Satellite L50-A-170 - no boot and black screen on startup

Similar Questions

• B540 TDR and black screen on startup

  Hi all, I bought a B540 in April a power works fine until end of July when it began to show the error "display driver has stopped working and has recovered." a few days later I let him (I have need as a wifi station to connect devices remove) and after a few hours of work, when I came back, the screen was off and there wa no way to turn it on. I press the power button for a few seconds to turn off the pc and he died. When I turned on, the computer started but the screen is off (not the 'lenovo' logo was shown on the eve) but everything else seemed to work (play plug/unpluging usb external hard drive the sound of the carachteristic). I turned off again and wait ten minutes before the market again, this time above the 'lenovo' logo was shown, but it seems that the pc failed to boot win 8. I unlplugged everything, removed the power cord, wait an hour and after that all started ok but the error message "display driver stop" was still there. After this date the computer randomly starts ok or with the screen. Given that I do not use it intensively Isuspected some windows update to cause this strange behavior and I'm trying to use a point of restoration, until July 17, but the problem was still there. Then I removed all recent windows update of June on, and I realized that in one case, it was not possible (i.e. the "remove/uninstall" button not showed that KB). I googled around and found the subject KB has been reported to broken system and the only way to react was to use a DOS command to reatore a new installation of the system. I did and actually everything works ok for 2 days (one day, I actually use the PC all day to upload stuff to iternet it to work). Unfortunately, after that day, everything seems to repeat: new 'pilot not resposinding to display' and a black screen at startup.

  Please consider that the system is quite new and clean (only 3/4 months of life) and everything works fine until end of July. What do you suggest me?

  
  

• Satellite C650 - stuck with the underscore and black screen boot

  Model: satellite C650

  Operating system: windows 7 Home premium

  Problem: when I try to turn on the computer I see the Toshiba screen and then a black screen with a underscore that blinks several times then stops, and the computer is blocked like that. The fan seems to be working. I can't go to mode without failure or boot options, even if I press f8 or f12 nonstop.

  Last time I started mode, I was stuck on the screen but the connection keyboard touchpad did not work and I couldn't stop. After that I have the strength of closing down and try to restart stuck like that. No beeps or anything like that.

  Any help would be appreciated.
  Thank you

  Good news.
  Thanks for the comments.

• Satellite L775D-107 is not starting and black screen

  Hey
  I have a problem with my Toshiba Satellite L775D-107 and I hope you can help me.
  Since yesterday, my laptop displays a black screen. When I push the Start button, nothing happens, but you can hear it is aired but nothing more. a few hours before that I was working on it to Uni and everything was fine.

  I had the same problem a couple of weeks, and I read on the internet that he could help out the battery for 3 minutes and then press F2 and the Start button. Nothing happened, but after 2 hours I tried to start again and all of a sudden it started correctly and worked flawlessly.
  .
  Now I'm having the same problem again and I tried the same procedure but still nothing happens. Always the black screen and just the sound of the air coming out...

  I've got very important documents in United on this laptop, so I hope you can help me.

  Thank you in advance.

  Hey

  My L50 did the same thing. Sometimes, when an another Toshiba is nearby.

  Sombody bnows so this can't be helped?

  Mike

• Satellite Pro P300 - 13 m - boot problem: black screen with 3 beeps

  Hello

  Satellite Pro P300 - 13 m, I bought a few weeks ago and in time, I had about 5 - 6 times the same rear screen when I tried to start the system. When he does this notebook gives 3 loud beeps (not sure what that actually means).

  When he does this I have to press the power button for 5 seconds and after several times doing this that it will show the Welcome screen toshiba... then sometimes it will automatically restart again and I get this annoying black screen again. Most of the time when I wait about 10 minutes and try to do as well the system starts as usual... Yes... very strange thing here.

  To be honest, I don't want to send the laptop for Toshiba once again, as I could use for my business...

  Then. What could this be? I've already updated the latest version of the BIOS.

  Thnx in advance

  Carl

  Hello Carl

  I have the Satellite Pro P300 (PSPC1E). I installed Windows XP Home edition and my Vista. Use the two operating systems with success and everything is OK.

  What operating system do you use?
  Have you noticed that on the first day?
  Your laptop is placed correctly on the desktop without cooling vents?
  When you start Notepad you see every time that Toshiba welcome screen?

• Server 2003 and black screen after startup

  I created a P2V using Symantec Recovery 2010.  I made a few of them in the past, and this is the first time I had no problem.  The complete p2v without no problem, generate a large vmdk file.

  1. create a new virtual machine in VMWare Workstation 7.1, by selecting the Server 2003, 2 cores, 4 GB of ram (even as a physical host).  Turn on and you get the screen Server 2003 and after that, you get a black screen.

  2. I tried F8 for Mode safe on the 2003 Server screen.  It works and I am able to start under server 2003 in safe mode.

  3. when the black screen comes up, I can see a lot of action hard disk for a few minutes and then it stops.  I let it sit for a few hours without change.  I also tried to reboot a few times to see if it changed anything.

  4. my ditch last effort was to create a whole new p2v, which has exactly the same problem.

  Any other ideas?

  You may need to disable the hardware is no longer available via safe mode

• Satellite S955 starts not to POST and black screen

  Hello

  I have a problem with my s955 (14 months). He is not able to start more. When turned on, I hear only the cooling fan spins up and down and nothing more. The last time, it took almost half an hour to work around this failure. When turned on it shows no problem at all. When you stop it is better to pray. It now seems to be missing. After an hour, I see no sign of life except cooling fan activity.

  I went through all the stuff mentioned in another forum of Toshiba as turned off, remove the battery, keep and maintain the power button for at least 60 seconds. I even replaced the RTC internal Li - ion, but without success. Because it is not covered by warranty more I opened it. No sign of didn't burn except a suspicious oxidation of some contacts.

  I contacted Toshiba Italy (even if it is a U.S. model.) and I expect a possible answer next week. I ran out of the possible solution except replacement of mobo. Is there anyone around who has the same problem? Could you please give me a help?
  Thank you and best regards

  Pyder

  Hi, not Toshiba Italy news but I found a Toshiba authorized service workshop that may solve this problem. It seems that, beyond other speculations, the problem may be issued by the fuse of power mainboard (read this answer interesting of maxtek73 [http://forums.toshiba.com/t5/Batteries-and-Power/My-Toshiba-Satellite-Laptop-Will-Not-Turn-On/m-p/584008#M11147] at the end of the post). It seems reasonable. In fact, keyboard, dvd player, charge battery, hd, and cooling fan are powered by the motherboard. It seems that there is not enough current to pass initial tests before POST. This could explain why the cooling fan trying to run at maximum speed, but he can't. I had to remind that to turn on, no equipment TI push fans at max speed and then slow down to normal speed before entering the POST process. I'll have a conversation with the technician of the workshop and I'll keep you in the loop.
  Best regards
  Pyder

• Power outage during Vista SP2 install; black screen on startup of the PC

  Hello-

  I have a PC desktop Gateway which is no longer start after a power failure has occurred during the installation of Vista SP2. The computer displays the progress at the bottom indicator, then, before that can display the login screen, the screen goes black, with a white cursor. CTRL-Alt-Del and Ctrl-Shift-Esc do nothing.

  I tried without success to the following:

  * Safe Mode/Safe Mode control guest - boots to black screen new
  * Startup Repair - told me there is nothing wrong
  * System Restore - tells me there is no available restore points
  * System restore the OEM DVD - can not find hard drive
  * Re-install this is disabled because I can't start Windows Vista-

  There are * all * options other than wiping the disc/lose all my data? The PC is in a remote area and backup drive is not an easy thing to achieve.

  The PC is no longer under warranty of the bridge, and I understand that Microsoft supports is no longer installs OEM of Vista.

  Can anyone help?

  Thank you

  -Andrew

  I can tell you how to make bootable disks, but you already have a disk.

  He has changed since good means of XP repair install from disk by booting from it.

  I would add that info to disk Bootable repair, just in case your DVD is a factory of one computer.

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  It's Vista only repair installation option these days.
  It must be switched on!
  Not much use, is it!

  Good luck with it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Above information shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista Startup Repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• HP 500-046: 6 beeps at startup, can't access boot options (black screen) but then Windows loads ok

  After making a system image backup I wanted to test the recovery disc. To start from the cd tried to change bios to disable secure boot and enable legacy startup.  Could not get the pc to boot once so reset cmos by shorting the pins on the mboard.  Now to start always get 6 beeps and black screen, but after a minute, windows login screen lights up and it works fine.  Unable to access the bios Setup screen any key used at startup.  6 beeps indicates a video card problem, but no material error in device mgr points.  Want to update to Win 10, but unsure about do to address this problem starting.  Appreciate any help.

  @JohnN59,

  Thanks for the information to know.

  You can try the DVI port on the motherboard

  I/o Ports and internal connectors

  Rear i/o ports

  Figure: IO back panel

  

  1. USB 2.0: 2

  2. Output S/PDIF port optical

  3. VGA

  4. DVI - D

  5. LAN

  6. USB 2.0: 2

  7. USB 3.0: 2

  8. Audio: Port of central/subwoofer (yellow-orange)

  9. Audio: Rear Speaker Out port (black)

  10. Audio: Side Speaker Out port (gray)

  11. Audio: Line (light blue) port

  12. Audio: Output line port (lime)

  13. Audio: Microphone (Pink) Port

  If is not shows the start then try the Bios reset/recovery (windows + B key).

  Please keep me updated.

• Satellite L40 - 18z - black screen on startup

  I have Satellite L40 - 18z. It has a black screen when I try to start it. I took out the battery unit and unplugged overnight. And again, I have a black screen.

  Is there anything else I can try?

  Have you tried taking it to warranty service?

• Blue and black screen problem

  I have the blue and black screen problem. I want to format my C drive, but he said no, that you can not format this drive. I know that I have Virus problem also and I want to format anyway. Please help me.

  Thank you

  Hello

  ·         What operating system do you use?

  ·         You get the error message?

  ·         You are able to boot to the desktop?

  Method 1:

  I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

   

   

  Method 2:

   

  Why my screen is black when I start Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

   

   

  Method 3:

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

• black screen at startup and even on HDMI

  My hp pavilion dv7 gives me a black screen at startup and even if it is connected to my HDTV via HDMI. have tried several methods but still not working (the battery grip and long pressing the power button and then using the AC adapter to turn on). Can someone help me solve the problem please.

  Yances,

  Welcome to the forum.

  Have a look here:

  Provides the steps necessary to test the memory and the hard drive and restore the operating system if the laptop does not start and no error message is displayed.

  HP Notebook PC - troubleshooting black screen displays with no error message during startup or boot

  The next document implies that the system provides an Error Message:

  HP Notebook PC - troubleshooting on a black screen error Messages that may occur during Startup or start-up

• Black screen at startup, unable to boot from the CD

  I did something wrong on my Thinkpad T43 2668, now I have Black Boot screen cannot Access IBM, can not press a function key, cannot start from the CD.  Here's what I did:

  1 got unwanted winxp sp3 updates automatic, then restored to the permeable point via Windows XP system restore, then, cannot start system; cannot boot from the Windows XP CD

  2 2 demarrer start from Linux Live CD, format hard drive and install ubuntu, hidden Partition of domain is not deleted, always there;

  3. can start Linux OS, but black screen on startup. There is no way to see what's happening at startup; Pressing a key of function or IBM bottons returns no result, always boot in Linux;

  4. cannot boot from any CD bootable legal except Ubuntu Live CD;

  5. no means of access Bios to set the boot sequence, therefore, cannot boot from USB floppy either.

  Advice is appreciated!

  PS. I tried Linux live CD some time ago before this trouble, click on "help me to boot from CD", got something installed. I guess it's something installed out of the box and that is why now I can boot from a Linux Live CD.

  
  

• Satellite A305-S6898 - half black screen at startup

  I bought this laptop in early March and had to return to store due to a problem at startup when half of the screen would be black on the Windows login screen. They ordered me a new I got about 3 weeks ago and I used it for about a week before I had the same problem of a half black screen on startup.

  Now he has been running really slow and there is a time, I've had it freeze on me and my screen turn into a bunch of colored lines.
  I had to reboot in safe mode and run a virus scan just to make sure it wasn't my problem.

  I do not download anything on this computer other than basic messengers and photo editing programs.
  I have a HP MP7170N desktop computer which I use to download everything that seems to work faster than the laptop and I use photo, download torrents programs and store most of my pictures and music on this one and it has only 1 GB of memory compared to this the 4 GB.

  What is the problem?
  Anyone have any ideas as to what I can do.
  I can't really go back to the shop because they give only a grace period of 14 days for returns.

  > I had the same problem of a half black screen on startup.
  > Now he has been running really slow and there is a time, I've had it freeze on me and my screen turn into a bunch of colored lines.

  Doesn't look good for me it sounds a bit like graphic problem.
  Before contacting a professional Toshiba authorized service provider would be, it would be interesting to know if you have seen improvements after recovery procedure and BIOS updated.
  I think you n t get a recovery disk because you can create it using the verification of software preinstalled Toshiba manual how to create the recovery disk

  If, after installing new check usability of portable and so similar issues still persists.
  If nothing will change it s is strongly recommended to communicate with an ASP.

• Black screen on startup Satellite A80

  I get a black screen at startup what is the problem and what is the solution for it? It might have something to do with the cold?

  Hi poly

  Please put more details on the problem, because it s not easy to say what has happened without any detailed information. You hear the operation of the HARD disk or fans?
  Switch you to other devices to display, before this problem occurs?
  Unfortunately it FN + F5 key combination doesn't work if the operating system has started so it could be a malfunction of the equipment. I don t think you can solve this problem by yourself. In this case, the only way is to contact the service.