Save data from 0 seconds

Similar Questions

• How to save data from the COM port to file?

  Hi all

  can someone tell me please how to save data from the COM port on file? I transfer 1 byte of serial port... attached is the image of the vi... very basic.

  I would like to save the data in a table... I mean, 1 data--> data--> data tab 2 tab 3rd--> tab

  and so on... can anyone help?

  
  

• can I import data from my second computer to my first

  I created the original account in my new installation of windows 7. I'm trying to import bookmarks and settings from my old installation of xp. both installations of firefox are 32-bit. I use a dual boot system. I can't get my windows 7 installation to import the settings out of sync. Why not? The main computer can pull the synchronization of the secondary image?

  See this support article:
  
  http://support.Mozilla.com/en-us/KB/recovering+important+data+from+an+old+profile

• How to save data from the RT at base of remote Citadel using Citadel api writing

  I try to get a target RT to launch a VI when it is started, which acquires the data and sends them to a database of Citadel on a networked computer.

  I'm doing it with the Citadel write API, more precisely the functions in the DSC module; Open the trace and write trace close path.

  I have a project with the added goal of RT. I have a simple VI under job-generating data and sending it to the local database of the Citadel. This VI works very well and the data is written to the database. However, I have a similar VI under the RT target but open VI track is broken and the VI will not run. It seems that one of the subVIs in Open Trace VI is broken and will not run.

  I'm missing something here. Can someone help me understand this?

  The VI is probably not compatible with real-time, perhaps she calls a DLL or something. What you need to transfer data from RT on a Windows host computer and let that host the insertion in the Citadel.

  Mike...

• How to save data from users

  I have a dell inspiron with windows 7. There are two users, I would like to make a backup copy of one user data how can I do this?

  Open the C:\Users folder and make a copy of any file that you want to duplicate from inside the folder of the user.

• How can I delete data from a second hand phone?

  My son gave me his old iPhone and I added my sim card but I see its contacts and data, how to go on the withdrawal of its data and addition of mine?

  Here you can find useful information How to erase your device iOS and then set it up as a new device or restore backups - Apple Support

• Deletion of data from the second Partition Windows Vista user?

  Several months ago, I had difficulty removing and installation of Norton 360 on my sysem of Window Vista (SP2) on my laptop HP G70.

  I called support and they wanted me to create a second user (MARKNEW) and try to install on the second user account...   It did NOT work, so that we actually went back to the original and found the problem user and have installed correctly...

  Once the problem has been resolved, I went to control panel, user accounts and deleted the user MARKNEW id.

  I recently delete a program that has been installed as a system check and was looking at my C: drive to ensure that all components have been removed and USER directory, I found the remains of the MARKNEW user ID.   Although some of the entries looked like pointers to the current files, some of the files in appdata/local had actually used in space...    Can I remove these or which will cause another problem?

  Can I delete or remove the whole MARKNEW?

  Can / could R.click C: HD, open, locate user accounts, delete the old user folders.

  Also, the support of people kind of had good things, but the extent of the performance pc's, instead of

  another partition on C: or a different user account, you should / could be running the software/storage etc.,.

  on a flash drive. This eliminates the fragmented amounts that go into C: by default flash player suffers...

  In addition, a good flash drive increases performance, & little expensive

• This program of windows xp is on a Macbook Pro with a PC emulator. The drive needs to be replaced. How can I save the data from the side PC?

  This program of Windows XP (my wife) is on a MacBook Pro with a PC emulator (Bootcamp).  The drive needs to be replaced.  How can I save data from the PC to an external hard drive?

  Hi Alan,

  Thanks for posting in the Microsoft Community.

  I understand you are trying to backup the data on external hard drive since you replace the hard drive.

  I will definitely help you with this.

  Please visit the links; This should help you in files and backup files.

  How to use the backup utility to back up files and folders in Windows XP Home Edition

  http://support.Microsoft.com/kb/320820

  http://support.Microsoft.com/kb/308422

• Aggregation of data from multiple sources with BSE

  Hello
  
  I want to aggregate data from multiple data sources with a BSE service and after this call a bpel with a process of construction of these data.
  1 read data from the data source (dbadapter-select-call)
  2. read data from the data source B (dbadapter-select-call)
  3 assemble the data in xsl-equiped
  4. call bpel
  
  Is this possible? How can I get data from the first call and the second call to conversion data? If I receive data from the second call, the first call data seem to be lost.
  
  Any ideas?
  Gregor

  Gregor,

  It seems that this aggregation of data is not possible in the BSE. This can be done in BPEL too using only assigned but not using transformations. I tried to use transformations by giving the third argument to the function ora: processXSLT. But couldnot get the desired result.

  For more information on the passage of a second variable (of another schema) as a parameter to xslt pls refer to the post office

  http://blogs.Oracle.com/rammenon/2007/05/

  and the bug fix 'passage BPEL Variable content in XSLT as parameters'.

  Hope this helps you.

  Thank you, Vincent.

• Save and write data from table to table - easy

  Hello

  I got this system delivered to me. I'm new to LabView and just save the data from the table "average voltage" (inside the while loop) to do some additional testing of our product.

  I will like to do similar to this.

  (1) save in excel file.

  (2) save only when a button button and save it then 5 ilteration.

  (3) save and manipulate the data, so it is displayed in 6 columns (each LED 1) instead of 1 long colum.

  I tried different things with structure business T/F, which resolved the buttom-request. But I am in doubt I should use, writing to the file of the measurement or write to us to the worksheet (by using labview 15.0)-delimited according to my offer the best possible?

  He also seems to be too much to handle when I try to write in txt file, because it pops up with and error that I do not know how to fix, but it says this:

  Error-200279

  Possible reasons:

  The application is not able to cope with the acquisition of equipment.

  Increase in the size of buffer, most frequently the reading of data or by specifying a fixed number of samples to read instead of reading all available samples would correct the problem.

  Property: RelativeTo

  Corresponding value: current playback Position

  Property: Offset

  Corresponding value: 0

  Task name: analog channel

  Thanks in advance

  I agree with Taki, but want to make some additional remarks:

  • LabVIEW is a data flow language.  Think of the "flow" of your data.  You talk about "save only when a key is pressed" and a finite set of data.  You are collecting before the press the button and everything just do not save?
  • Data are collected at some rate, and likely, you don't want to "Miss" data points.  This means that you shouldn't do anything in the loop of the Collection that takes a long time.  If your recovery rate is low and your treatment is fast, you can have everything in a single loop.  Otherwise, to use the technical stream (producer/consumer is a good) to process the data in a single loop in parallel with the collection in a loop independent (and asynchronously).
  • How do you write your data?  You want to write "on the fly", as it is, or can you wait, collect everything, any format and then write it "all at once"?
  • What do you mean by 'save the file in Excel?  Do you mean a 'native' Excel file, one with the extension .xls or .xlsx?  Do you mean a Comma-Separated Variable (.csv) file this reading peut of Excel (and, indeed, usually registers itself to read, change the icon of the .csv files to "look like" it is really an Excel file)?  If the first case, I recommend using the report generation tool.  But for the latter, you can also use write delimited spreadsheet, which can be easier to use.

  Bob Schor

• Is it possible to save a part of the data from when you press a button 'save '?

  Hello

  The attached vi below acquires data from a sensor. The signal of the sensor output can be set to zero and the data stored in a file. However, the saved data includes the portion of data when vi starts to run until you press the stop"" button. Is it possible to save the data game from when 'save' button until the button "stop"?

  Best regards

  Ninjatovitch

  This should be at 8.2

• The lateset, 2015.5 edition, does not transfer data from the metadata, only the focal length objective. Disappointment when you want to know what that lens you used. (It allows to rename the files but after you create a second copy. "It's an improvement.)

  The last edition, 2015.5, does not transfer data from the metadata, only the focal length objective. Disappointment when you want to know what that lens you used. (It allows to rename the files but after you create a second copy. "It's an improvement.)

  Yes, copied files from Nikon NEF, DNG.

• How to connect sql database to esxi to save all data from the virtual machine

  How to connect sql database to esxi to save all data from the virtual machine

  Please provide steps

  In simple terms, you cannot connect ESXi to SQL. Connect a vCenter SQL (Windows only).

  If you want to save all the data that is contained in your virtual machines, I suggest a backup solution.

  Suhas

• I need my Vi to save only one point of data every 30 seconds

  Hello

  I have trouble getting my VI to make only one point of data every 30 seconds. I collect a couple and the temperature. If you take a look at the queue of lvm, you will see that I have two data points every 30 seconds. I want only the VI to take one. I can do this by going to the DAQ assistant and change the mode of acquisition of N samples 1-sample (on request), but if I do this I am not able to see my couple of graph in real time.  In addition the VI takes data about every 30 seconds. Is there a way I can strengthen this also?

  1. change your graph of couple to be a graph.  A graph has a history associated with him, so he keeps old values in a circular buffer for you.  A chart shows just the last thing written in it.

  2. change your sample of Compression to be 64.  It is currently set at 30, which means that you will end up with 2 samples in your data.  That's why you write 2 samples when write you it.

• global variable functional to read and write data from and to the parallel loops

  Hello!

  Here is the following situation: I have 3 parallel while loops. I have the fire at the same time. The first loop reads the data from GPIB instruments. Second readers PID powered analog output card (software waveform static timed, cc. Update 3 seconds interval) with DAQmx features. The third argument stores the data in the case of certain conditions to the PDM file.

  I create a functional global variable (FGV) with write and read options containing the measured data (30 double CC in cluster). So when I get a new reading of the GPIB loop, I put the new values in the FGV.

  In parallel loops, I read the FGV when necessary. I know that, I just create a race condition, because when one of the loops reads or writes data in the FGV, no other loops can access, while they hold their race until the loop of winner completed his reading or writing on it.

  In my case, it is not a problem of losing data measured, and also a few short drapes in some loops are okey. (data measured, including the temperature values, used in the loop of PID and the loop to save file, the system also has constants for a significant period, is not a problem if the PID loop reads sometimes on values previous to the FGV in case if he won the race)

  What is a "barbarian way" to make such a code? (later, I want to give a good GUI to my code, so probably I would have to use some sort of event management,...)

  If you recommend something more elegant, please give me some links where I can learn more.

  I started to read and learn to try to expand my little knowledge in LabView, but to me, it seems I can find examples really pro and documents (http://expressionflow.com/2007/10/01/labview-queued-state-machine-architecture/ , http://forums.ni.com/t5/LabVIEW/Community-Nugget-2009-03-13-An-Event-based-messageing-framework/m-p/... ) and really simple, but not in the "middle range". This forum and other sources of NEITHER are really good, but I want to swim in a huge "info-ocean", without guidance...

  I'm after course 1 Core and Core 2, do you know that some free educational material that is based on these? (to say something 'intermediary'...)

  Thank you very much!

  I would use queues instead of a FGV in this particular case.

  A driving force that would provide a signal saying that the data is ready, you can change your FGV readme...  And maybe have an array of clusters to hold values more waiting to be read, etc...  Things get complicated...

  A queue however will do nicely.  You may have an understanding of producer/consumer.  You will need to do maybe not this 3rd loop.  If install you a state machine, which has (among other States): wait for the data (that is where the queue is read), writing to a file, disk PID.

  Your state of inactivity would be the "waiting for data".

  The PID is dependent on the data?  Otherwise it must operate its own, and Yes, you may have a loop for it.  Should run at a different rate from the loop reading data, you may have a different queue or other means for transmitting data to this loop.

  Another tip would be to define the State of PID as the default state and check for new data at regular intervals, thus reducing to 2 loops (producer / consumer).  The new data would be shared on the wires using a shift register.

  There are many tricks.  However, I would not recommend using a basic FGV as your solution.  An Action Engine, would be okay if it includes a mechanism to flag what data has been read (ie index, etc) or once the data has been read, it is deleted from the AE. 
  
  
  There are many ways to implement a solution, you just have to pick the right one that will avoid loosing data.