Satellite P500 - freezing when inactive, the his and other questions

Similar Questions

• Satellite Pro A10: Error when loading the drivers and other things

  Hello.
  I just bought a spare A10 to ebay. I already have an A10 and the company. Powering up the new A10, I have a bubble message from microsoft saying that it was unable to load the drivers for the cd burning software, please update the drivers. If I click on the bubble it says to update of real player, roxio or other recording software.

  As I did not immediately and there not there when bought. Its not broken, its all just annoying. Also when I right click anywhere on the desktop, in the coloum that you see, I get a link to an adult site, how can I get rid of this?

  I want to thank you for taking the time to read this and would be grateful if you could help.

  Jack.

  Hi Jack,

  I suggest you to check what is actually underway when you start your new A10 using MSCONFIG. This will then stop these tasks that you do not want to be started up and should prevent your error message displayed.

  I also suggest you download and install a copy of AdAware http://www.lavasoft.com (and perhaps also http://www.spybot.info/en/download/index.html SpyBot) and do a check complete of your new A10 to remove any nasties that may be hiding there.

  It seems that if the previous owner has removed some of the software they had installed, but is not completely cleaned afterwards.

  Finally, I personally use a freeware CCleaner http://www.ccleaner.com/ for utility call which is excellent to remove the pieces left over on my laptop. It must be treated with some caution, because it is a powerful utility, but it is very quick and thorough.

  Kind regards

• Satellite Pro A300 freezes when on the internet

  Satellite Pro A300 freezes when on the internet & the only way to turn it off is to take out the battery. Bought new Dec 2010 & is under warranty - suggestions?

  Hello

  have you tried to update drivers Lan (wlan)? What browser do you use? I guess, the Internet explorer, try firefox or opera. Also, your computer may be infected with the virus, or blocked by the firewall. Have you installed software before it starts? Is this ok when you bought it? I ask you too, because you do not have a lot of information.
  It is especially the driver, software problem.

• 6.4 Lightroom is unresponsive and freezes when in the develop module.

  6.4 Lightroom is unresponsive and freezes when in the develop module, then I get the message (no response).  I have tried both checking and unchecking the checkbox use Graphics Processor.  It does not seem to make a difference. Lr6.4 getting slower more I use the develop module, then it stops responding all together.

  It could be a possibility that the old catalog might be corrupted.

  Please see the following article of the hardware requirements for Lightroom: system requirements for Photoshop Lightroom for Mac OS and Windows

• Excel crashing, freezing when using the spreadsheet

  Original title: Excel 2013 file size.

  Hello. I'm having a problem with Excel crashing, freezing when using the spreadsheet. I work on a PC with WINDOWS 7 SP1 64-bit, through a server that is running Microsoft SERVER 2013, WINDOWS 7 PRO 64 BIT SP1. We use 5 PC via all current server running the same version of operating system that use the spreadsheet and in most is used only by 3 PCs anywhere, anytime, even if EXCEL is not on the server, it is running locally on the PC.

  My guy TI tell me the spreadsheet while working on too big to 2 k! They keep asking us to reduce the size and to separate the workbook to solve the problem. Personally I don't believe a Word, we do not use formulas etc just cells with digital text and the alphabet.

  Now last year on the advice of our computer SCIENCE company, we have been advised to upgrade our server and our PC because terminals that they were getting their limit of operation which I accepted. These have been updates middle of last year.

  On this basis, I believe that society COMPUTER trying to throw dust on my eyes as I do not think that they provided the wrong material and are unwilling to admit it.

  Counsel on the question worksheet would be great I need to come back with some kind of evidence in support of my way of thinking.

  I hope that makes sense, I know a little but not professional!

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• What happens when "Still waiting for network when starting the computer and logon" is enabled and that the computer is not connected to the network?

  In MMC, I created the group policy and found through web search that computers with mapped network drives can connect better if "always wait for network when starting the computer and logon" is enabled...  So far, it has been very nice to have allowed.  Is no longer mapped network drives see the place as disconnected.  But what happens if the computer is not connected to a network?  Say the wireless router will turn off and your computer always 'wait... '. "turned on, should the user could still log the computer timely?

  Check these:
  Troubleshooting intermittent slow connection or slow start of http://blogs.technet.com/b/instan/archive/2008/04/17/troubleshooting-the-intermittent-slow-logon-or-slow-startup.aspx
  Priority and group policy processing
  http://TechNet.Microsoft.com/en-us/library/cc785665%28WS.10%29.aspx

• Hi, when using windows live, when in the chat and write the other answers of the person, but all that shows is a load of alphanumeric characters, for example, 13223d95-6618-11e0-a907-00248136cc7b

  Hello

  When you use windows live messenger, when in the chat and I write, other responses of the person, but all that shows is a load of alphanumeric characters, for example, 13223d 95-6618-11e0-a907-00248136cc7b. No idea of that which is causing this happens or a repair?

  Thanks in advance.

  Hello

  The question you have posted is related to Windows Live, and would be better suited in the Windows Live forum. Please visit the link below to find a community that will provide the support you want.

  Link: http://windowslivehelp.com/product.aspx?productid=2

• Difficulty for the inhibition of the mouse and other 'clicks' does not

  I followed the procedure described for the inhibition of the mouse and other clicks in Internet Explorer (model sounds, set Start Navigation and window block pop-up 'None', click OK), but the clicks continue.  When I call to the top of the window of his plan once again, the speakers are back next to Start browsing and Popup window blocked.  How to make it so that just listening to music is the only sound?

  Start > Control Panel > sounds & Audio > sounds tab and disable these windows sound you want / need.

  TO return to your pop-up windows, disable the blocker.

  By doing this, you can have a gogo advertising. That being said, if the site that you are using ActiveX controls for pop-up windows, you should get a choice to accept or decline their of this particular Web site (between the main window of IE and the toolbar).

  See you soon,.

  Jerry

• How to clean the fan and other components?

  Pavilion 1201tx g6.

  The ideal temperature for my g6 are as follows:

  

  Is it normal when the ambient temperature is ~ 28 degrees Celcius? (Location: Mumbai, India).

  Should I clean the fan and other components by disassembling g6?
  Please give me some official guide PDF or videos.
  My laptop is out of warranty. Technician of cleaned HP laptop and applied thermal paste 9 months ago.

  Please help, very important.

  
  ____________________________
  | Please hit Kudos, if I help you! |
  | |
  | WILL |
  |___________________________|

  Hello

  Please see the following article:

  http://www.PCWorld.com/article/2021499/how-to-clean-your-laptops-cooling-fans.html

  and video:

  http://www.YouTube.com/watch?v=0yyEVSkz_0M

  And the next book shows you how to open and close the machine:

  http://h10032.www1.HP.com/CTG/manual/c02770249.PDF

  Kind regards.

• I would like to know the "best practices" for unplugging my computer permanently to the internet and other updates.

  Thank you for taking the time to read this. I would like to know the "best practices" for unplugging my computer permanently to the internet and other updates. I thought I would do a clean install of Windows XP, install my Microsoft Works again and nothing else. I would like to effectively transforming my computer into a word processor. He continues more and more slow. I get blue screen errors, once again. I received excellent Microsoft Support when it happened before, but since my computer is around 13 years, I think it is not worth the headache to try to remedy. I ran the Windows 7 Upgrade Advisor, and my computer would not be able to upgrade. Please, can someone tell me how to make it only a word processor without updates or internet connection? (I already have a new computer with Microsoft Windows 7 Home Premium, it's the computer that I use. The old computer is just sitting there and once a week or so I updates.) I appreciate your time, thank you!

  original title: old computer unstable

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/install-Windows-XP

  http://www.WindowsXPHome.WindowsReinstall.com/sp2installxpcdoldhdd/indexfullpage.htm

  http://aumha.NET/viewtopic.php?f=62&t=44636

  Clean install XP sites
  You can choose which site to reinstall XP.

  Once it is installed, then you do not have to connect what anyone, however, some updates may be required to perform the work, test this by installing work and see if you get an error msg. Except that you should be fine.

• Why some items in 'Open an existing project' have just the name of the project and others have access to the entire file path?

  I have SP1 2012 LabVIEW and on the main screne of LabVIEW selecrt "show projects".

  Why some elements of 'Existing Open' (project) have just the name of the project and others have access to the entire file path?

  Examples of two lines in the list of projects.

  Ping.lvproj (with a path: C:\Users\mlevine\Documents\MPCE EQT\EQT Software\Ping.lvproj)

  C:\Users\mlevine\Documents\Common package Mission trainer (CMPT) \SUW Surface Warfare\Weapon permission Panel (WAP) \WAP LabVIEW Software\WAP fire authorization server 28 April 2015

  No chance, it's because I made a copy of this software and stored on a network drive power off and it went out of this network drive?

  So if LabVIEW sees two or more versions of the same software, he decides to use the name to differentiate between full path?

  I'd still rather it shows just the name of the project and if you hover over the name it shows the full path.

  Thank you

  Mark

  If you have opened a project of the same name from a different location, it is when it shows the full path both - in this case showing just the name of the project would not help because it would be the same thing!

• Java has been blocked because of the threat, I did the update, and other options to reactivate it ie.manual update reinstalls still websites like YouTube always used to load up. Works great in Chrome & IE!

  Java has been blocked because of the threat, I did the update, and other options to reactivate it ie.manual update reinstalls still websites like YouTube always used to load up. Works great in Chrome & IE!

  Your list of plugins in "Details of the system more" Watch 1.6.0_31 of next generation Java plug-in for browsers Mozilla for Java should not be blocked.

  Could you post a link to a Web page where Java does not work for you? YouTube uses the Flash, not Java. Here is a list of the test pages of Java that you can try to verify that Java works, of http://kb.mozillazine.org/Java#Testing_Java

  • Test of your Machine (JVM) Java virtual on java.com.
  • Java information - BrowserSpy.dk
  • Tester of Java - test to javatester.org pages will tell you if your web browser is enabled for Java and, if necessary, the Java version.
  • Java Plugin detector

  Moreover, I see in your list of plugins you also the VLC media player Plugin Web 2.0.0 so, it is possible that the VLC plugin is causing a conflict if YouTube or other videos do not work. See Fix common audio and graphics problems (you may have to disable the VLC Media Player plugin in the Add-ons-> list of Plugins for some media to play).

• I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3.

  I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3. That did not help.

  Hello

  1. What version of Windows are you using?
  2. What is the brand and model of the computer?

  I suggest to run the patch from the following link and check the status of the issue.

  Hardware devices do not work or are not detected in Windows.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  If the problem persists, I suggest you to send us more information to help you better.

• is it possible to have two different images in "develop" mode  I need to match the color and other image to the other.

  is it possible to have two different images in "develop" mode  I need to match the color and other image to the other.

  Select the reference image and choose window > secondary display > Magnifier (locked). Now the image you want to change, and start working. You can refer to the secondary display window while you work on the image you are editing,

  If you have a second monitor attached, the entire second monitor may be the secondary display.

• Sudden BSoD. Kernel Power event 41 task 63. And other questions...

  While many may be called from a previous thread, I have made, my monitor that's happened wobbly with will power during the boot. I have not solved this issue, by the by, but think it's time for a new monitor.

  However, today when I went to go do something else while leaving the start the computer to the top, I came back and (while the screen was still ongoing and disable this monitor because), I noticed he had a BSoD. I couldn't read anything on this screen because of the screen, so I restarted the computer (what makes the monitor stop acting in place). Entered the event viewer and had found it to be an event 41 task 63. Whatever it may be. So that's what I see in the critical error XML view:

  -

  -

   

    41

    2

    1

    63

    0

    0 x 8000000000000002

   

    153812

   

   

    System

    Xenomic

   

   

  -

    0

    0 x 0

    0 x 0

    0 x 0

    0 x 0

    fake

    0

   

   

  I don't know what it means at all, but what I'm collecting, event 41 is related to the PSU? But if it is the power supply, what block of POWER of the MONITOR (which I guess would be the problem as the monitor was going to power he has) or power supply of the current COMPUTER (which I really hope is not the case)? Or is it something else entirely?

  In addition to all this, I noticed that everytime I start the computer and run Core Temp to check the temperature, I often find it starts at about 50-60 degrees and rest around there until some good long minutes (about 20-40 minutes) before it comes down to temperatures that are easier to manage (30-40 degrees). I guess that's just the Tower need ventilated, but that would be linked to the sudden BSoD on boot to the top?

  Hello

  Thanks for posting your query in Microsoft Community.

  The problem may be caused for various reasons and to diagnose the problem, we can try the following methods and check.

  Method 1: Start the computer Safe Mode and check if the problem persists. If the problem does not persist in safemode, turn on your computer in a clean boot state and check.

  Step 1: Start the computer in Safe Mode

  Safe mode is an option of troubleshooting for Windows that starts your computer in a limited State. Only basic files and drivers needed to run Windows are started. The words Safe Mode appear in the corners of your monitor to identify which Windows mode you are using.

  Please refer to: start your computer in safe mode

  Step 2: Perform a clean boot in order to avoid any conflict of third party software.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Method 2: Please refer to the article below and try the advice given to solve the problem.

  Resolve stop (blue screen) error in Windows 7

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.