Rules of procedure and decision reports

Similar Questions

• Call stored procedures and using its output parameters in a report

  Hello
  
  I have a procedure defined in a package on the database. This procedure returns a number of output parameters. How to call this procedure and use the output parameters in my report?
  
  Thank you, Mark

  Depends on the level at which the procedure should be called. If its at the State level, call the form in the trigger-REPORT-BEFORE (or AFTER-PARAMFORM) and store the off-values space reserved columns. These you can use anywhere in your report.

• B & w datatype Differnce report in a procedure and set in the array.

  B & w datatype Differnce report in a procedure and set in the array.
  
  For example:
  
  creating the table:
  create table emp (emp_name varchar2 (100));
  
  each procedure
  
  Create procedure emp_call
  is
  emp_value varchar2 (100);
  BEGIN
  ---
  --
  END;
  
  What is the difference b/w emp_name and emp_value?
  
  one can tell me the difference?

  emp_name is the name of the column of emp table.

  emp_value is a variable in the pl/sql block.

• hr_assignment_api.update_emp_asg_criteria - contact your system administrator citing the procedure and step 40.

  Hi all

  I looked online and found this question popping up but without a clear solution.

  I have reduced API hr_assignment_api.update_emp_asg_criteria to a minimum and still can't seem to update my existing assignment. I use all the current values on the assignment so I know that all values are valid and configuration. Also, I checked and my people flexfield group is enabled and allowing the dynamic insertion. I also ran:

  INSERT INTO fnd_sessions (session_id, effective_date)

  Select ('sessionid'), SYSDATE USERENV

  of the double

  If USERENV('sessionid') not in (select SESSION_ID from fnd_sessions);

  Any help would be greatly appreciated!

  I get the error:

  Error report-

  ORA-20001: System error: procedure in step 40

  Cause: The procedure created a mistake in step 40.

  Action: Contact your system administrator citing the procedure and step 40.

  ORA-06512: at "APPS.HR_ASSIGNMENT_API", line 17385

  ORA-06512: at "APPS.HR_ASSIGNMENT_API", line 15701

  ORA-06512: at "APPS.HR_ASSIGNMENT_API", line 15486

  ORA-06512: at line 26 level

  And here is my code:

  DECLARE

  ln_special_ceiling_step_id PER_ALL_ASSIGNMENTS_F.SPECIAL_CEILING_STEP_ID%TYPE;

  lc_group_name VARCHAR2 (30);

  ld_effective_start_date PER_ALL_ASSIGNMENTS_F.EFFECTIVE_START_DATE%TYPE;

  ld_effective_end_date PER_ALL_ASSIGNMENTS_F.EFFECTIVE_END_DATE%TYPE;

  lb_org_now_no_manager_warning BOOLEAN;

  lb_other_manager_warning BOOLEAN;

  lb_spp_delete_warning BOOLEAN;

  lc_entries_changed_warning VARCHAR2 (30);

  lb_tax_district_changed_warn BOOLEAN;

  -Select * from per_all_assignments_f where assignment_id = 18525;

  ln_ORGANIZATION_ID PER_ALL_POSITIONS.ORGANIZATION_ID%TYPE: = 612;

  ln_LOCATION_ID PER_ALL_POSITIONS. LOCATION_ID % TYPE: = 161;

  ln_job_id PER_ALL_POSITIONS. JOB_ID % TYPE: = 76;

  ln_grade_id HR_ALL_POSITIONS_F.entry_grade_id%TYPE: = 84;

  ln_assignment_id PER_ALL_ASSIGNMENTS_F.ASSIGNMENT_ID%TYPE: = 18525;

  ln_person_id NUMBER: = 23729;

  ln_object_number NUMBER: = 5;

  ln_people_group_id NUMBER: = 2410;

  BEGIN

  () hr_assignment_api.update_emp_asg_criteria

  p_effective_date = > trunc (sysdate),.

  p_datetrack_update_mode = > "CORRECTION."

  p_assignment_id = > ln_assignment_id,

  p_location_id = > ln_LOCATION_ID,

  p_grade_id = > ln_grade_id,

  p_job_id = > ln_JOB_ID,

  p_organization_id = > ln_ORGANIZATION_ID,

  p_people_group_id = > ln_people_group_id,

  p_object_version_number = > ln_object_number,

  p_special_ceiling_step_id = > ln_special_ceiling_step_id,

  p_group_name = > lc_group_name,

  p_effective_start_date = > ld_effective_start_date,

  p_effective_end_date = > ld_effective_end_date,

  p_org_now_no_manager_warning = > lb_org_now_no_manager_warning,

  p_other_manager_warning = > lb_other_manager_warning,

  p_spp_delete_warning = > lb_spp_delete_warning,

  p_entries_changed_warning = > lc_entries_changed_warning,

  p_tax_district_changed_warning = > lb_tax_district_changed_warn

  );

  END;

  It turns out that all of my trouble was because of NLS parameters in SQL Developer. Tools > settings > database > NLS. Now, I chose to ignore the settings NLS and things work much better.

• How can I automatically run a stored procedure when a report is called?

  I've created a classic report on a table (without screen). When I go to this report, I would like to the stored procedure that deletes and inserts information about the table that is based on the report has been started automatically. Where and how can I do to put the call to the stored procedure that the report displays the data once the report is called?

  Thank you!

  Mark1970 wrote:

  I've created a classic report on a table (without screen). When I go to this report, I would like to the stored procedure that deletes and inserts information about the table that is based on the report has been started automatically. Where and how can I do to put the call to the stored procedure that the report displays the data once the report is called?

  Create a page of PL/SQL process by calling the procedure with a Point process On Load - front of regions.

  The report is based on a global temporary table?

• Call a procedure and a function over a db link

  I feel a few errors with the following and would be very happy in the view of some experts here.

  My use case is to insert records into a table via a database link. Inserted records will be interviewed for a same table in the local data dictionary. Everything works, but sometimes, I get a unique constraint violation if I'm trying to insert a duplicate record, so I wrote a simple function to check for the scenario. My problem is that I can run my procedure using the link to the db and I can run my function using the db link, but I can't use the two together without errors.

  My test scenario uses only the standard emp table:

  create or replace procedure test_insert(p_instance varchar2)
  IS
  l_sql varchar2(4000);
  begin
      l_sql := 'insert into EMP@'||p_instance||' (EMPNO, ENAME, JOB, MGR, SAL, DEPTNO) (Select EMPNO, ENAME, JOB, MGR, SAL, DEPTNO from EMP)';
  execute immediate l_sql;
  END;
  
  

  BEGIN
  test_insert('myLink');
  END;
  
  

  It works very well and the insert occurs without any problem.

  If I run the same process a second time, I get:

  00001 00000 - "forced single (s.%s) violated" which is what I've been waiting for EMPNO has a unique constraint. So far so good.

  Now, I create a function to check if the record exists:

  create or replace function record_exists(p_empno IN NUMBER, p_instance IN varchar2) return number
  IS
  l_sql varchar2(4000);
  l_count number;
  BEGIN
  l_sql := 'select count(*) from EMP@'||p_instance||' where empno = '||p_empno;
  execute immediate l_sql into l_count;
  IF
  l_count > 0
  THEN return 1;
  ELSE
  return 0;
  END IF;
  END;
  
  

  I test this situation as follows:

  select record_exists(8020, 'myLink') from dual;
  
  

  RECORD_EXISTS(8020,'myLink')

  -------------------------------------------

  1

  That works well, so now I'll add this feature to my procedure:

  create or replace procedure test_insert(p_instance varchar2)
  IS
  l_sql varchar2(4000);
  begin
      l_sql := 'insert into EMP@'||p_instance||' (EMPNO, ENAME, JOB, MGR, SAL, DEPTNO) (Select EMPNO, ENAME, JOB, MGR, SAL, DEPTNO from EMP WHERE record_exists( EMPNO, '''||p_instance||''') = 0)';
  execute immediate l_sql;
  END;
  
  

  I test this situation as follows:

  BEGIN
  test_insert('myLink');
  END;
  
  

  As a result:

  Error report:
  ORA-02069: global_names parameter must be set to TRUE for this operation
  ORA-06512: at "FUSION.TEST_INSERT", line 6
  ORA-06512: at line 2
  02069. 00000 -  "global_names parameter must be set to TRUE for this operation"
  *Cause:    A remote mapping of the statement is required but cannot be achieved
             because global_names should be set to TRUE for it to be achieved
  *Action:   Issue alter session set global_names = true if possible
  
  

  I don't know why I'm getting this. The function works, the works of the procedure, but when I combine I get an error. If I set the global setting to true names and then run again I get:

  
  02085. 00000 -  "database link %s connects to %s"
  *Cause:    a database link connected to a database with a different name.
             The connection is rejected.
  *Action:   create a database link with the same name as the database it
             connects to, or set global_names=false.
  
  

  All opinions are appreciated. I do not understand why I can run the procedure and function of each separately on the db connection, but they don't work together.

  Thank you

  John

  The procedure depends on what how would you define failure and it should mean - error to the caller, sign and continue, just continue. Constraints are created to ensure if it receives no invalid data in a table. Generally, they provide the most effective mechanism for the verification of the invalid data and return useful exceptions that can deal with the appellant. You also double the workload of the checking uniqueness by adding your own control.

  In general I would say use Exceptions, they are your friend

• How to export and import reports and presentations?

  Hi guys,.
  
  How to export and import reports and presentations of 7.2 Analyzer 11.1.1 Web Analytics.
  Can you please tell me the procedure.
  
  Thank you

  Hello

  As I mentioned earlier, you can export documents and presentations on the computer and mapped drives.
  -Exported documents take ARD extension & presentations take APT extension.

  To export the current document, select file, then export current Document. In the Save dialog box, indicate your location of local/network drive to which the file should be saved and click OK.

  I believe-7.2 Analyzer also has the wizard to allow you to export documents. & Presentations.

  -Alexia

• Oracle stored procedure in the reports

  Hello
  
  How can I call oracle stored procedure in Oracle reports. The procedure takes a variable of type object and as a parameter out.
  
  Thank you
  Groult

  Create a package in your report and set a variable of this type of object in the package body.
  Write a procedure in your package that checks if your variable is empty, and if this is the case, call your db-procedure to fill the variable.
  For each value that you want to display in your report, create a functioncolumn that calls the formlery procedure written in your package and then returns the requested of your object type value. In the available build ontop the columns function created fields.

• photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  can I do or just wait for someone to fix it

  photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  is there anything I can do or just wait for someone to fix it?

  If you want any help here, you'll have to tell us what the error message.

  Which report you errors to?

• I just installed Firefox 6, and the report does more - the same problem you had with Firefox 5. What is going on?

  You prompted me to install Firefox 6 tonight, because it addresses serious security/stability problems, but when I did this, the report icon has disappeared from the address bar. Reinstall the latest version of the report was corrected not it.
  It's the same thing with Firefox 5 a few months ago, and it has taken report per week to develop a new compatible version.
  Why this happened again? You not check this before launching new versions? Or, why at all not least we warn in advance that some programs will not work for X days? I prefer to be without the latest Firefox for a week or two, and no report - not least because that my Bank, I have to use the report.

  Please advise as soon as POSSIBLE.

  Malcolm Oliver

  This is the link in the message that Trusteer sent me today. I have updated and works great so far.

  Please contact the Support technique Trusteer.

  We are pleased to inform you that a version of the report that supports Firefox 6 has
  been released and is now available for download in the following link:
  http://download.Trusteer.com/NkuiAcruiKc/RapportSetup.exe

  Please be sure to restart your computer once the installation process
  completed.

  Please note: this version of the report is currently a beta version. We'd
  appreciate any comments you may have about this version.

  If the report indicates that the version of the report that you are trying to install is older
  than the version already installed, follow these steps:
  1. choose uninstall report
  2. When prompted, select 'delete all user settings '. Please, assisted by the
  suite of image: http://consumers.trusteer.com/files/images/uninstall.jpg
  3 reinstall the report from the link above.

• I downloaded Itunes 12.3.3 and now I tunes does not recognize my Ipad or Iphone. I went through all the procedures and just uninstall and reinstall. Please fix 12.3.3.Thanks.

  I downloaded Itunes 12.3.3 and now I tunes does not recognize my Ipad or Iphone. I went through all the procedures and just uninstall and reinstall. Please fix 12.3.3.Thanks.

  iTunes: fix iPhone or iPod not detected Windows 10

• A way to find my previous questions and problem reports?

  Is it possible on this forum to find my previous questions and problem reports? Since viewing a question earlier today, I found the greater PART of the answer and would like to add that I found the question, without waiting for someone else to answer. I can't remember the title I gave to the previous question, or I would use this title in the search for it.

  Information troubleshooting below is most relevant to a previous problem that this question.

  Contributions my link on main page of the forum should display a list of all your job offers.

  See the search in this forum for your username under "posed by".

• VB 6.0 and Crystal Report 8.5

  one of our private applications was developed by VB 6.0 and Crystal Report 8.5. Let me these EOS or produced without license

  Try asking in the forums of Visual Basic:
  http://social.msdn.Microsoft.com/forums/vstudio/en-us/home?Forum=vbgeneral

  Crystal Reports is not a product of Ms. You need to ask them.

• Solutions and problem reports

  I can't update

  Update what? Problem reports and Solutions provides a centralized location for managing the resources of the maintenance of your computer like Windows Update, Antivirus and error report.

  If you have problems with Windows Update, try the following:

  How to reset the Windows Update components ? Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Get the error message "send and receive reported an error (0x800CCC92): your e-mail server rejected your login. '. Check your username and password in your account properties.

  Get the error message "send and receive reported an error (0x800CCC92): your e-mail server rejected your login. '.  Check your username and password in your account properties.
  I'm using Outlook 2002 on the XP Pro operating system.

  It lasts for almost a year, but I managed to work around the issue since it was started using a different outgoing SMTP user name and the password.  (More settings, outgoing server tab, log in using...)  Now it has stopped working.

  There are four machines at this place and all suffer from the same problem.  I use a LinkSys RVS4000 router.  The previous Linksys router has also had the same problem so I replaced, thinking he can correct the problem, he didn't.
  Troubleshooting:
  a. I am able to recreate the account on another machine to a different place and it works.
  b. I can take an account of my machine, create in this place and it will not work.
  c. accounts deleted and created a new, did not
  d. has replaced the router to the place with a new Linksys router
  e. contacted support for ISP, (Time Warner), they accuse the hosting company
  d. contacted support for hosting of the company (HostCentric) they blame the ISP
  c. confirmed username and passwords are correct.
  e. There are 4 machines in this place with different addresses.  All started having this problem/error the same day within hours
  f. may receive emails cannot be sent.

  http://expwinproblems.blogspot.com/2010/11/error-messages-in-Outlook-when-send-or.html