Satellite 1800: Watch the Sun - how to change the contrast

Similar Questions

• Satellite 1800 - 752S - the screen turns off

  Hello world.
  I have a satellite 1800 - 752S.
  Since an ew months ithas a weird problem: the screen turns off. If I press and release the button the lid on what it is, but after that turns off again quickly. OT goes off sometimes immediately, sometimes after a few minutes, or even hours. Sometimes it provides be when I run out of battery and bothers me on AC, sometimes against. It works fine, after I turn sleep or hibernation several times, and after a reboot, it bothers me. I've updated his BIOS for the lates on this site, which would not help. I guess it's a hardware problem, because it's the same problem under Linux, and I tried to install different versions of drivers and windows (not only the one of the recovery CD). Anyone have the same problem before. Any help will be appreciated.
  Thank you very much
  Roman

  Hello

  I think you're right, it's a hardware problem. But to be sure, try connecting an external monitor. If it works without problem while laptops, screen turns off, then it must be a hardware failure.

  I guess it's a problem with the FL inverter. You have to give your machine a service partner Toshiba for repair.

  Good bye

• Satellite Pro C660 - 21 d - how to change the shared memory graphic value?

  My dxdiag screen says I have almost 1700 MB of video memory, but when I try to use this memory on games these games can use 256 MB...

  I tried to change settings in the BIOS, but it does not have this setting, do not know what else could cause this problem?

  Hello

  This could be confusing, but this isn't a problem.
  Shared memory is controlled by the graphics driver and the driver affects the part of the main memory to the memory of the graphics card ONLY if its required by a running application.

  The Dxdiag shows you how much RAM could be shared and value of memory in the quizzes you shared memory which is used and who is in the game right now.

• Satellite L30 - 101 videocard memory: how to change the amount of shared memory?

  Hello. I'm using Windows Vista and I have a problem with my VGA settings. There is no option to set the amount of memory on the part that is using my video card. In the BIOS, or the Catalyst Control Center. I can't fix same refresh rate of 70 Hz screen because the pilot is automated at 60 Hz settings without editing option. How can I change this? When I try to play call of Duty even the intro movies are skippy, even after installing the latest version of Direct X. The game is relatively good running, but I think on this configuration, it should work much better.
  Here are my specs:
  CPU: Intel Celeron M 1.5 Ghz
  Video: ATI Mobility Radeon Xpress 200M up to 256 MB
  RAM: 1.5 Ghz

  Hello

  If you want to learn a little more about the refresh rate of the screen and why he s a standard on screens TFT please check this post:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19588&MessageID=71816

  It s a useful description.
  But generally, I agree with Abe. The 1.5 Ghz processor is enough to use normally. But if you want to play games like Call of Duty you will need a lot faster for laptop.
  Of course, this game run also on the unit you but you will not be able to play this game with a maximum return.

• Satellite A200 - 1 m 7: how to change the size of the partition C and D

  Look at toshiba a200 - 1 m 7... Windows Vista system. HARD drive it is divided on (c) - 75 GB and (d) - 75 GB, but for (c) - 75 GB there is a lot of... A question: how to divide - (c) - 30 GB, and 120 GB (d) - so here?

  Thank you...

  Hello

  As far as I know, you can reduce and create the single partition in Vista disk management.

  Disk management should be found in administrative tools.
  Here, you can try to reduce first the C partition and then try to add free space to the second partition or you can create a new one.

  Good luck.

• Satellite 1800-400 the gel if the device is moved

  Hello!

  My client has a problem with a 1800-400 that crashes / freezes when it move the computer. I found the same problem here and I just want to know if anyone has found the problem?
  The "lit" seeing lights... but the computer start. won´t sometimes it starts... and then suddenly hangs... sometimes, it works... But whenever I try to move the computer, it hangs / freezes...

  Any idea?

  Please write me if you have a solution to this problem...

  Best regards

  Niklas Banck
  EMAK-data Sweden
  [email protected]

  Hi emak

  I put t know exactly, how to solve this problem, but for the first time, you can try to restore your operating system on Toshiba-CD.

  Good bye

• Satellite 1800-712 - the processor can be improved?

  Hello

  I have a 1800-712 and want to upgrade the processor.

  Is this possible?
  The vehicle currently has Intel Celeron 1.1 GHZ.
  If it can be upgraded, until then I go there then?

  I was not able to find in any threat on this model.

  Thank you
  Inge

  Hello Inge

  Upgrading the CPU is not possible. The processors used in laptops are connected to the motherboard using a process called TCP (tape carrier package). It is a method of permanent connection and is used in the interest of miniaturization and heat dissipation. The only thing you can do is memory expansion. On this path of unity will be vigorously. ;-)

  If you need information about the compatible memory module, please write again.

  Good bye

• Satellite 1800-314-replacement of the CD-ROM disc

  We have an old Toshiba Satellite 1800-314 the CD-ROM drive appears to be failing - it often will not recognize a CD, or run the applications of one.

  First of all, the CD-ROM drive is not removable, so the laptop must be open. I'm familiar enough with opening, laptops, but in a hardware store or repair is not currently available, I thought I would ask if there is something to know, such as coins out of condition precedent, when I open the case?

  I would also like to take this opportunity to replace the old CD with a DVD - ROM drive. But I read that there is a problem with a possible conflict of IDE bus:
  [REPLACE CD-ROM DRIVE WITH DVD OF TOSHIBA SATELLITE 1800-314 | http://www.tomshardware.co.uk/forum/page-28372_20_0.html] (Their caps, not mine ;))

  Apart from "shorting pin 45 and 47" on the connector, there are other suggestions?

  The laptop belongs to my little girl, who will give me + hell + if it is out of use for too long, or worse, break... X (so I would like to correct it at once.

  Thanks in advance.

  Hello

  The fact is that each optical disc drive cannot be used on every laptop. you are right and there is nothing other than the compatibility issue. The assignment of pins is the same for all readers and ratings and because of this, you must use compatible discs only.

  The good thing is that Toshiba has listed 6-disc compatible optical disc that can be used with this old Satellite notebook.
  All of them are listed in the paper manuals user s. check it out.

• Satellite 1800 - what series it is?

  Hi guys

  I'm a dumb bum which series is my computer laptop satellite 1800.

  Please how do I know that what follows is ps183a-2q54pp-s/n 22104793p

  Hi graham22,

  I think that you have answered the question yourself: you have a Toshiba Satellite 1830 and ps183a-2q54pp seems to be the model number. :)

  Do you need something special for her, or why do you ask?

• Satellite 1800-700 and DVDRW DRIVE SD-R6472

  I SEE THE FORUM below OF MAY 2005:

  ================================================== =============================

  Satellite 1800-100 and SD-R6472
  Posted the: 4 May 05 07:19

  lafundacion
  Messages: 6
  Join date: 4 May 05

  Hi all.

  I have a Satellite 1800-100 and I want to change the cd-rom included with a DVD - RW unit toshiba SD-R6472 drive, but then the BIOS not reconigze, shows "IDE #1 ERROR" and deactivates the device.

  That's happened? can I mount the new unit?

  I thank very you much.
  David

  ================================================== =============================

  lafundacion
  Messages: 6
  Join date: 4 May 05
  Re: Satellite 1800-100 and SD-R6472
  Posted the: 1 June 05 09:36

  I fix my problem with sd-r6472 change c - salt for slave, with this program:

  http://www.movies-to-DVD.com/Toshiba.html

  Replaces TU51(C-sel) TR51 (Slave) firmware.
  More info in this forum (is the Czech language)
  http://www.czechcomputer.cz/disc_doc-PB6D243954406911AC1256FBC007CE118.html

  Now works perfectly with my toshiba satellite 1800-100

  Thank you.
  Bye
  ================================================== =============================

  QUESTION:

  I have a Satellite 1800-700. The SD - R6472 DVD - RW drive will be compatible with this model and the program: www.movies-to-dvd.com/toshiba.html work?

  Thank you

  Leon

  ================================================== ==============================

  Hello

  I think that if the drive works in the 1800-100, it should also work in the 1800-700. There are only a few different specifications, which has no effect on this.

  Good bye

• Satellite 1800-100 and SD-R6472

  Hi all.

  I have a Satellite 1800-100 and I want to change the cd-rom included with a DVD - RW unit toshiba SD-R6472 drive, but then the BIOS not reconigze, shows "IDE #1 ERROR" and deactivates the device.

  That's happened? can I mount the new unit?

  I thank very you much.
  David

  Hello

  did you check the master/slave setting of the new drive? There must be a PIN with a connector!

  Pete Bye

• How to increase the video memory on my Satellite 1800-254?

  A friend give me a Toshiba satellite 1800 Lalonde - 254 s for use only watch movies for my kids. With graphics memory, it has its impossible to reproduce movies, so I increased the RAM to 512 MB graphics memory is 8 MB. How I increase the graphics memory? Is it possible?

  Thank you very much

  Titanico

  (Excuse my English, I use a translator)

  This old laptop has a graphics card with shared memory. In other words, when you have more RAM inside more memory will be used for graphical operations. According to the specifications of the laptop this old notebook was shipped with 128 MB of RAM, but can be improved up to 512 MB.

  Trying to find internet modules two PC100 256 MB with part number PA3069U - 1. 25 M and update.
  That's all what you can do about it.

• Satellite A100-727: how to change the config of media buttons?

  I have a Toshiba laptop Satellite A100 727 and it was these media buttons Nice on the left side of the key board.

  They are great, but I have no idea how to change the keys.
  I had put them to launch internet and exploited with mediaplayer, but after that I had to do reinstal windows, my harddisck crashed, functions on the buttons has changed, they start up the InterVideo WinDvd.

  Does one know how I can change the functions of the buttons?
  I read something about the tools of Toshiba, but I can't find them anywere.

  TYVM in advance

  Hello

  Using TOSHIBA button controls, you can set the key features. If you have it installed you can find the TOSHIBA controls icon in the Panel.
  You can also find if you open TOSHIBA help > Optimize.

• Satellite U400 - 15G - overheating-how to change the cooling module?

  Hello

  My Satellite U400 15 G is overheating (CPU up to 70 ° c). NEITER in Google nor in the manual, I can find a statement, how to open and change the cooling module. (I'm only trying to change mine, because garranty is already gone)

  Does anyone know how to open the laptop/notebook and how to change the cooling module?

  Thanks in advance

  Post edited by: bla42

  Before you continue just a matter of discussion:
  Let's say I help you with this and damage you something or broke a plastic part, what you will do in this case?
  I mean you probably know that you can get a few small important parts as separate components.

  By the way: this description may be provided in the manual. Disassembly of the laptop is authorized personal only. When you buy a new car it is no description how to disassemble the entire engine, right?

  By the way: Jeanine's right. See this page. There are many useful tips on laptop disassembly procedure.

• On Apple Watch, how to change the time when traveling to a different country, like London or Singapore?

  For Apple Watch, can someone please show me how to change the time on my watch when I travel to another country, like London or Singapore? Thank you.

  Hello

  When traveling to a different time zone, it is not necessary to manually change the time on Apple Watch.

  After turning off the flight on each of your iPhone and Apple Watch, the time on your watch can be updated automatically to reflect the local time.

  If it is not the case, try restarting your watch:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off.

  -To reactivate: press and hold the side button until you see the Apple logo.