Satellite P300: - 0701 usb over current error on the splash screen for the hc port

Similar Questions

• Error 0701: USB over current on HC/Port - Bus: 00 H Dev: 1DH Fun: 01 H / Port: 00 H

  I have been using the laptop without any problem until I encountered ERROR as follows: AArrgg! @#$

  ************************************************

  Error 0701: USB over current on HC/Port - Bus: 00 H Dev: 1DH Fun: 01 H / Port: 00 H
  Error 0701: USB over current on HC/Port - Bus: 00 H Dev: 1DH Fun: 02 H / Port: 00 H

  Press F1 for Setup, press F12 for Boot Device selection Menu
  **********************************************

  Well, the F1 takes me into the Bios, well all eyes. And F12 does nothing. I tried to boot from the CD drive, but of no use, I tried to solve million methods but invain I could not if anyone has a solution for this, you can provide, I will be very grateful

  Thanks in advance

  Srini

  Insert the cd of the same wait o/s until it reads "loading windows files" then here you eject the cd /dvd. This work for me.

• Questions on Satellite A100-787 - USB over current on HC/Port USB

  The next day, when I turn on the laptop
  TOSHIBA Satellite A100-787
  I saw the error message: -.

  ERROR

  0701: USB over current ON HC/Port - Bus: 00 H dev. : 1DH Fun: 01 H / Port: 00 H

  ERROR

  0701: USB over current ON HC/Port - Bus: 00 H dev. : 1DH Fun: 01 H / Port: 00 H

  ERROR

  0701: USB over current ON HC/Port - Bus: 00 H dev. : 1DH Fun: 01 H / Port: 00 H

  It me not allow Windows to connect. Hope someone has a solution for this error.

  Hello

  Believe me; I see this error message for the first time.
  This certainly isn't a simple error due to software problem, but I think there might be something wrong with the hardware.

  But before you contact the ASP in your country, you should check this:

  If you are not able to boot in windows, so why you n t try to reinstall the operating system?
  Try to boot from the Toshiba Recovery CD and check if it of possible to reinstall Windows.
  In addition I recommend access to the BIOS and try to pass the default BIOS settings.

• Satellite P300 PSPCCE: I want to delete or chang splash screen at startup

  I have laptop Satellite P300 PSPCCE and that you want to remove or change home screen starts to start the laptop.

  Is it possible to do? My Bios version is v3, 40

  Hello

  What you want to change?
  As far as I know, you can change the option of quick start or normal startup.
  Anything else is not possible.

  PS: this option should be available in the BIOS settings.

  Welcome them

• Satellite P300 - vertical red and white lines on the screen

  Hello

  Red and small white vertical lines ' pixels may 2 each) are appearing on almost all of my screen. Sometimes, if the background is grey or white (for example a box on a web page), the display is normal on this particular area and the lines are everywhere around. This is the second time that this has happened. The last time, it disappeared after a few days. My computer is a Satellite P300.

  What can I do?

  Thanks for your help.

  I understand this correctly?
  This problem appears on all screens: internal and 2 display attached external monitor?

  Well, in my opinion, this means that the graphics card may be affected. :(

• Satellite P300 - mouse gel and ATIKMDAG error - resolved

  If it helps someone...

  I had a problem with my Satellite P300... The mouse used to freeze from time to time for 3-4 seconds each time which was very annoying... and I used to occasionally get an error atikmdag.
  I searched the forums, but I couldn't find a definitive answer to my problem.

  Ultimately, here's what I did:

  I've updated the two anf BIOS ATI drivers and Vista (mine is homefamily premium 32). It seems that this has helped solve the problem ATIKMDAG. But I still had my mouse freeze from time to time. Someone told me I should try updating my audio drivers (Connexant) which I did and it worked. No more 'gel '.

  This means that these problems ATIKMDAG or mouse are not hardware issues because I was told first by technical services...

  Concerning

  Thank you very much for this report.
  As you know on the Internet you can find various forums where a lot of people are saying about error ATIKMDAG but offered solutions are different and will not help everyone. I'm glad to hear that your problems are solved.

  I have the Satellite P300 in front of me and I'm happy with it. After a year now, I still the original image of recovery preinstalled on it (of course changed a bit) and it runs great.

  Just a question: do you have maybe picked up info on the new Satellite P500? Great laptop with screen 18. I think that this will be my next. It you please?

• Satellite P300-16n - beep on startup error

  Hello

  I have a Toshiba Satellite P300-16n.

  Since a few days ago, it cannot start. In fact, when I press the power button, the screen is already black and I got a beep: one long and two beep short beep.

  I see on many sites that the graphics card is out. I would like to change the graphics card. Is it possible? Where can I buy a new graphics card? How can I disassemble the Toshiba P300?

  Thank you for your help

  nb91

  > I would like to change the graphics card. Is it possible? Where can I buy a new graphics card? How can I disassemble the Toshiba P300?
  Unfortunately it's the worst thing that can happen with laptop. In general the GPU cannot be replaced and when something like this happens all motherboard needs to be replaced.

  You can try to use Google and check if you can find something but it is unclear to me that you can buy a graphics card in some online stores. Maybe on ebay and without warranty.

  All this is quite complicated.

  Just for your info: http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

• Satellite P300-1 c 7 - impossible to install the audio driver

  Hello!
  I need help!

  I want to find the driver for the sound (Satellite P300-1 to 7, Windows XP). When I download the driver called "sound driver" of your site, my laptop gives me the trace message that the device for the driver cannot be found.

  Could you please tell me why this error occurs?
  Thank you.

  You have installed all the service packs for Windows XP?

  Satellite P300-1 c 7 belongs to the series PSPC4E then you have chosen the right model?
  Check again!
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Have you installed the chipset front driver?

• Satellite P300 - 1 c 9 - How long works the battery?

  Hello

  I was wondering if someone could let me know how long I should wait for the power of the battery on my satellite p300 - 1 c 9 to last?

  The laptop is now 11 months, again it only lasted a meager 1 hour, now its down to 44 mins which seems to be very short.

  It doesn't seem to be the point of a lot having a laptop that must be connected whenever you use!
  I talked to toshiba tech when he was nine and was advised to unload a few time completely to form it and he said he would get me another 10% (wow, a whole 6 minutes), which made no difference.

  look forward to hearing any suggestions.

  Angela

  Hello

  Sooner or later each battery will die and lose the own performance that s nothing unusual

  You should know that the battery working time depends on the use of the laptop.
  The battery much faster running high-performance applications that need many remedies of material.
  All parts of equipment must be able to! CPU, GPU cooling modules, display, etc.

  Reduce the brightness of the screen and set the CPU or GPU to lower performance in order to save the battery.
  You can do this in Win7/Vista power management!

  Here's a useful HowTo:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=41

• Satellite P300 - output HDMI does not connect to the model of TV Samsung LE32B450

  When I use the Toshiba "HDMI" out utility to connect my Satellite P300 - 19K to my Samsung LE35B450 TV, I get the message "it is only effective when the PC is connected to a TV set that supports HDMI control via the HDMI cable.

  Does anyone have a solution for this? My Samsung TV is newer and has 3 HDMI input jacks and the same result. Is there another driver from Toshiba not requiring this vibration control function? This seems hardly reasonable given that all I want to do is display & there is normally no 2 communication channels via a HDMI cable anyway.

  Thanks in advance for any help there.

  I m not 100% sure, but I think that in s manuals is described clearly that this tool is designed for use with Toshiba Regza TV. With other words, it is Toshiba specific function.

  If you want to have the photo on your standard procedure for TV use for this purpose connect the laptop to your TV using a HDMI cable, turn on the port HDMI (HDMI channel) on the TV and use the combination of keys FN + F5 to switch between laptop and TV.

• Satellite P300 - 19 H: I can't find the driver ATI 3470 for Win 7

  My model of laptop using VGA ATI mobi 3470.
  I can't find driver for Windows 7 on Toshiba support page. Please help me.

  I'm provisionally with the version of driver for Vista on Windows 7. Is this ok?

  Hello

  Several models of laptops that support this graphics chip, I recommend that you check the drivers released for other series of laptops equipped with the same GPU.
  As far as I know, these models use this chip:

  Satellite A300 PSAJ4E
  Satellite A300D PSAK4E
  Satellite A350 PSAL6E
  Satellite A350D PSALME
  Satellite P300 PSPCCE
  Satellite P300D PSPD4E
  Satellite Pro A300 PSAJ5E

  Hope that this could be useful.

  Welcome them

• Satellite P300 - one key works is not on the keyboard

  Hi all

  Someone has a proposed solution to fix a key works is not on my laptop? A letter on my keyboard 'letter b' has stopped working.
  Is the laptop Satellite P300 - "PSPCA-01U013.

  Thanks :)

  Hello

  Maybe there is no contact this button.
  As far as I know, you can not solve simple buttons. You can remove the key caps but I put that this problem is related to the plug defective or similar then it seems that you need to replace the keyboard.
  Keyboard can be ordered from Toshiba ASP in your country. If you have no experience in the replacement of parts, then I recommend asking a support technician.

  Good luck

• Satellite P300-05 x - keyboard is loose at the top right

  Hello

  I have a new Satellite P300-05 x and the keyboard is loose at the top right mainly between the 5 keys and the return key back.
  It's very annoying and he clicks on / noise when it moves up and down when I type...

  I'm sure its nothing to worry about but very annoying with a new laptop

  Someone at - it experianced cela and is this a simple fix?

  Thank you

  Dave

  Hello

  I didn t notice something like that on my laptop satellite but if you think that it s a really annoying issue then contact the ASP for control of the keyboard and the keyboard if necessary replacement.

  Good bye

• USB CODE 10 ERROR, complete the automatic entry in case of problem, problem keep after reboot...

  USB CODE 10 ERROR, troubleshoot automated, everything is OK, resart problem comes back after a reboot...

  What is the USB (type, manufacturer, make and model)? What version of vista are you using? The problem occurs if you start in safe mode?

  The following applies in some cases (I don't know if it applies to you but I don "t know the appliance, has no validation of the ccmplete and the message in its entirety (Word for Word), and I don't know if that's what you tried - but here it is anyway):http://support.microsoft.com/kb/933442/.

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  I hope this helps.  If this isn't the case, then when you have identified the device and answer the other questions, I have more specific recommendations.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• We get 0 x 00000704 error. "The specified port is unknown" during the installation of the printer software.

  Original title: error 0x800f0243

  I tried to install the software for my 9130cw mfc via a wireless connection and I got this error, followed by an error of 0 x 00000704.  "The specified port is unknown."

  Ive had no problem installing the rest of the printer on my other laptop... but now its giving me a problem on these new.  Any help is welcome

  Hello

  Please write to us.

  The question you are faced to could be due to incorrect settings of the printer.

  To better understand the issue, I want to know:

  1. What is the brand and model of your computer?
  2. Have you installed the printer software on the other computer via the wireless connection/USB port?

  Please, try the following steps and check if that helps.

  1. Press the Windows key + R key, type control, and then click Ok.
  2. In all the elements of the Control Panel, click on devices and printers.
  3. Then double click on Add a printer , and then choose Add a network, wireless or Brother MFC 9130cw printer.

  Feel free to write us again if you have other queries, comments or suggestions using your Windows.