Salesforce integration errors because of country / state
We had tons of errors after what seems like months of research and integration, we got some of them cleared up, but some are still occurring. Basically, errors are saying there is a problem with the State or the country: "there is a problem with this country, even if it may seem correct. Please select a country from the valid list of countries. ': country "(and similar for the State)
What seems to happen is if the State or country is not filled, it will not take Salesforce or if the State does not match or is not filled, it's just-error. I went by pressing several times, the best solution, with which they could come is to add a State in the drop down list of 'International' but this is absolutely not good unless I go manually and set it. I suppose I could put a update rule to update the field if the report is empty and the country is not US. But there must be another way. I can't imagine I'm the only one who has ever had this problem?
Anyone who has already had problems with the integration does not not because of incomplete or incorrect, fields State or country?
Ashley,
We used to have a similar problem - and still do with Zip / Postal codes. You can check the appearance of the Salesforce. In our case of Salesforce, for any lead/contact we have the following field: first & last name, Email and ZIP Code. So, whenever someone gets through the program update CRM without any of those - we get a similar error. In the same way, our phone in Salesforce field requires to be in a specific format. When a contact does not have this specific format is met, it also provides an error.
These two examples are like those you encounter with the State and country: my thought would be there may be requirements of field as well as the validation rules on the fields of your State and country of Salesfroce. I could connect with your SFDC admin and see from there.
Tags: Marketers
Similar Questions
-
PeopleSoft data integrity error (124,85)
Hi all
Today, some users trying to access different components face "data integrity error (124,85). This occurred with different users to different components as well.
When I checked my logs, I found the following.
Version of the PeopleCode program changed by calling the DEPT_ASSOC_UPDATE. Max version was 1, now 32
Data integrity error (124,85)
I checked the support of oracle and other forums as well, they suggested me to run the VERSION of AE. After you run the VERSION of AE, problems have been resolved and the user wasn't more questions.
I was looking for the cause of this problem, but did not have a lot of details on this. MOS Doc ID 611688.1 were not mentioned in any cause as well.
There has not been change code to our PeopleSoft system for more than a month.
If someone of you can help me to understand why this issue of the integrity of the data occurs?
Also CACHE corruption have any part to play in this regard?
Forums. documents or leads to this topic is welcome.
Thanks in advance.
Details of the system
PeopleSoft HRMS 9.1, 8.51.10
Server 2008 R2
While I was working for another client, I faced similar problems (often wrong). I'm not sure it was just a coincidence, I worked on almost 12 different Production systems and seem to face these problem only in PeopleSoft HRMS systems.
Thank you
Vimal
Present several different issues here and I'll provide a few comments help the discussion along. Sorry, but this can be long... you are wading in deep waters.
1. you mention that the AE Version helped and that the symptoms were not seen after that. Which suggests a version can be resolved the corruption. Please do not forget the you run the version of most of the EI of the Version of 611565.1 that we have worked hard to make sure he could be running in enhanced mode without taking the system down.
2. you have indicated that the object that had version conflicts has been the «... the component DEPT_ASSOC_UPDATE...» ", emphasis added. Normally, items are managed in the projects, so I normally start here. Component, files, etc are migrated in the projects, so if you can find a project that has been migrated at the time, the problem started, you might have a corrupted project. The survey should attempt to address first of all 'what has changed?' and then ' who/how did it changed do?
3. prior to go further, be sure that when you have version corruptions in a database, e.g. PROD, you run the AE Version on ANY database that feed on projects in this database, for example TCT, DEV, etc. A corrupt database can pass a corrupted to an other database - as much as we try to prevent this.
4. the versions are a balancing between the PSVERSION and the PS Act * Definition and others, but let's keep things simple for now. In the case of a project, the PSVERSION. PJM line must match the version MAX of the PSPROJECTDEFN table. If you are interested, crack open the latest Version of AE and you will see an InitArrays function that describes the relationship between the people. It will be a "secret decoder ring" while you're working through this.
5. If you do some creative SQL, you can identify the OPRID and last modified date/time for the line in the PSPROJECTDEFN table max, and sometimes that will point to a problem. Sometimes, if you see errors of version from some time, you can map it to a migration that occurred in and around that time. Yet once, spend time with a query tool and look at this chart. "Corrupt projects are often the result of the sessions App Designer who have been 'put to sleep' say a weekend ' and then woke up without login back. Using this method, you can sometimes identify the culprit if that is the problem. (It was in the previous version of the KM, but I took it out when I rewrote the current version).
6. you said that the problem has emerged from a component that is corrupt. If this is the case, I would look at RDM/PSRECDEFN incompatibilities/fingerprints. If you look closely, the RDM is associated with several tables, so I would double check all those.
7. Finally, I can the big white elephant in the room - direct SQL access. Some applications have been known to directly manipulate the content of PeopleTools tables, which is more unfortunately, because that condemn us customers that do. (I saw this code in more SQR). Since the relationship between the various tables of Manager (PS * Definition) and the PSVERSION line isn't exactly trivial, a simple update can break this relationship. (See my comments in the previous footnote.) I OFTEN see this when you import new users in the PSOPRDEFN table, but the symptom does not match you. If you find a table that appears corrupted, you could search by PeopleCode/Source code to see if this object is manipulated directly anywhere. If you find an instance in the provided code, please open an SR and ask that it be repaired. If you find it in custom code... shame on you.
HTH
-
Hi gurus of the Oracle,.
I use the "Query" Salesforce adapter operation. It worked fine last week when I had a service to call SFDC API. But after I added a second invoke for the same query operation, I get this error.
Call service Salesforce adapter error - java.lang.IllegalStateException: encryption algorithm not initialized
Pls check below the doc for source Composite.xml and BPEL.
https://drive.Google.com/file/d/0B8E4JtTUuzitQ1lpUkVxNnV5UGM/edit?USP=sharing
It looks like an access problem, but I am able to call the SFDC API using SOAP UI. Help, please.
The soa stack error - diagnostic.log
--======================
[2014 07-09 T 17: 47:04.272 - 07:00] [soa_server22] [NOTIFICATION] [] [oracle.soa.adapter.cloud] [tid: orabpel.invoke.pool - 4.thread - 9] [username: GOPAL_TARITLA] [ecid: c17d2d5e5766b07e:-65660a9c:14711d970c3:-8000-00000000000d3eba, 1:33309] [APP: soa-infra] [composite_instance_id: 50029] [composite_name: Dell_Zuora_to_Oracle_Invoice_Iface! 1.4] [Component_name: SFDC] resource found by Solver of location
[2014 07-09 T 17: 47:05.266 - 07:00] [soa_server22] [WARNING] [] [javax.xml.ws.Service] [tid: orabpel.invoke.pool - 4.thread - 9] [username: GOPAL_TARITLA] [ecid: c17d2d5e5766b07e:-65660a9c:14711d970c3:-8000-00000000000d3eba, 1:33309] [APP: soa-infra] [composite_instance_id: 50029] [composite_name: Dell_Zuora_to_Oracle_Invoice_Iface! 1.4] [Component_name: SFDC] could not read the URL wsdlDocumentLocation WSDL definition: null
[2014 07-09 T 17: 47:05.718 - 07:00] [soa_server22] [ERROR] [] [oracle.soa.adapter] [tid: orabpel.invoke.pool - 4.thread - 9] [userId: GOPAL_TARITLA] [ecid: c17d2d5e5766b07e:-65660a9c:14711d970c3:-8000-00000000000d3eba, 1:33309] [APP: soa-infra] [composite_instance_id: 50029] [composite_name: Dell_Zuora_to_Oracle_Invoice_Iface! 1.4] [component name: SFDC] Salesforce Dell_Zuora_to_Oracle_Invoice_Iface:SFDC [SFDCPortType::query (parameters, parameters)] error sending bytes to socket: java.lang.IllegalStateException: Cipher uninitialized
[2014 07-09 T 17: 47:05.720 - 07:00] [soa_server22] [ERROR] [] [oracle.soa.adapter] [tid: orabpel.invoke.pool - 4.thread - 9] [username: GOPAL_TARITLA] [ecid: c17d2d5e5766b07e:-65660a9c:14711d970c3:-8000-00000000000d3eba, 1:33309] [APP: soa-infra] [composite_instance_id: 50029] [composite_name: Dell_Zuora_to_Oracle_Invoice_Iface! 1.4] [Component_name: SFDC] JCABinding = > Dell_Zuora_to_Oracle_Invoice_Iface:SFDC [SFDCPortType::query (parameters, parameters)] could not invoke operation "application" against the "sales force" due to: []
Error sending bytes: java.lang.IllegalStateException: encryption algorithm not initialized
]]
[2014 07-09 T 17: 47:05.722 - 07:00] [soa_server22] [NOTIFICATION] [] [oracle.soa.adapter] [tid: orabpel.invoke.pool - 4.thread - 9] [username: GOPAL_TARITLA] [ecid: c17d2d5e5766b07e:-65660a9c:14711d970c3:-8000-00000000000d3eba, 1:33309] [APP: soa-infra] [composite_instance_id: 50029] [composite_name: Dell_Zuora_to_Oracle_Invoice_Iface! 1.4] [component name: SFDC] JCABinding = > Dell_Zuora_to_Oracle_Invoice_Iface:SFDC [SFDCPortType::query (parameters, parameters)] modify the logging at TRACE level: n to see the full error stack
[2014 07-09 T 17: 47:05.745 - 07:00] [soa_server22] [ERROR] [] [oracle.soa.adapter] [tid: orabpel.invoke.pool - 4.thread - 9] [username: GOPAL_TARITLA] [ecid: c17d2d5e5766b07e:-65660a9c:14711d970c3:-8000-00000000000d3eba, 1:33309] [APP: soa-infra] [composite_instance_id: 50029] [composite_name: Dell_Zuora_to_Oracle_Invoice_Iface! 1.4] [Component_name: SFDC] JCABinding = > [by default/Dell_Zuora_to_Oracle_Invoice_Iface! 1.4 * soa_bee5ce9f-a39a-4023-b5a6-8c13cbcbf2ad.] SFDC]: query operation failed two-way query()
[2014 07-09 T 17: 47:05.748 - 07:00] [soa_server22] [ERROR] [] [oracle.soa.bpel.engine.ws] [tid: orabpel.invoke.pool - 4.thread - 9] [username: GOPAL_TARITLA] [ecid: c17d2d5e5766b07e:-65660a9c:14711d970c3:-8000-00000000000d3eba, 1:33309] [APP: soa-infra] [composite_instance_id: 50029] [component_instance_id: 50029] [composite_name: Dell_Zuora_to_Oracle_Invoice_Iface! 1.4] [Component_name: Dell_Zuora_to_Oracle_Invoice_Iface] had FabricInvocationException []
java.lang.IllegalStateException: encryption algorithm not initialized
Concerning
TV Gopal
OK guys, we found the solution. We had to update the files of PVE strategy on our SOA server Linux machine.
Thanks to Varun Guruvugari (Support Salesforce) who responded with below the answer on another forum:
--===========================
There are countless reasons for uninitialized encryption error, but I'm sure that this reason is because of SSL certificates and you saw the error above for good reasons that salesforce.com ensures the safety and security.You will be able to integrate successfully in this instance, by deploying the latest version of the files of Extension JCE (Java Cryptography) unlimited strength jurisdiction policy-6 for JDK1.6 on the server SOA in FMW. Here is a good article to allow strong encryption algorithms FMW:http://docs.oracle.com/cd/E19644-01/817-5447/sgencryp.html#wp15647
--===========================
Concerning
TV Gopal
-
Comment of "Syntax error in INSERT INTO statement." validation error.
I had this working perfectly on MySQL. Then I was told that I had to do with a mdb database in Access, now the errors pop up like crazy. I fixed all of them except this one, I get a "syntax error in INSERT INTO statement." When I try to post a comment on a post in my mini-blog site.
The thing is, I use almost the same code for the comments I make blog themselves. The positions work fine, the comments are not.
He said that the error is on my page addcomment_process as 119. It is the following (line 119 is underlined, bold line is also bolded in the error message):
< name cfquery = "input_comments."
DataSource = "" #DSN # ""
username = "" #DSNUSER # ""
password = "#DSNPASS #" >
INSERT INTO (comments)
speaker,
Comment,
DateTime,
post_id
)
VALUES)
"#form.commenter #"
"#form.comment #"
"#form.datetime #"
"#form.post_id #".
)
< / cfquery >
It is all fine data, by simply inserting not, because it says:
"INSERT INTO comments (speaker, comment, datetime, post_id) VALUES ('Anonymous', 'test commentary.', 25 April 12 22:55 ', ' 2').
It worked perfectly, when it was a MySQL database, now I keep getting errors present a part of the site now that it is MDB. Anyone know what is happening?
DateTime is a reserved word in Access.
--
Adam
-
When I run the SQL below, I get the following:
08:00:08 [SELECT - 0 row (s), dry 0.000] [error Code: 904, SQL State: 42000] ORA-00904: "G". "" NAME ": invalid identifier
When I comment the lines "BOLD", it works fine. I tried to fully qualify the column without success. I'm sure it's a matter of formatting.
************************************************
Select
SR. SCHOOLID,
SR. StudentID, sr.coursenumber,
SR. REGISTREQ_ID,
(select
min (rr.ID |) » -'|| URI COURSEGROUP)
Of
REGISTREQ rr
where
RR.grade_level = (select s.sched_nextyeargrade from student s where s.id = sr.studentid)
and rr.yearid = 2100
and rr.id not in (6426,6415)
and rr. COURSEGROUP in
(select
g.Name
Of
g GEN
where
g.CAT = "coursegroups".
and instr (g.valuet, sr.coursenumber) > 0
and g.schoolid = sr.schoolid)
and ((g.name as 'ALT %' and sr. GLOBALALTERNATECOURSE = 1)
or (g.name not as 'ALT %' and sr. GLOBALALTERNATECOURSE = 0))
) as New_RegID
Of
SCHEDULEREQUESTS sr
where
SR. SCHOOLID = 703
and sr.yearid = 2100This is because the lines that you have Ringing are out of reach for the alias 'g', which is part of the inner query.
Maybe you want to just 'name' without the prefix "g.".
-
Stop forced because of the State RFS_ERROR
Hello
I have observed the following error message in the log backup of database alerts. I use db 10g on linux.
Tue may 18 17:10:16 2010
RFS [1]: file locked journal thread 0 1 sequence 1156652
RFS: State of the '2' error Mode
RFS: Forced to stop because of the State RFS_ERROR
Again shipping customer logged in as PUBLIC
But after that, the process is normal, it normally does media recovery.
Please tell me under what circumstances this type of error occurs?
Thank you
KouadioAre there any error messages in the primary alert.log? He may also run into the bug described in MOS Doc 6311900.8 (Bug 6311900 - RFS wrote misleading messages in the alerts log)
HTH
Srini -
avgnt.exe - system error because mfc100u.dll missing in my computer
my computer can't start running because that fail avgnt.exe system error because mfc100u.dll missing in my computer
Start in safe mode, uninstall Avira AV, see if the PC boots normally
-
I have NEED of HELP PLEASE I am trying to copy a CD but get an error in the column State of Rip. Has not changed any option, as I just ripped a CD yesterday. HELP PLEASE!
Hello
1. What is the exact error message?
2. is the issue specific to this particular CD/DVD?
3 did you changes to the computer, before the show?
Method 1:
Run the Windows Media Player settings troubleshooter.
Open the troubleshooting Windows Media Player settings Troubleshooter
Method 2:
Change the settings for the extraction of music and the audit.
-
Error: "because of spam, this content is blocked"
I can't post my reply in the discussion in:
All locations > Fusion Middleware > identity management > Identity Manager > Discussions
because I always get the error: "because of spam, this content is blocked.
This can happen if your message contains a Word from the black list. It's that we do not know what words are on the blacklist.
The only way to know is to answer with only a part of your answer and change the answer until you find work that triggers the spam warning.
Timo
-
(1) error saving to /bootbank State
One of our hosts esxi 5.5 (Build 2718055) is sending the following alarm:
vmwVpxdObjValue: = alarm. HostErrorAlarm - event: Home warning (4996019)
Summary: Problem detected on the host computer in Angel House: (1) error saving to /bootbank State
Please see the following KB for additional References
-
Error reading from file: state .tgz-3.
I'm under ESXi v3, but I couldn't find anything except 4 or 5 on the forums. in any case, I am very new to VMWare and this configuration inherited from my predecessor. Today, we had to stop everything for some work on our electrical systems. I stop the VM machine and then put the host in maintenance mode. After that, we did a clean power down. From switching back on, I get the following error:
Error reading from file: state .tgz-3.
Help, please. It comes to our business files server which is completely offline now.
You see your data warehouse? If so, consult and find the folder of the virtual machine and then make a right click the .vmx for comments and add to the inventory.
-
ESXi v3.5 - PANIC: error reading from file: state .tgz-5
Hello.
Recently, suffered a power outage that caused a stop. After the reboot, I get the following error:
PANIC: Error reading from file: state .tgz-5
As it is a recent construction, I did have the chance to perform a backup, a restore is not possible. Run a repair had no effect. Is there anything else I can do to get it back?
Thanks in advance.
CJ.
try running this command in ESX console #fdisk-l and check if there is any partition VMFS (fb) detected.
-
try to load a new style for a project. CS5 PSD. the .asl file when you drag in the RFSO gives follows her "error, because no file format or the parser cannot open the file." What gives?
.asl files are layer styles
You can go to the window > Styles, then load the styles in the drop-down Styles menu of the
-
Error in the SQL statement when executing ETL of DAC
Hi all
I have installed and configured the 7.9.6.3 biapps, then I run the full load of the CRM - loyalty in DAC topic. And I got the error task failed, I check the Session to the Informatica server log files.
view of $ SEBL_VERT_811.DATAWAREHOUSE. SDE_SBL_Vert_811_Adaptor.SDE_GeographyDimension_Business.log
DIRECTOR > use VAR_27028 replace value [0] for the variable defined by the workflow/worklet user: [$passInStatus].
DIRECTOR > VAR_27028 use override the value [DataWarehouse] session parameter: [$DBConnection_OLAP].
DIRECTOR > VAR_27028 use override the value [SEBL_VERT_811] for the session parameter: [$DBConnection_OLTP].
DIRECTOR > VAR_27028 use override the value [SEBL_VERT_811.DATAWAREHOUSE. SDE_SBL_Vert_811_Adaptor.SDE_GeographyDimension_Business.log] for the session parameter: [$PMSessionLogFile].
DIRECTOR > VAR_27028 use override value [1] to parameter mapping: [MPLT_LOAD_W_GEO_DS. [DATASOURCE_NUM_ID$ $].
DIRECTOR > VAR_27028 use override value for the parameter mapping]: [$$ Hint1].
DIRECTOR > VAR_27028 use override value for the parameter mapping]: [$$ council2].
DIRECTOR > session initialization of TM_6014 [SDE_GeographyDimension_Business] to [my Jul 25 17:29:47 2011].
DIRECTOR > name of the repository TM_6683: [Oracle_BI_DW_Base]
DIRECTOR > TM_6684 server name: [Oracle_BI_DW_Server]
DIRECTOR > TM_6686 folder: [SDE_SBL_Vert_811_Adaptor]
DIRECTOR > Workflow TM_6685: [SDE_GeographyDimension_Business] run the Instance name: Id series []: [260]
DIRECTOR > mapping TM_6101 name: SDE_GeographyDimension_Business [version 1].
DIRECTOR > TM_6963 pre 85 Timestamp compatibility is enabled
DIRECTOR > the TM_6964 Date of the Session format is [HH24:MI:SS DD/MM/YYYY]
DIRECTOR > TM_6827 [u01/app/oracle/biapps/dev/Informatica/9.0.1/server/infa_shared/Storage] will be used as the storage of session directory [SDE_GeographyDimension_Business].
DIRECTOR > CMN_1802 Session recovery cache initialization is complete.
DIRECTOR > configuration using [DisableDB2BulkMode, Yes] TM_6708 property
DIRECTOR > configuration using TM_6708 [ServerPort, 6325] property
DIRECTOR > configuration using [overrideMpltVarWithMapVar Yes] TM_6708 property
DIRECTOR > configuration using TM_6708 [SiebelUnicodeDB,SIEBEL@ANSDEV dwhadmin@ANBDEV] property
DIRECTOR > TM_6703 Session [SDE_GeographyDimension_Business] is headed by 64-bit integration Service [node01_hkhgc01dvapp01], [version9.0.1 HotFix2], build [1111].
MANAGER > PETL_24058 Running score of the Group [1].
MANAGER > initialization of engine PETL_24000 of parallel Pipeline.
MANAGER > PETL_24001 parallel Pipeline engine running.
MANAGER > session initialization PETL_24003 running.
MAPPING > CMN_1569 Server Mode: [UNICODE]
MAPPING > code page of the server CMN_1570: [Unicode UTF-8 encoding]
MAPPING > TM_6151 the session to the sort order is [binary].
MAPPING > TM_6185 warning. Code page validation is disabled in this session.
MAPPING > treatment of low accuracy using TM_6156.
MAPPING > retry TM_6180 blocking logic will not apply.
MAPPING > TM_6187 Session focused on the target validation interval is [10000].
MAPPING > TM_6307 DTM error log disabled.
MAPPING > TE_7022 TShmWriter: initialized
MAPPING > DBG_21075 connection to the database [ANBDEV], [dwhadmin] users
MAPPING > Search CMN_1716 [MPLT_LOAD_W_GEO_DS. LKP_W_LST_OF_VAL_G] uses the connection to database [relational: DataWarehouse] in [UTF-8 encoding Unicode] code page
MAPPING > Search CMN_1716 [MPLT_LOAD_W_GEO_DS. LKP_W_GEO_DS] uses the connection to database [relational: DataWarehouse] in [UTF-8 encoding Unicode] code page
MAPPING > DBG_21694 AGG_COUNTRY_CITY_ZIPCODE [0] Partition: size = [1048576] Index cache, data cache size = [2097152]
MAPPING > TE_7212 increasing [Cache of Index] size of transformation [AGG_COUNTRY_CITY_ZIPCODE] of [1048576] to [2402304].
MAPPING > TE_7212 increasing [Cache data] size of transformation [AGG_COUNTRY_CITY_ZIPCODE] of [2097152] to [2097528].
MAPPING > TE_7029 aggregate information: create the new Index and data files
MAPPING > TE_7034 aggregate information: Index file is [u01/app/oracle/biapps/dev/Informatica/9.0.1/server/infa_shared/Cache/PMAGG14527_3_0_260.idx]
MAPPING > information aggregated TE_7035: data file is [u01/app/oracle/biapps/dev/Informatica/9.0.1/server/infa_shared/Cache/PMAGG14527_3_0_260.dat]
MAPPING > TM_6007 DTM initialized successfully for the session [SDE_GeographyDimension_Business]
DIRECTOR > PETL_24033 all the DTM connection information: [< NO >].
MANAGER > PETL_24004 from the tasks before the session. : (My Jul 25 17:29:47 2011)
MANAGER > task PETL_24027 before the session completed successfully. : (My Jul 25 17:29:47 2011)
DIRECTOR > PETL_24006 from data movement.
MAPPING > Total TM_6660 Buffer Pool size is 36000000 bytes and block size is 128000 bytes.
LKPDP_2 > search for DBG_21097 Transformation [MPLT_LOAD_W_GEO_DS. LKP_W_GEO_DS]: default sql to create the cache of research: SELECT CITY, COUNTRY, POSTAL code, STATE_PROV OF W_GEO_DS of the ORDER BY CITY, COUNTRY, POSTAL code, STATE_PROV
LKPDP_1 > search for DBG_21312 Transformation [MPLT_LOAD_W_GEO_DS. LKP_W_LST_OF_VAL_G]: search replace sql to create the cache: SELECT W_LST_OF_VAL_G.VAL AS VAL, W_LST_OF_VAL_G.R_TYPE AS R_TYPE FROM W_LST_OF_VAL_G
WHERE
W_LST_OF_VAL_G.R_TYPE LIKE '% ETL' ORDER BY R_TYPE, VAL
LKPDP_1 > TE_7212 increasing [Cache of Index] size of transformation [MPLT_LOAD_W_GEO_DS. LKP_W_LST_OF_VAL_G] of [1048576] to [1050000].
LKPDP_2 > TE_7212 increasing [Cache of Index] size of transformation [MPLT_LOAD_W_GEO_DS. LKP_W_GEO_DS] of [20000000] to [20006400].
LKPDP_2 > TE_7212 increasing [Cache data] size of transformation [MPLT_LOAD_W_GEO_DS. LKP_W_GEO_DS] of [20000000] to [20004864].
READER_1_1_1 > DBG_21438 Reader: Source is [ANSDEV], [SIEBEL] users
READER_1_1_1 > code page Source of BLKR_16051 database connection [SEBL_VERT_811]: [Unicode UTF-8 encoding]
READER_1_1_1 > BLKR_16003 initialization completed successfully.
WRITER_1_ * _1 > WRT_8146 author: target's database [ANBDEV], user [dwhadmin], loose [on] mode
WRITER_1_ * _1 > WRT_8106 WARNING! Session Mode Bulk - recovery is not guaranteed.
WRITER_1_ * _1 > code page target database connection [Data Warehouse] WRT_8221: [Unicode UTF-8 encoding]
WRITER_1_ * _1 > target WRT_8124 W_GEO_DS of Table: SQL INSERT statement:
INSERT INTO W_GEO_DS(CITY,CONTINENT,COUNTRY,COUNTY,STATE_PROV,ZIPCODE,DATASOURCE_NUM_ID,X_CUSTOM) VALUES (?,?,?,?,?,?,?,?)
WRITER_1_ * _1 > WRT_8020 No. column that is marked as the primary key for the table [W_GEO_DS]. Updates not supported.
WRITER_1_ * _1 > connection WRT_8270 #1 target group consists of target (s) [W_GEO_DS]
WRITER_1_ * _1 > WRT_8003 writer initialization complete.
READER_1_1_1 > BLKR_16007 player run began.
WRITER_1_ * _1 > WRT_8005 writer run began.
WRITER_1_ * _1 > WRT_8158
START SUPPORT SESSION *.
Startup load time: my Jul 25 17:29:47 2011
Target table:
W_GEO_DS
READER_1_1_1 > RR_4029 SQ [SQ_S_ADDR_ORG] User Instance specified SQL query [SELECT DISTINCT
S_ADDR_ORG. CITY,
S_ADDR_ORG. COUNTRIES,
S_ADDR_ORG. COUNTY,
S_ADDR_ORG. PROVINCE,
S_ADDR_ORG. STATE,
S_ADDR_ORG. Zip code
'0' AS X_CUSTOM
Of
V_ADDR_ORG, S_ADDR_ORG
]
READER_1_1_1 > RR_4049 SQL query sent to the database: (my Jul 25 17:29:47 2011)
READER_1_1_1 > CMN_1761 Timestamp event: [lun 25 juil 17:29: 47 2011]
READER_1_1_1 > RR_4035 SQL Error]
ORA-00942: table or view does not exist
Database driver error...
Function name: run
Stmt SQL: SELECT DISTINCT
S_ADDR_ORG. CITY,
S_ADDR_ORG. COUNTRIES,
S_ADDR_ORG. COUNTY,
S_ADDR_ORG. PROVINCE,
S_ADDR_ORG. STATE,
S_ADDR_ORG. Zip code
'0' AS X_CUSTOM
Of
V_ADDR_ORG, S_ADDR_ORG
Fatal error Oracle
Database driver error...
Function name: run
Stmt SQL: SELECT DISTINCT
S_ADDR_ORG. CITY,
S_ADDR_ORG. COUNTRIES,
S_ADDR_ORG. COUNTY,
S_ADDR_ORG. PROVINCE,
S_ADDR_ORG. STATE,
S_ADDR_ORG. Zip code
'0' AS X_CUSTOM
Of
V_ADDR_ORG, S_ADDR_ORG
[Error fatal Oracle].
READER_1_1_1 > CMN_1761 Timestamp event: [lun 25 juil 17:29: 47 2011]
READER_1_1_1 > BLKR_16004 ERROR: prepare failed.
WRITER_1_ * _1 > WRT_8333 roll back all the targets due to the fatal error of session.
WRITER_1_ * _1 > rollback WRT_8325 Final, executed for the target [W_GEO_DS] at end of load
WRITER_1_ * _1 > WRT_8035 of full load time: my Jul 25 17:29:47 2011
SUMMARY OF THE LOAD
============
WRT_8036 target: W_GEO_DS (Instance name: [W_GEO_DS])
WRT_8044 responsible for this target data no.
WRITER_1__1 > WRT_8043 * END LOAD SESSION *.
MANAGER > PETL_24031
PERFORMANCE INFORMATION FOR TGT SUPPORT ORDER [1] GROUP, SIMULTANEOUS GAME [1] *.
Thread [READER_1_1_1] created [stage play] point score [SQ_S_ADDR_ORG] is complete. Running time total was enough for significant statistics.
[TRANSF_1_1_1] thread created for [the scene of transformation] partition has made to the point [SQ_S_ADDR_ORG]. Running time total was enough for significant statistics.
[TRANSF_1_2_1] thread created for [the scene of transformation] partition has made to the point [AGG_COUNTRY_CITY_ZIPCODE]. Running time total was enough for significant statistics.
Thread [WRITER_1_ * _1] created for [the scene of writing] partition has made to the point [W_GEO_DS]. Running time total was enough for significant statistics.
MAPPING > CMN_1791 size which would take [0] groups total lines of entry for [AGG_COUNTRY_CITY_ZIPCODE], in memory, it is [0] index cache bytes
MAPPING > CMN_1790 cached data size that would [0] groups total lines of entry for [AGG_COUNTRY_CITY_ZIPCODE], in memory, bytes [0]
MAPPING > CMN_1793 index cache size which would hold [0] lines in the table to search for [MPLT_LOAD_W_GEO_DS. LKP_W_LST_OF_VAL_G], in memory, is bytes [0]
MAPPING > CMN_1792 cached data size that would [0] lines in the table to search for [MPLT_LOAD_W_GEO_DS. LKP_W_LST_OF_VAL_G], in memory, is bytes [0]
MAPPING > CMN_1793 index cache size which would hold [0] lines in the table to search for [MPLT_LOAD_W_GEO_DS. LKP_W_GEO_DS], in memory, is bytes [0]
MAPPING > CMN_1792 cached data size that would [0] lines in the table to search for [MPLT_LOAD_W_GEO_DS. LKP_W_GEO_DS], in memory, is bytes [0]
MANAGER > PETL_24005 from tasks after the session. : (My Jul 25 17:29:47 2011)
MANAGER > task of PETL_24029 after the session completed successfully. : (My Jul 25 17:29:47 2011)
MAPPING > cache TE_7216 deleting files [PMLKUP14527_524289_0_260L64] for processing [MPLT_LOAD_W_GEO_DS. LKP_W_LST_OF_VAL_G].
MAPPING > cache TE_7216 deleting files [PMLKUP14527_524293_0_260L64] for processing [MPLT_LOAD_W_GEO_DS. LKP_W_GEO_DS].
MAPPING > TM_6018 the session completed with errors of processing row [0].
MANAGER > TE_7216 deleting files cache [u01/app/oracle/biapps/dev/Informatica/9.0.1/server/infa_shared/Cache/PMAGG14527_3_0_260.idx] for [AGG_COUNTRY_CITY_ZIPCODE] transformation.
MANAGER > TE_7216 deleting files cache [u01/app/oracle/biapps/dev/Informatica/9.0.1/server/infa_shared/Cache/PMAGG14527_3_0_260.dat] for [AGG_COUNTRY_CITY_ZIPCODE] transformation.
MANAGER > parallel PETL_24002 engine Pipeline completed.
DIRECTOR > Session PETL_24013 run duly filled with failure.
DIRECTOR > TM_6022
PLENARY OF THE LOAD
================================================
DIRECTOR > TM_6252 Source load summary.
DIRECTOR > Table CMN_1740: [SQ_S_ADDR_ORG] (name of the Instance: [SQ_S_ADDR_ORG])
Output [0] lines, affected lines [0], applied [0] lines, rejected lines [0]
DIRECTOR > TM_6253 Target Load summary.
DIRECTOR > Table CMN_1740: [W_GEO_DS] (name of the Instance: [W_GEO_DS])
Output [0] lines, affected lines [0], applied [0] lines, rejected lines [0]
DIRECTOR > TM_6023
===================================================
DIRECTOR > TM_6020 Session [SDE_GeographyDimension_Business] to [my Jul 25 17:29:48 2011].
After reviewing the log, I found the select statement fails, the SQL below was wrong:
SELECT DISTINCT
S_ADDR_ORG. CITY,
S_ADDR_ORG. COUNTRIES,
S_ADDR_ORG. COUNTY,
S_ADDR_ORG. PROVINCE,
S_ADDR_ORG. STATE,
S_ADDR_ORG. Zip code
'0' AS X_CUSTOM
Of
V_ADDR_ORG, S_ADDR_ORG
There is no V_ADDR_ORG but the table S_ADDR_ORG in the transaction of Siebel database. So I don't know why he build this sql when data transfer to OBAW. It is the fate of bi box app.
Experts! How could I solve this problem? Please help, thanks a lot!
Best regards
RyanRyan,
Yes, you missed to create views for the source tables. both in the design of dac > tables tab, select any table and clieck right on it and then click capture of change scripts > generate scripts from view. It will ask you if it can generate a script for all tables. so it will generate the script from view for you. now run the whole esript in the source database. then your problem will be solved.
If this answers your question. do my correct answer.
Thank you
Jay. -
Madam/Sir,
I log on this site everyday to make a contribution (http://theanimalrescuesite.greatergood.com/clickToGive/home.faces?siteId=3) and during the last three days, I was unable to connect. Today, I get this message: XML parsing error: State unexpected location parser: jar:file:///C:/Program%20Files%20 (x 86) /Mozilla%20Firefox/browser/omni.ja!/chrome/browser/content/browser/abt
Best regards
Peter
What Firefox locale (UI language) do you use?
Try a clean reinstall and delete the program folder before Firefox to (re) install a new copy of the current version of Firefox.
- Download the installer of Firefox and save the file to the desktop
https://www.Mozilla.org/en-us/Firefox/all/
If possible to uninstall your current version of Firefox to clean the Windows registry and settings in the security software.
- Do NOT remove the "personal data" when you uninstall your current version of Firefox, because this will remove all profile folders and you lose personal data such as bookmarks and passwords including data profiles created by other versions of Firefox.
Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.
- (32-bit Windows) "C:\Program Files\Mozilla Firefox\"
- (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
- It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
- http://KB.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but do NOT delete personal data when you uninstall Firefox which removes all Firefox profile folders and you lose your data.
- Download the installer of Firefox and save the file to the desktop
Maybe you are looking for
-
Since the last update on the Galaxy S3, the touchscreen mini generally connects to a link about two highest places of the affected spot, or not at all if no link. (Same problem on the phone of the wife). Makes navigation nearly impossible, as must gu
-
Why the above icons on the page can not activate?
top most tab in this particular page does not work when you click them (are, this page, denrkz, disconnection, reception, other application, desktop/mobile and research field including the arrow "go")
-
All-in-One Photosmart 3210 error messages
When it works the 3210 did a wonderful job. I am running Vista Home Premium on an HP Pavilion a6234x Desktop PC, automatic updates from Microsoft. Starting and restarting, I consistenly get an error as follows: "worker HPProduct - the component you a
-
I'm runnign windows xp home edition - with aol as my internet provider. I've known extremely long delays in response times - often enough, it can take 10-15 minyes to open my internet session - other times it can be quite fast - compliant nothing. !!
-
Is Microsoft digital image suite 10 compatible with Windows Vista?
Help! I just got a computer with vista. I want to use this program, but it will not work properly. y at - it a patch or an upgrade, I can get? I like the software and want to continue using it.