Satellite P100-209 hangs at startup

Similar Questions

• Satellite P100 ask drivers at STARTUP

  I have a Satellite P100-160, but when I boot it hangs for about 10-15 minutes, then finally, boots. When windows starts, it says you need to install the driver software for my mass storage controller and my generic PCI Hot Plug Controller.

  I don't know Mr. what drivers are in the drivers section for my laptop. Can anyone help please?

  The P100-160 must be a model PSPAAE series.

  I put t know what OS you use, but the Mobile Intel Express Chipset driver 945GM is placed on the European driver Toshiba page. It s for Win XP

  By the way; If you have installed XP then the XP driver for the mass storage controller is not available because this feature is only supported by Vista.

  I would recommend anyway to check the page of the Toshiba driver so all the drivers have been installed.

  The laptop can start a slower due to various problems;
  Antivirus software
  Firewall software
  Many processes that are loaded in the background of the BONE

• Satellite P100 - white screen on startup: No. BIOS!

  Hello

  I have a Satellite P100-286 (PSPAGE) I bought last year, and due to an unsuccessful attempt to update of the BIOS under Windows Vista, the laptop has more a BIOS. Is there anyway to Flash without sending the laptop somewhere?

  See you soon,.
  Andreas

  I doubt it. Once a BIOS is damaged, its cant boot or anything like that, so you can't reflash the BIOS. I guess that the motherboard would need replacement.

• Satellite P100-238 hangs after a svchost.exe program error message:

  PC: Satellite P100-238 of December 2006.

  about a minute after the start, I get an error message:

  Danish:
  Svchost.exe - programfejl
  Speicherbausteinen ved '0x745f278o' refererede hukommelse ved "0x00000000." Hukommelsen kunne ikke 'read '.
  Klik OK p for afslutte program.
  Klik p Cancel in the fejlfinding udfe I prioriterede.

  English translation:
  Svchost.exe - program error
  Statement on memory refered "0x745f278o" on "0x00000000." Memory could not be "read".
  Click OK to terminate program
  Click Cansel to to search for error in the program.

  After the error message above the PC crashes completely and I can only turn off by the power button.

  What happened with my PC?
  What should I do?
  How can I access my data to make a backup?

  Hello

  I have goggled a bit on the net for more help and I was surprised that many Windows users have had the same problem
  So I thought that there must be something wrong with the windows operating system generally.
  I studied a bit in the MS knowledge base and found this:
  http://support.Microsoft.com/kb/916089/en-us

  According to the news of MS this problem may occur when you have Microsoft Office installed and trying to the Agent Windows Update find updates for Windows Installer.

• Satellite L555D-d7005 hangs at startup

  I have a Satellite L555D-d7005, over 2 years, so out of warranty, installed Windows 7 pro, 3 weeks, now today it blocks to the homescreen Toshiba for about 45 seconds or more, after that it starts windows very well. My question, is this normal or not, he used to stay at the splash screen for about 5-10 seconds, and then start windows without problem.

  He never hung this well before. I don't know what to do, please help.

  According to my experience, it is definitely too long.
  Try to set the BIOS to default settings and check again.

  Have you noticed that just after installing Win7?

• Black screen on startup - Satellite P100-350

  Hello

  I bought a Satellite P100-350 2 years and a few months it sometimes does not further the "toshiba" sign at the start, the hard drive does not. If I then press the Start button on the computer, it stops immediately. (I can't press it for 5 seconds as they normally do when it works properly).

  In this case, when that I raise, I lorsque que je le relance, je revois see the toshiba screen and a message asking me if I want to start windows with the last configuration and if I do, it opens the windows and everything works fine...
  I checked, I don't think I have a virus...

  I read also some other posts on the topic and updated the bios as advised but it changed nothing!
  What kind of pain is it? The energy supply, bios, operating system,...?

  Thanks for your help!
  Steph

  It's hard to say... How good are you with computers? Do you think you could do a diagnosis on your machine?

  I suggest to download the 'Ultimate Boot CD 4 Win' and check your RAM/disk hard/chipset/etc... on the malfunctions by doing some tests with the applications on the "UBCD4Win.

  Otherwise, I recommend giving the machine to someone who has some idea on laptops and allow him to check everything.

  Welcome them

• Satellite P100-275: DVD - RAM drive is always detected at startup

  Hello

  I have a problem with my Satellite P100-275, all materials are installed correctly, but when the PC starts, I always "new hardware found" for: hl-dt-st dvdram gma-4082n.

  I tried to install the connection to Internet, I tried with the driver c:\toolscs\DVDRAM software\Setup.exe, but nothing seems to work.

  Here is the screenshot of the hl-dt-st dvdram gma-4082n in materials:

  http://img209.imageshack.us/img209/7326/materialsza4.jpg

  Thank you

  Hello

  Is this original delivered by car or did you upgrade?
  By the way: as far as I know if you use the original recovery with original configuration hardware delivered media, everything should work well. If you change something about yourself, it is possible that something is wrong. Usually, for DVD player, it is not necessary to install a special driver and because of that, I'm a little confused why this message occurs at the beginning upward.

  Please give us more info on this drive.

• Satellite P100-347: blue screen at startup - unable to boot volume

  Recently, I left my 2 younger brothers playing NFS Carbon on my satellite P100-347, pre-installed with media center edition 2005, and now it fails to start.

  During the process of possibly starting a blue screen appears for about a second and then it shutsdown (I managed to make the words "unable to boot volume" on the basis of the blue screen).

  I tried to boot with a XP media center DVD but it gives me only a possibility of reinstalling the operating system with a cost of losing all my important data. Normally I would have picked up the system, but I don't want to lose my data.

  Can I do other than take it to a technician?

  Hello

  Well, for the most part the BSOD appears due to hardware problem or serious software.
  In your case, the software problem is possible

  Unfortunately, I think that the new installation of the OS is the best way to get the laptop works properly.
  Now, you want to know how to record data and the files well, I think that you should remove the laptop HARD drive and must try to connect the 2.5 HDD via external USB controller to another computer. Then you can save the files to the other HARD disk

  I think, now, you know that regular backups are important and necessary!

• Audio dropouts on Satellite P100

  I have a Toshiba laptop Satellite P100 PSPADE.
  OS: Win XP Professional
  Connected equipment: MOTU 828MKII Firewire or Terratec DMX 6Fire USB.
  In both situations, audio dropouts occur, using Cubase SX3.
  I already disabled some elements in the Manager of hardware devices, such as:
  -Microsoft AC adapter
  -Control compliant ACPI Microsoft method battery
  -Network adapters
  -Bluetooth device
  -Sound controller
  - ...
  Only the devices battery generated many audio dropouts, which are now reduced by disabeling the drivers.
  Nevertheless, sporadic abandonment occur always.
  Although, Terratec, and MOTU audio devices using the maximum buffersize, increasing latency, but reducing the school drop-outs, audio drop outs occur.
  Reading a few articles, I came to the feature 'gas CPU"of the Toshiba laptops, which might be responsible for these audio dropouts.
  The articles mention that he is a non-configurable feature of Toshiba.
  Audio dropouts seem to occure synchronous with the activation of the fan.
  To contol the latency, I use "DPC latency Check" program, which generates a bar graph.
  The peaks of bar-graph each time that the fan turns on and at the same time, a stall audio is heard.
  Is there a solution to the problem of audio dropout?

  Erik

  Hello

  There were MANY discussions on this subject, especially with your machine. Many users tried different solutions such as remove things from the device manager like you did already.

  In General, editing music with a laptop are not really optimal. For example:

  I have a computer of office machine with a Pentium 4 2.8/1 GB RAM/WD Raptor/ESI Juli @ and I also work with Cubase SX3. There is NO problem with the latency (latency DPC latencies around 15-30 microsec Watch).

  I tried to make some changes on my Tecra A9 which has a Dual-Core, 2 GB of RAM, a HARD drive with 7200 RPM with XP on it, etc... and at the beginning I had many heavy withdrawals.

  But after a search of this forum and a few other sites, Ive created a small tutorial:

  1. services:

  For Windows XP: Please visit the following site: http://www.blackviper.com/WinXP/winxp.htm
  and apply the configuration of services twisted.

  For Vista: Go to this site-> http://www.blackviper.com/WinVista/Services/ and see the following:
  -Configurations of Viper black Windows Vista SP1 Service-> twisted
  -Super Tweaks

  -In addition the client must disbale the service "smart card"!

  2 disable the following devices:

  -Compatible control method battery ACPI Microsoft
  -Intel ICH8M Ultra ATA Storage Controllers (including the optical disc drive)
  -Ethernet and Wifi
  -Storage-> Microsoft iSCSI initiator controllers
  SD card controller

  3 disable the powermanagement features:

  -In 'Device Manager' option to allow the computer to turn off this
  all "USB root hubs" should be unchecked
  -Create a separate powerplan who can be named 'Maximum' and put EVERYTHING
  maximum (disable these features like 'sleep' and 'sleep')

  4. run the application 'msconfig' (internal tool of windows) and remove all the
  unneded services and applications in the startup list, which could include
  some tools Toshiba as "configfree" "flashcards" etc., but at YOUR OWN RISK!

  5. as you have more network connections, you can also disable all
  services such as "Windows Defender", "Windows Firewall", "security policies."
  etc. which contains a large number of resources!

  6. I recommend to keep all the drivers including BIOS update. You can use
  drivers of Intel on the chipset/storage controller/graphic chipset
  which most are more recent so our pilots.

  -> Below only for Vista!
  7. at least, you must disable this thing together graphic Vista as
  «Aero, "Windows Sidebar", etc., and switch to the Vista Basic theme.» The window
  Manager themes Vista is necessary and a LOT of resources that offers more
  resources for applications and results also in a latency time reduced.

  8. check the Web site of the manufacturers on the updates support for the device that is in use! (which means the sound card ;))

  It could be that useful...

  Welcome them

• Satellite P100 - 347 (PSPA6) and Conexant audio problem in Windows 7 64 bit

  He is a [old problem | http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=175972#175972] which seems to have affected many people.

  Conexant HD Audio (hardware id: HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5047 & SUBSYS_1179FF31 & REV_1000)

  There has been no official driver published this work in Windows 7 64 bit. It works fine in 32-bit, windows 7, and using different drivers from other sources + partial + fix can be found.

  Using these drivers:

  [Audio 4.8.0.0 | http://209.167.114.38/support/Download/files_downloads/pspa1c/vista/Audio4.8.0.0.zip]
  [sp35683 | ftp://ftp.hp.com/pub/softpaq/sp35501-36000/sp35683.exe]

  and some of the advice [here | http://laptopforums.toshiba.com/t5/Windows-7/Windows-7-64-bit-drivers-for-P100-P105-Users/m-p/67516], it is possible to get the proper functioning, but * only * when using the S/PDIF (HD) audio output. When the S/PDIF cable is removed the internal speakers make noise for a fraction of a second, then silence.

  I tried everything and this issue has been around for months and months, but no perfect solution seems to exist. I was wondering if there is a way to update the drivers of the HD Audio Controller, integrated in Windows 7. Or maybe a hack that allows the internal speakers continue to work (they work for one second!)

  Please, any help on this would be greatly appreciated

  Hello

  The Satellite P300 and P500 Satellite supports the audio chip Conexant too audio driver published for these two models of laptops should work on Satellite P100!

  Please check this!

• Crisis of the BIOS Recovery on Satellite P100

  Hello

  Usual story. Windows (WinPhlash) BIOS updated was wrong and my P100 is dead.
  I fell on the collection procedure of the crisis that should work on any laptop Phoenix BIOS based.

  However, I either do something wrong or the motherboard is blown more than I expected.
  In my case, I follow the procedure carefully, but my P100 won't enter in crisis recovery mode at all.
  He's not even trying to access/boot USB floppy drive.

  I just tested with A100 my wife and all the readers (HD, DVD and floppy drive) light their LEDs right after turning on the laptop, if the floppy drive works fine. When I press the power button on my P100, fans begin to turn, turn hard drive (and heater for chipset gets hot after awhile), but by pressing Fn + B or Win + B as described in procedure of CR does not any change in the behavior of the laptop. Floppy drive is Toshiba, marked, so there should be no compatibility issues. Voltage all the USB ports, but somehow my P100 refuses to access the floppy drive at startup.

  Any help?

  See you soon,.
  bladteth

  Satellite P100 say isn't the same thing as the Satellite A100.
  The two laptops are supported on different motherboards and different BIOS.

  I put t know what you did, but I see only one solution.
  You will need to contact the ASP in your country for assistance technicians should be able to help

  Good luck and best regards

• Satellite P100 - 434 BSOD boot problem

  Hello everyone!

  I have laptop Toshiba Satellite P100-434 and lately I encountered many problems during startup.

  1. the laptop starts normally until the entry of the password. Then, in the middle of typing BSOD.
  2. the laptop gets BSOD or turns off 2 seconds after the Microsoft bar appeared.
  3. the laptop won't turn on - after launch is only a flash of three blue LEDs on the right and the screen remains blank. No home Toshiba screen.

  After a few attempts I managed to get the Toshiba welcome screen (this is after the second flash), but there are other issues later, the laptop shuts down or trying to launch startup repair. He speaks only of unspecified error and restores the previous state.
  4. I tried to enter safe mode, but several times I met the same: the laptop turns off after loading some drivers.

  BSOD are too short for me to identify what is ongoing - I noticed something just BAD POOL and IRQL NOT EQUAL to something as if it was something with the drivers, no doubt the NVIDIA driver display. I uninstalled and downloaded a new and installed (version 7.15.11.5666). EMH is NVIDIA GeForce Go 7600. Once, there was some information about dxgkrnl.sys?

  I did the Test of memory Windows at startup - no error.

  I scanned for any viruses: my AVG removed some Cryptor virus, but the problem is still there.

  The operating system is Windows Vista Home Premium SP 2.

  I don't know what the problem is. This is the driver of display or any other driver? Or maybe some powers of the problems? All advice welcome!

  > Anyway: I would like to know if the problem is hardware, or rather the related software, because I take my laptop to repair if there is something I could do download/resettlement.

  This question can be easily answered: you must install the Windows operating system.
  If the windows installation would be finished correctly and if you will not see another BSOD after installing, it emits so was related to the (software) system. But if the system is not possible or if BSOD would appear during the installation and after installation, then I suppose that something is wrong with the material of s for laptop.

• Driver Conexant HD Audio - Satellite P100 PSPA3C Win XP problem

  I have a Satellite P100 PSPA3C MA202C.

  I found on the Web from Toshiba site a new Conexant HD Audio 3.44.0.0 driver version for my laptop (Windows XP, 3 GB of RAM)
  and had the bad idea to install it. After installation, the sound is terrible Crackle and interruptions.
  including the sound of Windows boot at startup, when you first open during playback and audio files.
  When a UC program gets started.
  It's never happened before.

  I acknowledge that during installation, I received a message from the system
  warning that this driver is not signed as having managed the "Windows logo test '.

  However, the same situation stands for previous versions of site Web from Toshiba, like 3.21.0.52, who gave the same problems.
  Then I wanted to let Windows choose the right driver, but it turns
  "Microsoft function driver UAA for HD Audio Conexant Waikiki" which provides its own, but has no audio in (microphone).

  So now I'm stuck with the crackling and interruptions of Conexant, or with Waikiki have no microphone.

  It's strange, because the initial configuration worked well. Unfortunately, I do not know how to restore the original configuration,
  It is not written anywhere, that the system cannot understand itself and of the restoration came with the computer dvd
  only allow for a radical total restoration of the status of the day of sale, which is not acceptable.

  What a disappointing experience!

  Can someone help, please?

  Hello!

  S DVD supplied with the computer are called recovery disks and it's the way to return to the factory settings.
  The disc contains the Windows preinstalled with all the drivers and tools of Toshiba.

  I know it's strange, but in my opinion, there is no other way to solve this problem. So back up your data first HARD drive will be completely formatted.

  Good bye

• Satellite P100-203 takes very long to start upward

  I bought my computer Satellite P100-203 in October 2006, since day 1, it takes a lot of time that the computer is ready with commissioning. WXP MCE is installed. I think that a computer with Intell T2500 dual core 2.0 GHZ/1024 MB should be ready in a minute...

  Someone at - it an idea may be what the problem?

  Hello fred,.

  Believe me, the laptop with dual core 2.0 GHz CPU doesn't faster start as a laptop with a Pentium 4 2.0 GHz.
  The question is. What and how many applications will load at start up?

  Many applications making it slow and long start-up procedure. I think that you use Anti virus software. If you disable the startup of these applications at the beginning, the phone should start a lot faster

• Satellite P100-194: blue screen - nv4_disp is in an infinite loop

  I have a Satellite P100-194 since 28.08.06 and I get this blue screen telling me that the nv4_disp (I think it's the graphic driver nvidia) is in an infinite loop.

  Error message:
  ---------------------------------------------------------------------------------------

  (English translation):

  "Device driver got stuck in an infinite loop. This usually indicates problem with the device itself or with the incorrect programming hardware device driver.

  Please check with your hardware vendor, updates to the driver.

  Technical information:

  "STOP: 0x000000EA (0x857F66E0, 0x85CL22D0, 0xF7C61CB4, 0x00000001)".
  

  ---------------------------------------------------------------------------------------

  Then he said something about the execution of a physical memory dump and I had to reboot.
  Sometimes the monitor turns off just (without blue screen) and I have to stop again. Or the screen shows several vertical strips during startup. in the case of windows window should come it gets black. I had this error 5 - 6 times since I bought it.
  This could be a damage on the geforce 7900 gs card or RAM may be defective or do I have new chipset... drivers?

  The drivers are the latest (from toshiba).

  Technical support told me to format the pc.
  The laptop is new and was very expensive, so I find it very strange that I need to update anything to make it work properly... ? ! ?
  Yesterday I formatted the laptop and reinstalled with the Recovery CD... because the error is sometimes, I don't know if it's working now, but I would be grateful for any HELP or comment on that.

  Thank you.

  Monika

  Post edited by: [email protected]_DE

  Post edited by: [email protected]_DE

  Hello Monika

  Please try this http://support.microsoft.com/kb/293078/en-us

  It's very strange because I know Satellite P100 is very good laptop of sole and this question cannot be sorted as any kind of common problem. If nothing helps, please contact your local dealer. They will help you.