Scanjet G4010: Cannot install scanjet G4010 in Win 8.1 32bits

Similar Questions

• Cannot install flash player on win 10 ie or chrome

  Cannot install flash player on win 10 ie or chrome

  !

  Help

• Cannot install bios access from win 8

  HP Touchsmart tm2 laptop and although age has officially supported, was able to install Windows 8.0 but now cannot move to 8.1 Windows because I can't boot from the CD/DVD or USB flash drive.

  The store Windows says that my 8.0 cannot be updated to 8.1 via the shop, so I want to do a fressh 8.1 installation and have purchased the software and the key.  But I can't get the laptoip to boot on the USB CD/DVD or a USB flash drive (or even a floppy disk)

  Since the installation of 8.0, when the computer starts, a HP logo appears, but there is no option to enter the BIOS setup or to specify the boot sequence.   I have no reason to believe that I changed the boot sequence, so there should resemble any of these external devices first, but this is not (there's a brief access to the CD/DCD, but it goes to start with the hard drive).

  It seems that Win 8.0 installation has done something in the BIOS.  Have tired etc. ESC, F2, F10, Del, F6 during the boot process, even if the messages do not appear.   Maybe I could reflash the BIOS?  Or is it an executable I could run wtining Win 8.0 to access the BIOS, otherwise I'm stuck.

  Anyone with a similar problem/solution?

  Thank you

  Was able to get. Window very tight to get into the boot on this computer compared to other menu that I worked.  Configuration via USB seems continues normally.

  I already installed Win 8.1 on a HP TouchSmart300 desktop model and found that the microphone does not (confirmed elsewhere in this forum).  Using a wirelss headset Plantroincs has proved a good solution.  Anticipating I could met the same problem on the laptop.  Now soon.

  Thanks again.

• Satellite Pro 4200: cannot install graphics drivers correct Win ME

  Hello

  I have just reinstalled Windows ME on Satellite Pro 4200 machines, but I don't seem to be able to install the correct graphics/display drivers. Can anyone help

  Thank you
  Steve

  Post edited by: skc1959

  Hello

  What graphics card was installed in this oldie?

  I don t think that Toshiba provides Win ME drivers for this device, and so you should Google in the internet for the graphics driver.

  Good luck

• Cannot install window 10 for win 7 pc.

  I had downloaded 10 window, ON A PAGE it says 10 window is ready to be installed, then shows a restart by clicking on it restarts c p as usual, but not with 10 victory & clicking again to restart 3 times, always without change. I have a pc win 7, Internet Explorer 11. 1 month ago I installed

  victory. 10 at this time, I lost all the photos, videos & music files. then I went back to windows 7 now I had saved on an external hard drive.

  can someone tell me why I got that trouble this time

  Microsoft recently released updates for Windows 7 and Windows 8.1 improve the stability of the upgrade for Windows 10. Please ensure that you have the update to your respective version of Windows:

  KB3112343 for Windows 7 et KB3112336 for Windows 8.1

  then

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  then

  then

• Cannot install old software under Win 7

  I just bought a Win 7 laptop to remove or replace a desktop XP computer. Initially, it came with Win 7 Home Premium. I could not install an earlier version of the software Quickbook, who previously installed and running well under XP or Vista.  See in-store technicians; they all recommend the upgrade to Win 7 Professional so that it can run the program in XP mode. After this upgrade, I can not install the software.

  QuickBook Setup starts with run 'install' which is supposed to launch setup.exe. the latter is supposed to install Quickbook under Win 7 Professional.

  I appreciate any help from this forum! More recent Quickbook ranking would be simple, but for the fact that the data file is accessible from many other user/computer with earlier versions of Windows. Old QuickBook does not recognize the new Quickbook data format.

  Windows XP Mode is installed?

  Please note that Windows XP Mode is a separate instance of Windows to be installed first, and then you need to install the software inside Quickbooks, which will then run the application from Windows 7. The following article will show you how to set up Windows XP Mode and how to virtualize your application (ignore the part about setting up hard assisted virtualization)

  Mobile: http://www.notebooks.com/2009/11/23/using-windows-virtual-pc-with-windows-xp-mode/

  If you have not yet downloaded Windows XP Mode:

  Both Windows XP Mode and Windows Virtual PC can be downloaded from http://www.windows.com/business/downloads.
  For more information about system requirements, please visit http://www.microsoft.com/virtual-pc

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Cannot install SP2 because of Win update, error 8024402C

  Can someone please?

  Just a new player 160hard had put in my laptop Toshiba, place the recovery disc, all works well tried to connect to internet (wireless) would not work. We called AOL tells me that I need to get service pack 2.

  Tried to update windows telling me error 8024402 c. I know only a little about computers and any advice would be helpful and right AOL saying I need service pack 2. Wi - Fi was working fine before I put the new hard drive and recovery disk in.

  Thank you

  Hello

  You can download SP2 manually from the Microsoft Web page

  Choose the right (32-bit or 64-bit) SP2 to the system that you are using here.
  You can save this on USB and can install this memory USB flash on your computer.

• Cannot install Lightroom CC on win 10 32-bit. [was: creative cloud Adobe install old LR 5]

  Cloud of Adobe Creative install old LR 5 and not the most recent Lr CC (32-bit win10), please can someone help?

  You have a 32-bit computer.

  Lightroom CC only installs and runs on 64-bit computers.

  You will need a new computer 64-bit if you want to run Lightroom CC.

• Cannot install Lightroom 6 on Win 7 32 bit

  I bought lightroom 6 for a gift for Christmas, but when you try to install it, it say you need 64-bit and my window 7 is 32 bit I do

  You must upgrade to a 64-bit operating system. Otherwise, there is no way to use Lightroom 6

• Once again... Cannot install Flash Player on Win 7: 64-Bit

  Read the tutorial after tutorial. Can't seem to get this right. Downloaded... new flash player it downloads ok... but when it installs it stops and I said DO NOT HAVE PERMISSION and stops. I tried to delete the file SYS WINDOWS as mentioned (FLASH FILES) in windows32 and WOW... but it says I can't delete? I tried again and it says that it is used with another program. When I open the Task Manager, I can't find which program is using flash. I ran the uninstaller flash as mentioned on the site... and have the same problem. Was trying to clean install... no luck. I'm a bit slow on some computers, but you seem to be difficult to get this on my computer...

  Windows 7 Premium / 64 bit / IExpolorer.

  If you have an administrative account and applications that could keep Flash Player (Internet Explorer and service applications that could integrate an instance of Internet Explorer that uses the Flash), then you get the permission issues, because the registry entries or permissions of the file system is corrupted.

  I would like to start by confirming that the file system is in good condition and repair any problems:

  Check your hard drive to find errors in Windows 7

  Then I would try running it uninstaller, restart, and then running the installation program.

  You can also consider boot mode safe for this process to make sure that none of what now is Flash in use is to load at startup:

  Start your computer in safe mode - Windows help

• Cannot install java 6 on win 7 64 bit computer laptop: error 1723

  same deleted (uninstalld) old java and tried

  Here's what must tell Java Web site: http://www.java.com/en/download/help/error_1723.xml

• Cannot install verizon 4g on your desktop vista 32bits. I used verizon 3g with no problems.

  I bought a laptop running Windows 7 and it would not go the verizon 3g so I bought a 4G verizon.  He has worked with the laptop but when I went to install on my desktop running Vista 32-bit, I get the "Driver installation gailed: 1603."  I tried everything to solve.  I called Verison and they had me try a number of things, but nothing has worked.  I uninstalled the Pantech modem and software from Verizon.  Can anyone help.

  Hello

  (1) you are able to install other programs without any error message?

  I suggest you unregister and re - register the windows setup program and check if that helps you. To do this, please follow the steps below:

  Unregister and register the Windows Setup program again

  (a) click the Start Orb, in the search box of start, type MSIEXEC /Unregister. and then click OK.

  (b) click on Start Orb, in the search box to start, type MSIEXEC/REGSERVER, and then click OK. After you run this command, the operation is complete.

  (c) now try again to your installation.

  You can also download and install the latest version from the installer of windows from the link below:

  http://www.Microsoft.com/download/en/details.aspx?ID=8483

  Hope this information is useful.

• Satellite L300 PSLB0E - cannot install Vista and Win XP

  Hello

  I have a L300, model number PSLB0E sat. \
  It was originally loaded with vista home premium, but it starts now not at all.
  I made a disc of vista Home premium and the number to go with it, but it gets as far as "windows installation" but then it stops.

  I tried to new hard drive, same loading XP pro not working!
  I think it's Bios, but after the download from Toshiba on this PC and transfer it to a memory stick, my laptop can't see it?

  Please can someone point me in the right direction?

  A big thank you in advance Paul

  Hi mate

  Please check in the BIOS if the disc is visible.
  If so, then set compatible SATA to AHCI mode and then try to boot from the Vista or Win XP disc.

  But if the HARD drive is not visible in the BIOS then it would mean that the HARD drive is dead and so you cannot install the operating system.

  Check it!

• Cannot install all software: error: an application not valid win 32

  I can't install any software and so or troubleshoot using microsoft fixit tool as they don't install it, analyses using malwarebytes and nothing came, iam at wits end.tried to use scandisk and cannot open it because of win 32 error and run as admin does not work either.

  Original title: the user interface have a pad with windows home premiun thinj lenovo and when I try to click on an icon I have an application not valid win 32

  Hello

  This problem may be caused by one of the options below.

  1. the file is corrupt, missing, or bad.

  2 file is not designed for your version of Windows.

  3. the file is a virus, worm or other malicious program file.

  4. incompatibility of hardware.

  Step 1: Check if the problem continues in a new user account.

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Step 2: If the problem does not persist in a new user account, then refer to the following article to fix a corrupted user account.

  Difficulty of a corrupt user profile: http://windows.microsoft.com/en-US/windows-vista/fix-a-corrupted-user-profile

• Satellite Z930-14F - cannot install Win 8.1 SCCM 2012 R2 environment

  Hi all

  Series laptops Z Sattelite impossible to install OS (win 8.1) of our SCCM 2012 R2 environment.

  No installation or pxe boot interrupted error is shown.
  The environment is used in order to correctly install the operating system (win 8.1) on various other seller computers (dell) and the VMS (hyper-v and vmware).

  I tried boot UEFI and CMS options and tried to turn off the secure boot. Please advice.

  Also, I read on the 'package to install SCCM for Toshiba. This will help in my situation or it's just the driver for SCCM packages?

  Best regards, Evgeny.

  I assume you mean on this package from Toshiba:
  http://www.Toshiba.EU/services/on-demand/business-computing/sdp120gs-v/

  I put t have much experience using this drive package SCCM, but it is certainly compatible with professional Toshiba laptops. The Satellite / Portege Z930 belong to the range of the company, and I think that the package must be compatible.
  This package seems to be for all administrators that manage devices on the network of business with SCCM 2012 R2. Toshiba offers with the new SCCM Toshiba package a solution to integrate other laptop to an existing IT infrastructure quickly and smoothly and all the Driver from Toshiba and application packages and a demonstration task sequence are integrated.

  However, it seems that you could get more details about this package directly from Toshiba [email protected]

  By the way: The Win 8.1 installation requires the UEFI mode (in which case the UEFI BIOS is available). But the start of another external source requires the secure boot disabled option.
  Then maybe you should use the UEFI mode but must clear the safe boot option to boot from LAN.