Satellite A300D - 205 how to change from 32-bit to 64-bit

Similar Questions

• Satellite L750 PSK1WA: Can I change from 32-bit to 64-bit after initial installation?

  I chose 32-bit during my first installation after buying my L750 PSK1WA-03C00R with i5 2410 M CPU.
  Can I change to 64 bit so that I can access the 8 GB of RAM that has been installed.

  Thank you.

  Hhmmm I think that this should be possible. You have to start the process of recovery once more
  Check this Toshiba HowTo: how to do a system recovery
  http://www.MyToshiba.com.au/support/items/FAQ/71

  1 press and hold the power button for ten (10) seconds to turn off your device.
  2 press and hold the 0 (zero) on the top of the keyboard (not the zero on the numeric keypad key) and at the same time, press the button power once to turn on your laptop.
  3. when the Toshiba screen appears; release the 0 key.
  * 4. If you are prompted to select 32-bit or 64-bit operating system; Click on suivant.*
  5. When you are prompted by the warning screen; Click Yes to continue the system recovery.
  6. Select recovery of factory default software; Click Next.
  7. Select Restore to out-of-box state. Click Next again.
  8 Please read and acknowledge this last warning screen
  9. click on next to start Recovery

  This could also be useful if you're wondering why you didn't receive the disc:
  http://www.MyToshiba.co.nz/support/items/FAQ/69

• How to change from 32-bit to 64-bit?

  Original title: 32 bits 64 bits, exactly what they are refuring to

  System have32bit what should I do to make it 64-bit?

  Hello

  You can not 'do' your 32-bit to 64-bit

  You have to get a 64 bit Vista operating system disk and do a clean install, which erases the hard drive clean in the process.

  If you have a contact for OEM Vista Operating System (Dell, HP, Acer, etc.) preinstalled manufacturer and ask is they provide you with a record of 64-bit and ask them if your computer will even run the 64-bit operating system.

  If you have a Vista of detail except ultimate license, which included records of 32 and 64 bit, you will need to borrow a record of 64-bit as Microsoft is supplying more 64-bit Media for Vista retail licenses.

  And read this information about 32-bit and 64-bit operating systems.

  "32-bit and 64-bit Windows: frequently asked questions.

  http://Windows.Microsoft.com/en-CA/Windows-Vista/32-bit-and-64-bit-Windows-frequently-asked-questions

  "Differences and advantages between 32-bit (x 86) VS (x 64) 64 - bit Windows Vista"

  http://www.mydigitallife.info/differences-and-advantages-between-32-bit-x86-vs-64-bit-x64-Windows-Vista/

  See you soon.

• Satellite A300D-205 - Fn buttons do not work with Win XP

  Hi all!

  I installed windows XP for my toshiba Satellite A300D-205,

  I found compatible drivers and all devices work properly except multimedia functions Fn and sensor-buttons next to the main keyboard!

  I tried to install Toshiba Value Package added, but it does not work in win XP...

  Do you have ideas of how make this stuff work? Y at - it Toshiba VAP for XP?

  All responses appreciated. Thank you.

  Kind regards...

  Post edited by: freackh

  Look, man

  The VAP (value added package) was designed for Win Vista and Win 7 ONLY!
  There is no PPV for Win XP!

  Satellite A300D-205 belongs to the PSAHCE but the Toshiba series European driver page does not provide the Win XP drivers for this series! There are only Vista or Win 7 drivers.

  To be honest, Win XP is oldie was a King in the past, but the King living death the King (Win 7)

  I doubt that you will get Win XP drivers created for this series and so I doubt that you will get to the buttons FN.
  But of course, you can try to install common Module, Hotkey Utility, utility Hotkey to published display to other devices perhaps series (A300, A200, etc.), you could get the tools running that would allow the FN keys

• Satellite A300D-205 - tools for the multimedia keys

  Hi guys.

  I installed windows XP for my Toshiba Satellite A300D-205 and all devices to work perfect except the media touch buttons. It works with Vista, but it does not work with XP.

  Can you give me some ideas (or tools) how to operate?

  Thank you.

  Hello

  Are you kidding me? You can download all drivers & tools on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  As far as I know that you have need of the common Modules, Hotkey Utility, Touchpad on / off and utility for multimedia and the FN keys.

  But I m wondering that you want to use Windows XP. It's the past, and now the best OS is Windows 7. Have you tested it yet?

• How to change the graphics BIT DEPTH in the casting director? 32-bit to 8-bit?

  How to change the depth of the image of Member on a 32-bit to 8-bit cast?

  Imagine that you have an image in the castmember, named "yourface.
  You have checked the depth in the message box:
  put member("yourface").depth
  -32

  EASY and SUCCESSFUL but:

  Changing from 32-bit to 8-bit BY DIRECTOR

  Edit > convert to 8-bit bitmap > framing
  You will see the image easily changed to 8-bit image.
  BUT IT'S NOT SCRIPTING

  SCRIPTS:

  Member ("yourface"). Depth = 8
  Error! You cannot set this property!
  
  I tried to do a blank image to 8 bits, then copypixel 32-bit image in one, but my face become RED and GREEN.

  How to make the script and have the GOOD RESULT YOU modify > convert to 8-bit bitmap > dithering? Thank you for your help.
  

  Copy of pixels has the property of dithering. Here are a few notes on this topic:

  Using the option to dither with copypixels.

  The copypixels command can accept a property of #Dither option. The two valid values for this property that I know are 1215 and 1969.

  anImage.copyPixels (img, aRect, aRect, [#dither: 1215])

  anImage.copyPixels (img, aRect, aRect, [#dither: 1969])

• Change from 16 bits to 32 bits

  How to change to 16-bit 32-bit photos

  Hello

  That mean ranging from 32-bit/16-bit/channel as channel under Image > Mode?

• Satellite C660 - how do I change from 32-bit to 64-bit operating system?

  Can someone tell me please how to move from a 32-bit to a 64-bit for my Toshiba Satellite C660 Notebook operating system?

  No CD came with my laptop so I can't restore.
  I installed the 32 bit for the setting by mistake and now want to change.
  Thanks in advance

  Can you please tell us model right for laptop (C660-xxx)?
  You have created recovery DVD Toshiba s advice how to do this?
  If so try to launch the installation of recovery and check if the option to choose between 32-bit and 64-bit shown on the screen.

• Re: Satellite C660 - 17K - how to change the text in the language?

  How do I change from Swedish to Norwegian text, tried most of the dashboard without success. All text information displayed in Swedish. I have a new satellite C660 17 K

  Hey,.

  You want to change the entire language of Windows or what?

  Well, this is not possible if you n t have Windows 7 Enterprise or ultimate edition. You can change the language of the lower Windows versions of t. In this case, you will need to buy Windows 7 Home Premium in another language for example and reinstall.

• Satellite A100-727: how to change the config of media buttons?

  I have a Toshiba laptop Satellite A100 727 and it was these media buttons Nice on the left side of the key board.

  They are great, but I have no idea how to change the keys.
  I had put them to launch internet and exploited with mediaplayer, but after that I had to do reinstal windows, my harddisck crashed, functions on the buttons has changed, they start up the InterVideo WinDvd.

  Does one know how I can change the functions of the buttons?
  I read something about the tools of Toshiba, but I can't find them anywere.

  TYVM in advance

  Hello

  Using TOSHIBA button controls, you can set the key features. If you have it installed you can find the TOSHIBA controls icon in the Panel.
  You can also find if you open TOSHIBA help > Optimize.

• Satellite M40-185 - how to boot from USB?

  I have a Toshiba Satellite M40-185

  I could not a off of usb because the two Mafany usb boot option

  Options for the device
  1. HARD DRIVE
  2 CD-DVD
  3 FDD
  4 LAN

  How to boot from usb?

  Hi esc.

  I think that you have answered the question yourself because you've posted all the startup options that are available and there is no option to boot USB on this laptop.

  All you can do is to install the latest BIOS, but as far as I know Satellite M40 can t boot from USB!

• Satellite L30-134: how to change shared video memory?

  Hello

  I have a laptop L30-134 with 512 MB of ram and 64 MB of video memory shared.

  I can't change the virtual memory from 64 MB to 128 MB.
  I reed some messages in this forum but I have no option in the Panel as "FrameBuffer" and the bios hase no option for the video display adapter, I tried to install the latest ati driver but ich time I get an error is not configuration / compatibil card whit say out.

  How I change my card adapter video shared memory size?

  Thank you.
  PS: sory for my bad English... :)

  Hello

  Using the latest display driver (you can download it at toshiba), then you will have the option of frame buffer memory. The initially installed driver doesn't have this option. You will be able to use the memory of 128 MB for vga. If you put your L30 512 MB, you can use 256 MB of video memory. But I found no differences in the games between 128 MB and 256 MB.

  Best regards
  Abel

• Satellite C50-A230 - how to change the settings of the BIOS to dual boot

  Hello

  Toshiba c50-a230 (PSCG8V), 32-bit win10

  then a classic question... I want to install ubuntu alongside with windows 10 and im stuck in the first State

  So how do you go into the bios settings and configuration options of dualboot?

  Thank you.

  I think first of all you need to create a Toshiba recovery media before you upgrade or install other systems.
  The recovery disc can be created using the preinstalled software "Toshiba Recovery creator environment."

  So after this environment has been created, you could improve the system of Windows 10.
  After that, you will need to create a partition for installing Linux.

  I could recommend a freeware program called Gparted.
  You can create a bootable USB key containing Gparted to create an additional partition.

  Note: in the BIOS of the changes must be done in order to start from external sources (DVD or USB). Secure boot must be disabled and in the event that the new system will not support UEFI, the boot mode must be changed (from UEFI to CSM)

  But as far as I know Ubuntu supports UEFI, it should be possible to install this OS as part of UEFI mode.

• Satellite L770 Pro: How to change the browser shortcut internet touchpad?

  Hello

  I'm fighting to change the shortcut of touchpad "with three fingers tap" Google Chrome Firefox - I have changed before leaving Explorer for Chrome, but now don't remember how and don't can't find all the information on how to change this setting - someone has any ideas please?

  Thank you.

  I don t know if I understood you right but open please properties for Synaptics click on cushion and there you can find options for three fingers to press, three fingers touch.

  When you turn on three fingers press you can select the program to be launched.

• Re: Satellite P750 - changing from 32 bit to 64 bit

  I just bought a Satellite P750 (64 bit compatible) and did the quick start upward following the instructions that says I'll get a chance to say if I want 32 or 64-bit. Only, it didn't. Have you regions, time, etc. and then started upward. But in 32 mode. Can I uninstall the version of 32 ome and reinstall or change to 64-bit.

  Can anone help?

  PS am new long-term tragic Windows 7 XP.

  Hello

  Can you please tell us what P750 (P750-xxx) do you have exactly? I just want to check tender specifications on the Toshiba support page s.

  I have older P500 and I got it with 64 bit only OS. So I don't know if the most recent model is offered with the OS 32 and 64 bits. For example, I saw on the page s Toshiba P750-100 comes with 64-bit only.

  Can you please check again the version of Win7 is installed (Control Panel > system).
  Somehow I doubt that you have a 32 bit OS.