Satellite L - How to fix the keys?

Similar Questions

• Satellite A40: How to reinsert the key on the keyboard

  Help...

  a key on my keyboard has extracted out.
  I knew nothing was broken.
  Does anyone know how to reinsert the key on the keyboard?

  Is there guidance on the internet?
  Or did someone knows how much cost a repair would be?

  It would take to leave my computer to the support office longer? Cannot work / live without my cell phone!

  Hi and thanks,
  LorelaiCk

  Hello

  Do you mean the PAC?
  The key caps are removable and it of very simple to remove or return on the keyboard.
  Push the CAP key to set the CAP over the keyboard.
  All that s

• Re: How to fix the keys on the keyboard on Satellite L40?

  Hello

  I wonder if you can help me... my friends cat sitting on my keyboard, the key 'b' stuck and fell. I have a series of Satellite L40. I have the blue and black hinge and press 'b '. I need my laptop for different assignments. Please help me! Any help will be greatly appreciated.

  Thanks in advance.

  It's that you can't fix a unique key. We can then remove the CAP and can visit his profile at the small plastic mechanism but I don t know if you can fix it.

  In general, when there is a problem with the nonworking keys the whole keyboard must be replaced.

• Satellite L500 - how to get the keys FN works on Windows 7 64 bit?

  Hello

  I need to reinstall Windows 7 on a Satellite L500, but I can't get the FN keys to work. Someone here would be able to give ideas on how to get this to work?

  Case No.

  Hello

  It's pretty easy. Go to the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] and download the utility of Vap and Flashcard support. Then, install Vap and restart your laptop. After that do it for the support of Flashcard.

• Access to a specific registry key (HKEY_USERS\S-1-5-18\software\Microsoft) causes a BSOD. How can I fix the key?

  Original title: access to a specific registry key generates BSOD. How can I fix the key?

  Scans the registry in XP causes a BSOD. The wrong key is HKEY_USERS\S-1-5-18\software\Microsoft. Access to manually also causes a BSOD so I can't delete or export it. I do not have a restore point from before the problem started. Other than the access to that key or run a search, XP works well.
  Is it possible to fix this?

  Not having no not this error in my notes (in other words, I've not seen at least 2 times), I Googled it and first fell on a MS KB article:

  http://support.Microsoft.com/kb/810558

  This article includes this statement:

  Contact Microsoft Technical Support to help heal the corruption in the registry.

  I think that is where you are right now, so let's see what is the response of the Microsoft Support Engineer, now that there is more information.  I always love to see what they have to offer first.

  Why and how did you change the system restore to create restore Points 3 a day for 30 days (FYI - that is not the same as a backup).

  If you were to solve some problem at the time, what was the question?

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  In the meantime, I would run a chkdsk /r on your volume XP since XP Recovery Console.

  If you are not sure of the SP2 CD you have is an XP bootable installation CD authentic and not some kind of restore CD for the Dell system to 100%, I would recommend this (that I've seen more than 2 times):

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• G530 - how to fix the Novo key features?

  Hello guys!

  Some time ago I completely changed partitions configuration on my laptop, because I wanted to have two systems - Windows 7 (the default) and Ubuntu. Previously, I had an image of the LENOVO_PART (partition Lenovo recovery) by Paragon and burned on DVDs. Its contain images (a recovery key 7) OKR - mbr, boot partition and system (with default settings) file that contains information about the partition sizes and sectors. I deleted all the partitions and create new partitions.

  Now I want to restore the original scores, so I restored the partition recovery DVDs, and I put his ID 12 (PTEDIT32) and rebuilt the other partitions on the accuracy of a sector.

  Now, I have the following partitions: 1 - start (default is unnamed), 2 - system (default is unnamed), 3 - Lenovo, 4 - LENOVO_PART. Unfortunately the Lenovo System Restore does not start once I pressed the Novo key, so I put the active recovery partition and I can't restore the original mbr, boot, and system. Everything would be fine, but the Novo key doesn't work, then press start the normal system of Windows 7, not the recovery system.

  Could someone tell me how could fix the Novo key without the Lenovo service features?

  BTW, sorry for my bad English

  It should work properly. It seems that there is something wrong with the a key.

  at this point, I suggest you call lenovo support line and ship your laptop.

• How to fix the position of the cmd window?

  I would like to know how to fix the position of the cmd window on the upper right corner instead of middle of anywhere in the window.

  Does anyone have any suggestions?
  Thanks in advance for your suggestions

  Hello!

  Open "Command Prompt", right-click the title bar and choose "Properties".

  Go to the Layout tab.

  In terms of the "Position of the window", uncheck "Let system position window.

  Change the Left and Top values to your preference - on my system (left = 290, Top = 0) are ok.

  On the same tab, look at the picture under "Overview of the window" to try different values - the window position changes after entering a value in the left text box and pressing the tab key.

  I hope that helps!

• How to fix the error with the code: 0xe7210001 failed to load powrprof, object: cls

  Hello

  Dose anyone know how to fix the error with the code: 0xe7210001, message: unable to load powrprof, object: CLSD-no-it is found;
  OR: Fingerprintsoftware OR error: replicas THotkey.exe message window and the computer freezes

  Maleware scanned and virus, also in safe mode, found no infection, reinstalled driver fingerprint, but nothing has changed.

  grateful for the help!

  Hello

  > message: unable to load powrprof, object: CLSD-no-it is found;
  In my view, this would mean that there is a problem with Toshiba Power Saver
  What laptop Toshiba, you have exactly?

  Maybe reinstall Power Saver could help. You can find it on the official website of Toshiba.

• How to fix the main button to paste constantly

  How to fix the main button to paste constantly

  Short of getting a replacement from Apple or risk a repair third shop there is nothing you can do. How about a button on the home screen? Go to settings > general > accessibility > assistive touch > on.

• How to fix the bug of 1970 on iPad mini 2

  How to fix the bug of 1970 on iPad mini 2

  It is not a bug. It is the result of a deliberate action by the user. However, some reported that the DFU restore, if it does not, then you must make an appointment at the Genius Bar at the Apple Store closest to him have supported. Apple is working on an update that will prevent users from doing it again. If you changed the date to May 1970 or earlier and he can't restart your iPhone, iPad or iPod touch - Apple Support

• Satallite A100: How to replace the keys?

  Is there a manual on how to replace the keys once they come out?

  My Satallite A100, a year, lost two keys a few weeks ago, and I am unable to replace them, even if I have all the parts (little). It got even worse when some more broke recently, when my grandson some peeled off, using exhibit created by the keys already disappeared.

  Thank you!

  Hello Mike

  Read your ad I don't understand exactly what is wrong with your keyboard but deleting and creating keycaps (plastic with written symbol) is not problematic. You have to just put this right into place and push it gently. You will hear a click and the key CAP will be back to the square.

  Under this cap is placed small plastic mechanism. It contains two small plastic parts. If they are deleted from the bottom, you can put them inside once again. To see how it looks like to remove any other key cap and see how it is placed.

  I did the same today, and with a little patience you can put it in the right position again.

• How to fix the microphone in Compaq Presario R3000

  Original thread title - how to fix the microphone in Compaq Presario R3000?

  Hello
  I have a laptop Compaq Presario R3000, and I tried to use Skype on it. Problem is that the other end can't hear me. I tried all the suggestions on the site of Skype to try and attach the microphone.  I tried the recorder (click programs, accessories, then entertainment to access), but when I record my voice, nothing, so I guess it has something to do with the microphone. Just to be sure - this model has an internal microphone? What I've read, it seems that it does. I downloaded the updated drivers, so I don't think that's the problem. Any suggestions? I'll try anything now, because I spent about 6 hours online trying to get the microphone to work and so far, nothing. Thank you! Patti

  Hello

  1. What problem is only on Skype?

  2. were you able to use this microphone earlier?

  3 have there been any changes made on the computer before the show?

  4. what operating system are you using on your computer?

  I suggest you to consult the steps mentioned below and check if it helps.

  Run the troubleshooter of sound recording
  Click on the link below and run the troubleshooter.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-recording-audio-Troubleshooter

  See the following Help article.

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  If the problem persists, then I suggest you to contact Skype to get help.

  https://support.Skype.com/

  It may be useful

• Problems of updates Windows XP - how to fix the incorrect Windows XP updates KB2633952 keep asking to install?

  Problems of updates Windows XP - how to fix the incorrect Windows XP updates KB2633952 keep asking to install? True, it is that it is already installed on your computer. If hide us, an another previous KB2570791 arises in our updates of Windows and asked to install anything, that it was installed... of the questions repeated and very annoying.  Help, please!

  (Microsoft Answers just sent us message have deleted our previous thread, ask for help!) We are simply not that these problems are problems with Windows XP updates related to DST or not?)

  Nadia. PA supporter said that your computer is hacked. He may be right. I can't weigh because I don't know what led him to this conclusion. If your computer is hijacked, then you should address that more that you need to fix this minor update. However, under the resolution of your problem to update, you can try this:

  Assume Windows XP

  Check the C:\Windows\System32\ directory for the presence of the file tzchange.exe

  If the file is not present or if the version of the file is not 5.1.2600.6171 or newer...

  Download the update appropriate 2633952 for your platform here:

  http://support.Microsoft.com/kb/2633952

  Run with - extract switch (e.g., Start > run > "[path to the downloaded file] \WindowsXP-KB2633952-x86-ENU.exe"-x)

  Of course, replace [path to the downloaded file] with the path to the downloaded file.

  Citations may or may not be required depending on the path. Place the x - out the citations if you use them.

  Choose a location for the extracted files (a new folder is recommended)

  Locate the extracted files. File tzchange.exe you want and copy it into C:\windows\System32

  That rerun Windows Update detection to see if the problem is resolved.

• How to fix the black screen of my hp pavilion g6

  How to fix the black screen of my hp pavilion g6

  Try a hard reset, works sometimes. Disconnect all external devices first.

  battery and power cord 1 / removal

  2 - Press the power button for 30 seconds

  3 reinstall only the power cord for the first start.

  4. turn on

• How to associate the key function on thinkpad T61p

  How to associate the key function on thinkpad__Fn Key__Hibernate mapping of keys for Lenovo Thinkpads

  How to map the keys "Fn F4" on my Thinkpad T61p to keyboard MS Wireless Comfort Keyboard 5000 to Hibernate?

  Your Thinkpad keyboard doesn't have access to the MS Wireless Comfort Keyboard 5000 drivers, firmware and add the functioon of Microsoft for the Thinkpad (and vice versa).

  Here is an article on how to remap the keys in Vista (with a link to a program that will help): http://www.howtogeek.com/howto/windows-vista/map-any-key-to-any-key-on-windows-xp-vista/. I don't know if this works with the function keys, but it's worth a try.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.