Runtime environment java error

Hello

I create a virtual keyboard for English and Tamil with backend process.
I created virtual keyboard using custom component tat.

I used this customcomponent (vkey.mxml) in main.mxml file

I create the build.xml ant file.

that day, he successfully built.

If I change any line or something I create once more.

that day, I got on hs_err_pid5032.log containing

A fatal error has been detected by the Java runtime environment.

32756 byte for chunkpool jav.lang.outofMemoryError:requested: allocated. out of swap space?

This is the error
How do I rectify this error.
If I build one more time the flashbuilder 4 and the eclipse plugin application terminated.


concerning

Athi

Oh OK! It seems to be a fairly small project only.

The - Xmx worked? Your problem is solved?

Baker V

Tags: Flash Builder

Similar Questions

  • Java Runtime Environment Java Control Panel settings

    Hello

    I am trying to find a description and parameters for the user and system parameters in Runtime environments in the Java Control Panel.

    I have read the information from the control panel:

    http://docs.Oracle.com/javase/7/docs/TechNotes/guides/deployment/deployment-guide/JCP.html

    But it specifies precisely what are the user and tabs system allowing to configure.

    This may be insignificant to most, but I can not find the correct answer.

    Thanks in advance for your help.

    On the settings for the user. The other is for the system as a whole. I know that's not all that much clearer! The settings in the control panel are attached to configuration files. Here are some details.

    http://docs.Oracle.com/javase/7/docs/TechNotes/guides/deployment/deployment-guide/properties.html#overview

    The deployment.properties file is used to store and retrieve deployment configuration properties in the Java Control Panel. They are also used to customize the behavior of execution for Java plug-in and Java Web Start.

    There is always a user-level deployment.properties file. Its location, which is not configurable, is described below. It can also be a (optional) to address system-level deployment.properties file. If it exists, its location is determined by an administrator via the deployment.config file as shown below.

    Hope this helps,
    Roger

  • APEX 3.2 error upgrading of Runtime Environment

    After successfully after improved our development of 3.1.2 to 3.2 environment did us a upgrade of our production environment where only a runtime environment is installed.
    The statement was made following the documentation for installation/upgrade of the APEX
    SELECT * 
      FROM apex_030200.wwv_flow_upgrade_progress
     WHERE upgrade_error IS NOT NULL
    ;
    The result was the following:
    UPGRADE_ID UPGRADE_ UPGRADE_SEQUENCE UPGRADE ACTION UPGRADE_ERROR                                                         UPGRADE_COMMAND
    ---------- -------- ---------------- -------------- --------------------------------------------------------------------- ------------------------------------------------------------------
             1 19.03.09              704 error on grant ORA-04042: procedure,function,package, or package body does not exist grant execute on APEX_030200.APEX_MIGRATION_PROJECTS to public
             1 19.03.09              705 error on grant ORA-04042: procedure,function,package, or package body does not exist grant execute on APEX_030200.APEX_MIGRATION_ACC_PROJECTS to public
             1 19.03.09              706 error on grant ORA-04042: procedure,function,package, or package body does not exist grant execute on APEX_030200.APEX_MIGRATION_ACC_TABLES to public
             1 19.03.09              707 error on grant ORA-04042: procedure,function,package, or package body does not exist grant execute on APEX_030200.APEX_MIGRATION_ACC_FORMS to public
             1 19.03.09              708 error on grant ORA-04042: procedure,function,package, or package body does not exist grant execute on APEX_030200.APEX_MIGRATION_ACC_RPTS to public
             1 19.03.09              709 error on grant ORA-04042: procedure,function,package, or package body does not exist grant execute on APEX_030200.APEX_MIGRATION_ACC_QUERIES to public
             1 19.03.09              710 error on grant ORA-04042: procedure,function,package, or package body does not exist grant execute on APEX_030200.APEX_MIGRATION_REV_FORMS to public
             1 19.03.09              711 error on grant ORA-04042: procedure,function,package, or package body does not exist grant execute on APEX_030200.APEX_MIGRATION_REV_RPTS to public
             1 19.03.09              712 error on grant ORA-04042: procedure,function,package, or package body does not exist grant execute on APEX_030200.APEX_MIGRATION_REV_QUERIES to public
             1 19.03.09              713 error on grant ORA-04042: procedure,function,package, or package body does not exist grant execute on APEX_030200.APEX_MIGRATION_REV_TABLES to public
    Since there was no error in the table when we went to our development environment, I have reviewed the install scripts.
    The first glance the ORA is a bit confusing because the objects are procedures, functions, packages or package bodies but views.
    These views are created only during the installation/upgrade a development environment.

    After you have selected the dba_registry
    SELECT version
         , status 
      FROM DBA_REGISTRY
     WHERE comp_id = 'APEX'
    ;
    the view of the dictionary said a valid installation of APEX. So I guess it's just a small bug with the runtime environment upgrade that could be ignored.

    Anyone have the same experiences during the upgrade of its execution environment?

    Big names

    Andreas

    Hi Andreas,

    Thank you for bringing This problem to our attention. As you said, this is a minor bug with an upgrade of the runtime environment and errors can be ignored.

    Mistakes refer to views that are not created during the installation/upgrade a runtime environment. The point of view of the Migration of applications are not part of a runtime installation, and that's why these errors should not be in the APEX_030200.wwv_flow_upgrade_progress table. Bug 8351256 has been noted to follow up this issue.

    Kind regards
    Hilary

  • Error initializing Java Runtime Environment.  You may need to reinstall Flash.

    ... It's really annoying.

    I work with adobe cs5. Recently, it started to not work. I have to restart again and again so that it can compile a swf properly. I'm trying so cs5.5. I get this error "error initializing Java Runtime Environment.  You may need to reinstall Flash. »

    So im like OK... This is useful...

    -Reinstall flash-

    "Error initializing Java Runtime Environment.  You may need to reinstall Flash. »

    ...

    -Reinstall java-

    -Reinstall flash-

    -Reinstall adobe flash cs5.5-

    "Error initializing Java Runtime Environment.  You may need to reinstall Flash. »

    ...

    -google-

    If I came across this post. Follow it exactly.

    "Error initializing Java Runtime Environment.  You may need to reinstall Flash. »

    ...

    I have change the thing in the file to Xmx1024M

    "Error initializing Java Runtime Environment.  You may need to reinstall Flash. »

    ...

    Just on the forums.

    What should I do now?

    I found a solution that works for me.

    Just delete the file jvm.ini under the location of the temporary folder. In windows, it would be under path.

    C:\Users\USERNAME\AppData\Local\Adobe\FLASH_VERSION\en_US\Configuration\ActionScript 3.0

    For example. C:\Users\admin\AppData\Local\Adobe\Flash CS6\en_US\Configuration\ActionScript 3.0

    As soon as you start the Flash, a defult jvm.ini will be created automatically, in this place and your flash works fine.

    Acutally the error comes because of the jvm.ini of corroupt file (cause too great values > 256 error displayed.) For example. Xmx1024m) that is created in setting up temporary forlders automatically during the Installation of Flash.

    Whenever Flash begins his search the file jvm.ini and let the maximum memory of initalized at FMV.

  • How can I remove J2SE Runtime Environment 5.0 update 11. Application of transformation error when you use Add/Remove programs

    Cannot remove J2SE Runtime Environment 5.0 update 11 or Java or Java 2 Runtime Environment SEv1.4.2_6.

    Add/Remove Programs DOES NOT WORK.  Message received when you try to remove programs is, "error application of transformations".

    Java (TM) 6 Update 21 is installed on my computer.

    Please let know us the step by step procedure to remove the old Java programs.  Thank you.

    E-mail address is removed from the privacy *.

    use revo uninstaller

  • Sun Java Runtime Environment 6 Update 18

    Sun Java Runtime Environment 6 Update 18

    Sun Java Runtime Environment 6 Update 18
    JRE 6 Update 18
    The JRE is required to run applets and Java and JavaFX applications. This special release provides key fixes a few

    http://Java.Sun.com/javase/downloads/index.jsp

    Wilders Security Admin


    This version of the feature does contain all new fixes for security vulnerabilities to its previous version, Java SE 6 Update 17. Users of Java SE 6 Update 17 are the latest security patches and do not need to upgrade to this version is current on security patches. [emphasis]

    Source: http://java.sun.com/javase/6/webnotes/6u18.html ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Java error when agent deployment...

    Hi all

    I try to install oracle 11.1 agent. Already have the configuration (version 11 as well) WHO and all. Agent deployment. I followed the guide... but during the agent installation using the answer file... I get error related to java? I have java installed on the server where my agent is deployed... any help would be appreciated

    http://download.Oracle.com/docs/CD/E11857_01/install.111/e16847/install_agent_usng_rsp.htm#CEGGACJE
    $ ./runInstaller -silent -responseFile /oracle/OEMAGENT/software/hpunix/response/additional_agent.rsp
    Starting Oracle Universal Installer...
    
    Checking Temp space: must be greater than 150 MB.   Actual 951 MB    Passed
    Checking swap space: must be greater than 150 MB.   Actual 49140 MB    Passed
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-05-19_03-12-02PM. Please wait ...$ Error: could not find libjava.so
    Error: could not find Java 2 Runtime Environment.
    
    $
    $
    $
    $ whereis java
    java: /opt/java1.5/bin/java /opt/java6/bin/java /opt/java1.4/bin/java /opt/java1.4/man/man1/java.1
    $
    $
    $ env|grep java
    PATH=/opt/java6/bin:/usr/bin:/usr/ccs/bin:/usr/contrib/bin:/usr/contrib/Q4/bin:/opt/perl/bin:/opt/gvsd/bin:/opt/ipf/bin:/opt/nettladm/bin:/opt/fcms/bin:/opt/wbem/bin:/opt/wbem/sbin:/opt/sas/bin:/opt/graphics/common/bin:/opt/atok/bin:/usr/bin/X11:/usr/contrib/bin/X11:/opt/sec_mgmt/bastille/bin:/opt/caliper/bin:/opt/drd/bin:/opt/dsau/bin:/opt/dsau/sbin:/opt/resmon/bin:/opt/gnome/bin:/opt/perf/bin:/opt/propplus/bin:/usr/contrib/kwdb/bin:/opt/perl_32/bin:/opt/perl_64/bin:/opt/prm/bin:/opt/sfm/bin:/opt/swm/bin:/opt/sec_mgmt/spc/bin:/opt/ssh/bin:/opt/swa/bin:/opt/hpsmh/bin:/opt/langtools/bin:/opt/wlm/bin:/opt/gwlm/bin:/opt/sentinel/bin:/opt/hpnp//bin:/opt/hpnpl//bin:/opt/ignite/bin
    JAVA_HOME=/opt/java6
    $
    $ which java
    /opt/java6/bin/java
    $

    Oracle Universal Installer is normally using its own JRE to its own media. Verify that your Oracle zip files have been correctly uploaded: you can do this with cksum (see page that displays for each download zip file cksum).

  • Tables in the schema APEX_050000 not granted to the PUBLIC in the runtime environment

    Hi all

    I compare development and Runtime environment APEX_050000 property schema and subsidies.  I have no error in two newspaper plants

    Select count (*) in the dba_tab_privs where owner = 'APEX_050000' and recipient = "PUBLIC";

    In development, count = 270, at runtime, count = 109

    Select count (*) in the dba_synonyms where owner = 'PUBLIC' and table_owner = 'APEX_050000. '

    To = 293, runtime development County, County = 270

    Is this a bug?  I'm running on DB 11.2.0.4

    Any script available in APEX I can run to grant so many pictures?

    Thank you, Dorothy

    Dorothy salvation,

    a single runtime system has intentionally less public synonyms and subsidies, because we do not install all the packages that are needed for a dev environment. But see wwv_flow.accept null off the coast of the element leader through the runtime environment to find the declaration of re - create these synonyms/grants.

    Concerning

    Patrick

  • Java error

    When I open the app dps generator it is said: "To view the content of this web, you must install the Java Runtime Environment.", and even after the download of java and flash and restarted my computer, I always get this message. What should I do?

    Read this thread and install this hotfix if you are running Yosemite.

    Install Java on Yosemite

  • Management of an APEX with walk-APIs - it APEX runtime environment?

    People,

    APEX Version: 4.2.1
    Database EE 11 GR 2
    Listener: EPG

    TLDR: Go at the end of the question for this thread in bold.

    I work in an environment where we have maintained by Oracle Forms applications and Oracle APEX on a database only internal production data. We want to take a redacted together these data (PII or personal Identifiable Information removal) and some applications of the APEX and put them on a separate external server for public consumption. The internal production environment is running APEX with the runtime and development environments. The external server runs APEX with just the execution with the query, only the applications environment. While two of the external applications are public applications without authentication (both work very well), there is an application that will have a relatively small number of users who authenticate with the application to access more detailed information than the general public. Still no PII or something like that, a little more information. Users are users of workspace APEX. The three applications are in the same workspace.

    I have to assume that I'm not the only person with the above configuration, but I had a moment difficult to work right. Although the documentation does not have the API, it is not always clear which API you would use and why.

    For example, in the internal production environment when a user connects to the authenticated application, they get access to the application (if they are in the right group) or they get an error page indicating that they have no access to the application. In the external runtime application that they will always have a ' ORA-06550: line 4, column 55: PLS-00201: identifier ' WWV_FLOW_F4000_PLUGINS.» ' INTERNAL_4155_SESSION_SENTRY' must be declared ORA-06550: line 4, column 1: PL/SQL: statement ignored ' error, which "sort of" makes sense because the application referenced (4155) is part of the installation of development and is not included as part of the runtime install only (either by the way, this seems like a bit of an oversight on the part of the APEX team). It is pretty obvious that the export and import of the workspace (and its users) 'something' got zero and some type of password reset is requested. Of course, end-user password reset request is not included in a single installation of runtime...

    So, off to the API to see if I can "reset" on the single runtime installation external users so that they do not have to reset their passwords when first connecting. Wow... Lots and lots of API. Understand that you must set the security with the APEX_UTIL group id. SET_SECURITY_GROUP_ID API takes some time. After much wandering around, I settled on the apex_util API and the WWV_FLOW_USERS view as a good place to study...

    However, when we query the view WWV_FLOW_USERS on each side, all of the columns "expected" that one would expect because of this behavior are identical between the installation of development / internal enforcement and the only external runtime installation. Things like CHANGE_PASSWORD_ON_FIRST_USE and FIRST_PASSWORD_USE_OCCURRED are identical (and btw, not the values that you expect them to be... FIRST_PASSWORD_USE_OCCURRED is N for all users except the user ADMIN). The only values that differ between the two environments are as CREATED_BY, CREATION_DATE, LAST_UPDATED_DATE, and LAST_UPDATED_BY columns.

    Things that work just great:

    < li > the installation itself! Very easy to move backward between each environment (runtime only or runtime and development).
    < Li > integration with SQL/Developer is fantastic. It is very cool to be able to right-click on an application in the internal environment and deploy it to the unique runtime environment. Ideally, it would be nice to be able to move workspaces APEX in the same way.

    Things that do not seem to be large:

    < Li > when that documentation tells you what each API, it doesn't tell you why you want to use it, or what you would use it for. Having a section "useful use case" in the documentation would be great. Yes, there is the example of code (which of course does not mention that you need to set the id of Group of security for most of them to work), but the code example is not really tell you why and what each of the attributes you can set with her (for the API set for example) will actually... For example the documentation does not really that many fields are not yet used, and even if the values are the exact opposite of what you would think they would be.

    So, my immediate question:

    What API will allow me to have users exported with a workspace to use applications that are authenticated in a single installation of runtime?

    And my follow-up question (s):

    You can actually use the API defined to manage a runtime environment and is at - it a good resource that explains the how and why rather than just the choice of the API.

    Well, after a lot of trying things, I finally had things to work.

    It seems that export and import a workspace "expires" users to your workspace. Despite the fact that, in the development environment / the ACCOUNT_EXPIRY (which is a date) has a whole bunch of different values and seems to work perfectly, when you import a workspace that the ACCOUNT_EXPIRY column is ready on the date you did import previous internal enforcement. For some reason, this is an indication that your account has expired at the time when you look at the WWV_FLOW_USERS table. Not one of the columns expected, but on the contrary this date column...

    So let's take a look at the [url http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35127/apex_util.htm#autoId126]Unexpire account of the workspace of the documentation procedure:]

    UNEXPIRE_WORKSPACE_ACCOUNT Procedure
    
    Unexpires developer and workspace administrator accounts and the associated passwords, enabling the developer or administrator to log in to a workspace.
    
    Syntax
    
    APEX_UTIL.UNEXPIRE_WORKSPACE_ACCOUNT (
        p_user_name IN VARCHAR2);
    
    Parameters
    
    Table 21-107 describes the parameters available in the UNEXPIRE_WORKSPACE_ACCOUNT procedure.
    
    Table 21-107 UNEXPIRE_WORKSPACE_ACCOUNT Parameters
    Parameter           Description
    
    p_user_name  The user name of the user account
    
    Example
    
    The following example shows how to use the UNEXPIRE_WORKSPACE_ACCOUNT procedure. Use this procedure to renew (unexpire) an Application Express workspace administrator account in the current workspace. This action specifically renews the account for use by developers or administrators to login to a workspace and may also renew the account for its use by end users to authenticate to developed applications.
    
    This procedure must be run by a user having administration privileges in the current workspace.
    
    BEGIN
        FOR c1 IN (select user_name from wwv_flow_users) loop
            APEX_UTIL.UNEXPIRE_WORKSPACE_ACCOUNT(p_user_name => c1.user_name);
            htp.p('Workspace Account:'||c1.user_name||' is now valid.');
        END LOOP;
    END;   
    
    See Also:
    "EXPIRE_WORKSPACE_ACCOUNT Procedure" and "WORKSPACE_ACCOUNT_DAYS_LEFT Function"
    

    It's very nice and all, but there are some things missing in the example above:

    (1) you must call the procedure of apex_util.set_security_group_id with the ID of the workspace you want to unexpire accounts.
    (2) you will need to issue a COMMIT for steps to engage the unexpire.

    Question: How are you supposed to know you need to do the above two steps?

    Take a look at what the API documentation has for the description of the SET_SECURITY_GROUP_ID procedure:

    SET_SECURITY_GROUP_ID Procedure
    Use this procedure with apex_util.find_security_group_id to ease the use of the mail package in batch mode. This procedure is especially useful when a schema is associated with more than one workspace. For example, you might want to create a procedure that is run by a nightly job to email all outstanding tasks.
    

    Note that there is no mention that you will need to call the SET_SECURITY_GROUP_ID procedure for almost all other API calls in the APEX_UTIL package (or at least many of them)...

  • Application upgrade to sqlplus in the "Runtime environment".

    Hello

    We have a production server to top "Runtime environment" installed 4.0.2. It wasn't a problem to import our application for the first time in SQLplus by running the sql export script. But when we try to update already installed the application in SQLplus with a new version, we get an error:

    SQL > @c:\f101.sql;
    REQUEST 101 - test.xxx
    Set credentials...
    Check the compatibility...
    Last API extended: 20100513
    Your current Version: 20100513
    This import is compatible with the version: 20100513
    COMPATIBLE (you should be able to perform this import without problem).
    Set Application ID...
    Start
    *
    ERROR on line 1:
    ORA-20001: 101 Application has not been deleted. Import will not be attempted.
    ORA-06512: at "APEX_040000.WWV_FLOW_API", line 327
    ORA-06512: at line 4 level

    How we solve this problem?

    NOTE:
    (1) We MUST import the application with the same app ID,
    (2) we cannot use SQL Developer or Web management interface (this is installation of Runtime Environment) - the SQLplus is one option

    Many thanks in advance,
    Alexander

    OK, nevermind, I think I know what the problem is. I tried it in the sql workshop and that's why it worked for me.

    To do it (with the name of your workspace):

    DECLARE
    l_ws NUMBER: = apex_util.find_security_group_id('NAMEOFYOURWORKSPACE');
    BEGIN
    wwv_flow_api.set_security_group_id (l_ws);
    wwv_flow_api.remove_flow (101);
    END;

  • I play runescape and lately to get java error on my desktop icons very much, they are labeled hs_err_pid followed 3 different numbers, help please

    I play runescape and lately to get java error on my desktop icons very much, they are labeled hs_err_pid followed 3 different numbers, help please

    Hi madsman,

    Thank you for using Microsoft Windows forum

    For better support please give us the exact error code.

    This could well be a virus problem. If your step would be to run a full scan of PC online using the following link:
    http://OneCare.live.com/site/en-us/Center/whatsnew.htm
    Then, go to your Control Panel and open "Programs and features" and tell us what version of the Java Application you have.

    If you have a Version that is older, then you must remove the older version of "Programs and features" and install the latest version by visiting here: http://www.java.com/en/download/manual.jsp

    It is normally acceptable to load new versions of Java on top of older versions, but in this case we want to start over with a latest full version.

    Scroll down a bit to the "Download Windows Section" and download/install "Windows 7".

    After download/install this newer version. Close all windows and applications that may be running and "restart" your computer.

    Then click the link once more to return to the download page and select the link that reads "Check Java has been installed properly" If the application downloaded/installed correctly then this test will let know you that Java is working properly.

    Your last step would be to run a malware scan using this link:

    Malicious software removal tool: http://www.microsoft.com/security/malwareremove/default.aspx

    Kind regards
    Aziz Nadeem - Microsoft Support

  • Front view without installing runtime environment remote

    Hi all

    I have a question about the LabView software.

    I am currently using LabView 2014 to develop applications that the user can access distance front panels (from the executable applications).

    In view of the concerns of the customers IT department, now I'm looking for a way to provide access to applications without having to install the runtime environment.

    I found some documents about this issue, but there is only a mention of the internet plugins explorer (which is not enough to display the Panel before correcly).

    What is necessary for the execution of the façade remotely within a window of internet explore?

    Best wishes

    Andrei

    Remote façade panels requires both the plugin for the browser you are using and also require the appropriate version of the LabVIEW run-time engine.

    You can have a look at the WebSockets link in my signature - we had a lot of success to create signs at base of remote web for our software using WebSockets. There is a presentation and an example here: https://decibel.ni.com/content/docs/DOC-41778. With the help of my library allows you to create your own UI using html/css/javascript and communicate with a LabVIEW application.

    You should also check out LabSocket - this is a replacement for the outside from facades of WebSockets so it should save you having to create the user interface yourself, because it uses the front panel of your VI.

  • can revo uninstaller slove java error 1722?

    can revo uninstaller slove java error 1722?

    Hi amitkumarxq,

    You did it of any material changes or software on the computer before this problem?

    I suggest you to follow this link and check if the problem persists.

    Error 1722. There is a problem with this Windows Installer package.

    On Revo uninstaller, there's not a lot of information with us.

    Hope the helps of information.
    Please post back and we do know.

  • When I try to use my Microsoft Picture It application I get a "Microsoft Visual C++ Runtime Library" error__no error numbers. Microsoft Visual C++ Runtime Library program: Microsoft Picture It 2002\pip.exe__

    When I try to use my Microsoft Photo ITI application I get an error of "Microsoft Visual C++ Runtime Library"
    no error number. Microsoft Visual C++ Runtime Library program: Microsoft Picture It 2002\pip.exe

    I am using Microsoft Windows XP Home Edition Version 2002
    Service Pack 3

    The program stops.  It seems that I've adjusted started to have this problem after I had upgraded my browser from Internet 8.

    When I try to use my Microsoft Photo ITI application I get an error of "Microsoft Visual C++ Runtime Library"
    no error number. Microsoft Visual C++ Runtime Library program: Microsoft Picture It 2002\pip.exe

    I am using Microsoft Windows XP Home Edition Version 2002
    Service Pack 3

    The program stops.  It seems that I've adjusted started to have this problem after I had upgraded my browser from Internet 8.

    ========================================
    Might be interesting to try to download and install the following scroll:

    Picture It! Publishing 2002:
    Patch for 19299 (PI19299.exe)
    http://tinyurl.com/dfeq28
    or...
    http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=0fb68178-d6bd-41BD-9f00-f44ac7ca9e28
    John Inzer - MS - MVP - digital media experience

Maybe you are looking for