Satellite A350 - difference between these tools of Toshiba

Similar Questions

• Satellite L30 - difference between these models?

  Hi all

  Not really a question of technology as such, but here goes;
  I have a Satellite L30 10Y and in my quest for drivers (now all sorted), I found many other models of L30, including the 10v, L30 x 10, 10 p L30 L30, etc.. My question is, is anyone know the differences between these models? I searched for the specs on all variants and can see no differences were observed.
  Type of processor, memory, general specifications all look the same!

  I thought that the location can be the difference, my BIOS (L30 - 10Y) has only 2 languages available, English and Japanese.
  Info received with gratitude, simply for the sake of knowledge is the reason why I ask this question

  Concerning
  Markkyboy

  Hi Markkyboy,

  The differences between these models are the hardware configuration. For example L30 - 10V Intel Pentium 2080 CPU with 512 MB of RAM and L30-10 X has Intel Celeron M 440 CPU and 1 GB of RAM.

  But why you want to know this?
  Satellite L30 is older, and as far as I know you can t buy it more.

• Satellite A135: Difference between recovery options

  Hello

  I have a Toshiba Satellite A135, OS: Vista Home.

  I'm trying to reformat my laptop using the supplied with my laptop system recovery disk.
  I gives me two options when I run the disc:

  (1) restoration of out-of-box factory State, and
  (2) wipe the hard drive.

  What are the differences between these two options?
  My goal is to make a total of cleaning on my HARD drive to get rid of malware.

  It's a mobile US and so I not quite sure what the exact difference could be m but as I m not wrong the first recovery option set laptop back to the factory settings.
  Another, the second option would be to format the HARD drive only

  If you have tried both options thanks to post the results

  Welcome them

• Any difference between these 2 types of installation of Windows?

  Hello, I usually install Windows 7 or 8 with DVD. (start)

  but, when I realized that I can just install Windows 7 or 8 my hard drive (I have 2 dosks: C and D.)  course, I start installation of disk D because C is the system)
  Just run the installer and it works fine, so I no longer need DVD disc. of course after the direct installation I remove the "old windows" folder with disk cleanup.
  So, I have a question.  Is there a difference between these 2 types of installation of Windows? I remove the old windows, but this facility still leaves some unnessesery files?
  What kind is best?
  Thank you

  Well, you can always copy the install on D:\ files and run Setup from there.

  Running Setup in vs on local drive (USB or DVD) media is not very different. Running from local drive will of course be much faster since it is read directly from the hard drive. To install from a USB key, download Windows 8 Web Installer and create your own:

  Create your own:

  http://Windows.Microsoft.com/en-GB/Windows-8/upgrade-product-key-only

  then:

  http://techingiteasy.WordPress.com/2012/11/07/part-2-How-to-upgrade-using-the-Windows-8-Upgrade-Assistant/

• What is the difference between these two series: ONE VIDEO and a VIDEO SN184?

  Hello

  Is anyone know the difference between these two serial numbers: A VIDEO and a VIDEO SN184?

  Hi Lennart,

  This might be useful: ONE VIDEO AND ONE NON-VIDEO

  Kind regards

  Sheena

• What is the difference between these two triggers.

  Hi guys,.
  
  Can you please the difference between these two triggers:
  
  A

  CREATE OR REPLACE TRIGGER  "T_CLIENT_STATUS_LOOKUP" before insert or update on "CLIENT_STATUS_LOOKUP" for each row begin if inserting and :new."CLIENT_STATUS_ID" is null then 
    for c1 in (select "CLIENT_STATUS_LOOKUP_SEQ".nextval nv from dual) loop 
       :new."CLIENT_STATUS_ID" := c1.nv;   end loop; end if; end;

  VS
  
  
  B

  CREATE OR REPLACE TRIGGER  "CLIENTS_TRG1" 
      BEFORE INSERT ON ERP.CLIENTS 
      FOR EACH ROW 
  begin
                    if :new.CLIENT_ID is null then
                        select CLIENTS_seq.nextval into :new.CLIENT_ID from dual;
                   end if;
                end; 

  I created manually trigger B. But to trigger A, on APEX, we have created by APEX lookup table. Then, I got a relaxing by APEX. but I did not understand the difference.
  
  Kind regards
  Fateh

  My vote 2nd relaxation. Because in the first trigger you use ' before insert or update", but there is nothing so far...; Oracle must go in the PL/SQL engine for each update to the table without reason; There is nothing to update, you do not have to shoot. While in the 2nd you do something sensible; If client_id is null, it will go to search by sequence forward.

  Concerning
  Girish Sharma

  Published by: Girish Sharma on June 9, 2012 13:06
  Just paste your code into the code for easy reading tags:

  CREATE OR REPLACE TRIGGER  "T_CLIENT_STATUS_LOOKUP"
  before insert or update on "CLIENT_STATUS_LOOKUP"
  for each row
  begin
  if inserting and :new."CLIENT_STATUS_ID" is null then
    for c1 in (select "CLIENT_STATUS_LOOKUP_SEQ".nextval nv from dual)
       loop
       :new."CLIENT_STATUS_ID" := c1.nv;
    end loop;
  end if;
  end;
  
  CREATE OR REPLACE TRIGGER  "CLIENTS_TRG1"
  BEFORE INSERT ON ERP.CLIENTS
  FOR EACH ROW
  begin
   if :new.CLIENT_ID is null then
     select CLIENTS_seq.nextval into :new.CLIENT_ID from dual;
   end if;
  end;
  

• What is the difference between these commands

  Oracle 11.2.0.1
  Windows 7
  
  Please tell me what are the differences between these two commands:
  
  RMAN/RMAN@ORCL catalog RMAN
  Catalog RMAN target scott/tiger RMAN/RMAN@ORCL
  
  Here the user scott is too have DBA role. Recovery catalog owner is rman. I wish to test backup and restore, as well as the above command must be used.
  
  To develop.
  
  Thank you.

  user12050217 wrote:
  Oracle 11.2.0.1
  Windows 7

  Please tell me what are the differences between these two commands:

  RMAN/RMAN@ORCL catalog RMAN

  This is happening to you the recovery catalog database but not connect to the target database. So you must issue a further statement while connected to RMAN to connect to the target database. Here the user RMAN is the catalog name of the owner.

  Catalog RMAN target scott/tiger RMAN/RMAN@ORCL

  You try to connect to the database target db user RMAN catalog as user Scott.

  Here the user scott is too have DBA role. Recovery catalog owner is rman. I wish to test backup and restore, as well as the above command must be used.

  The backup will be done using the Sysdba role, not with the DBA role. So you must still issue the command to connect to the target db. In the 2nd order you establish this connection and in 1, you must take another step for him.

  To develop.

  Its developed already in the backup and restore reference guide. Read it,
  http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/TOC.htm

  Aman...

• What is the difference between these two JKM and when to use that one.

  Please tell the difference between these two.
  JKM Oracle compatible o JKM Oracle compatible (Date of update)

  Basic difference is in the obligation.

  JKM Oracle compatible (Date of update) wants a DATE/TIMESTAMP column in the source tables (s) who will get inserted/updated updated by the source application. ODI will capture the data modified, based on the value of this column. Only the DELETION part requires a trigger to keep track of deletion happening at source one or more tables.

  Where as JKM uniform Oracle does not require any which TIMESTAMP column in the tables of the source (s). It uses triggers to keep track of the INSERT/UPDATE/DELETE happening in the source.

  Compatible JKM Oracle performance (Update Date) is preferable, because it will create a little over the head on your source system. SO if you have a DATE/TIMESTAMP column in the tables of the source (s) that gets inserted/updated by the source application, then go JKM Oracle compatible (Date of update).

  Otherwise search JKM consistent Oracle.

  Thank you
  Fati

• What is the difference between these privileges...

  What is the difference between these two privileges?
  
  CREATING INDEXES
  CREATE AN INDEX
  
  I tried to look through the Oracle online documentation and do some research on Google, but I can't seem to get a good search criteria to get meaningful results :(
  
  Darren

  Like doc Oracle mentioned, there is no separate CREATE INDEX privileges. It goes with CREATE TABLE.

  To create an index in the schema of another user, you must have the CREATE ANY INDEX system privilege.
  http://download.Oracle.com/docs/CD/B19306_01/AppDev.102/b14251/adfns_indexing.htm#sthref592

• Qosmio X - 70A - difference between nVidia and driver Toshiba GPU

  Is there a difference between nvidia and one packed by toshiba display driver?
  I'm using the Toshiba but Geforce experience gives me a headache with warnings about a newer driver and toshiba does not appear to provide a.

  Of course there is a difference between the GPU nVidia drivers (or drivers provided by manufacturers of graphics cards) and the drivers provided by Toshiba.

  The Toshiba driver page GPU drivers are changed and made for the mobile use.
  Each laptop model supports various components (CPU, cooling, modules, etc.) and different design. That is why the heat dissipation is always different.

  The GPU driver provided by Toshiba supports a kind of GPU overheating protection and protects the graphics chip of the damage. This means that the GPU performance are controlled by the driver and in case the internal temperature would rise to critical level, it would decrease the performance of the GPU. Also the laptop stops automatically if the temperature is too high.

• Satellite A210 - what are the tools of Toshiba?

  Can someone please help me understand some of the utilities / tools available from the Toshiba download site?

  I am trying to install Windows 7 RC1 on an Equium A210. Some of the utilities and drivers, I can understand; for example, things like the acoustic silencers, updated the BIOS, driver Bluetooth Monitor, Bluetooth Stack, controller card, reader DVD reader, display, update Firmware, infrared Driver, LAN Driver, Modem Driver, Sound Driver, Touch Pad Driver & Wireless Lan Driver makes sense.

  I can guess, but I'd like to know EXACTLY what the purpose is of other things such as:
  o help
  o Config Free
  o Desktop SMS
  o Fingerprint Software
  O hardware configuration
  O online product information
  o SD utilities
  driver o SPS
  O supervisor password utility
  o TEMPRO
  o tiles for Mobility Center
  o Value Added Package

  I can't find any sort of description as to what these things do, and why they would be useful for me; can anyone help... Please?

  And what is the Flash Media Driver?

  The exact model and specifications of my laptopl isn't important ine relatively to this question and I realize that none of these things are certified for use with Windows 7, but this really isn't the point; I don't know what they are used to with Windows Vista or XP or.

  Respect of your question, but for the EXACT description, someone here must have a lot of time and try to explain it all. The functionality of certain tools is quite complex and you can play around with these tools to see what they offer and what you can do with it.

  My brief description of the tools here, I know:

  * Toshiba Assist *.
  Is a small tool where you can find shortcuts to the key tools and utilities.
  With these tools, you can optimize and customize the operating system preinstalled

  * ConfigFree *.
  Is a tool that helps you identify problems with LAN/WLAN connectivity. To find out what it is and how it works read help option.
  There you can find guide of how to use it.

  * Desktop SMS *.
  Should help you send SMS via Outlook or Windows mail - http://www.comunified.com/

  * Fingerprint software *.
  If the laptop comes with fingerprint sensor, this tool is for the registration of fingerprints.

  * Hardware Toshiba of installation *.
  Just open it and check all the available settings.
  Sorry, but it is not necessary to write some explanations.

  * Online product information *.
  Simply open and you will understand what it is.

  * SD utilities *.
  Format SD memory card installed, and you can format the cards you use in multi-card
  (the location where you put the cards compatible and readable)

  * Driver SPS *.
  SPS driver required for DVD playback software, if you want to upgrade your operating system.
  Otherwise the won´t of DVD playback works.

  * Supervisor password utility *.
  If you want to create a supervisor password (locks complete BIOS or allows other users to change certain features in the BIOS).
  Not required for the features, just a security feature/add-on.

  * Tempro *.
  http://EU.computers.Toshiba-Europe.com/innovation/generic/TEMPO_RELEASE_V1/

  * Tiles for Mobility Center *.
  is a Toshiba from the Toshiba Assist plugin and the other will lock the computer (like pressing Fn + F1).
  You will find in the Windows Mobility Center

  * Value added package *.
  To make things more easy Toshiba packed 7 different tools in one package. In the past, each tool has been installed separately.
  Now, using a setup.exe that each of them will be installed. VAP contains:
  -Toshiba components pilot common
  -Toshiba Utilities
  -Toshiba PC Diagnostic tool
  -Toshiba Power Saver
  -Toshiba Button support
  -Toshiba zooming utility
  -Toshiba Flash cards

  Flash media driver should help settle the multi-card reader.

  One last thing:
  Normally Don t you need to update a driver. most of the components are installed immediately after a clean install of Win7. Just update those remaining. If you are not experienced in the use of certain applications or installation of drivers, it would be the best way to allow Win7 install your machine.

  Bye and good luck!

• Satellite R20: Difference between PSR20E-01Q00NPL & PSR20E-01Q00RAR

  Hello, what is the difference between Satellite-R20 model "PSR20E-01Q00NPL" and model "PSR20E-01Q00RAR"?

  Post edited by: Wade

  Hello

  As far as I know the only difference is the language. PL means BONE with the machine is for the Polish language and RAR should be for Saudi Arabia.

  If you're of the Poland, buy laptop PL. ;)

  Good bye

• Difference between these remote VPN

  Hello world

  I am studying for exam CCNP VPN.

  He had to confirm

  1 >SSL tunnel complete with the AnyConnect Client software.

  the user need software on PC to connect and they get the IP address of the DHCP on the SAA pool.

  2 >full tunnel RA IPSEC VPN Client or Anyconnect -.

  Above are remote VPN identical types.

  They look the same to me.

  Need to know there is a difference between them?

  Concerning

  MAhesh

  Hello

  Well it seems to me that one refers to the AnyConnect Client only and this is logical because it specifically referred to the complete SSL Tunnel. AnyConnect is software Cisco SSL VPN Client. The former Client VPN software cannot do this.

  The second mentions just IPsec RA full Tunnel VPN Client and AnyConnect. So it both visit the AnyConnect Client and the old Cisco VPN Client software that both can make IPsec

  -Jouni

• What is the difference between these columns?

  What is the difference between the following columns in the dynamic view V$ system_event?
  column: TOTAL_WAITS
  column: TIME_WAITED
  column: TIME_WAITED_MICRO

  They are the columns of the difference.

  TOTAL_WAITS: Total number of waiting for the event.
  TIME_WAITED: Total time waited for the event (in hundredths of a second)
  TIME_WAITED_MICRO: Total time waited for the event (in microseconds)

  Anyone can develop in more detail?

• Satellite R630 - difference between 13V and 14 days

  Hello

  I think to buy a Satellite R630, but I'm confused on the different versions. I've narrowed down to these two, 13V or 14 days.
  13V is less expensive (150-200), a larger HARD drive (500 GB compared to 320 GB) and weighs about 200 g. the battery of the 13V is the worst, it has only 6 cells and ~ 8 hours maximum, while the 14 days has 9 cells and up to 12 hours.
  Is this really the only difference, and if this is the case, would it be possible to replace the battery then with cell 9 since the 14 days?

  thx for your help!

  Hey,.

  I also checked the specifications of Toshiba's official website and I found the same difference you.

  Theoretically, the two parties (HARD drive and battery) can be replaced on both models very easy, so in the end, you must decide which model you prefer.

  My personal opinion would be R630-13V because the 8 hour battery life is really enough in my opinion and if you need more energy, buy an extra battery or replace the 6 cells with a 9cell. :)