Scalling v3 - 372 screen Acer problem

Similar Questions

• s7 Acer problem

  Hello! I have an acer s7 391 and I have the following problem. When I enter the app menu, or when I try for example to attach a file to an e-mail in the mail application, the screen is gradually begin to look bad, the contrast and the colors change, and it's a little weird. When I swich to the beginning or to the desktop, the screen is trying to look good again, little by little. as in 5 to 10 seconds.

  The problem is that I noticed that this problem will NOT occur when the computer is in charge. What happenes only when it is on battery power. I already checked for the settings, there is no problem. plugged/unplugged settings are the same, but without effect.

  the service already changed my screen. the problem may be the motherboard or video card? or what it might be? has anyone noticed this problem with his laptop? Thank you!!

  As freeza indicated on your other post on this subject, please contact the service.

  We suggest to contact technical support in your region for further assistance in this matter.
  Acer Service & support

• Satellite C70 - A - 16 L - screen resolution problem

  Hello

  I recently had a screen resolution problem with my laptop (C70 - A - 16 L).
  The max screen resolution which is imparted to me is 1366 x 768, whereas before I think he used 1600 x 900.

  I tried the latest drivers, Bios, etc. and have also restored the operating system to a previous backup, as well as a new installation.
  I also tried to roll back to Windows 7 (with proper drivers). They all offer the same problem.

  This new maximum resolution display correctly - as if the LCD does not deal with the timings of 1366 x 768.
  I believe that the Panel is OK and the problem he reports the EDID information properly - to force windows to use the new resolution.

  Is there a download monitor.inf file that can be used to bypass the EDID reported by the Panel?

  Kind regards

  Antwist.

  If the right to display drver is usually installed everything should be OK.
  Have you installed Intel driver Toshiba download page 9.17.10.3062 version?

• Screen touch problems when you use the converter

  We just bought an Envy 27 tilt to our Caravan for all the good characteristics that HP has and TV

  Cause sometimes will want to run the HP converter 12v 400 watt true sine wave.

  We tried this to find a problem, the computer functioned well but the touchscreen ran a muck and did not work as usual.

  So after much googling and some reading I'd like here to answer fo HP.

  As I can't believe, I'd be the first to come on this problem and want to put it all in one in a motor home.

  What I read, it could be a matter of dirty power of the inveter, but we thought we have purchase the best brand true sine wave, we could leave our guys of battery here in Australia.

  Any advice would be received with gratitude.

  Thanks Lou, first of all for your time and on the other hand for your thoughts and advice.

  We have it finally working outside a performance of the inverter with number.

  But I have to say without any worthy of official telephone hotline support of HP.

  Lou, I'm working through several of your suggestions, pending the official response to my survey on what brand or type of UPS or UPS I should use with my desire to tilt.

  Well, it is very sad that a massive company like HP with what you would think would be a very large R & D service, cannot answer a simple question, like what type of UPS or UPS if they recommend to work with the touchscreen of the tilt.

  The poor people, I was talking to, had no idea what I was talking about, or what I was trying to do. How a computer call center peason knows not what a UPS, I can understand on an inverter, but the tech people, these are things really very similar in the different boxes.

  OK, if you have this problem with your inverter and touch screen, first of all not all inverters are equal even in the same brand that I discovered. I want to thank my provider inverter & battery for their time and for allowing me to put in place the HP Envy of tilt on the back of their store and try different UPSs, inverters and batteries.

  I'll talk about brands here, not rat on the brand, but as it may be useful to someone else in Australia in the future. It seems that my "Epower DCAC 400w 12v true sine inverter" wasn't at the height when it came to clean AC power required to operate the touch screen without problem.

  In the end, we tried a "Epower DCAC 1000w true Sine Wave 12v', really just to give it a go, thinking it would be a better to be the same brand as the unit of 400w, well it worked quite OK

  This unit of true sine wave Epower 12 v 1000w, fixed our problem with touchscreen and ran HP Envy tilt as if it is running on AC power.

  If anyone is interested for camper here, I found this configuration to draw between 4 and 5 amperes of batteries of 12v and about 41 Watts @ runing 240 volts a you tube clip.

  Well it is my experiences and the final result, I hope this helps someone else in the future, I'm sure that HP will not be able to.

  Thank you all.

• blue screen "possible problem with SPCMDCON. SYS

  all about office went< only="" program="" available="" and="" showing="" is="" mcafee=""> bed blue screen "possible problem with SPCMDCON. SYS '.  Hard drive reads accurately but very little available. Get pop up of the AV PROTECTION ONLINE DECLARING PAY 59.95 AND we will solve the problem. also the problem States is due KEYLOGGER ZEUS, please help

  Hello

  1. are you able to boot to the desktop?

  If you are able to boot to the desktop, run the antivirus scan and then run the System File Checker.

  Step 1: First we will analyze the system for infections using the Microsoft Security Scanner which can be downloaded from the link below:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Step 2: Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  (a) open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (b) type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If you are not able to boot to the desktop, please start the system in safe mode and follow the steps mentioned above.

• Screen resolution problem. Cannot set above 680 x 480.

  Screen resolution problem

  I have a dell latitude d630 2.5 GHz computer laptop under XP Professional 64-bit operating system.  The screen resolution will not be set above 680 x 480, and when I try to increase the computer stops with a black screen message that don't stay long enough onscreen to read.  Dell advised that they don't or support this machine with the XP operating system and that they have no drivers or other fixes for the problem.  I hope that you will be able to help and thank you.

  Hi dduck11,

  ·         What is the default screen of the laptop resolution?

  You need to update the graphics (video) drivers for the laptop. I see that there are Windows XP drivers available for the same thing. Download and install the updated drivers to see if it helps.

  Drivers & downloads for Latitude D630

• screen reader problems

  When you open the Yahoo home page, we get a distorted display. At the top it says problems screen reader, with line click on "disable auto updated pages" I click on it and most of the time that it takes me to a good Yahoo home page screen. Problem though is that I have to do it every time. I have lost the ability to get a good Yahoo homepage screen and forced to work to do every time I open Yahoo.

  I'm not sharing my information or be shared I know.

  How can I fix this please?

  Yahoo questions, ask Yahoo Tech Support.

  Here: http://help.yahoo.com/l/us/yahoo/search/

  http://en.Wikipedia.org/wiki/Screen_reader

  A simple search help and Support produced this one.

  Internet Explorer features, such as multimedia or page transitions, can cause screen readers to give confusing or incorrect information. Follow the steps below to disable the features that might interfere with screen readers.

  To make Internet Explorer work better with screen readers

  1. Click to open Internet Explorer.

  2. Click Tools and then click Internet Options.

  3. Click the Advanced tab.

  4. Make one or more of the following changes:

     • Place the cursor to follow the development of the screen

       If you want your screen reader or your magnifying glass to use the cursor (also referred to as theinsertion point or system caret) to determine whether to read or expand, follow these steps:

       Under accessibility, select move the slider system according to focus/selection box.

     • The text to display in place of the images

       Under accessibility, select him always expand Alt text for images of the box. UnderMultimedia, clear the show picture check box.

     • Stop page transitions causing erratic behavior in your player screen or voice recognition

       Under browsing, clear the Enable page transitions you use smooth scrolling check boxes.

       Under multimedia, clear the show picture and game animations in the checkboxes of the Web pages.

     • Help prevent the sounds of the Web page to interfere with your screen reader.

       Under multimedia, clear sounds in webpages box.

  5. Click OK.

  HTH

  If I brought you joy, vote! If I answered your question, click, propose as answer! > WT

• Screen resolution problems (Windows 10)

  I downloaded the latest trial 9 Captivate for Windows 10 and screen resolution problems. Basically, making the software unusable. A lot of screens and dialog boxes seems larger than the current window, they are in, making the right and downstairs parts invisible window (usually, this is where the 'OK' and 'Cancel' buttons for example).

  I'm Captivate on a laptop running 64-bit Windows 10 (Sony Vaio with an NVidia GT 640 M map graphic with the latest drivers)

  Does anyone know how to fix this? Here are some examples:

  

  

  

  No retina.

  What is the size of the police on? Win10, it is often larger than 100%, which is not really necessary for your resolution, but that's a retina display. I am using Captivate on Win10, but Surface Pro and laptop have a retina display.

• Screen of V3 - 772 g Acer problem

  Hello everyone, I encountered a strange problem with my Acer V3 - 772 g. It seems that the screen "flickers" with bars that cross the screen.

  While the majority of the time, it is not visible to the naked eye. In some situations, the problem can be quite apparent and strain in my eyes a little.

  Through the lens of a camera, it becomes completely visible, and comparison with photos and videos I've seen of him I can conclude that it is abnormal defintely.

  I have tried several attempts to solve this problem, as the installation of the latest drivers, the laptop restore factory setting and even the BIOS update. However, none of them seem to have an effect.

  I have, however, found that when the safe boot mode flickering does not occur.

  If anyone can give me any suggestions, I would be very grateful.

  Thank you.

  Hi p1f1313

  Then, it seems to be a bad connection from the motherboard to the screen. Acer support is world-wide, so care must always be able to help.

  Let us know how you go!

• Hi I have a mirror screen ACER Aspire R3 - 131T 11.6 2 in 1 sound on my TV problems

  Hi people

  I have problems with the sound when I use display showing the pic in my sony bravia tv via bluetooth is ok, but the sound is static type crackling noise cound would this little lappy is not up to the job its ok when I use the set method in Explorer, but I have no control over the size of the screen but works very well with the sound I use the sound control on the sound bar I up memory 8gig and the operating system is always on the 8.1 that I think w10 he would kill (unless you know different lol thank you for any input

  Hello

  have a 3050 so I surpose it's the problem

  If I use the game command it works fine but no control over the video or sound settings

  But if I try to use the mirror screen it crackles badly so I guess that I'm stuck to enter the folder and use the flat order no hard real ship so far unfortunately sony withdrew their software to use just for this hunted everywhere for her much luck so far

  Thanks for your help

• Acer Aspire switch 10 - stuck at splash screen (Acer logo)

  Hello. My Aspire Switch won't start. It always hangs at the initial home screen with the Acer logo and the circle of rotation. Circle continues to run forever (I have a switch to turn it off). It worked fine for about a month, but one day I had this problem. I tried to start it without dock and SD card, but it did not help. Does anyone know what I can try to do?

  My version is SW5-012-11 K 1 NT. L72ER.004 (64 GB, model FHD), bios 1.06.

  I just my Tablet repair service. They replaced the whole motherboard.

  The topic can be closed.

• Market problem laptop Acer problem

  Hi all

  I wonder if anyone has met, or heard of this problem.

  I have a laptop Acer Aspire 5745 w / 640GB HDD and 8 GB of memory running with Win 7 Home. I have about 3 years.

  A year or 2 there, he began to develop a market problem. I noticed that most of the cooler mornings (tendency to heat my house more than necessary). Sometimes, it makes the power of Win 7 on screen (Windows 7 and swirling colors, creating a window) and stop somewhere along the way. Other times it cannot even do it in front of the Acer splash screen. Sometimes it will go to full boot (Windows desktop) only to hang. I might have to restart the machine more than a few times to market. However, once I turned it completely, I can turn it off and restart without any problem.

  I reinstall the HARD drive and thought it helped, but only for a bit. The problem comes back. Battery seems to be in good shape.

  One thing I noticed this morning, is that if I unplug the PS, the computer started fine. I still need to do some additional tests to confirm or deny this... but it was a discovery of new and interesting.

  I read in some places that the PS/charger can be a source of such problems.

  Any idea or feedback is greatly appreciated.

  Thank you and see you soon...

  Hi stephr1

  Yes, it sounds as if the charger is at fault. If she starts & runs fine on battery - it's the only thing she could be!

  Buy a replacement charger - one who gives the same output/input as the existing one, then this should solve your problems!

• s7 Acer problems

  Hello. I recently bought an acer s7 - 391 and I encounter the following issues:

  1. I have changes in contrast when I slide hollow different applications. for example, when I open the music application, the background looks like it's moving, it wobbles, and the quality of the screen becomes very bad... However, colors appear very high. If I come back at the beginning, the quality begins to seem good again, in about ten seconds. What could be? I've updated the graphics card driver later. nothing.

  2. the trackpad is all bad. When I move the cursor on the diagonal, it is not moving directly, but looks like it's the theater of the waves, some forms of "s". ...

  3. the screen has gray spots in the lower corners. It also loses little light...

  4. my keyboard part 2 shots when I press some keys. I type too slowly and as carefully as I can, but it still doesn't work.

  I think I'll go into service with her. did anyone experienced the same problems that I did?

  Thank you!

  Keep sending/taking it repairs until you get all your problems solved.

• Ghost ghost, touches on the touch screen Acer FT200HQL

  Hello

  A few days ago, I just bought new Acer 19.5 ""FT200HQL bmjj" and after the first hour of use, he began to experience what can best be described as random" phantom/phantom"key." Touch screen registers the keys at random but while no. we're actually there touch. The only temporary solution I've found so far is to disconnect and reconnect power. But shortly after that the problem reappears.

  The computer is a standard desktop Lenovo running Windows 7 Ultimate 32 bit. All the drivers and OS updates are up-to-date. Acer monitor only for this model drivers are for Windows 8, virtue, it turns the files aren't even drivers but some ICC profile / so I count on those provided by Microsoft.

  What is a driver/software Microsoft or Acer hardware/firmware related problem? Any thoughts would be appreciated!

  Thank you in advance.

  I just want to highlight the issue that others have the same problems can strain on this thread.

  Repair service ran some diagnostics and decided that the monitor needs to be replaced, and now I'm waiting for the replacement. Will write more when I get my hands on the new. I hope that it will not encounter the same problem.

• PowerBook G4 aluminum screen rendering problems

  Hello. I use an old PowerBook G4 aluminum 15 " only for some older programs that I still have, the specs are 1.33 GHz, 1 GB DDR SDRAM, an A1095 model (I think). It is currently running OS 10.4.11 Tiger.

  I am having some problems with the rendering of images, windows and icons on the screen. Sometimes, say if there is a background image, there will be pixels of a pure purple and light green color and other parts of these colors in pants plates, which will fade in-and-out in intensity. There will be a purple halo around the icons on the desktop, windows will have their underlined by violet title bar and the window itself will be celebrating also in purple. When I move these icons and windows, the outline of color moves with him - even for images with these pants patches. If I try to take a screenshot, it looks like it has taken to this effect, but when the screen goes back to normal, the images do not show fading.

  There is also a kind of shear horizontal wind that comes and goes, like a Photoshop effect, which seems to affect the whole screen - but it was did not so lately, moreso just the pants colors. The effect of shear wind or rosacea are affected by the position of the screen.

  These are intermittent problems that come and go, sometimes they may not arrive for a few hours or a few days, and sometimes they keep coming back and to stay - they also vary in intensity, sometimes just annoying, other times made the screen so bad that I have to do a hard shutdown with the power button.

  I have connected this laptop to a LED TV (via a HDMI DVI cable) when I had these patches scrambled on the computer laptop screen - and the TV screen shows very well, without tasks.

  After asking some Apple technicians, they thought it could be anything from:

  -l' screen is gone - but why would move fading when I move the images/icons/windows?

  -a bad laptop screen cable

  -video card - but she restores the fine screen image when connected to a TV?

  -memory on the logic board

  -poorly seated RAM (which I've deleted and reinstalled several times with the same results)

  Or a combination of these. They say this isn't a problem with HD.

  I understand that it is an old computer and an old technology, but I would still go back to normal, as everything else works fine. I know a guy who can replace the screen and the cable, as it seems a little tricky for me to do would not touch the video card. I'm wary about this fact, because it may be other things that causes this problem.

  In addition, the graphics card is an ATI Mobility Radeon 9700, model: ATY, RV360M11 - if it helps.

  Any ideas - thanks. (Please keep it relatively simple, if possible)

  As the connected HDTV does not have this effect, the problem is likely related to the PowerBook's display hardware.  If the problem was related to the graphics card (and 'upstream' material) or due to a software problem, waiting for HDTV to show the same effect at a time when the PowerBook display is the effect.

  You can try to do a reset PMU (power management)

  Resetting PowerBook and iBook Power Management Unit (PMU) - Apple Support

  and that he may as well do a LANDAU ('NVRAM') reset too (although less likely to cause described problem)

  How to reset the NVRAM on your Mac - Apple Support