Satellite A300-1 g blank screen, startup problems

Similar Questions

• Satellite A300 1 5 - freeze at startup

  Hello..

  I [Satellite A300 1 G 5 | http://eu.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=EU&com.broadvis ion.session.new = Yes & PRODUCT_ID = 1055589] which came with windows Vista SP1 32-bit initially, but I decided to test windows 7 Ultimate 32 bit on my laptop for the love of performance better. However, my experience is not funny, so far, I have problems at the start of the laptop, once the Bureau instructed the icons on the icon bar takes so long to load, when that happens I can't do anything like open the start menu, or so her delay as the laptop for a long time that I give up and hold the power button shut down the laptop down... I've had this problem 3 times in January and 4 times on this month! I checked the event viewer in Control Panel of windows, I found the critical error that says the following:

  ================================================== ==================================
  The system has rebooted without judgment properly first. This error can be caused if the system unresponsive, crashed or unexpected power loss.

  Details:

  -System
  -Supplier
  [Name] Microsoft-Windows-Kernel-Power
  [Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}

  Event ID 41

  Version 2

  Level 1

  Task 63

  Opcode 0

  Keywords 0 x 8000000000000002

  -TimeCreated

  [SystemTime] 2010-02 - 18 T 08: 36:32.232818800Z

  EventRecordID 23051

  Correlation

  -Execution

  [ProcessID] 4
  [ThreadID] 8

  Channel system

  Radwan-computer laptop

  -Security

  [User name] S-1-5-18

  -EventData

  BugcheckCode 0
  BugcheckParameter1 0x0
  BugcheckParameter2 0x0
  BugcheckParameter3 0x0
  BugcheckParameter4 0x0
  Fake SleepInProgress
  PowerButtonTimestamp 129109557149197177
  ================================================== ========================

  one last thing, my laptop is often BSoD after the awakening of fashion 'sleep'... and it restarts automatically so I can't collect a lot of information... but the windows solutions Center says something about the driver ATI... but I have the driver from toshiba Web site, do not know if there is a way to fix this problem as well.

  looking for postponed for your help...

  Thank you...

  I have very good experiences with Satellite A300 and Win7 installation. No problem at all.
  I can see on the download page of Toshiba that your model of laptop is fully supported for Win7 and everything you need to do is install all the stuff of Toshiba in order of good facilities.

  My order of facilities is:
  -Win7 Home Premium (new installation)
  -chipset driver
  -Storage Manager
  -display driver
  -driver sound
  -modem driver
  -utility supervisor
  -infrared
  -patches
  -configfree
  -VAP
  Hardware - toshiba
  Control - HDMI
  -WLAN driver

  Everything works well but lacks some drivers

  Added Vista tips:
  Toshiba - help - working properly
  -Card reader - installed correctly
  -Webcam driver for A500 - tested with Skype - works correctly.
  Driver - Synaptics

  I don't really know what you're doing wrong. Maybe some background process block put into regular service.
  I recommend to try again and make easy step by step following my list and let me know what stage you will be faced with the issue described.

• Satellite A300 starts but the screen is blank

  My laptop Satellite A300 broke down after opening a zip file, I think it was called flash microsoft.

  The laptop starts but the screen is blank.

  Any ideas?

  You see anything on the screen when you start button / stop?
  See Toshiba welcome screen?

• Satellite A300-16W - now blue screen on system

  I have Satellite A300-16W 21 months and so far my cooler was also changed HDD, screen was dead (had to be changed to), was to motherboard, then I had the problem with the battery charging and which had to be fixed too. Now, the whole system cracked, blue etc screen. So far, this computer was nearly 160 days for services and I'm really disappointed with toshiba, because this is the worst computer I've ever had. I lost very important data twice because this computer.

  What to do now? I think it would be fair for toshiba to give me a computer of the same price I paid for this one because it is obvious that it has and it will be a lot of major problems and failures.

  Hello

  I can understand you, Milosh. It seems that you don t luck with your Satellite A300 but I think that if an individual case. I've ever read in the forum about these problems on the Satellite A300 and friend of me has also the same laptop but without any problem.

  You know that nobody is perfect and laptop use a lot of electrical parts and no one can say how long they life.

  If you are not satisfied, you can buy a laptop. That is your choice but don t forget these things can happen with other laptops too. Of course that's not normal, but theoretically it can happen with other mobile / manufactured too.

  About your important data, I can only say, make a backup from time to time!
  Which is the most important thing you need to do. Use a good backup software Acronis True Image. Installation and configuration of such tools to take just a few minutes, but if you use them, you are on the safe side! :)

• Satellite A300-1 OC - blue screen on all OS

  Hello!

  I have a problem in my laptop Toshiba Satellite A300-1 OC.
  When the computer is often an error blue screen 8.

  All the drivers are installed, the latest version of the BIOS. After trying all the operating systems. XP, Vista, Seven. The error could not. I read on the forums that it could be faulty RAM. Help please, what I would do in this situation. Thanks in advance.

  Hi Rosicky,

  I put t know why you get this BSOD but 8th is not the error code. Maybe you should check this yet what is displayed exactly when you get this.

  If you think that your laptop is overheating you can clean using compressed air stream. This could blow the dust of fans cooling and, therefore, it of necessary to disassemble the laptop. You can get it from every computer store I think.

  Finally, and especially if you assume it s the RAM you can use Memtest86. This tool can test the RAM for bad sectors.
  Check it!

• Satellite A300-2 TB-Ethernet network card problem

  Hi all

  I have a laptop Satellite A300-2 CT with Windows XP SP3 for a year. There is a problem in the network ethernet card, I think.

  If I connect my computer to a wireless network, all right. However, if I connect the computer to a wired network via the ethernet card, problems begin.

  A little later after the connection. 'something' is happening and my windows theme changes to "classic", plus none of the applications that uses the beginning of the soundcard NOT working. In addition, the system slows down a lot for all the one or two minutes. When I check running applications during the"slow", I see that deferred procedure calls takes a lot of time processor.

  Problem does not end with this, after that I disconnect the ethernet connection and restart my computer, the application of the wireless (Atheros) adapter takes control of wireless connections, so I can not connect wireless networks I wanted. I have to restart the computer to resolve this problem.

  I've updated the network ethernet card driver, nothing changes.

  In conclusion, I think the network ethernet card has a problem and maybe it is in conflict with other hardware (such as the sound card).

  Y at - it suggestions to solve this problem?

  Thank you.

  Hi alp37,

  I have never heard of this issue, and I think all you can do is update the LAN and the audio driver. The two you can download from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  If it doesn t work I think I think it is a software problem I would recommend reinstalling Windows Toshiba recovery disc. Who can restore the factory settings, and then you can test it again.

• Satellite A300 - replacement for the keyboard button problem

  Satellite A300 broken my number key 3.
  Easy to fix but still Toshiba have charged me £43 to replace it with a new full keyboard.
  It is less than 6 months old and still under warranty.

  What an absolute joke, I wouldn't have another toshiba again.

  > What an absolute joke, I wouldn't have another Toshiba again.
  Well, it is your personal opinion but I agree.

  However, if you understand something about laptops so you'd know that the single button can not be replaced.
  Only the CAP can be replaced but not the button on the keyboard, and thus the entire keyboard needs to be replaced!

  In addition, the guarantee only covers hardware problems that are not caused by laptop user I n don't know why the button on your keyboard is broken (maybe you was your fault) but I think that you have contacted the ASP in your country and talked to the technician then why you didn't explain that it wasn't your fault?

  In any case, the case should be clear now

• Satellite C70 - A - 16 L - screen resolution problem

  Hello

  I recently had a screen resolution problem with my laptop (C70 - A - 16 L).
  The max screen resolution which is imparted to me is 1366 x 768, whereas before I think he used 1600 x 900.

  I tried the latest drivers, Bios, etc. and have also restored the operating system to a previous backup, as well as a new installation.
  I also tried to roll back to Windows 7 (with proper drivers). They all offer the same problem.

  This new maximum resolution display correctly - as if the LCD does not deal with the timings of 1366 x 768.
  I believe that the Panel is OK and the problem he reports the EDID information properly - to force windows to use the new resolution.

  Is there a download monitor.inf file that can be used to bypass the EDID reported by the Panel?

  Kind regards

  Antwist.

  If the right to display drver is usually installed everything should be OK.
  Have you installed Intel driver Toshiba download page 9.17.10.3062 version?

• Satellite A100 (PSAA9): Win7 + setting screen brightness problem

  Hello

  I installed Windows 7 64 bit on my toshiba A100 (psaa9) machine and I cannot change the screen brightness more.

  It's always a maximum brightness. FN key doesn't work, and neigther Control Panel I can change the nvidia manually through the brightness. NVIDIA driver is 7.15.11.7967, which is installed automatically with windows.

  In a similar http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=182780 wire
  I have read suggestions on value-added package to install, but there is no package like that for my model.

  How can I solve my problem?
  Thank you

  Hello

  You must install VAP and Support of Flash Card Utility for the FN keys works!
  Installation of VFR will not help you if you should not install Flash memory card Support utility.

  As far as I know, these two tools are not phone specific, so you can choose the VAP and the published Flash card for example utility for Satellite L500!

  I did it on my laptop and it worked fine!

• Satellite A300-15 has - black screen preview using the builtin camera

  I just bought a new computer laptop Toshiba Satellite, but built in camera is not working well.
  Whenever I open the camera assistant software, it shows me a black preview, but when I take a snapshot he takes the picture...

  I tried with msn and Skype, but it shows the black screen.
  I searched Toshiba forums and all the troubleshooting guides and impossible to find a solution to my problem.

  Help, please?

  Try to reinstall the webcam software.
  This should help you.

  Latest software for webcam can be downloaded from the page of European driver of Toshiba.

  Then remove the preinstalled software, restart the laptop and install the downloaded software.

  Good luck

• Satellite A300 crashes on login screen - "prepare your system.

  I have a computer which is a Statelite A300.
  I recently formatted my computer because he kept frezzing.

  I reinstalled using the toshiba recovery patition.
  Once I start the computer I have login and then it screen comes up saying.
  + Preparation of your system. This may take a few minutes. The system can automatically restart... Please wait. +

  So I wait and wait and wait. nothing happenes just restarts.
  Also, I am about to format using recovery dics, some time ago I created in safe mode.

  Anyone got advice. Please do hesitake questions.

  Hello

  Have you tried to repeat this procedure of recovery using the recovery of HARD drive partition?
  In the contrary case that and check if it helps.

  From my own experience that anything can happens during the recovery procedure and assign installation of the OS.

  Some time ago I tried this and my phone hung somewhere during the installation
  I just repeated this procedure and it worked

  Maybe you should try this new

  Good luck

• Satellite A300-125 and drivers for Vista problem

  Hello

  I'm new user with toshiba so I made mistake. Yesterday I reinstall my windows vista, but before that I forgot to make a backup, so now I own windows but there is not drivers for some think. for example, what program I need to use the multimedia keys on my keyboard?

  Can someone show me that drivers should I install now to work properly on my computer?

  Thank you...

  Hello

  To avoid errors, Toshiba has created a little reminder that will appear on the screen very often and I don't really understand why you didn t read this and take it seriously.
  Anyway, if you have installed has Vista visit the Toshiba support under http://eu.computers.toshiba-europe.com page > support & downloads. You will find everything you need. Just choose your model of laptop.

  Before starting installation, check to see if it has listed document Instructions of facilities. If so, please check and install all the stuff following this order of installations.

  Good bye

• Satellite Pro 6100: IDE ERROR #0 startup problem

  When I turn on the computer the Toshiba red symbol is displayed as usual. At this point, I have input a password which is accepted. However, a reading "IDE ERROR #0" error message appears followed by

  Intel Boot Agent Version 4.0.18
  Copyright... Intel Corp.
  PXE - E61: Media test failure, check cable of
  PXE - MOF: Exit Intel PXE ROM
  Insert system disk in drive
  Press a when you are ready.

  I inserted the version of bios and all drivers disc that came with the computer. Nothing happens, and the error message is repeated. I have been told by friends trying to boot in safe mode, but am unable to find it in the bios. It has also been said to try reinstalling windows.
  I'm not sure what to do and would be very happy for any advice on the subject.

  Hello

  Usually the HARD drive is set to IDE #0.
  The PXE error if the laptop tries to boot from the local network, but the cable is not connected or is not possible for the start of LAN.

  In my opinion, there is something wrong with the HARD drive or the BIOS does not correctly recognize HARD drive. I recommend you to check the pins on the HARD drive. In addition, you must change the boot order in the BIOS.

• Satellite A300 - system still works, but the screen is blank

  Hello

  I was downloading an update of tempro toshiba (synco or something in that sense) for my laptop Satellite A300 and the frozen screen. I pressed the power button for 5-10 seconds until it is turned off. When I turned it the system seemed to work but the screen is completely black.

  I tried to remove the battery, and fn + F5 but the screen still won't turn on.

  Any help or advice would be appreciated.

  Rob.

  Hello

  It happened because of the updated BIOS, or during the common software update?
  In case it was an update of the BIOS I recommend contact the ASP in your country, because it seems that the ROM module must be flashed again.

  If it happened during a common software update, so I advise to remove the battery and the AC adapter and wait an hour.
  Then reconnect the two parts and check to see if you could power the laptop properly!

  Check it out!

• Hypernating Ubuntu 8.1 + suspend problems on satellite A300-15 has

  I got a Satelite A300-15A and I installed the top Ubuntu operating system. But every time that I put it to suspend or hypernate, it starts again.
  When I press the power button I get a black screen with glitch (green stripes on top)

  Any ideas on how to fix it?

  Hello

  It is not easy to offer a solution to this. Satellite A300 is not supported with this problem and Linux, you're on your own.
  Check some Ubuntu forum. You're more likely to get good advice there.

  Otherwise, if Ubuntu works well you should be happy about it. This little problem shouldn't be that important to you.