Save a "snapshot"?

Similar Questions

• Save all snapshots of history in the form of files

  I admit, I love save snapshots of history! Sometimes, I want to save them in a file later once the image has been closed.

  I wrote an action to save the 10 current snapshots on the files. It works fine with the following limitations:

  (1) she recorded only 10 snapshots (it is easily developed if necessary)

  (2) the snapshots must be named 'Snapshot 1', 'Snapshot 2"etc.

  This action does not work if the snapshot has a different name.

  Does anyone know of a script that is similar?

  Here is a sample of the recorded text action steps:

  Set: Save First 10 History Snapshots to File
    Action: Save First 10 History Snapshots to File
    Select snapshot “Snapshot 1”
    Make document
    Using: Current History State
    Save
    Close
    Select snapshot “Snapshot 2”
    Make document
    Using: Current History State
    Save
    Close
  

  This script will save all snapshots in a folder called instant out of the paths of documents, each file is saved as a jpg with the name of the snapshot file.

  #target photoshop;
  app.bringToFront();
  main();
  function main(){
  if(!documents.length) return;
  try{
      var Path = activeDocument.path;
      }catch(err){
          alert("You save your document before running this script!");
          return;
          }
  var doc = app.activeDocument;
  var now = doc.activeHistoryState;
  var Snaps = snapShotList();
  var outputFolder = Folder(Path + "/snapshots");
  if(!outputFolder.exists) outputFolder.create();
  for (var z in Snaps){
      revertNamedSnapshot(Snaps[z]);
      var saveFile = File(outputFolder + "/" + Snaps[z].toString().replace(/\./g,'_') + ".jpg");
      SaveForWeb(saveFile,80);
      }
  doc.activeHistoryState = now;
  };
  
  function SaveForWeb(saveFile,jpegQuality) {
  var sfwOptions = new ExportOptionsSaveForWeb();
     sfwOptions.format = SaveDocumentType.JPEG;
     sfwOptions.includeProfile = false;
     sfwOptions.interlaced = 0;
     sfwOptions.optimized = true;
     sfwOptions.quality = jpegQuality;
  activeDocument.exportDocument(saveFile, ExportType.SAVEFORWEB, sfwOptions);
  };
  function snapShotList(){
  var doc = app.activeDocument;
  var hs = doc.historyStates;
  var now = doc.activeHistoryState;
  var Name = new Array();
  for(var a =0;a 		   

• Impossible to save some snapshot due VM is being found

  Hello

  I use ghettoVCB for the virtual computer backup for my NAS & after a while some of the virtual machine are not been saved. So I had a quick glance in the script and went through a dry that gave me below output;

  / vmfs/volumes/4e7a4edb-08851e40-0C1E-1cc1de700f23/utils/ghettoVCB #./ghettoVCB.sh f vm_list.back d dryrun

  2014-04-12 12:15:46 - dryrun: #.

  2014-04-12 12:15:46 - dryrun: VM: GATEWAY

  2014-04-12 12:15:46 - dryrun: VM_ID: 7

  2014-04-12 12:15:46 - dryrun: VMX_PATH: / vmfs/volumes/datastore1/GATEWAY (192.168.0.1) / BRIDGE (192.168.0.1) .vmx

  2014-04-12 12:15:46 - dryrun: VMX_DIR: / vmfs/volumes/datastore1/GATEWAY (192.168.0.1)

  2014-04-12 12:15:46 - dryrun: VMX_CONF: (192.168.0.1) gateway / GATEWAY (192.168.0.1) .vmx

  2014-04-12 12:15:46 - dryrun: VMFS_VOLUME: datastore1

  2014-04-12 12:15:46 - dryrun: VMDK (s):

  2014-04-12 12:15:46 - dryrun: GATEWAY (192.168.0.1)-000001.vmdk 50 GB

  2014-04-12 12:15:46 - dryrun: VMDK (s) INDEPENDENT:

  2014-04-12 12:15:46 - dryrun: TOTAL_VM_SIZE_TO_BACKUP: 50 GB

  2014-04-12 12:15:46 - dryrun: Snapshots found for this virtual machine, please commit all snapshots before you continue!

  2014-04-12 12:15:46 - dryrun: THIS VIRTUAL MACHINE WILL NOT BE BACKED UP DUE TO EXISTING SNAPSHOTS!

  2014-04-12 12:15:46 - dryrun: #.

  I went in the connection of vSphere and had a looked in the VM's to see if snapshots are actually taken. But there is not, and I assumed that this is due to some files left during execution of the script. Alto! I found these delta files in the directory of the virtual machine. Below is the output;

  / vmfs/volumes/4e7a4edb-08851e40-0C1E-1cc1de700f23/Gateway (192.168.0.1) # ls-l

  -rw - 1 root root 33660928 Mar 22 03:53 GATEWAY (192.168.0.1) - 000001 - delta.vmdk

  -rw - 1 root root 358 Mar 22 02:45 GATEWAY (192.168.0.1)-000001.vmdk

  -rw - 1 root root 31741 Mar 22 02:45 GATEWAY (192.168.0.1) - Snapshot1088.vmsn

  -rw - r - r - 1 root root 23 5 March 2012 (192.168.0.1) GATEWAY - f9e7a482.hlog

  -rw - 1 root root 53687091200 Mar 22 02:45 GATEWAY (192.168.0.1) - flat hard

  -rw - 1 root root 8684 Mar 22 02:45 .nvram GATEWAY (192.168.0.1)

  -rw - 1 root root 515 Mar 21 06:28 hard GATEWAY (192.168.0.1)

  -rw - r - r - 1 root root 498 Apr 12 04:50 .vmsd GATEWAY (192.168.0.1)

  -rwxr-xr-x 1 root root 3626 Apr 12 04:50 .vmx GATEWAY (192.168.0.1)

  -rw - r - r - 1 root root 2862 Mar 12 07:28 .vmxf GATEWAY (192.168.0.1)

  -rw - r - r - 1 root root 44715 Mar 29 10:01 vmware - 41.log

  -rw - r - r - 1 root root 44666 Apr 5 07:08 vmware - 42.log

  -rw - r - r - 1 root root 44664 Apr 5 10:07 vmware - 43.log

  -rw - r - r - 1 root root 44712 Apr 8 05:20 vmware - 44.log

  -rw - r - r - 1 root root 44668 Apr 8 15:39 vmware - 45.log

  -rw - r - r - 1 root root 44693 Apr 9 06:34 vmware - 46.log

  -rw - r - r - 1 root root 44673 Apr 12 04:50 vmware.log

  -rw - 1 root root 47185920 5 March 2012 vmx-GATEWAY (192.168.0.1) - 4192707714 - 2.vswp

  This is the max that I can go to and I wanted to do not remove or change anything. What can I do to fix this?

  Hello

  The script is OK, you have files of snapshot down there.

  In vSphere Client or web client, choose "Consolidate" to get rid of them and does not change your virtual machine.

  --

  Wil

• Save a version of a design using a snapshot error

  When I try and save a snapshot by using the file Menu, choose the option to snapshot, the new option is grayed out. My BP is in draft mode and I'm introduced in Admin mode.

  We are currently using version 10.0.4.0 (b-09252014-01).

  Hello HCamey,

  Are you the owner of BP? According to this Doc ID 2026138.1 , you must be the owner of the BP to create a snapshot.

• First has a function of snapshot as After Effects?

  Hello

  I use After Effects SHIFT - F5 to take and display snapshots all the time. But first have an equivalent? I know I can use the camera icon to SAVE a snapshot, then import it, then view it, but this seems really bulky. I do a calibration of the colors in the first and you want to store and discovers a frame of reference at the touch of a button, just like I would in AE. I searched around but still just results of After Effects!

  Thanks in advance for your suggestions.

  ~ Paul

  Lol you can apply here:

  Feature request/Bug Report Form

• How to back up and restore snapshots?

  Hey geniuses,.

  Must I increase the size of the disk of a VM XP under Fusion. It seems that I have to delete all the snapshots before I can manipulate the disk size in the settings. I want to save these snapshots however and have them available for use in the future.

  Can I just copy the package files in a different folder on the MAC, delete stereotypes by the merger of interface and copy the files to the package VM, if I need to go back to one of the photographs in the future? Or y at - it another way to save those snaps if I need a day?

  Thank you very much

  Tony Costa

  [email protected]

  It seems that I have to delete all the snapshots before I can manipulate the disk size in the settings.

  Fix. Note you will also need to expand the partition on the disk.

  Can I just copy the package files in a different folder on the MAC, delete stereotypes by the merger of interface and copy the files to the package VM, if I need to go back to one of the photographs in the future?

  N ° incremental snapshots are, they rely on previous changes. If you change the basic disk, snapshots are no longer valid.

  See also http://blogs.vmware.com/teamfusion/2008/11/vmware-fusion-3.html

  Or y at - it another way to save those snaps if I need a day?

  With the merger and the virtual machine does not, I would just make a backup of the entire virtual machine.

• bookmarks vs Pocket

  What is the difference between using bookmarks instead of Pocket? How are they different? Thank you!

  Bookmarks are stored locally on your computer in your Firefox configuration. By clicking on a bookmark will bring you back to the address that you have registered, loading the page currently available there (in other words, a bookmark is not a copy of a page, it's just a URL). Bookmarks usually accumulate in chronological order, and you can group folders of information. Using the Sync feature, you can share them with other copies of Firefox you have installed on the desktop computer, laptop or Android devices that support Firefox. However, you can access it using other browsers.

  The Pocket is a service based on the web with features to simplify the web pages for easier reading. Addresses that add you to Pocket are stored in the cloud by a company called Read It Later (with its own privacy policy). You can access the pages stored in the Pocket using Firefox or another browser, on a wide range of devices. The addresses are displayed in a reading more friendly than the traditional favorites list format.

  Pocket offer a paid subscription service that allows to save a snapshot of the page active at all times (otherwise, like a bookmark, if a site deletes a page, the address registered in the Pocket is more useful).

  Edit: This site has a bunch of items to help on the Pocket. You can start here and follow the links below for more information: save pages for later with Pocket for Firefox.

• disc

  I have problems with the use of the disc reports.

  The purpose of this storage tab reports about 470 GB used Mac however programs such as OmniDisk, DiskInventory X and can only find about 350 GB used.

  Where is the 100 + GB of storage? How can I recover this storage?

  There are differences in how, use of memory is reported by different applications, even within these methods that are provided by Apple.

  For example, if you use Time Machine to back up your MacBook when you are not connected to TM, the MacBook saves temporary snapshots of your drive. This spell if you need the storage space for something else. But some methods list that also used storage, while others list it as free, because it will become free if you need.

• How can I make my short right click again?

  Before, when I used to right click anything (be it to copy, URL link, etc.), the right click menu would be short with a few options, such as cut, copy, past, reloading, view background information, etc.

  But today, when I right click something, I still get the annoying long right-click menu which has many options of ridiculous, like 'save the snapshot as', play, make a pause, silence, reactivate, show controls, hide (and maybe more 20 more).

  I do not like that and not my contextual menu bar short. How can I do so?

  Problems with a massive menu have been reported as posed by Firebug, so make sure you update to the latest version of Firebug.

• incompatibility of paperback page layout projects?

  Hi - I just finished a project of 20 pages in the Photos app (version 1.3 (350.23.0) on an older MacBook Air with OSx 10.11.2.) My question is how a flexible cover project looks in the application or in a PDF "Preview". I admit I have not received my order, but I still wanted to check with the community on an inconsistency, I noticed. What you see in the project and which is made in a PDF file (evidence / preview) are different.

  In project of soft cover, we know not if the inside the cover page is empty or full. I'll know when my books arrive. I hope that the answer is Yes. However when you save a "snapshot" of the book in PDF format, it does not create a blank page in the page layout.

  Layout in the app picture was as follows:

  Cover image

  Blank (no image / text allowed)

  Page 1

  -(I wanted to intentionally juxtaposition page 2 & 3 to be next to each other)

  page 2

  page 3

  ----

  page 4

  page 5

  Thus, in the export PDF of a paperback book, page 1 is inside the cover & page 2 is next to him. This breaks the presentation expected that you see in the photo/project application.

  Thank you

  Peter

  the book is printed using the layout of standard book - odd numbered pages on the right and on the left - this is why it is necessary for an even number of pages

  LN

• SSD upgrade/migrate inside 23 tilt of HP Envy TouchSmart?

  (model: 23-k001hk all-in-One)

  Hello all - asking for suggestions advice from wise and kind people on the best way - and operating instructions - for upgrading the speed of my current hdisk 1 TB + SSD 16 GB cache scheme of HP storage by one of these itineraries:

  1) upgrade the disk installed cache 16 GB SSD mSATA disk (limit Intel RST) 64 GB mSATA

  Why: I update regularly a slap (10-15GB) of data from the Agency.

  so given that the daily volume of modified files is comparable to 16 GB,

  I'm assuming that a larger cache will actually add value

  (2) install an SSD 'broad' to serve the main startup disk by replacing

  the existing hdisk of 1 TB (I use a tiny fraction of it) with a 2.5 SSD "

  with a suitable support (and deleting or disabling the 16 GB SSD disk cache)

  Thanks in advance for any advice on this point, HP does not have any information on that, nor any obvious way to access or review the settings of the RST (firmware?) used in their SSDcache + hDisk arrangement (Yes, tried Ctrl-I, the boot, etc.-no joy).

  -Rob in Hong Kong

  Hi WAWood,

  A late thank you for your advice. Based on this feedback and having discovered just that software ExpressCache 'hidden' on my system quietly stopped working after the upgrade to Windows 10 (and HP support does not currently have updated software ExpressCache for Windows 10), I decided to install a large SSD drive and use it as a boot drive.

  In the this could help other all-in-One HP Envy owners tilt, here is a summary of the steps that worked with obvious disclaimers that even if it worked for me, it is not a 'universal' solution and also that if you mess with the hardware/software of your system, you are of course on your own, without guarantees or responsibility for this author) :

  (also, my apologies for the format - in a hurry)

  System:

  HP Envy tilt (23-k001h model) running Windows 10

  Basic purpose:

  Change the original storage configuration:

  Hdisk (boot drive) 1 TB + 16 GB mSATA SSD cache ("linked" to the hdisk via ExpressCache)

  TO:

  Hdisk (spare drive) 1 TB + new Samsung Evo 850 mSATA SSD 500 GB (as boot drive)

  Result

  Many, many "zippier" system: QuickStart, app launch, etc..

  Measures

  Disable ExpressCache

  (HP Envy models tilt seem to use this supplement Windows 3 rd-party, instead of Intel RST):

  In my case, as my recent visit to Windows 10 has taken care of this for me (haha), I don't have to do;  Otherwise, I guess we should stop the ExpressCache service, uninstall the software from ExpressCache and/or drivers, then reboot - suggest you only look it up in the forums, because I can't offer my own experience on this one.

  Clear/unloading as much unnecessary data from drive C: (1 TB hdisk) as possible.

  The goal would be to have used space on C: be greatly below your 500 GB (or other) new drive (in my case, I cut the used space on the C: 100 GB).

  Also a good idea to run the defrag Windows on C:, as may be useful (necessary?) for the reduction of this partition in the next step

  Disk management Windows allows you to shrink the Windows partition (mapped as C

  Goal: you want a net size of all partitions on hdisk (Windows + hidden/recovery/system partitions) to be a little less than the actual size of your new SSD (my "500 GB" SSD was actually more as 465 GB)

  Warning: disk management can claim "not enough space" to shrink Windows (C when it's clearly not partition so - in my case, the problem was due to my Windows partition is not the last partition on the disk before the unallocated space (if any) - obviously this disrupts the management of disks.)  If so, you need to move partitions using a 3rd party soft as AOMEI (free app - has worked well for me) all for the Windows partition is the last partition on the hdisk, with unallocated space located immediately after the Windows partition.

  Result: when the dust settles, the partitions allocated on your hdisk must have a net size which is comfortably at less than the actual capacity of your new SSD (in my case, the partitions was 440 GB on a capacity 465 GB SSD).

  Physics card mSATA SSD upgrade

  • Power PC, unplug from the mains and remove the rear plastic cover:
  • http://support.HP.com/in-en/document/c04100400
• Remove the metal shield covering the RAM:
  • http://support.HP.com/us-en/document/c04007922 (only the first 3 steps)
• Remove the metal shield covering the motherboard:
  • Locate/remove the 3 screws holding it down.
  • Lift on board as possible shielding at the booth of PC;
• Locate the SSD of origin (see tiny map labeled as SanDisk or some of these) and remove 2 tiny screws to attach to the motherboard.
• While keeping you constantly connected to the Earth (strap, touch metal chassis, etc.):
  • gently remove original SSD and save it in some static container (if upgrade fails and you want to restore the system to the original state of the material)
  • Gently insert the new card in lateral connector mSATA SSD,
  • and to the motherboard with the same 2 live
• Replace the motherboard of armour, armour of RAM and plastic cover

Check the new SSD 'visible' to the BIOS:

At first startup, use ESC to enter the BIOS settings, then check that BIOS 'sees' the new SSD as the original hdisk

Clone all partitions on hdisk--> new SSD

Start & connect to Windows and use Macrium Reflect (free) to clone all the partitions on hdisk for the new SSD - see large portico advice to:

http://www.howtogeek.com/199068/how-to-upgrade-your-existing-hard-drive-in-under-an-hour/

Do not forget:

• Suggestion from the link above, you must first a Macrium recovery disk
• You can clone * all * the partitions on the SSD's original hdisk

Result: cloned partitions now visible on new SSD. may have little extra/no allocated space on SSD (can deal with that later)

In the BIOS change the boot to new SSD drive

Reboot PC, press ESC to enter the BIOS to change the boot order:

• make the first boot drive in SSD
• also suggest to disable booting from originals hdisk (night before you really start SSD)
• Save the BIOS settings and exit the BIOS

Make sure that you have started of SSD and clean the unwanted drive mappings

Start & log Windows

(the fact that you can reach this point means that you have passed the first test)

Use Windows Disk Manager to

* ensure that C: is mapped to your new SSD.

* make sure that you can still see original hdisk, too

* suggest remove you mappings of unnecessary letters drive

(with the exception of the C: drive!) for all other partitions on hdisk or SSD

Test through full reboot

As a further test, do a reboot of Windows to make sure there are no problems with the start-up of SSD; again, once in Windows, use disk management to check again once your C: drive is the partition on the new SSD

Optimizing Windows SSD

There are several Windows setting changes that you should do when your primary/boot disk is an SSD, either:

• If you have purchased a Samsung SSD, you can download/use their app "Samsung magician" to do so (see "Optimization of OS" section), or
• Google "Optimizing windows 10 ssd" to find any number of guides to achieve this, such as:
  • http://www.disk-partition.com/Windows-10/SSD-optimization-Windows-10-4348.html
• Note: one of the most important changes are those related to mode AHCI (ability to GARNISH)
• Note: some suggested parameters cannot be 100% essential, for example:
  • pagefile on SSD: some authors suggest no page on the DSS file, others say "keep" small'(?) "; most compelling advice I've seen are to retain the page file on the SSD, but let Windows manage the size; in all cases, should make sure that your system has * sufficient * RAM (8 GB and more) for your usage requirements.
  • 'leave free space' (aka overprovisioning): SSD experts suggest that current-technology SSDS, it is not necessary
  • "do not defrag": 10 Windows recognizes SSD and disable defrag automatically

All the problems?

Note that at this point, you still have your original hdisk with windows/data for a few days, so if this migration does not work, you can always go back by turning off the SSD and change the startup disk (in BIOS) originally hdisk

After a few days: some cleaning

When you are reasonably comfortable that your system is booting from SSD and Windows/apps work correctly, you can perform the following operations:

• Use Macrium Reflect (free) or similar to save a snapshot of your current partition SSD
• After the backup, delete old/unnecessary partitions on original hdisk. For some, drive management works; others may need to resort to using the command line program Admin "diskpart" (read the instructions carefully!) and use "Delete Partition Override" (be very sure that you have selected a partition on the * original hdisk * (IE, 'old'))
• Disk management allows you to create a new simple volume on hdisk original now empty, as a reader of alternative utility
• Regular backup of SSD Annex: SSDS, as with mechanical parts, will fail - it's only a matter of time. It 's going to happen. Thus, strongly suggest that you configure regular (daily) snapshots of your SSD partitions. Again, I use Macrium Reflect to do this with a full backup weekly + differential daily backups and save the images in the now empty original hdisk in the PC
• If your SSD has any sense space not allocated, you may want to expand the Windows partition on the SSD drive use disk management to make use of this space

• The web publishing tool to send data to an external web server?

  We have a customer who wants to be able to see the LabView to test the results of their office. At our office is located behind a firewall and, therefore, to allow access to the web server or something else would have open access to the outside world and I don't want to do that. Can the web server web publishing LV tool publishes to be external to the Organization? For example, you will need to use FTP credentials to access the external web server? Any information would be greatly appreciated.

  Hello

  I don't see a way to do it with remote façade panels. However, you can take a snapshot of your façade periodically and save it to the FTP server. In this way, the results of the tests are available on the FTP site.

  To save a snapshot of the façade, you use the VI reference (functions > programming > Appilcation control > reference VI Server), invoke the node (functions > programming > Application Control > node call) and the VI 'Write the JPEG' (functions > programming > graphics & Sound > graphic Format > write the JPEG file). VI reference to the reference of the thread invoke node entry, choose the front > get the Image method, and then wire the data output of the Image to write JPEG file VI to save it as a JPEG file on the FTP server.

  I hope this helps.

• I declined 1 to using windows 7 and then I was give ruined it a new name, but drive it now it's not allocated space.

  * Original title: Partition

  Hello

  I got a new hard drive and I tried to create a new partition on it.

  I declined 1 to using windows 7 and then I was give ruined a new disk name, but there say now that it is unallocated space and the top line is now black instead of blue and it won't let me give it a new name.

  So, I now have to do to get this space as a new section of road.

  Thanks for your help.

  He said now there is unallocated space and the top line is now black instead of blue and it wont let me give it a new name.

  You must format the partition until you can give it a name.

  If that fails, use snippingtool.exe to create a snapshot of the Disk Manager. Save the snapshot on your desktop, and then attach it to your response.

• Cannot remove the 2 boxes on the screen

  Two boxes appear on the screen (1) containing a BRIGHTNESS BAR 100 showing

  (2) containing one Menu, Auto and 3 others unnamed

  I can't delete these two boring boxes.  The mouse glides UNDER the boxes and has no effect.

  Have tried to use the mouse movement figure to clear, remove or access the menu successfully

  Any suggestions please

  Are the boxes when you start the computer in Mode safe?

  It would be useful if you have run snippingtool.exe to create a snapshot of these boxes. You must then save the snapshot to the desktop, then attach it to your response.

• Can't download data to CSV

  I am in the custom user interface metric graph and I don't see the icon for me to download to CSV.

  I see only the following icons:

  "Save a snapshot."

  "Save a snapshot of full screen.

  See picture attached.  What I have to do something to make the icon is displayed to download to CSV?

  Turn on graphs to split... at the moment you view the graphic line. Then, for each individual measure, you can dl the csv file.