Error on starting the PC

Similar Questions

• I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application.

  I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application" when I click ok it reboots. I can even recover the system, tried F8 startup, alt/F10, F2, launch repair system, Safe Mode and all the rest and still get the same error. System specs are Acer Aspire 5920, Intel T5450 processor, 2 GB ram, 160 GB of HDD, windows vista edition Home premium.  I am currently under the memory diagnostic tool windows, but it is said that the test results will be displayed again once you log in, but I can't log in to view them.  The test seems to be hanging around 21% so I don't know how well it will do

  Hi A1W1LL,

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure that may help you resolve the issue.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After reviewing the issue, put the computer into Normal mode.
  Uninstall or update the program that is causing the problem.

  If you are not able to boot to the desktop, you can try to restore your computer from WinRE.

  1. Insert the Windows Vista installation disc in the disc drive, and then start the computer.
  2. Press any key when the message "Press any key to boot from CD or DVD".
  3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
  4. click on repair your computer.
  5. in the System Recovery Options dialog box, select the drive of your Windows installation and click Next
  6. in the System Recovery Options dialog box, click System Restore.
  7. follow the instructions in the wizard to restore system as usual and choose the appropriate restore point.
  8. click Finish to restore the system.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• BTTray.exe, error to start the Application.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:BTTray.exe, error to start the Application.

  • Programs that you have problems with the Bluetooth does not work overwhelming
  • BTTray.exe, Application error messages start error.
  • Recent changes made to your computer: just updated to windows update
  • What have you tried to solve the problem, I tried to look at Windows Update and also send mail to Microsoft

  Read the following article to see if it helps to solve the problem: http://support.dell.com/support/topics/global.aspx/support/dsn/en/document?c=us&dl=false&l=en&s=gen&docid=6CF68D431EAAB41BE040AE0AB6E16686&doclang=en.

  Are you still using the BTTray?  If this isn't the case, we can solve the problem in a more easy way.

  Go tohttp://technet.microsoft.com/en-us/sysinternals/bb963902.aspx and run Autoruns and click all.  Search bttray.exe or mfc80.dll and when you find it uncheck the box to prevent it from start to start.  Check the entire list as there may be several entries.  When you're done, click OK and restart.   The message should be gone.

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error message "the computer restarted unexpectedly or encountered an unexpected error" after starting the system on Windows 7 Recovery.

  While trying to reinstall Windows 7 on my Dell Inspiron 1545 of the reinstall DVD after you have installed a hard drive again, I got this message: error message "the computer restarted unexpectedly or encountered an unexpected error" after starting the system on Windows 7 Recovery. Tried F10, SHIFT F10 and nothing happened. Then I tried a suggestion of virtual Agent to press F8 to get to advance Boot Options, but this option does not appear! Help!

  For Dell cptrs, you will need to press F12 to access the unique Boot Order Menu(= a temporary setting), little after the Dell logo appears on the desktop. U hv only 5 seconds to do, b4 the cptr will automatically initialize to top with the internal HARD disk.

  ....... F12 is usually used to start the cptr since the DVD player or a plugged in USB-flash drive with a Win 7 install or recovery media.

  To permanently change the boot order, you must similarly press F2 to access the full Boot configuration Menu. The default boot device is the internal HARD drive, but this can be changed to DVD player, USB, disk, network drive, etc. F2 is usually used to start the cptr of an external hard drive(= USB HDD) that contains a bootable Linux operating system.

• Error occurred starting the installation with the error code '132'

  Error occurred starting the installation with the error code '132'

  Hello

  We will be happy to help you, but before that we need additional information:

  Which Adobe product you are trying to install?

  What operating system you are using the version?

  Until then we can see the links below:

  Impossible to install the illustrator of the creative cloud

  132 CC Illustrator installation error

  All adobe products install correctly EXCEPT illustrator... "Error".

• Error when starting the weblogic Server

  Hi all
  
  I get the following error when starting the weblogic server (10.3.5.0). I couldn't access the EM.
  
  < 9 July 2012 19:00:23 IST > < error > < org.apache.beehive.netui.pageflow.internal.AdapterManager > < BEA-000000 > < ServletContainerAdapter manager not initialized successfully. >
  
  java.lang.NoClassDefFoundError: HTTPClient/ProtocolNotSuppException
  
  at oracle.sysman.eml.app.EMDClientInitializer.setHttpConnectionTimeout(EMDClientInitializer.java:97)
  
  at oracle.sysman.eml.app.EMDClientInitializer.init(EMDClientInitializer.java:85)
  
  at oracle.sysman.emSDK.svc.ServiceUtil.initService(ServiceUtil.java:94)
  
  at oracle.sysman.eml.app.ContextInitializer.contextInitialized(ContextInitializer.java:432)
  
  to weblogic.servlet.internal.EventsManager$ FireContextListenerAction.run (EventsManager.java:481)
  
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  
  at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
  
  at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
  
  at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
  
  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
  
  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
  
  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
  
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  
  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
  
  at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
  
  at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
  
  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
  
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  
  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
  
  at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
  
  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
  
  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
  
  at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
  
  at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
  
  to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)
  
  at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
  
  to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)
  
  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
  
  at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
  
  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
  
  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
  
  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
  
  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
  
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
  
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
  
  Caused by: java.lang.ClassNotFoundException: HTTPClient.ProtocolNotSuppException
  
  at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
  
  at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
  
  at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
  
  at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
  
  at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
  
  at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:179)
  
  at weblogic.utils.classloaders.ChangeAwareClassLoader.loadClass(ChangeAwareClassLoader.java:43)
  
  ... more than 40
  
  PostInstallConfigIntegration:oracle_ias_farm target auth check is performed.
  
  < 9 July 2012 19:00:49 IST > < WARNING > < HTTP > < BEA-101162 > < oracle.sysman.eml.app.ContextInitializer listener has not defined by user: java.lang.NoClassDefFoundError: HTTPClient/ProtocolNotSuppException.
  
  java.lang.NoClassDefFoundError: HTTPClient/ProtocolNotSuppException
  
  at oracle.sysman.eml.app.ContextInitializer.contextInitialized(ContextInitializer.java:1035)
  
  to weblogic.servlet.internal.EventsManager$ FireContextListenerAction.run (EventsManager.java:481)
  
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  
  at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
  
  Truncated. check the log file full stacktrace
  
  Caused by: java.lang.ClassNotFoundException: HTTPClient.ProtocolNotSuppException
  
  at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
  
  at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
  
  at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
  
  at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
  
  at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
  
  at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
  
  Truncated. check the log file full stacktrace
  
  >
  
  < 9 July 2012 19:00:49 IST > < WARNING > < HTTP > < BEA-101162 > < oracle.sysman.eml.app.ContextInitializer listener has not defined by user: java.lang.NoClassDefFoundError: HTTPClient/ProtocolNotSuppException.
  
  java.lang.NoClassDefFoundError: HTTPClient/ProtocolNotSuppException
  
  at oracle.sysman.eml.app.ContextInitializer.contextDestroyed(ContextInitializer.java:1242)
  
  to weblogic.servlet.internal.EventsManager$ FireContextListenerAction.run (EventsManager.java:482)
  
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  
  at weblogic.servlet.internal.EventsManager.notifyContextDestroyedEvent(EventsManager.java:200)
  
  Truncated. check the log file full stacktrace
  
  Caused by: java.lang.ClassNotFoundException: HTTPClient.ProtocolNotSuppException
  
  at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
  
  at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
  
  at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
  
  at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
  
  at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
  
  Truncated. check the log file full stacktrace
  
  >
  
  < 9 July 2012 19:00:49 IST > < error > < hats > < BEA-149231 > < cannot create the activation to true for the em application state '.
  
  weblogic.application.ModuleException:
  
  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1510)
  
  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
  
  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
  
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  
  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
  
  Truncated. check the log file full stacktrace
  
  Caused by: java.lang.ClassNotFoundException: HTTPClient.ProtocolNotSuppException
  
  at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
  
  at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
  
  at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
  
  
  
  
  
  
  How to solve this problem. Pls suggest me.
  
  
  Kind regards
  Deena.

  Copy the file http_client.jar in $ORACLE_HOME/Yes/jlib to $DOMAIN_HOME/lib. Also check if the classpath has been defined for this under $DOMAIN_HOME/bin/setDomainEnv.sh jar file

  https://forums.Oracle.com/forums/thread.jspa?MessageID=10200685

• Reviews for .dll file loading error when starting the laptop

  After removing an infection from malware Thinkpoint of my laptop and reconstituted at almost normal speed, a notice of a .dll file loading error appears while booting.  What are the options to eliminate that?

  This isn't a lot of information to go, but it's because forums MS Answers does not prompt for information, when a new question is asked.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Read this and see if it looks like your question and if it is not, let us know exactly what you see and we will always fix it:

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Error: Please start the previous version of windows then click on the DVD-ROM and click on setup.exe to install windows during the upgrade to Windows 7

  Original title: Windows problem of dimming.
  Problem: impossible to up grade windows vista to windows 7
  Error message (roughly): start the previous version of windows then click on the DVD-ROM and click on setup.exe to install windows.
  Description: actually I have windows 7 genuine DVD which can start the installer to start. but I can't find anyway to install windows 7. I tried what windows error msg says.
  Help.
                                        

  Hi laadpiyush,

  1. which version of Windows Vista is installed on the system?

  2. which edition of Windows 7 you are trying to upgrade?

  3 - is 32-bit or 64-bit?

  Step 1:

  You can first check the upgrade paths to perform an Update Installation of Windows 7.

  Links:

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  Step 2:

  Before upgrading to windows 7, you can try the following steps and start the upgrade installation.

  A. back up all important data on the system.

  Run the Upgrade Advisor

  See the link to download and run the Upgrade Advisor:

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  Software c. Security uninstall and reinstall after upgrade Installation.

  D. sign off all external devices connected (except keyboard and mouse) and start the installation.

  For more information on the Upgrade Installation, see the links:

  Installation and reinstallation of Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/6719ae72-7187-45CD-80f7-55e66f3ec686

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Java class not found error when start the Weblogic servers.

  Hello:

  I'm under Weblogic Server 10.3.6 on Linux 64-bit Machine for my forms and reports 11g.

  Today, I canceled a request I installed two days ago and then when I restart the server and try to start the Server Administration Weblogic, cluster_forms, cluster_reports.

  they are all running start.

  Name of server/subsystem	State	health	right
  AdminServer	RUNNING	Ok

  ? _nfpb = true & DispatcherPortletperspective = Setup-page & DispatcherPortlethandle=com.bea.console.handles.JMXHandle%2528%2522com.bea%253AName%253DWLS_FORMS%252CType%253DServer%2522%2529 & _pageLabel = DispatcherPage' rel = 'nofollow' > WLS_FORMSRUNNINGOkWLS_REPORTSRUNNINGOk

  But these business applications failed to start:

  The errors are:

  Start em: java.lang.ClassNotFoundException: org.apache.myfaces.trinidadinternal.taglib.UIXCollectionTag

  Start formsconfigmbeans: java.lang.NoClassDefFoundError: has not been initialized class oracle.forms.config.utils.FormsappConfigUtils

  Start formsapp java.lang.NoClassDefFoundError: has not been initialized class oracle.forms.config.utils.FormsappConfigUtils

  Anyone know why this is happening there?

  Track of the stack:

  # < 25 sep 2013 10:58:37 PM PDT > < error > < HTTP > < forms-reports > < AdminServer > < [pending] ExecuteThread: '7' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 6e32333635a10928:-70a358af:14158bbbc65: - 8000-0000000000000344 > < 1380175117550 > < BEA-101371 > < there was a failure during the processing of annotations for application/home/oracle/Oracle/Middleware/user_projects/domains/ClassicDomain/servers/AdminServer/tmp/_WL_user/em/hsz5x1 /. EM.war. Please make sure that annotations are valid. The error is >

  # < 25 sep 2013 10:58:37 PM PDT > < error > < hats > < forms-reports > < AdminServer > < [pending] ExecuteThread: '7' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 6e32333635a10928:-70a358af:14158bbbc65: - 8000-0000000000000344 > < 1380175117561 > < BEA-149265 > < error has occurred in the execution of the request of deployment with the ID ' 1380175115076 'for Task 4'. Error is: "weblogic.application.ModuleException: could not load the webapp: ' default" "

  weblogic.application.ModuleException: cannot load the webapp: ' / em'

  at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:395)

  at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)

  at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)

  to weblogic.application.internal.flow.DeploymentCallbackFlow$ 1.next(DeploymentCallbackFlow.java:517)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)

  at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:45)

  to weblogic.application.internal.BaseDeployment$ 1.next(BaseDeployment.java:648)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)

  at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)

  at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)

  at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)

  at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:208)

  at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:98)

  at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)

  at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747)

  at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)

  at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250)

  at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)

  at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)

  to weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$ 000 (DeploymentReceiverCallbackDeliverer.java:13)

  to weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$ 1.run(DeploymentReceiverCallbackDeliverer.java:46)

  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:545)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  Caused by: java.lang.ClassNotFoundException: org.apache.myfaces.trinidadinternal.taglib.UIXCollectionTag

  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:202)

  at java.security.AccessController.doPrivileged (Native Method)

  at java.net.URLClassLoader.findClass(URLClassLoader.java:190)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:306)

  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:301)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:247)

  at java.lang.ClassLoader.defineClass1 (Native Method)

  at java.lang.ClassLoader.defineClassCond(ClassLoader.java:631)

  at java.lang.ClassLoader.defineClass(ClassLoader.java:615)

  at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:141)

  Problem solved, I set several environment variables in the file .bash_profile, the CLASS_PATH crashing classpath of weblogic server during startup.

  Remove them and restart the server solved my problem.

  ORA-1033, ORA-00020: ERRORS WHEN STARTING THE DATABASE

  Hi... I am the server of Oracle 11 G (11.1.0.7.0) and here is the overview of the alert.log.
  
  It seems that 2-3 processes had problem while starting up... but later, they began... I checked in the alert file.
  
  ________________________________________________________________________________________
  ksuapc: ORA-1033 foreground process begins before PMON ksuapc: ORA-1033 foreground process begins before PMON ksuapc: ORA-1033 foreground process begins before PMON ksuapc: ORA-1033 foreground process begins before PMON
  ORA-00020: maximum number of errors ORA-20 process 0 overwhelmed will not be written in the journal of the alert to errors ORA-20.
  ORA-00444: background process 'CJQ0' failed during startup
  ORA-00020: maximum number of processes () exceeded
  ORA-00450: background process "CJQ0" is not started
  ORA-00444: background process 'CJQ0' failed during startup
  ORA-00020: maximum number of processes () exceeded
  ORA-00444: background process 'CJQ0' failed during startup
  ORA-00020: maximum number of processes () exceeded
  ORA-00444: background process 'CJQ0' failed during startup
  ORA-00020: maximum number of processes () exceeded
  ORA-00450: background process "CJQ0" is not started
  ORA-00444: background process 'CJQ0' failed during startup
  ORA-00020: maximum number of processes () exceeded
  ORA-00020: maximum number of errors ORA-20 process 0 overwhelmed will not be written in the journal of the alert to errors ORA-20.
  ORA-00020: maximum number of errors ORA-20 process 0 overwhelmed will not be written in the journal of the alert to errors ORA-20.
  ORA-00444: background process 'CJQ0' failed during startup
  ORA-00020: maximum number of processes () exceeded
  ORA-00020: maximum number of errors ORA-20 process 0 overwhelmed will not be written in the journal of the alert to errors ORA-20.
  ORA-00020: maximum number of errors ORA-20 process 0 overwhelmed will not be written in the journal of the alert to errors ORA-20.
  ORA-00444: background process 'OCMS' failed during startup
  ORA-00020: maximum number of processes () exceeded
  ORA-00444: background process 'OCMS' failed during startup
  ORA-00020: maximum number of processes () exceeded
  ORA-00020: maximum number of errors ORA-20 process 0 overwhelmed will not be written in the journal of the alert to errors ORA-20.
  ORA-00020: maximum number of errors ORA-20 process 0 overwhelmed will not be written in the journal of the alert to errors ORA-20.
  ORA-00444: background process 'OCMS' failed during startup
  ORA-00020: maximum number of processes () exceeded
  ORA-00444: background process 'CJQ0' failed during startup
  ORA-00020: maximum number of processes () exceeded
  ORA-00020: maximum number of errors ORA-20 process 0 overwhelmed will not be written in the journal of the alert to errors ORA-20.
  ORA-00020: maximum number of errors ORA-20 process 0 overwhelmed will not be written in the journal of the alert to errors ORA-20.
  ORA-00444: background process 'OCMS' failed during startup
  ORA-00020: maximum number of processes () exceeded
  ORA-00020: maximum number of errors ORA-20 process 0 overwhelmed will not be written in the journal of the alert to errors ORA-20.
  
  
  ________________________________________________________________________________________
  
  
  This doesn't come very often, but once in a blue moon... so is there a reason behind it? because it seems an error when starting only?

  ORA-00020: maximum number of processes (string) exceeded
  Cause: All process status objects are in use.
  Action: Increase the value of the initialization of the PROCESS parameter.

  http://download.Oracle.com/docs/CD/E11882_01/server.112/e17766/E0.htm#sthref23

  Re: Satellite L670 - error when starting the BIOS update

  Using the Toshiba Service Station, he warned me an update. The update is called "Satellite L670/L675, Satellite Pro L670, update BIOS Version 1.50". When I install the update, it gives me this error: "there was an error, please check below the elements.» More than 150 BIOS version. Battery capacity more than 10%. AC is attached.

  I tried the update when my battery was 100% and the captain was connected, and yet I still get the error.

  Can someone help me with this?

  Hello

  Firstly I have to say if you don t have any problems with your computer forget this update. BIOS update is required only if you really have problems, otherwise I don't such updated risky.

  Anyway, if you download the update of the BIOS, you will need to extract all files of archive zip first before start you. Also, make sure that you are logged on as administrator.

  Unknown BIOS 8302 error when starting the computer

  Original title: error code 8302

  Whenever I turn on my computer, I have to press F1. A screen pops up saying

  Check the NVRAM...

  Unknown BIOS error.

  Error code = 8302

  Press F1 to resume

  What it means and how to fix it? He used to start fine then all of a suuden one day he started this dong.

  Hello

  Have you tried to delete / reset the CMOS? This error starts occurring when the BIOS starts to lose its information, which can sometimes be resolved by updating / flashing BIOS as recommended above. If it does not, the Council will have to be replaced or repaired.

  Kind regards

  Patrick

  error when starting the system

  I'm running Windows XP Professional SP 3 and I get this error whenever I start my pc

  "Windows cannot find C:\Docume~1\Locals~1\Temp\577.exe. Make sure that the file exists on your computer or remove the reference to it in the registry.

  Things is I don't know what it means and how to fix and I don't have something before the error pops up.

  Something trying to run this program at startup.  It is not normal to launch programs out of the Temp directory.  It might be malware that has been partially deleted.  The easy way to get rid of this is to download the freeware "Autoruns", start it, click on the "Startup" tab and find an entry corresponding to the file you mention.  And then everything just to remove the check mark before and close.

  Autoruns: <> http://technet.microsoft.com/en-us/sysinternals/bb963902 >

  HTH,
  JW

  off frequency message error when start the computer in normal mode

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hey pamyres

  you say not what led to what happens

  You must give information here to get help

  try a restore of the system in safe mode before your problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Walter, the time zone traveller

  2 errors cannot start the file missing PSHED.dll and a blue screen error 0x0000C1F5

  Hello

  A few moments ago I had to do a restore of the system for some reason forgotten but restoring interrupted when the power off when I tried to restart it gave me a chioce of such boot options that start normally start SafeMode etc... but when I choose one of them it is said that the PSHED.dll file is missing or currput so I put in my drive repair/install and reboot, but after the white bar has loaded and the green bar loads, it gives me a blue screen error with the info tech being 0x0000C1F5 and the rest are zero

  I have a gateway with windows Home premium 32-bit model and more recent material I instaled a grapics card xfx 9800gt nvidia and a new mouse, any help would be appreciated thanks

  -Renton

  Hello

  This error is somehow a special case:

  Stop error message when you start a Windows Vista-based computer: "0x0000C1F5".
  http://support.Microsoft.com/kb/946084

  How to get around the Stop error 0x0000C1F5 on a Windows Vista-based computer
  http://support.Microsoft.com/kb/970101/en-us

  Stop error when you start a Windows Vista-based computer, even though hotfix 946084 is installed on
  computer: "0x0000C1F5".
  http://support.Microsoft.com/kb/958069/en-us

  Other methods:

  Workaround for STOP 0x0000C1F5 / 0xC1F5 / C1F5 / BSOD / CLFS. SYS / KB946084
  http://www.delmartian.com/nullpointers/workaround-for-stop-0x0000C1F5-0xC1F5-C1F5-BSOD-CLFS.sys-KB946084.html

  Easier to read same message
  http://BSODs.com/content/Windows-Vista-and-stop-0x0000C1F5-Linux-anyone

  SystemRescueCd
  http://SysRescCd.org/Main_Page

  Video fix
  http://www.YouTube.com/watch?v=Y_OjCkbZyTw

  Video Fix - Linux
  http://www.YouTube.com/watch?v=SwSvIhyZRVc

  ================================================

  For the most part, the BlueScreens (the above is a special case as noted)

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top 3 answers.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  Maybe you are looking for

  • Web pages won't load

    My web pages do not load in Firefox if I try my favorites, or by typing the web address.They load fine in Chrome or Explorer.Here's what happens: no matter how I choose to go to a web page (bookmark, type web address to search) I see the "connecting.

  • HP Pavilion DV6 laptop: I forgot the password of BIOS on HP Pavilion DV6 PC laptop

    Hello I need to activate the option of virtualization on my HP Pavilion DV6t laptop via the BIOS Setup. When I try to do the same thing it asked me to enter the BIOS password which I forgot unfortuantely. Please help me solve the same and I really ap

  • To replace the DVD drive with the second HARD disk on the pavilion DM4-2000

    Hello I would like to remove my laptop DVD drive and replace it with an SSD. It seems that the DVD player does not use the standard format of pins SATA for hard drives, rather than use a slightly smaller connection. Is it possible to connect a laptop

  • I cancel my Microsoft account first, cancel the Hotmail account?

    I want to cancel my account as soon as possible how can I do?

  • Error 80070020 and 80070490 Windows upgrade codes

    I tried to update windows and cannot install updates I got these error code 80070020 and 80070490 how can I fix this problem and get the updates to install? CATFISH

  Similar Questions

  • I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application.
  • BTTray.exe, error to start the Application.
  • Error message "the computer restarted unexpectedly or encountered an unexpected error" after starting the system on Windows 7 Recovery.
  • Error occurred starting the installation with the error code '132'
  • Error when starting the weblogic Server
  • Error on starting the PC
  • Reviews for .dll file loading error when starting the laptop
  • Error: Please start the previous version of windows then click on the DVD-ROM and click on setup.exe to install windows during the upgrade to Windows 7
  • Java class not found error when start the Weblogic servers.
  • ORA-1033, ORA-00020: ERRORS WHEN STARTING THE DATABASE
  • Re: Satellite L670 - error when starting the BIOS update
  • Unknown BIOS 8302 error when starting the computer
  • error when starting the system
  • off frequency message error when start the computer in normal mode
  • 2 errors cannot start the file missing PSHED.dll and a blue screen error 0x0000C1F5
  © 2024 eehelp.com. All Rights Reserved. 10 q. 0.016 s. Contact Us - Terms & Conditions - Privacy Policy

  EM	Prepared		Enterprise application	400
  	formsconfigmbeans		Enterprise application	100
  	formsapp (11.1.2)	Failed		Enterprise application	100