Sansa headset - = nothing to them?

Similar Questions

• Can connect several headsets (and ask them to WORK)?

  Is there some sort of advanced setting somewhere that allows you to have two headphones audio output at the same time?

  A much easier way.  Get a separator.  Plug in the hfone > plug the two hfones.

• I can't open my files on my key USB how to remove the virus lurking in them?

  I have USB drives where I kept a few important pictures, but I can't access it. When I put the disc in my computer, they are recognized, but when I opened them they show that there is nothing in them. I guess it's a virus, how can I remove it?

  On what device were USB drives when the photos were saved?

  What version of OS X you have on your MBPro?

• Slate 10 HD is not pairing with a bluetooth headset

  Hello

  I'm trying to pair my headset to bluetoothLG to 10 HD slate. The LG headset device is with the Tablet without obstructions. On the slate, the peripheral HBS730 LG does not appear.

  I can easily pair it with my ipone and an ipad. On the tab, the device does not appear. I see other devices (pc and nuvi headset).

  Thank you

  Hello and welcome to the HP support community!

  Try restarting the Tablet by feeding comepletely off the power and then turn it on.

  Be sure to follow the manufacturer's directions headset to place / them in "Pairing Mode", then activate BlueTooth on the slate of 10 and tell him to "Scan for devices.  Scanning/BlueTooth/App settings button.

  I got no problem with adding BT devices to my slate loan 10 HD...

  WyreNut

• Logitech usb headset not automatically activated when it is plugged

  On my old XP computer, whenever I plugged my Logitech USB headset, they are automatically detected and enabled, the its path from the speakers to the headphones when the pc has detected the and back to speakers when headphones unplugged, without me having to enter anything. On my new 64 bit Windows 7 pc, I have to open the Sound / select USB Logitech headset and set them as default. On the removal of the helmet, then I have to reverse the sequence. Both PCs have its Soundblaster cards.

  Is there a way to allow the pc to automatically detect the helmet and set them as value by default when it is connected, and vice versa when disconnected, without having to open the audio window all the time.

  Hello

  It will automatically be in headset mode when you plugin and when you remove the headset it will move to sprakers.

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try to run this under fixit and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  Method 2:
  Also, try to update the latest drivers for the sound card and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  It will be useful.

• Sony Bravia KDL-32R300C

  My Sony Bravia KDL-32R300C worked very well and all of a sudden when I used the headset and pull them out there is no hollow sound speakers. When I increase the volume, I see the icon of headset eventough no headphones are attached. I have check the setting of the sound and is set on the speakers. I have reset the audio system, nothing done. Is there anything else I can try it or the entrance helmet damaged? Thank you for any input on this issue.

  I called Sony Support and they gave me a solution to this problem. You must use the original supplied with the TV remote control.

  1. press the HOME button

  2. Select PREFERENCES

  3. Select SETTINGS

  4. Select SET UP

  5. Select SET UP AV

  6. Select speakers

  7. Select SYSTEM AUDIO (will turn you back to speakers of the TV to step 11)

  8. Select HEADPHONES speaker CONNECTION

  9. Select DISABLED

  10. Select again PREGNANT

  11. Select TV speakers

  Your sound should be back. The downside: when you connect your headphones you will have sound in the speakers and headphones! For sound only on the helmet, you will need to turn headset speaker Link ON.

  It worked for me. I hope it helps someone else.

• Satellite A300 Vista - no sound

  Hello

  The sound then has full on my Satellite A300 on Control Panel etc. Playback, no sound, off headset nothing anyway.
  I went on the sound, hardware and Control Panel. On the first section, somehow I wiped the image of Realtek and the image of the speaker.

  I downloaded the Realtek, but cannot reload, or the logo of the speaker?
  What should I do to get that back?

  What caused the problem in the first place?
  Could he have put a SKYPE phone on it?

  Hello

  I must say that your post is really confusing.
  I put t know how someone could erase the image of Realtek and the image of the speaker.

  But I'll try to help you.
  I think you need to access the Device Manager first and should remove your sound card in the list of devices.
  Reboot the laptop and after new restart try reinstalling the audio driver that you downloaded from the European driver Toshiba page.

  Usually, this should contribute to renew the sound card driver and retrieve the sound!

  Welcome them

• Download and "space message".

  I bought my SanDisk Clip + a few months pass and am totally frustrated with it.  I'm not sure if part of the problem is that I use Mac and not a PC.  First of all, I was never able to get the Clip + to accept more than 40 songs.  Although the music folder seems to contain more than 150 songs, only about 40 would play.  I went through the troubleshooting and felt he had something to do with iTunes, limiting the number of times that that a song could be copied with other devices, but I don't know who is right.  Several times I tried to delete all the music and copying with other music, but I never have the best chance to get more music on the device.

  After fiddling around with him still, the Clip + says "not enough space for music DB - but there isn't any music on the device.»  I tried to reset to the factory settings.  I'm at my wit's end.  I want to do this work because I like the way the device works and sounds and I want to avoid the iPods and iTunes and get out from under the thumb of Apple.

  How I can make this work and how can I download music from another source?  I'm not quite technically incompetent, but I'm certainly not a tech savvy uber person either.

  Thanks to all those who can help you.

  The message 'space' insufficient often means that there is a file corrupted on the internal memory. One thing that often arrange is to run Windows error checking, assuming that you have a friend with a PC.

  On the unit back Settings/System Settings/USB Mode and make SMC (which is the mode that the Mac will use anyway).

  To connect to a Windows computer. Find the item listed as a hard drive. Right-click, properties/tools (a tab) / error checking. Who can fix a bad file.

  While you're hooked to Windows, search for files named MACOSX unit. These are the little ghost files - Mac files Finder - only 1 KB of size with names like call them. _. 01 FirstSong.mp3. The Sansa sees the .mp3 file type and try to play them, but there is nothing in them to play, and he didn't like that much.  You must remove all unity MACOSX records. (Leave on your computer - it needs them.)  You can also search the unit for DSStore, more small files from Mac that does not use the Sansa.

  If that doesn't fix, you could wipe and start over, but make sure that your files are backed up.

  Reset to the factory settings only changes settings such as language, in USB Mode, etc. It is not back to zero. To do this, you need to format or the other with the unit itself - settings settings/system/format - or via Windows (right click and... FAT32 format). Do not format with the Mac!

• Can put almost any new music on

  I have a Sansa e280, and I have the latest firmware on it. I even used the update firmware, and all he found was the Sansa Media Converter, I already had. I got about 500 - something songs on it and no matter how much or what kind of songs I've tried to, as only 10 more would go. I put on 253 more, and she had that 51 more songs that had it before. I even opened the MUSIC folder and it showed more than 800 songs. I had still more than 3 GB left, so this isn't a memory problem. I could only put songs in MSC mode, because I can't connect it to the MTP more. When I connect it, my laptop gives low 3 short beeps and does nothing else for the laptop or drive.  He just said 'Connected' on the drive and doesn't show anything on my laptop. Its really annoying, because I pay for the songs, and I can only listen to them when at home with my laptop. I took all the songs out of the MUSIC folder and put them all back on my laptop, then I formatted the drive. I was going to try to sync them back on with Windows Media Player tomorrow. But I doubt that it will work, because I tried it before and nothing happened. Any help anyone? I've tried everything I can think of and it starts to really piss me off.

  The trick with any problem must be methodical, lest he miss the cause of a problem.

  If there are files on the Sansa that DO NOT display in the navigation menus, there is a problem with their ID3 tags.  If the files are MP3 or WMA, the Sansa will look on them, but may not be able to index properly.

  Where the files were extracted from?  If they were stolen in a CD, and the Internet connection was not active during the extraction process (transcript), the tags will be empty, and cannot index the Sansa.  There the files listed as 'unknown' in the menus?

  Download MP3Tagor use Windows Media Player advanced tag editor to edit the tag information.  Set tags to write to ID3v2.3 ISO 8859-1 format, as the Sansa like it the best.

  With Windows Media Player open, right-click on the album or track, and the advanced Edtitor Tag will be available:

  

  I found a cool description of the tag of Advanced WiMP editor here at About.com.

  It is best to remove the troublesome files to the Sansa and retransfer repair PC files.

  If you download MP3Tag via the link above, you will find that this application is more powerful than the editor of chicken, because it allows more control over the embedded album art and ID3 tags.  I use both methods, because for a quick change, the editor of WiMP is just a click.

  Sometimes, the music database file can get damaged.  If this is the case, you can force the Sansa to build a new database from scratch by connecting in MSC mode and delete the mtable.sys file in the directory root, in the case of a device of v2, or the DATA folder in the SYSTEM folder v1 devices.  In both cases, the Sansa will rebuild required files to disconnect from the USB port.

  Oh and to quote Columbo (Peter Falk, for those who have not grown up with the LP record), "Oh and another thing...". »

  There is mention separate from the issue of the transfer of the PSG.  If the files have been transferred in MTP mode, and you look now at the Sansa msc, these files transferred to the PSG will be not visible.  This is how Microsoft has designed, with a virtual "wall" between the modes.  The Sansa can see files in both modes, but on the side of the PC of the equation is different.

  If the Sansa does not appear in MTP mode, it has to be fixed at the end of the PC.

  Bob

• Volume control keyboard shortcuts do not work when headphones are in

  What it says on the Tin.  I have Windows 7 and the keyboard shortcuts for the volume control function perfectly when I use the speakers in my laptop, but now when I switch to the headset, none of them work.  I screwed in the helmet of control panel settings, but there is nothing about keyboard shortcuts.  I tried looking for a program by the name of keyboard, but there is no such thing on my laptop.  There is only a descriptive window in the control panel that makes another diddly tell me that Yes, I have indeed a keyboard.

  Where should I look to fix this?

  I agree with your suspicion: your tech people almost certainly do not have any utility ASUS works shortcut keys.  Probably, it is not described as a 'pilot' on the site of ASUS.  If you provide the identification of the model, I'll take a look... or you can look for yourself.

  For example only (not relevant to your computer), here is the download page for the driver for a Lenovo laptop:

  http://support.Lenovo.com/en_US/downloads/default.page?

  If you select "Keyboard and mouse", you get the driver for the Synaptics touchpad:

  

  The utility of Lenovo corresponding to what you need is under "software and utility;

  

• Retrieve the iOS Notes and reminders to iCloud

  On a Mini 4 iPad running iOS 9.3.3 of in settings > iCloud...

  I disabled the reminders and Notes.  And now the reminders and Notes apps have NOTHING in them.

  I need to recover the reminders and the content of the Notes to iCloud and here, that's what I've tried so far:

  • I logged in iCloud.com, but I don't see an option for recovery of the Notes or reminders.
  • I looked in the Notes of a deleted folder app recently, but there is none.

  How can I get reminders and Notes which were in my iCloud account?

  If what you have done is turned the synchronization, turn it back on.

• There is no indication in the authors section

  I have the version 12.4 of the ITunes software and run it on a pc win10.

  My books appear in "audio books", but the "books" tab and the "authors" tab have nothing in them.

  All I see is a message telling me books appear there and a link to the iTunes store.

  All of my audio books are of audible.com. No iTunes.

  I really want to "authors" view return and he has disappeared for me since the 12 version came out.

  Any suggestions?

  Both the books and the authors sections ignore audio books and PDF files and display only iBooks. Audio books and PDF files have their separate sections, but nothing equivalent to the view of the authors. Use iTunes Feedback to tell Apple what you want.

  TT2

• How to re - activate my extensions? All I see is the option to remove

  My extensions have been disabled when resetting browser problems. What I see is the option to remove, nothing on them the reactivation. My browsers have changed as well, I want everything back that I had on December 31, 2014 or at least the reactivation of my extensions. Thank you.

  When you reset Firefox, everything has been removed and all settings
  back to normal. You will need to re - install everything to restore.

  These can not get your data back, but will help in the future.

  These modules can be a great help for the backup and restoration of Firefox

  FEBE (Firefox environment Backup Extension) {web link}
  FEBE you can quickly and easily backup your
  Extensions Firefox, history, passwords and more.
  Indeed, it is more than just backup - it will actually rebuild
  your saved individually into installable as files.
  It will also make backup of the files you choose.

  OPIE {web link}
  Import/export extension preferences

• I just started doing 2 sets of Japanese letters on each side of my Mozilla Firefox tab located at the top left of the screen

  I have my page tabs of Mozilla Firefox at the top of the screen that travelled horizontally. Without worrying how many tabs I can have open, one currently used (or wing) recently started showing Japanese lettering/words on both sides of the active tab itself. They are only on the active tab, none of the others have nothing on them except the heading search that I may have on that. As I close the tabs, the Japanese lettering follows and will remain on both sides whose tab is currently viewing.

  The extension of McAfee SiteAdvisor has been reported to cause problems with CJC (Chinese) text that appear on the tabs, so you can disable this extension.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • How to uninstall SiteAdvisor:
    http://service.McAfee.com/faqdocument.aspx?ID=TS100162

  See also these SUMO son:

  • [1034427/questions/1034427]
  • [1027393/questions/1027393]

• I open Thunderbird to find that my 3 accounts it has only the Inbox display. If I send an email may not find the box sent to save the Archives went and he

  I don't know that other files are not hidden behind the triangle. When I send an email from the troubled account, it cannot find the folder sent to save her and gives a message saying that there is no Inbox (trycreate) obviously I can't pick up my mail and it's my main account. I looked my IMAPmail folder on my c /: drive and the files seem to be there. There is nothing in them. I'd appreciate any help you would be so kind as to offer.

  Any idea that it was the problem of children? I said at the time, but I bet you just went to splash with each of them.