Satellite A300 (PSAGOE) - blinking of the screen and it's slow

Similar Questions

• Satellite M200 (PSMC0L) - Artifacts on the screen and crashes

  The problem that when the cold of the laptop, it overlooks all the objects on the screen and hangs. When the laptop going to warm up after 2-3 minutes restart or almost 5 minutes stay on BACK loading mode normally occurs. After loading Windows XP perform all tests, benchmarks fine
  If I try to cool down the laptop once it is warm after power again - the process of loading with objects repeats.

  the video with objects of cool start here:
  http://rapidshare.de/files/49056924/Toshiba_Satellite_M200_PMSC0L_BIOS_fw_ver_5_10.avi .html
  or
  http://DepositFiles.com/files/qk3j0ab76
  or
  http://uploadbox.com/files/c37cd63794

  A few weeks ago, I have a problem with Dual core boot and the frequency of the dynamic processor - laptop boots up to 6 minutes on WinXP clean and 6 hours to install
  WinXP on own laptop.
  When ONLY a core value and a constant frequency in BIOS - laptop runs well, but on 1 core 1.73 Ghz dual-core CPU
  But for a week, the problem disappeared.

  If there are thoughts on this occasion.
  Thank you.

  Hi inf24,

  It is difficult to say what is causing this problem, but such objects on the screen are normally associated with defective graphics card or wrong display drivers.
  I initially update the display driver, but only use the driver from Toshiba. Other drivers are not pre-tested and from my own experience, I can say that they could cause problems.
  Check this box!

  Regarding your CPU question I have no idea but if everything works at the moment it of pretty well! :)

• Satellite A300 - grayish colors on the screen

  Where to play games on my Satellite A300 (PSAGCA-02W010) and looking at photos of all colors seem a bit dull and grayish. When I called they said them it could be "limits the display" and I could have looked but I would be charged $120 if it was because of the limitations, I was wondering if anyone else has had similar problems with screens.

  It looks like my companion of hewlett packard LCD display which is very old.

  Any advice would be helpful!

  I have Satellite A300 and colors on the display are clear and bright.
  What games do you play? Something in the dark?
  Have you noticed the same thing if you use Vista OS for the daily work as Web-based applications or in the office?

• Satellite A300-1EC cannot load the OS and restart just /shuts down

  Can you help me with my problem of A300 PSAG0Elaptop.

  This is the case:
  before that I can still use my laptop normally without plugging the power cord but when plug the source ca the unit restarts all of a sudden. I charge the battery only when the unit is off. And now the worst case gets when I installed the recovery disk hoping would solve the problem. I can no longer load the operating system; It's just loading then it does not load and suddenly shuts down and sometimes simply frozen. I have not tried the safe mode, mode ahci, system recovery, system repair, and stil no chance.
  I brought this already at the center of ASP service and they demanded almost 1 unit brand new laptop for repair of my laptop is not advisable to send them to repair.
  I doubt that my system bios is not compatible with my vista Home premium OS, or perhaps my wife update of the bios that is not compatible in windows update. My current bios I checked is 1.4

  Given that I have no option instead of junking my laptop, I want to update or back to the original settings of the bios that can help to repair my device.
  Can you help me on how to update or revert to the original my system bios? As I can't access the windows can you teach me step by step using the usb port of my camera on system bios update? Or do you have any suggestions?

  Need help bad
  Here are the specs of my unit
  A300-1EC
  P / N:PSAG0E - 02J025AR
  Windows vista Home premium core 2 duo T5750

  Hey Buddy,

  First of all, the BIOS can only be updated Windows System. There is no other version that you can download on the site Web of Toshiba.

  But I doubt that this problem is caused by the BIOS. It s I knew not that it is possible to change certain values which make impossible Windows installation. With other words BIOS is secure and with all the settings, it should be possible to install Windows.
  An alternative you can press F9 in BIOS to load the default settings. That would be the best option.

  But according to your assignment, if Windows installation of recovery disc doesn t work and you are not able to charge the battery while the laptop is turned on it seems to be a hardware malfunction because seriously it has nothing to do with the software.

  So either come you into contact with the ASP to get the repaired device or you can repair yourself with original spare parts with parts ASP or second-hand on eBay or similar platforms.
  Of course, you can buy a new laptop: in case the motherboard would be defective because the motherboard is very expensive spare part, it would be the best choice in my opinion.

• Satellite U840T - mouse disappears on the right of the screen and down

  I have a problem with my Satellite U840T screen

  The mouse disappears on the right of the screen and the background in the black bars at the top and then the left side of the mouse cannot go to bars.

  In the display settings, everything is good, I think.

  Thank you for your help

  Hello

  I confused m.
  Your question isn't described very well.

  What do you mean exactly by: mouse disappears on the right of the screen and the background in the black bars at the top
  Do you mean the touchpad or the cursor?
  The laptop's touchpad supports the (multi-touch) gesture control feature, and this feature could be configured in the settings of the touchpad:
  + Control Panel-> mouse-> device-> settings settings tab.

  You will also find the option called shots of edge which opens the charms, app Switcher bar and toolbar Application simply by moving your finger between the edge of the touchpad to the centre.

  In this case the cursor is not visible.

• Satellite A50: Need the detailed specifications of the screen and DVD - RW

  Hello

  One of my friends had their murdered A50.
  It suffered a blow hard with blunt when closed, which broke the screen and totally destroyed the hard drive.

  This is probably beyond economic repair. However, I had a go at laptops before repair (mainly the Apple iBook - these have tiny parts and are quite difficult to maintain - the Toshiba looks easy).

  I have two questions-

  First, I removed the HARD drive and hooked it to an external monitor. The wireless appears to work, the charges of the battery and the system boots to the BIOS. I took the hard drive and it is writing off the coast, the data has been saved.

  However, I can't get the DVD player to eject. I opened it with a paper clip, and it opens and closes fine manually. There don't seem to be getting no power anyway. Is this normal? It does not seem to have taken no external damage, it is easy to take the coverage of the case and take a look at the connectors.

  Second, the screen is broken (just the glass, the rest of the top of the page looks very well). Anyone know what is the model of screen used in the A50? In addition, a source for this bit second hand would be great - pointers? (if this is allowed in the forum?)

  See you soon,.
  Josh

  [Edited by: admin on 21 January 06 11:04]

  Hello

  In my opinion the best way to order parts is to contact Toshiba service partner because it has detailed information on compatible parts. In addition, sometimes laptops come with different screens and if you want to be 100% sure what part is supported so ask the ASP.
  However I found this site with a screen for an A50:
  http://www.screentekinc.com/Toshiba__Satellite__A50--14.1_lcd_screen--(1024_x_768) _XGA.html

  Well well about by car: in my opinion, the drive is broken and it should also be replaced.

  Good bye

• Satellite P - grains of dust between the screen and before

  Hello.

  After a few weeks of suddenly, I have a speck of dust between the screen and front end.
  How can he get there and so I have to send in the laptop to the service?

  Greetings from the Germany and sorry for my bad English.

  Hello

  I think that it of difficult to say something about it, but I think that in this case, you can't do anything. The only chance is in touch with an authorized service provider because technicians can disassemble the laptop and check this box. If you disassemble the notebook you will lose you warranty so I n t this

  If you don't know where is the nearest ASP, you can search here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Simply contact the technicians. You will see that it s interesting to talk with them a little and they are friendly. ;)

• U100: Videos simultaneously on the screen and external beamer?

  Hello booklet users,.

  I don't have such a beautiful unit yet, but I think to get a. I guess I won't have too many problems with the screen and a small keyboard that I use a MDA Pro and I am very satisfied with the even smaller keyboard.

  But before you buy a Libretto U100 I really want to know if the book is able to show a video, which is included in a Power-Point presentation on the screen of the booklet as well as on a projector at the same time. Because this is not the case with my real Satellite phone, where I can run Power-Point presentations on both devices, but as soon as I start a video in the presentation, that it will only appear on my screen of Satellite.

  Thanks for sharing your experience,

  Walter

  Hello

  Usually on the satellite units, it should be possible to change the display devices with the FN + F5 key combination. So you can change the output to extern monitor/Beamer, TV, extended desktop display or you can clone display (laptop + monitor or laptop + TV).
  I put t know if you tried but check these possibilities.

  AFAIK the Libretto U100 also supports this utility and it should be possible to change the extended or video projector monitor output.

  Good bye

• Satellite C50 - B - lines on the screen

  Hi all

  My son has bought a Satellite C50-B-153 in December last year and used as a personal laptop. One morning last week, he went to use it and worsened the Toshiba start screen met with lines, lines and more white, and then it closes.

  I tried all the 'F' with the option '0' options with no luck, read about the command causing problems so I connected an external rom to boot DVD and tried to load the recovery disc. I left him and went away for a short time, when I came back, I clicked the mouse button and the screen with the opening screen of windows, with lines session more and then and then it restarted again.

  I checked the internal cables and the cables of the screen and they are all attached properly the only thing I did not just replace the CMOS battery but don't know if it would be useful or not?

  Any help would be greatly appreciated because he is lost without her, and so I don't like it with my computer laptop haha!

  Thanks in advance,
  Emma.

  If the lines are visible all the time, you should check if they are visible on the external monitor or TV. If this is not the case, the problem is probably defective.

• Re: Satellite A300-243 - updated after the BIOS, it did not work

  Dear members...

  Good day...

  I have a problem with Toshiba Satellite A300-243, I installed the Bios after you download from Toshiba Web site, and when it's over, he restarted the machine and did not work, just turned on.

  So if any body can help me to solve this problem, I'm happy.

  Thank you...

  Hello

  It looks like that the BIOS update has no...

  What can you do now?
  Yourself you can do nothing. The only change is the authorized service provider. Technicians can try to reflash the ROM module

  Sorry mate, but in this case you need professional help.

• Presenter PowerPoint on Mac mini mode displayed on the screen and the projector when using HDMI splitter

  We have a Mac mini connected to a screen and a projector via HDMI using a HDMI splitter.

  It works fine for most applications, but during presentations PowerPoint, presenter is displayed on the monitor and the projector.

  When I disconnected the mini Mac's HDMI cable and put it in a MacBook, the presenter appeared on the MacBook screen (as it should) and only the slide appears on the screen and on the projection screen.

  Of course if we have to use the MacBook for presentations instead of the Mac mini, you would need to have seen the presenter on both the screen and on the screen of the MacBook.

  In the Mac mini display preferences there is no button to "Gather Windows" when the Mac mini is attached to the screen and the projector via HDMI splitter is a tab "setting."

  But these two things appear on the MacBook when it is connected.

  Any help would be greatly appreciated.

  Thank you!

  Mike

  

  

  I'm confused. When you use a video separator the same screen will appear on the two monitors connected to the separator. This is how works a separator

• The right edge is off the screen and I can't adjust the width.

  Somehow, I have the column on the right side of the screen and now it can not reach to reduce the column width, so I can see the part of the message.

  On the toolbar > Options (mouse hover on a menu appears, do not click on options) > Presentation > vertical display

• A Message in a rectangular box "Messages Agent wants to use the 'Local products' kenchain. appearing on the screen and ask for Keychain password password.  This started after I changed the password of Apple resulting for the purchase of a new iPhone

  A Message in the box 1. "Message agent wants to use the 'Local products' kenchain. "is appearing on the screen and ask for Keychain password password.  This started after I changed the password of Apple resulting for the purchase of a new iPhone.

  My iPhone 5 has been damaged and the screen was not visible.  As a result, I couldn't open the iPhone.  I bought 5 s iPhone and when I got to connect with the iCloud

  I remember the answers to security questions.   The seller must change the password and enter new answers to security questions, I did.  This happened in Bangalore.  When I'm home in Ernakulam, Kochi (India), where I has the Air of Mac, Ipad and my wife had another iPhone and laptop computer Dell, these problems began to come up on the screen and blocks the screen.

  Four Messages are appearing: the first is on the top.

  Other messages are:

  2. ' cloudd wants to use the kenchain 'local products '. '

  appearing on the screen and ask for Keychain password password.

  3. ' com.apple.iCloudHelper.xpc wants to use the kenchain 'local products '. appearing on the screen and ask for Keychain password password.

  4. ' cloudpaired wants to use the kenchain 'local products '. ' is appearing on the screen and ask for Keychain password password.

  It of an upheaval and please suggest how to solve this problem

  Hello remy!

  I see that you are either prompted by iCloud Keychain with various alert messages.  I know it's important to have iCloud Keychain works correctly and I am pleased to offer you an article that should help you.  Please follow the instructions in the following support article:

  If your Mac keeps asking for the password in the keychain

  Thank you for using communities of Apple Support.

  See you soon!

• Hospitality at Thunderbird takes up half of the screen, and I can't remove it.

  Since this review popped up, it takes the bottom of the screen, and I can't find a way to remove it. Sometimes when I open Thunderbird, greeting isn't here, but one of my regular e-mails takes up the bottom half of the screen instead. I want to return to a list of emails and read only those that I click on.

  Disable the message pane. F8 it will switch on and outside.

  FYI: whenever you want to change the display of the layout of your screen, look in the VIEW menu. All these options are there.

• Yahoo's page cannot be opened properly, the data are clustered on the left side of the screen and do not work

  When opening Firefox, browser my Yahoo homepage is loading properly. It opens but data on the Yahoo page are all the cloged on the left side of the screen and do not see the data nor the icons of work, and I can not access any information or sites, do not respond or work the yahoo page...

  It takes place before, but within hours or the next day, it opens correctly withouth do nothing, but now does not work since yesterday.

  I have window XP

  Hello ajdf9, many site problems can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.