/05 19:03:50 ">
    < td align = center > 38114421
    < td align = center > 17133804
    < td align = center > BP
    < td align = center > 23/06/05 19:03:50
    < td align = center > R
    < td align = center > ENF
    < td align = center > 968
    < td align = center > R
    < b >
    < td align = center > < input type = "checkbox" name = "eid" value = "38216303; 24/06/05 22:30:42 ">
    < td align = center > 38216303
    < td align = center > 17133804
    < td align = center > BP
    < td align = center > 24/06/05 22:30:42
    < td align = center > R
    < td align = center > ENF
    < td align = center > 968
    < td align = center > R
    < b >
    < td align = center > < input type = "checkbox" name = "eid" value = "41424139; 04/08/05 22:48:21 ">
    < td align = center > 41424139
    < td align = center > 17133804
    < td align = center > BP
    < td align = center > 04/08/05 22:48:21
    < td align = center > R
    < td align = center > ENF
    < td align = center > 968
    < td align = center > R
    < b >
    < td align = center > < input type = "checkbox" name = "eid" value = "42971024, 19/08/05 11:59:35" >
    < td align = center > 42971024
    < td align = center > 17133804
    < td align = center > BP
    < td align = center > 19/08/05 11:59:35
    < td align = center > R
    < td align = center > ENF
    < td align = center > 968
    < td align = center > R
    < b >
    < td align = center > < input type = "checkbox" name = "eid" value = "43676008, 15/09/05 00:43:33" >
    < td align = center > 43676008
    < td align = center > 17133804
    < td align = center > BP
    < td align = center > 15/09/05 00:43:33
    < td align = center > R
    < td align = center > ENF
    < td align = center > 968
    < td align = center > R
    < b >
    < td align = center > < input type = "checkbox" name = "eid" value = "51501911; 20/02/06 01:17:16 ">
    < td align = center > 51501911
    < td align = center > 17133804
    < td align = center > BP
    < td align = center > 20/02/06 01:17:16
    < td align = center > R
    < td align = center > ENF
    < td align = center > 970
    < td align = center > R
    < b >
    < td align = center > < input type = "checkbox" name = "eid" value = "52543143; 20/03/06 06:06:56 ">
    < td align = center > 52543143
    < td align = center > 17133804
    < td align = center > BP
    < td align = center > 20/03/06 06:06:56
    < td align = center > R
    < td align = center > ENF
    < td align = center > 971
    < td align = center > R
    < b >
    < td align = center > < input type = "checkbox" name = "eid" value = "52812077, 30/03/06 08:36:15" >
    < td align = center > 52812077
    < td align = center > 17133804
    < td align = center > BP
    < td align = center > 30/03/06 08:36:15
    < td align = center > R
    < td align = center > ENF
    < td align = center > 971
    < td align = center > R
    < b >
    < td align = center > < input type = "checkbox" name = "eid" value = "52983796; 07/04/06 15:15:32 ">
    < td align = center > 52983796
    < td align = center > 17133804
    < td align = center > BP
    < td align = center > 07/04/06 15:15:32
    < td align = center > R
    < td align = center > ENF
    < td align = center > 971
    < td align = center > R
    < b >
    < td align = center > < input type = "checkbox" name = "eid" value = "53243687; 23/04/06 14:58:23 ">
    < td align = center > 53243687
    < td align = center > 17133804
    < td align = center > BP
    < td align = center > 23/04/06 14:58:23
    < td align = center > R
    < td align = center > ENF
    < td align = center > 972
    < td align = center > R
    < b >
    < td align = center > < input type = "checkbox" name = "eid" value = "54447246; 24/06/06 00:46:23 ">
    < td align = center > 54447246
    < td align = center > 17133804
    < td align = center > BP
    < td align = center > 24/06/06 00:46:23
    < td align = center > R
    < td align = center > ENF
    < td align = center > 973
    < td align = center > R
    < b >
    < td align = center > < input type = "checkbox" name = "eid" value = "56717661; 05/07/06 06:45:19 ">
    < td align = center > 56717661
    < td align = center > 17133804
    < td align = center > BP
    < td align = center > 07/05/06 06:45:19
    < td align = center > R
    < td align = center > ENF
    < td align = center > 973
    < td align = center > R
    < b >
    < td align = center > < input type = "checkbox" name = "eid" value = "61073876; 28/08/06 02:13:33 ">
    < td align = center > 61073876
    < td align = center > 17133804
    < td align = center > BP
    < td align = center > 28/08/06 02:13:33
    < td align = center > R
    < td align = center > ENF
    < td align = center > 974
    < td align = center > R
    < /table >
    < /Center >
    < p align = "left" > < input type = "checkbox" name = "photoOnly" > < p >
    < INPUT TYPE = "SUBMIT" NAME = 'SUBMIT_BUTTON' VALUE = 'Show the photo (s)' >
    < INPUT TYPE = "BUTTON" NAME = "SELECT_ALL_BUTTON" VALUE = "Select all" onClick = "doSelectAll (15)" >
    < INPUT TYPE = "RESET" NAME = "CLEAR_ALL_BUTTON" VALUE = "Remove all" >
    < input type = "hidden" name = 'TXTBox' value = "17133804" >
    < br >
    < / make >

    I need the last row of the table checbox value. In this way, I can present this value on the next page via cfhttp. That would return:

    border = 1 >
    < b >
    < td align = "center" > < font color = 'blue' size = 4 > EID < / make >
    < td align = "center" > < font color = 'blue' size = 4 > Date < / make >
    < td align = "center" > < font color = 'blue' size = 4 > picture < / make >
    < td align = "center" > < font color = 'blue' size = 4 > picture < / make >
    < td align = "center" > < font color = 'blue' size = 4 > picture < / make >
    < b >
    < td > < b > < /b > 61073876
    < td > < b > 28/08/06 < /b > < br > < b > < /b > 02:13:33
    < td >
    < img src = "" / image_cache/61073876.jpeg ' height width 200 = 200 = > "
    < td >
    < img src = "" / image_cache/61073876_F2.gif ' height width 200 = 200 = > "
    < td >
    < img src = "" / image_cache/61073876_F7.gif ' height width 200 = 200 = > "
    < /table >

    On this basis, I need to the variable value, CBC three img tags. Then I can insert these values into a local database.

    Help me please, because I'm drowning on this one!

    Thank you all.

    You could loop on the content of the file and then parsing each line using a regular expression to extract your checkbox values and image. This is code that I wrote which gets the last box and a panoply of images based on your example. You may need to adjust the regular expression a bit if your example is not the same as the HTML code that you are monitoring.

Maybe you are looking for

  • Cache, cookies and history are not compensation when I close Firefox, even if they are to do and have been for centuries

    I had recently an update (or upgrade?) for 16 FF. Today (and I believe that the update has been done a day or two before?) my cache, cookies and history are not compensation when I close FF. In addition, some links may not work. No links to full web

  • I can put my auto-Delete (DRM) podcast

    Hi all I have a very complex situation of rights with a number of performers and musical works that they do, on my podcast. It would help a lot if I could put the podcast delete itself at a given date and not only it would come off the coast of the i

  • HP Jet 7 loading screen

    I just bought a HP Jet 7 and plugged the usb charger. Apart from an original pictogram on the screen there is no way of knowing if his load and I can not get no sense from Microsoft or HP. My other Tablet has a led that lights up in red when charging

  • power supply subbly

    Hello I have a HP 6000 Pro SFF PDC small form factor with a unit power of 320 watts subbly. Available IIs a 550 Watt subbly unit or more? Or what can I do to change this PC for a good computer player? Thanks a lot for your answers Simone

  • Pin assignment connector D - SUB 15 pin on CompactDAQ chassis

    Hi all I want to use a 9172 CompactDAQ with a Tablet for the measurement of flight with a glider plane, where several ADXL335 disk accelerations are recorded. They need a 5V supply, which should be available from the connector 15-pin D - SUB from the