Sampling of colors with the eyedropper does not work.

Similar Questions

• How can I get the serial number for update for first pro cs4 4.2.1, one provided with the product does not work.

  How can I get the serial number for update for first pro cs4 4.2.1, one provided with the product does not work?

  You don't need a serial nr for updating a program

  You need the original CS4.0. install and add the series nr. to get the program to work.

  Now you can update to 4.2.1

• Photo filter in CS4 - using the eyedropper does not work

  Sometimes I correct a dominant book using the photo filter, a technique that I shot of Katrin Eismann "restoration and retouching" color all over.
  

  
  

  You add a layer of Photo filter, make sure the 'brightness' checkbox is checked, push 'density' up to 100% and click the shade of color in the dialog box.

  
  

  Select color filter dialog box opens, with digital displays for STL, RGB, CMYK and Lab color In addition, the cursor turns into a dropper.

  
  

  You click in a box to the image problem. Change numbers. You reverse the 'a' and 'b' values in LAB color boxes. For example if LAB is called 65,16,24, you replace 16 and 24-16 and -24 (so that in my example the LABORATORY values are now 65-16,-24. You click OK and then adjust the opacity of the layer of color filter to your liking.
  

  
  

  Today I tried this in CS4 for the first time. When I click in a box to the image problem, LAB values becomes 100,0,0 - whatever the picture, no matter where I click.
  

  
  

  This result is not consistent. I did a number of tests on 2 different images, try stuff as brightness release, mowing the Photo layer filter to the underlying layer, use the dialog box filter of Photo that you can access from the bottom of the layers palette, rather than the settings panel, etc. Twice I got reasonable values when I clicked on the picture of the select a color filter dialog box. But try again the same parameters (brightness turned off, for example) into another image, or in the same image, led to the now dreaded 100,0,0
  

  
  

  I have reset my prefs. Same result.
  

  
  

  I got my partner to try it. He got the same result. I am running CS4 on Windows 7 x 64. It is on a Mac with Snow Leopard.

  
  

  Is this a known issue?
  

  
  

  Thank you
  

  
  

  Mary
  

  This is because the layer mask is active and therefore clicking on the image with the eyedropper picked up the pure white of the layer mask. You can also see that, in the title bar, it should say something like (Photo Filter 1, Layer Mask/8). To fix it just click on the adjustment layer thumbnail of the

• with the syntax does not work

  Oracle Database 10g Release 10.2.0.4.0 - Production
  PL/SQL Release 10.2.0.4.0 - Production
  CORE 10.2.0.4.0 Production
  AMT for 32-bit Windows: release 10.2.0.4.0 - Production
  NLSRTL Version 10.2.0.4.0 - Production
  

  SQL> with t as
  unknown command "with t as" - rest of line ignored.

  Why is the syntax does not
  There is a sine qua non?
  
  Thanks in advance

  Because apparently your SQL * Plus version is too old and needs to be upgraded.

  I get to:

  -SQL * more: release 10.2.0.3.0 - Production 3 Jul 11:15:46 Mar 2012

  Copyright (c) 1982, 2006, Oracle. All rights reserved.

  Connected to:
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
  With partitioning, OLAP, Data Mining and Real Application Testing options

  no error:

  SQL>  with t as
    2   (select * from dual)
    3  select * from t;
  
  D
  -
  X
  
  1 row selected.
  

• With the clause does not work in SqlPlus for DataBase 11 GR 8 1 material

  I have 11 GR 1 database material, when I connect to my database through SqlPlus (version 8.0.6.0.0) this query

  with x as (select * from areas) select * from x;

  does not work. But when you use SqlPlus provided by 11g, this query works well. This query can run on an older version of SqlPlus?

  user12222356 wrote:
  This client software is installed with Oracle developer 6i form. should I remove all the form developer? Latest version of the form developer is available for 11 GR 1 matter?

  Well, you have problems with the developer of forms?

  I wouldn't recommend delete because you have problems with the SQL more customer that goes with it. I recommend to download the instant client and using them for your needs of sqlplus and leaving the rest products installed on your machine only.

• WITH THE CLAUSE DOES NOT WORK

  Hello everyone,
  I have the suite Oracle version:
  
  SQL & gt; selection of version of $ v; *
  
  BANNER
  ----------------------------------------------------------------
  Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64 bit Production
  PL/SQL Release 9.2.0.8.0 - Production
  CORE Production 9.2.0.8.0
  AMT for Solaris: 9.2.0.8.0 - Production Version
  NLSRTL Version 9.2.0.8.0 - Production
  
  But when I try to run a query with * 'with the clause"* it gives following error:
  
  SQL & gt; with sam as (select from asap.triangular_reco_aug) *.
  SP2-0734: beginning of unknown command «with sam a...» "- rest of line is ignored.
  SQL & gt;
  
  Could someone please why this is happening?

  What is your version of SQL * more? If you are using a version earlier than 9.2 then it is probably intercept the syntax error before it happens even to the database that supports.

• WITH the Clause does not work in 11g

  Hi all

  I run this query via PL/SQL developer in 11g, but it shows no data to me.

  with aquery as (c1, c2 from t1 select where c2 = 20130101) select * from aquery.

  However, when I run only the SELECT, and then it retrieves the output.

  Select c1, c2 from t1 where c2 = 20130101

  The db user privileges both CREATE MV and CREATE Table in this database.

  Thank you.

  I have no developer PL/SQL, but I do not have 11.2.0.4, and your query works for me in sqlplus and SQL Developer, the problem is with PL/SQL Developer, or maybe a transient network issue any.  You simply get an error any or all not the lines selected?

  John

• Problems with my sound doesn't play not even though the settings say that the audio does not work properly

  recently I went on vacation... sound computer works very well before I left. Came back, and now the sound does not work.  I checked all the settings and it says everything is working. I've done some research and there was only one window to come when I rebooted that says a file with the extension dll is not found.  So I restored by computer back to before I left on vacation, but still no sound.  No pop up with the dll is not found though.  I went in the "maintenance" section and found it seems to be a few questions audio below is the scheme which is the filler. Hope this is enough information for assistance.  said the task of event 20 116.  I have an ACER one with windows. the computer has HDMI dolby and realtek.

  -

  -

   

    20

    0

    4

    116

    0

    0 x 800000000000000

   

    3490

   

   

    Microsoft-Windows-Audio/PlaybackManager

    LorrainesPC

   

   

  -

    3

    48000

    fake

   

   

  Judy Hello,

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  According to the description, I understand you have a problem with the sound does not work properly in the computer even if the settings say that the audio does not work properly.

  Certainly, I understand your concern and will try my best to help you.

  I appreciate all your efforts really to try to solve this problem.

  This issue would have intervened if the sound card has went wrong in the computer or audio drivers have been corrupted.

  I would suggest trying the following methods and check if that helps.

  Method 1:

  I suggest you to refer to the procedure described in the article below and check if it helps.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note: The above article will help you identify and solve its current problems in Windows, including no sound from your speakers or headphones.

  Also try to install the latest drivers from the chipset in the system and check if it helps.

  If the problem persists, follow method 2

  Method 2:

  How to use the tool File Checker system to fix missing or damaged system files, please follow the steps in the link provided below.

  https://support.Microsoft.com/kb/929833?WA=wsignin1.0

  Note: System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. This article explains how to run the tool (SFC.exe) System File Checkerto scan your system files and to repair the missing system or damaged files from Windows or Windows 8 8.1. If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• Sampling of colors with the brush by holding down the ALT key does not work

  I am train to sample a color with the brush on a layer tool empty while the paint holding the key ALT on my mac, but it does not work for me on Photoshop CC. Is there a setting I'm missing?

  Thank you

  Juliano

  Select the eyedropper tool, check in options. "All layers" is selected?

  

• How to sample the color with the eyedropper tool and have it be the foreground color?

  How to sample the color with the eyedropper tool and have it be the foreground color?

  Use the keyboard shortcut to set the default foreground sample.

  The sample of foreground (top left in the screen shot) is visible and you just click on the color with the eyedropper tool to change.

  You can also use x to exchange the undertone in the foreground if you want to change that.

  

• Pick color with the eyedropper loads in the background color

  I'm not sure what would have caused this, but now all of a sudden, whenever I click on a color with the eyedropper tool, it loads this color in the background color instead of the sample of foreground. If I hold down the Option key and click, it loads in the sample of foreground, then the behavior is backwards. How to switch this back?

  It looks like somehow the default color sample is activated in the color Panel.

  In photoshop, go to the window > color

  Then click on the foreground swatch to make that the default.

  The default color chart always has a white or grey outside line.

  

• How to use a USB microphone with voice dictation on MacBook Air?  Machine recognizes the USB device, but the microphone does not work.

  How to turn on a microphone USB bluetooth with voice dictation (Dragon for MAC) on the MacBook Air?  Machine recognizes the USB device, but the microphone does not work.   I don't see no response.   I use OS X 10.10.

  Version OS X?

• Last night, I did a scan on my computer. He went only 3% when it froze with the server does not.

  Last night, I did a scan on my computer. He went only 3% when it froze with the server does not.

  Can you please explain the concept of what a server is and how can I ensure this does not happen.

  Thank you very much

  original title: Server

  Last night, I did a scan on my computer. He went only 3% when it froze with the server does not.

  Can you please explain the concept of what a server is and how can I ensure this does not happen.

  Thank you very much

  Launched a scan with which product (be specific, up to the exact version)?

  What version and architecture of Windows are you using?

• Unable to turn on the window Defender, even after that I click on activate the defender of the window. THA page with the tool does not appear...

  Unable to turn on the window Defender, even after that I click on activate the defender of the window on my window vista home premium... The page with the tool does not appear...

  If you have
  one of the following AV, antivirus, programs installed, it will stop your
  Windows Defender. Purpose of these AVs have their own advocates. 2 defenders
  on the same machine will create conflicts.
  Bottom line: it's ok.
  It's normal.
  List of AVs which will stop Windows Defender

  Norton
  McAfee
  AVG
  Microsoft Security
  Essentials

  If you do not have the
  above AV programs, here's how to do to restart Windows Defender:

  Start button > in the search box, type Services > press the Enter key > scroll to find Windows Defender, click on it >...
  topic status , it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say that, right click on Windows
  Defender > click Properties > to
  Startup type, click on the pointer to the right and select automatic
  to the service status, click Start
  Click OK when finished.

• Sometimes the audio does not work and another day, everything is ok. What can this be? IK have an Asus laptop and I work with windows 7. The melody of the beginning when I put on my laptop is ok

  Sometimes the audio does not work and another day, everything is ok. What can this be?  IK have an Asus laptop and I work with windows 7. The melody of the beginning when I put on my laptop is ok

  Hello Ronald.

  A problem are not uncommon. Something for you to try:

  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let me know if this solves the problem for you.

  Kind regards

  BearPup