Save the transitions as elements?

Similar Questions

• Could not save the different string value to each element of the array

  I have a configuration of VI to read several channels Veristand project.  The entrance is a table 1 d of channels, (an element for each channel, I want to read).  The channels have different names, each of the elements in the chain must be different.  I am able to edit each item and run the VI, and it works fine.  However, if I save, close and reopen the VI, all elements show the same value (what happens to the value of the last element for which I defined a default value).  Is this behavior planned, or have I missed a configuration setting which would allow different string values?  Please notify.  Thank you.

  GSinMN

  Make sure that you select the table and not only one item when you right click-> set by default on the front panel.

• If I'm working on a project in a free trial of Premiere Elements, and then save the project (do not export it) and open it again in the full version of Premiere Elements, the watermark will be removed?

  If I'm working on a project in a free trial of Premiere Elements, and then save the project (do not export it) and open it again in the full version of Premiere Elements, the watermark will be removed?

  If you have made the timeline or out of a movie from the trial version, it will have this watermark on it.

  Once you have purchased and activated the software, you can remove the watermark by going to the folder directory on your computer where your project files are saved and deleting the folder Adobe Premiere elements preview files.

• Save Styles in the first 14 elements

  Hi,  I have been using Adobe first Elements 9 for 5 years now. I've downloaded a trial version of the first items 14 Elements 9 I understand how to record Heading Styles, i.e. - types of fonts, font sizes, colors of fonts for a repeated on different videos use. I can't understand how to do this using adobe and 14 is just a nightmare. Can you help me?

  billcpv

  1. text Menu/new text/Default Text... Create the title of your text in the text of titration Section... Select the text.

  

  2. go in the Styles Section of the titration module and right-click on one of the Adobe Styles, select and click on save the Style in the drop-down menu that appears. In the Save Style dialog box results, name the new style... I chose my special Style. OK to get out of there. This special My Style will be placed down the Adobe Styles in the Styles Section of the module of titration. The user created Style will look like the screenshot below

  

  If you want to make My special Style the Style by default, right click on its thumbnail in the Styles Section of the titration module and select

  Set the default Style.

  Please consider and then let us know if this worked for you.

  Any questions, feel free to ask. I would say that you close reopen the module titration after going through this routine to check your success.

  RTA

• Cannot save file \resource < labview > element to the previous version

  Hello

  I have a quick fall plugin written in LabVIEW2013, without any new feature.

  I am recording this plugin in the previous version, but I get this message: "unable to save the items in the \resource folder to the previous version.

  Even after the removal of the entire contents of my VI, I get the same error...

  What is the problem with this resource file?

  With previous versions of LabVIEW, I was able to do it without any problem.

  Thanks for your advice!

  So OR locked.  Simply copy the VI on your desktop and then register for precedent.  I can understand why they would want to prevent you from doing this since so many things change from one version to the other.  But this is all new for 2013 (just tried with 2012 and it was fine).

• Save the contents of the form elements in a txt file

  
  Hello

  I am trying to save the contents of the form to a text file by clicking on a button. For example, in my form, I have 4 text boxes

  1. client code

  2 Subscriber

  3. customer name

  4. customer name

  There is a backup button in the page. Once I click on save button, I get a download prompt to save the file (txt file). The txt file must contain the values of the fields in each line. Can we achieve using Apex?

  Thank you

  TJ

  Hi TJ.

  Yes, its possible. For this you must use a bit of PL/SQL Code.

  In the page, you create a branch;

  Branch point = to present: after the treatment (after calculation, Validation and treatment);

  Type branch = branch of PL/SQL procedure

  And the branch code, you have to have something like this:

  declare

  CLOB v_clob;

  v_blob blob.

  dest_offset NUMBER: = 1;

  offset NUMBER: = 1;

  amount INTEGER: = dbms_lob.lobmaxsize;

  blob_csid NUMBER: = dbms_lob.default_csid;

  lang_ctx INTEGER: = dbms_lob.default_lang_ctx;

  caveat INTEGER;

  V_LENGTH NUMBER;

  Start

  DBMS_LOB.CREATETEMPORARY (v_clob, true);

  DBMS_LOB.CREATETEMPORARY (v_blob, true);

  v_clob: = ' ID: ' | : PXX_ID | »

  Geographical area: ' | : PXX_LOCATION | »

  First name: ' | : PXX_LAST_NAME | »

  First name: ' | : PXX_FIRST_NAME;

  DBMS_LOB. () CONVERTTOBLOB

  v_blob,

  v_clob,

  amount,

  dest_offset,

  offset,

  blob_csid,

  lang_ctx,

  (caveat);

  V_LENGTH: = dbms_lob. GETLENGTH (v_blob);

  --

  -set up the HTTP header

  --

  owa_util.mime_header ("application/octet ', FALSE");

  -set the size so that the browser knows how to download

  HTP.p ("Content-length: ' |") v_length);

  -the name of the file will be used by the browser if users only one save as

  HTP.p ('Content-Disposition: attachment; filename = "download.txt" ');

  -close the headers

  owa_util.http_header_close;

  -Download the BLOB

  wpg_docload.download_file (v_blob);

  end;

  See you soon

  Carlos Pereira

• When you save the Photoshop elements 11 catalogue, which is saved exactly?

  When you save the catalog, which is saved exactly?

  Title of the message was edited by: Brett N

  Rolf - Jürgen wrote:

  When you save the catalog, which is saved exactly?

  Two things:

  -all your images

  -your catalog (the database and its associated files like caches)

  The catalog is physically located in its own folder; You can find its location in the menu help/information system.

• How to save the data of different rates in a single VI?

  Hello

  I tried to acquire 2-channel measurement of voltage at 10 kHz and analyze data, finally to save the data to both 1 kHz and 1 Hz. What I did is this loop of producer/consumer use to do the work of recording at different rates. I have queued all the data in the main loop, and then removed the data and write it to the file in other loops. I added "wait = 1 ms' a consumer loop for recording data at 1 kHz (loop of fast logging) and added" wait = 1000ms' in another loop to get the slow 1 Hz (logging loop) data record.

  My problem is that the data record works fine in the case of 1 Hz, but it does not work for the case of 1 kHz. Although the time-out period defined as 1ms, the interval between two samples in the loop of fast data recording is about 100ms.  Subsequently, 1ms, 10ms, 100ms, 150ms tried in this loop to see what intervals are in these cases. I found that the intervals are same as assigned in the timeout greater than 100 ms, but if the time-out is set to 1ms or 10ms, the intervals are again around 100ms.

  My question is - why I can't reach data record 1 kHz using loop of consumers/producers, while the same way works for the case of 1 Hz?

  Thank you very much

  Hao

  You are sampling at 10 kHz and you want to back up your data "as if you sampled at 1 kHz and 1 Hz", if I understand correctly.  I also understand that you use the design of producer/consumer model to help with this (a good idea).

  I'm assuming that the producer 'product' a segment of data at a time, to say the value of a second of data or a 2 x 10000 I16 (assuming a 16-bit integer A/D) table you put into a queue and wait for the consumer.

  If you have data at 10 kHz, how do you get representations to 1 kHz or 1 Hz?  There are (at least) two possibilities - average data over the interval of proper time, or (re) sample data.  The good thing is that you can handle the situation 1 kHz and 1 Hz, essentially at the same time and in the same processing loop.  I'll discuss the case 1 kHz - with the assumptions I made, the case of 1 Hz becomes almost trivial.  I'll discuss treatment also just one channel, as it is similarly almost trivial to go from 1 to N-channel.

  If you have 1 second of data sampled at 10 kHz, and will "reduce" 1 second of data sampled at 1 kHz.  Note that you have 10 samples for each data point that you want in the end.  The "Averaging" method said "Replace all 10 points in the average of these 10 points", while "resampling" method said "replace 10 points with, say, the first point, ignoring the others.  An easy way to do this is to use the Reshape feature to transform an array of 10 x 1000 elements of your array of 10000 items 1-D 2D.  Now, you can use a loop FOR an average of 10 items or simply extract the first.  [This is where almost everyone, including me, a mistake - when you put a 10 x 1000 2D array in a loop, you get 10 iterations of 1000 items and we want 1000 iterations of 10 items.]  Oops, what to do?  [Simple - converts 2D array before sending in the loop FOR.]

  So when you have processed your 10,000 points and got both 1000 samples "1 kHz" and 1 "1 Hz" sample, you write each of them in their respective folder and wait for the next item in the queue of the consumer.  Consumer focus on the queue loop, it will automatically 'block', waiting for the producer of the 'feed' some data.  Note that the producer generates data once per second, producing 10000 points for the consumer in the process, but the time to deal with these points and perform the required disk i/o should take only a few milliseconds (certainly not more than 100, even if writing to a floppy!), so you don't have much time to do other interesting things (such as display data).

  Bob Schor

• Save the selected value from the ListBox with its respective values control tab dropdown selected in another list box

  Hi all

  I'm doing a vi where I save the selected value from the ListBox with values respective tab control dropdown selected in another list box. Whenever I select Item1 can change of course and the respective tab will be open for this element. But now I want to just save the selection and put it into another ListBox.SO I can't renmove or add my wishes. Please help me.

  It will work.

  Probably not the greatest solution well.

• Error message: to restore enough memory for programs running, save the file and then close or restart all programs

  It said "restore enough memory for programs to operate correctly, save the file and then close or restart all open programs".

  I changed the size of paging and says always the same, I have 1.5 GB free RAM, but don't know how to find or what to do 'virtual memory '.  Have windows 7.

  I started the safemode and run also memory dignostics and nothing found, please help, cannot afford to take a shop or get a new computer, I'm using another pc.

  I was recommended to download and. Run 'hitmanpro3'... but if anyone has had this problem and solved it or know how, please help!

  Thank you

  Hello

  Please contact Microsoft Community.

  I understand that you receive an error related to the lack of virtual memory. This error message appears when running any program that requires more memory your computer has, or running in the background, Windows manages the system memory by saving the data between physical memory and virtual memory. In order to help you better, please provide us with the following information:

  What is the brand and model of your computer?

  I suggest you follow the methods and check them off below if this solves the problem.

  Method 1: Clean boot

  A clean boot is a troubleshooting technique that allows you to get the computer facing up and running so that you can determine what elements of the normal starting procedure problems.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: Once you are done with the clean boot, follow the section How do I reset the computer to start as usual after a clean boot troubleshooting under more information in the article to put your computer to normal startup.

  Method 2: Prevention of insufficient memory problems

  Follow the steps mentioned in the link and the check, it solves the problem. Follow the evolution of the size of the virtual memory section

  http://Windows.Microsoft.com/en-us/Windows/preventing-low-memory-problems#1TC=Windows-7

  Method 3: Virus Scan

  Microsoft Safety Scanner is a free burner that can be used to analyze a system for computer viruses and other forms of malware.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Additional information: Windows optimize for better performance

  Hope this information helps. Response with status so that we can help you.

• Unable to save the schema

  Hello...

  I am trying to record a schema called rim.xsd,

  I did the following steps:

  (1) create or replace directory rim_xml_dir as 'C:\Users\administrator\dbms_book\schemas';

  (2) copied the file rim.xsd "' C:\Users\administrator\dbms_book\schemas

  (3) download rim.xsd using the following code:

  declare

  v_result boolean;

  v_schema xmltype: = xmltype (bfilename ('RIM_XML_DIR', 'rim.xsd'), nls_charset_id ('AR8MSWIN1256'));

  Start

  v_result: = dbms_xdb. CreateResource ('/ dbms_book/schemas/rim.xsd ', v_schema);

  IF v_result then

  dbms_output.put_line ('Resource created...');

  COMMIT;

  on the other

  dbms_output.put_line ('create resources failed...');

  end if;

  end;

  /

  (4) However when you try to save the scheme to help:

  Start

  DBMS_XMLSCHEMA. REGISTERSCHEMA)

  schemaurl = > ' http://localhost:8080/dbms_book/schemas/rim.xsd ',

  schemadoc = > sys. UriFactory.getUri('/dbms_book/schemas/rim.xsd')

  );

  COMMIT;

  end;

  I receive errors:

  ORA-31154: invalid XML document

  ORA-19202: an error has occurred in the processing of XML

  LSX-00020: unknown type 'LongName '.

  ORA-06512: at "XDB". DBMS_XMLSCHEMA_INT', line 20

  ORA-06512: at "XDB". DBMS_XMLSCHEMA", line 177

  ORA-06512: at line 2

  After a copy of the rim: xsd:

  <? XML version = "1.0" encoding = "UTF - 8"? >

  <!-generated XML authority. In line with the w3c http://www.w3.org/2001/XMLSchema-->

  < scheme xmlns = " " http://www.w3.org/2001/XMLSchema "

  targetNamespace = "urn: oasis: names: tc: ebxml - regrep:rim:xsd:2.0.

  xmlns:TNS = "urn: oasis: names: tc: ebxml - regrep:rim:xsd:2.0.

  >

  < annotation >

  < documentation XML: lang = "fr" > diagram for OASIS ebXML Registry Information Model < / documentation >

  < / annotation >

  <!-$Header: /cvsroot/ebxmlrr/ebxmlrr-spec/misc/schema/rim.xsd,v 1.31 2001/12/01 14:45:46 - > farrukh_najmi Exp $

  <!-Begin mapping the model information from ebRIM.-->

  <! - define data Types - >

  < simpleType name = "String4" >

  < restriction base = "string" >

  < value maxLength = "4" / >

  < / restriction >

  < / simpleType >

  < simpleType name = "String8" >

  < restriction base = "string" >

  < value maxLength = "8" / >

  < / restriction >

  < / simpleType >

  < simpleType name = "String16" >

  < restriction base = "string" >

  < value maxLength = "16" / >

  < / restriction >

  < / simpleType >

  < simpleType name = "String32" >

  < restriction base = "string" >

  < value maxLength = "32" / >

  < / restriction >

  < / simpleType >

  < simpleType name = "Short name" >

  < restriction base = "string" >

  < value maxLength = "64" / >

  < / restriction >

  < / simpleType >

  < simpleType name = "LongName" >

  < restriction base = "string" >

  < value maxLength = "128" / >

  < / restriction >

  < / simpleType >

  < simpleType name = "FreeFormText" >

  < restriction base = "string" >

  < value maxLength = "256" / >

  < / restriction >

  < / simpleType >

  < complexType name = "AssociationType1" >

  < annotation >

  < documentation XML: lang = "fr" >

  The Association is the mapping of the same interface in ebRIM.

  It extends object.

  An Association Specifies references to two submitted previously

  registry entries.

  The sourceObject is the source in connection id

  The targetObject is the targetObject in connection id

  < / documentation >

  < / annotation >

  < complexContent >

  < extension base = "tns:RegistryObjectType" >

  < attribute name = use "associationType" = "required" type = "tns:LongName" / >

  < attribute name = use "source" = "required" type = "IDREF" / >

  < attribute name = use 'targetObject' = "required" type = "IDREF" / >

  < / extension >

  < / complexContent >

  < / complexType >

  < element name = "Association" type = "tns:AssociationType1" / >

  < complexType name = "AuditableEventType" >

  < annotation >

  < documentation XML: lang = "fr" >

  Mapping of the same interface in ebRIM.

  < / documentation >

  < / annotation >

  < complexContent >

  < extension base = "tns:RegistryObjectType" >

  < name of attribute = "eventType" use = "required" >

  < simpleType >

  < restriction base = "NMTOKEN" >

  < enumeration value = "Created" / >

  < enumeration value = "Deleted" / >

  < enumeration value = "Deprecated" / >

  < enumeration value = "Update" / >

  < enumeration value = "Versioned" / >

  < / restriction >

  < / simpleType >

  < / attribute >

  < attribute name = use of the 'object' = "required" type = "IDREF" / >

  < attribute name = "timestamp" use = "required" type = "dateTime" / >

  < attribute name = "user" use = "required" type = "IDREF" / >

  < / extension >

  < / complexContent >

  < / complexType >

  < element name = "AuditableEvent" type = "tns:AuditableEventType" / >

  < complexType name = "ClassificationType" >

  < annotation >

  < documentation XML: lang = "fr" >

  The classification is the mapping of the same interface in ebRIM.

  It extends object.

  A collation specifies the references to the two registry entries.

  The classifiedObject is the id of the object being classified.

  The classificationNode is the id of the ClassificationNode object classying

  < / documentation >

  < / annotation >

  < complexContent >

  < extension base = "tns:RegistryObjectType" >

  < attribute name = use "classificationScheme" = "optional" type = "IDREF" / >

  < attribute name = use = "required" type "IDREF" = "classifiedObject" / >

  < attribute name = "classificationNode" use = "optional" type = "IDREF" / >

  < attribute name = use "optional' =" nodeRepresentation"type ="LongName"/ >

  < / extension >

  < / complexContent >

  < / complexType >

  < element name = "Ranking" type = "tns:ClassificationType" / >

  < complexType name = "ClassificationNodeType" >

  < annotation >

  < documentation XML: lang = "fr" >

  ClassificationNode is the mapping of the same interface in ebRIM.

  It extends object.

  ClassificationNode is used to send a Classification tree in the registry.

  The parent attribute is the id of the parent node. the code is a voluntary code for a ClassificationNode value

  often defined by an external taxonomy (e.g. NAICS)

  < / documentation >

  < / annotation >

  < complexContent >

  < extension base = "tns:RegistryObjectType" >

  <>sequence

  < Ref element = "tns:ClassificationNode" minOccurs = "0" maxOccurs = "unbounded" / >

  < / sequence >

  < attribute name = "parent" use = "optional" type = "IDREF" / >

  < attribute name = "code" use = "optional" type = "short name" / >

  < / extension >

  < / complexContent >

  < / complexType >

  < element name = "ClassificationNode" type = "tns:ClassificationNodeType" / >

  < complexType name = "ClassificationSchemeType" >

  < annotation >

  < documentation XML: lang = "fr" >

  ClassificationScheme is the mapping of the same interface in ebRIM.

  It stretches from RegistryEntry.

  < / documentation >

  < / annotation >

  < complexContent >

  < extension base = "tns:RegistryEntryType" >

  <>sequence

  < Ref element = "tns:ClassificationNode" minOccurs = "0" maxOccurs = "unbounded" / >

  < / sequence >

  < attribute name = use "isInternal" = "required" type = "boolean" / >

  < name of attribute = "nodeType" use = "required" >

  < simpleType >

  < restriction base = "NMTOKEN" >

  < enumeration value = "UniqueCode" / >

  < enumeration value = "EmbeddedPath" / >

  < enumeration value = "NonUniqueCode" / >

  < / restriction >

  < / simpleType >

  < / attribute >

  < / extension >

  < / complexContent >

  < / complexType >

  < element name = "ClassificationScheme" type = "tns:ClassificationSchemeType" / >

  < complexType name = "ExternalIdentifierType" >

  < annotation >

  < documentation XML: lang = "fr" >

  ExternalIdentifier is the mapping of the same interface in ebRIM.

  It extends object.

  < / documentation >

  < / annotation >

  < complexContent >

  < extension base = "tns:RegistryObjectType" >

  < attribute name = use = "required" type "IDREF" = "identificationScheme" / >

  < attribute name = "value" use = "required" type = "Short name" / >

  < / extension >

  < / complexContent >

  < / complexType >

  < element name = "ExternalIdentifier" type = "tns:ExternalIdentifierType" / >

  < complexType name = "ExternalLinkType" >

  < annotation >

  < documentation XML: lang = "fr" >

  ExternalLink is the mapping of the same interface in ebRIM.

  It extends object.

  < / documentation >

  < / annotation >

  < complexContent >

  < extension base = "tns:RegistryObjectType" >

  < attribute name = use = "required" type "anyURI" = "externalURI" / >

  < / extension >

  < / complexContent >

  < / complexType >

  < element name = "ExternalLink" type = "tns:ExternalLinkType" / >

  < complexType name = "ExtrinsicObjectType" >

  < annotation >

  < documentation XML: lang = "fr" >

  ExtrinsicObject are attributes of the ExtrinsicObject interface in ebRIM.

  Inherit RegistryEntryAttributes

  < / documentation >

  < / annotation >

  < complexContent >

  < extension base = "tns:RegistryEntryType" >

  < attribute name = "MIME type" type = "LongName" / >

  < attribute name = "isOpaque" use = "optional" type = "boolean" / >

  < / extension >

  < / complexContent >

  < / complexType >

  <!-suite element VAT statement nneds to be lowercase but using mixed upper-case for backward compatibility-->

  < element name = "ExtrinsicObject" type = "tns:ExtrinsicObjectType" / >

  < element name = "Address" type = "tns:PostalAddressType" / >

  < complexType name = "OrganizationType" >

  < annotation >

  < documentation XML: lang = "fr" >

  Mapping of the same interface in ebRIM.

  < / documentation >

  < / annotation >

  < complexContent >

  < extension base = "tns:RegistryObjectType" >

  < sequence minOccurs = "1" maxOccurs = "1" >

  < Ref element = "tns:Address" minOccurs = "1" maxOccurs = "1" / >

  < Ref element = "tns:TelephoneNumber" minOccurs = "1" maxOccurs = "unbounded" / >

  < / sequence >

  < attribute name = "parent" type = "IDREF" / >

  < attribute name = use = "required" type "IDREF" = "primaryContact" / >

  < / extension >

  < / complexContent >

  < / complexType >

  < element name = "Company" type = "tns:OrganizationType" / >

  < complexType name = "SlotType1" >

  <>sequence

  < Ref element = "tns:ValueList" minOccurs = "1" maxOccurs = "1" / >

  < / sequence >

  < attribute name = "name" = "required" type = "LongName" / >

  < attribute name = use "slotType" = "optional" type = "LongName" / >

  < / complexType >

  < element name = "Slot" type = "tns:SlotType1" / >

  < complexType name = "ValueListType" >

  < sequence minOccurs = "0" maxOccurs = "unbounded" >

  < Ref element = "tns: Value" / >

  < / sequence >

  < / complexType >

  < element name = "ValueList" type = "tns:ValueListType" / >

  < element name = "Value" type = "Short name" / >

  < complexType name = "PersonNameType" >

  < annotation >

  < documentation XML: lang = "fr" >

  Mapping of the same interface in ebRIM.

  < / documentation >

  < / annotation >

  < sequence minOccurs = "0" maxOccurs = "unbounded" >

  < Element Ref = "tns:Slot" / >

  < / sequence >

  < attribute name = "FirstName" use = "optional" type = "short name" / >

  < attribute name = "middleName" use = "optional" type = "short name" / >

  < attribute name = "lastName" use = "optional" type = "short name" / >

  < / complexType >

  < feature name = 'PersonName' type = "tns:PersonNameType" / >

  < complexType name = "EmailAddressType" >

  < annotation >

  < documentation XML: lang = "fr" >

  Mapping of the same interface in ebRIM.

  < / documentation >

  < / annotation >

  < sequence minOccurs = "0" maxOccurs = "unbounded" >

  < Element Ref = "tns:Slot" / >

  < / sequence >

  < attribute name = "address" use = "required" type = "Short name" / >

  < attribute name = use "enter" = "optional" type = "String32" / >

  < / complexType >

  < element name = "EmailAddress" type = "tns:EmailAddressType" / >

  < complexType name = "PostalAddressType" >

  < annotation >

  < documentation XML: lang = "fr" >

  Mapping of the same interface in ebRIM.

  < / documentation >

  < / annotation >

  < sequence minOccurs = "0" maxOccurs = "unbounded" >

  < Element Ref = "tns:Slot" / >

  < / sequence >

  < attribute name = "City" use = "optional" type = "short name" / >

  < attribute name = "country" use = "optional" type = "short name" / >

  < attribute name = "PostalCode" use = "optional" type = "short name" / >

  < attribute name = "stateOrProvince" use = "optional" type = "short name" / >

  < attribute name = use 'street' = 'optional' type = "short name" / >

  < attribute name = use "streetNumber" = "optional" type = "String32" / >

  < / complexType >

  < element name = "PostalAddress" type = "tns:PostalAddressType" / >

  < complexType name = "RegistryEntryType" >

  < complexContent >

  < extension base = "tns:RegistryObjectType" >

  < attribute name = "expiration" use = "optional" type = "dateTime" / >

  < attribute name = "majorVersion" default = "1" type = "integer" / >

  < attribute name = value by default "minorVersion" = "0" type = "integer" / >

  < attribute name = use of 'stability' 'optional' = >

  < simpleType >

  < restriction base = "NMTOKEN" >

  < enumeration value = "Dynamic" / >

  < enumeration value = "DynamicCompatible" / >

  < enumeration value = "Static" / >

  < / restriction >

  < / simpleType >

  < / attribute >

  < attribute name 'status' = >

  < simpleType >

  < restriction base = "NMTOKEN" >

  < enumeration value = "Subject" / >

  < enumeration value = "Approved" / >

  < enumeration value = "Deprecated" / >

  < enumeration value = "Off" / >

  < / restriction >

  < / simpleType >

  < / attribute >

  < attribute name = use "userVersion" = "optional" type = "short name" / >

  < / extension >

  < / complexContent >

  < / complexType >

  < element name = "RegistryEntry" type = "tns:RegistryEntryType" / >

  < complexType name = "InternationalStringType" >

  < sequence minOccurs = "0" maxOccurs = "unbounded" >

  < Element Ref = "tns:LocalizedString" / >

  < / sequence >

  < / complexType >

  < element name = "InternationalString" type = "tns:InternationalStringType" / >

  < complexType name = "LocalizedStringType" >

  < attribute name = "lang" default = "en - us" form = "qualified" type = "language" / >

  < attribute name = "charset" default = "UTF - 8" / > ".

  < attribute name = "value" use = "required" type = "FreeFormText" / >

  < / complexType >

  < element name = "LocalizedString" type = "tns:LocalizedStringType" / >

  < complexType name = "RegistryObjectType" >

  < annotation >

  < documentation XML: lang = "fr" >

  ID may be empty. If specified, it may be in the form urn: uuid or have some

  arbitrary format. If id is empty registry must generate globally unique id.

  If id is provided and appropriate syntax UUID (starts with urn: uuid :))

  Registry will pay tribute to her.

  If id is provided and is not in the appropriate UUID syntax, then it is used for

  link to the document and is ignored by the registry. In this case the

  Registry generates a UUID for the attribute ID.

  ID must not be null when the object is retrieved in the registry.

  < / documentation >

  < / annotation >

  < sequence minOccurs = "0" maxOccurs = "1" >

  < Ref element = "tns:Name" minOccurs = "0" maxOccurs = "1" / >

  < Ref element = "tns:Description" minOccurs = "0" maxOccurs = "1" / >

  < Ref element = "tns:Slot" minOccurs = "0" maxOccurs = "unbounded" / >

  < Ref element = "tns:Classification" minOccurs = "0" maxOccurs = "unbounded" / >

  < Ref element = "tns:ExternalIdentifier" minOccurs = "0" maxOccurs = "unbounded" / >

  < / sequence >

  < attribute name = use "accessControlPolicy" = "optional" type = "IDREF" / >

  < attribute name = "id" type = "ID" / >

  < attribute name = "objectType" use = "optional" type = "LongName" / >

  < / complexType >

  < element name = "Object" type = "tns:RegistryObjectType" / >

  < element name = "Name" type = "tns:InternationalStringType" / >

  < element name = "Description" type = "tns:InternationalStringType" / >

  < complexType name = "RegistryPackageType" >

  < annotation >

  < documentation XML: lang = "fr" >

  RegistryPackage is the mapping of the same interface in ebRIM.

  It stretches from RegistryEntry.

  A RegistryPackage is a collection named objects.

  < / documentation >

  < / annotation >

  < complexContent >

  < extension base = "tns:RegistryEntryType" >

  <>sequence

  < Ref element = "tns:RegistryObjectList" minOccurs = "0" maxOccurs = "1" / >

  < / sequence >

  < / extension >

  < / complexContent >

  < / complexType >

  < element name = "RegistryPackage" type = "tns:RegistryPackageType" / >

  < complexType name = "ServiceType" >

  < complexContent >

  < extension base = "tns:RegistryEntryType" >

  <>sequence

  < Ref element = "tns:ServiceBinding" minOccurs = "0" maxOccurs = "unbounded" / >

  < / sequence >

  < / extension >

  < / complexContent >

  < / complexType >

  < element name = "Service" type = "tns:ServiceType" / >

  < complexType name = "ServiceBindingType" >

  < complexContent >

  < extension base = "tns:RegistryObjectType" >

  <>sequence

  < Ref element = "tns:SpecificationLink" minOccurs = "0" maxOccurs = "unbounded" / >

  < / sequence >

  < attribute name = use "optional' =" accessURI"type ="anyURI"/ >

  < attribute name = use "optional' =" targetBinding"type ="IDREF"/ >

  < / extension >

  < / complexContent >

  < / complexType >

  < element name = "ServiceBinding" type = "tns:ServiceBindingType" / >

  < complexType name = "SpecificationLinkType" >

  < complexContent >

  < extension base = "tns:RegistryObjectType" >

  < sequence minOccurs = "0" maxOccurs = "1" >

  < Ref element = "tns:UsageDescription" minOccurs = "0" maxOccurs = "1" / >

  < Ref element = "tns:UsageParameter" minOccurs = "0" maxOccurs = "unbounded" / >

  < / sequence >

  < attribute name = use = "required" type "IDREF" = "specificationObject" / >

  < / extension >

  < / complexContent >

  < / complexType >

  < element name = "SpecificationLink" type = "tns:SpecificationLinkType" / >

  < element name = "UsageDescription" type = "tns:InternationalStringType" / >

  < element name = "UsageParameter" type = "FreeFormText" / >

  < complexType name = "TelephoneNumberType" >

  < annotation >

  < documentation XML: lang = "fr" >

  Phone number is the mapping of the same interface in ebRIM.

  < / documentation >

  < / annotation >

  < attribute name = "PostalCode" use = "optional" type = "String4" / >

  < attribute name = "PostalCode" use = "optional" type = "String4" / >

  < attribute name = "extension" use = "optional" type = "String8" / >

  < attribute name = "number" use = "optional" type = "String16" / >

  < attribute name = "phoneType" use = "optional" type = "String32" / >

  < attribute name = use "URL" = "optional" type = "anyURI" / >

  < / complexType >

  < element name = "TelephoneNumber" type = "tns:TelephoneNumberType" / >

  < element name = "Number of Fax" type = "tns:TelephoneNumberType" / >

  < element name = "MobileTelephoneNumber" type = "tns:TelephoneNumberType" / >

  < element name = "PagerNumber" type = "tns:TelephoneNumberType" / >

  < complexType name = "TelephoneNumberListType" >

  <>sequence

  < Ref element = "tns:TelephoneNumber" minOccurs = "0" maxOccurs = "unbounded" / >

  < / sequence >

  < / complexType >

  < complexType name = "UserType" >

  < annotation >

  < documentation XML: lang = "fr" >

  Mapping of the same interface in ebRIM.

  < / documentation >

  < / annotation >

  < complexContent >

  < extension base = "tns:RegistryObjectType" >

  < sequence minOccurs = "0" maxOccurs = "1" >

  < Ref element = "tns:Address" minOccurs = "1" maxOccurs = "1" / >

  < Ref element = "tns:PersonName" minOccurs = "1" maxOccurs = "1" / >

  < Ref element = "tns:TelephoneNumber" minOccurs = "1" maxOccurs = "unbounded" / >

  < Ref element = "tns:EmailAddress" minOccurs = "1" maxOccurs = "unbounded" / >

  < / sequence >

  < attribute name = "company" type = "IDREF" / >

  < attribute name = use "URL" = "optional" type = "anyURI" / >

  < / extension >

  < / complexContent >

  < / complexType >

  < element name = "User" type = "tns:UserType" / >

  < complexType name = "ObjectRefType" >

  < annotation >

  < documentation XML: lang = "fr" >

  Use to reference an object by its ID.

  Specifies the id attribute of the object as its attribute id.

  attribute ID in ObjectAttributes is exactly the same syntax and semantics as

  ID attribute of the object.

  < / documentation >

  < / annotation >

  < attribute name = "id" type = "ID" / >

  < / complexType >

  < element name = "ObjectRef" type = "tns:ObjectRefType" / >

  < element name = "ObjectRefList" >

  < annotation >

  < documentation XML: lang = "fr" > list of the ObjectRefs < / documentation >

  < / annotation >

  < complexType >

  < sequence minOccurs = "0" maxOccurs = "unbounded" >

  < Element Ref = "tns:ObjectRef" / >

  < / sequence >

  < / complexType >

  < / item >

  < complexType name = "LeafRegistryObjectListType" >

  < choice minOccurs = "0" maxOccurs = "unbounded" >

  < Element Ref = "tns:ObjectRef" / >

  < Element Ref = "tns:Association" / >

  < Element Ref = "tns:AuditableEvent" / >

  < Element Ref = "tns:Classification" / >

  < Element Ref = "tns:ClassificationNode" / >

  < Element Ref = "tns:ClassificationScheme" / >

  < Element Ref = "tns:ExternalIdentifier" / >

  < Element Ref = "tns:ExternalLink" / >

  < Element Ref = "tns:ExtrinsicObject" / >

  < Element Ref = "tns:Organization" / >

  < Element Ref = "tns:RegistryPackage" / >

  < Element Ref = "tns:Service" / >

  < Element Ref = "tns:ServiceBinding" / >

  < Element Ref = "tns:SpecificationLink" / >

  < Ref element = "tns: User" / >

  < / choice >

  < / complexType >

  < element name = "LeafRegistryObjectList" type = "tns:LeafRegistryObjectListType" / >

  < complexType name = "RegistryObjectListType" >

  < complexContent >

  < extension base = "tns:LeafRegistryObjectListType" >

  <>sequence

  < choice minOccurs = "0" maxOccurs = "unbounded" >

  < Element Ref = "tns:RegistryEntry" / >

  < Element Ref = "tns:RegistryObject" / >

  < / choice >

  < / sequence >

  < / extension >

  < / complexContent >

  < / complexType >

  < element name = "RegistryObjectList" type = "tns:RegistryObjectListType" / >

  < / schema >

  Are you sure that you have made the corrections on the right?

  Looks like you have changed the name of the attribute instead of the type reference...

  Anyway, I do not know whence this schema file, but it's certainly invalid.

  Most attribute definitions lack the good "tns: ' prefix when they are based on a locally declared type:

  String4, String8, String16, String32, ShortName, LongName, and FreeFormText

  When an attribute (or element) is based on one of these types, the type must be qualified with the target namespace.

  I'll give the same example again:

  I'll post changed and now correct schema in a separate after this section.

  Then, you can do this without error:

  Start

  () dbms_xmlschema.registerschema

  schemaurl-online "rim.xsd."

  schemadoc-online xmltype (bfilename('TEST_DIR','rim.xsd'), nls_charset_id ('AL32UTF8'))

  genTypes-online fake

  genTables-online fake

  enableHierarchy-online dbms_xmlschema. ENABLE_HIERARCHY_NONE

  );

  end;

  /

  Please pay attention to the options I used:

  -genTypes and genTables = false, if you do not use the storage of GOLD (you has not answered this part)

  -enableHierarchy = none, if you do not intend to use the repository XDB (induced by the above option)

• Do you want to save the changes

  Hi all

  6i dev,

  I always get him 'do you want to save the changes you have done"message when I open my form and try to run the query.

  without to make anychanges.

  ??

  Thank you

  I found it, I'm assigning a value to an element in a trigger a time new form instance

  Thank you

• Is there a way to color the correct main items that allows me to export/save the results as a mp4?

  Is there a way to color the correct main items that allows me to export/save the results as a mp4?  I shot images that I need to spend on another editor for editing, but I want to fix the images colors before putting to sea.  I know you can color correct elements, but is it possible to export the clips to the original position of the source for mp4?  I tried to export a clip using H.264 corresponds to the source, but the result is a half the size of the original file. Your help is appreciated!

  You realize that what you do is a generational loss.  Compression of the images already well compressed!... as well as many other works that used saw the final cut.

  Increase the flow of your export to preserve quality as much as possible.

• PHP pages: output error check available and continues to save the page

  Hello

  I noticed that the error output check (green or red) in the Dreamweaver footer bar (on the left of "glimpses of the unit", "browser preview" and icons 'size of windows') is not available in the pages with the .php extension, .html to.

  In addition, Dreamweaver ask me to save the page whenever I change something.

  For example, if I use 'commands-> format source' in a .php page, Dremweaver ask me each time to save it to complete this command.

  Is this a normal behavior?

  I use the latest version, CC 2015 (7714 build), OS X Yosemite.

  Thank you

  Michele

  No, this isn't a bug, it's how DW. DW needs to have the file saved to be able to produce live view, and Yes, it sucks that the characteristics of the Live view mode are lost when in Design mode.

  Live view is still in its infancy since Adobe has begun to put the elements in Live view mode. If all goes well, they will see a way to overcome the ongoing pop-up from happening.

  Regarding the PHP support, this has always been a minimum feature. If you want a good PHP editor, then there are a lot of options such as

  IDE PHP that goes beyond the language: JetBrains PhpStorm

• Drag the Transition Fade question

  Hello

  I'm having a strange slide transition problem.

  Basically, I put slide 18 in my with a fade transition project.

  Slide 17-> Fade Transition-> Slide 18

  When I click on slide 17 and then select "Preview"--> "This Slide" it looks great. The transition between the 17 and 18 is perfect.

  However, when I select 'Preview'-> 'Project' and make the transition between slides 17/18, it shows a very strange fade. I suspended the fade and took a screenshot. See the image attached below.

  It almost seems as if he has stacked 3 arbitrary slides on top of the other (slides 5, 11 and 12) and shows them curiously in the transition. I tried to copy and paste the project into a new project. I tried to publish the project as a SWF file (to see if it publishes this way). I have tried to rearrange the position of the slide, save, then edit and save. Nothing works.

  Does anyone have ideas on this? Thank you!

  

  Okay, I think I found a solution.

  I tried to copy the slide 5, for example, pasted into another window of project and then delete the original slide in the initial project. Then I copied the slide I pasted into another window of project and pasted in the original project. It did not work.

  My original approach was to address the slides which seemed to 'stack' on the faded transition. But I am not trying to work with the slide itself, where the transition was actually applied. That's the key.

  I have reproduced the slide that contained the transition, hiding the original, and then when the realistic preview and published SWF file, the behavior of a normal transition faded returned.

  I hope this helps someone else who has run or will run into something similar!