Scope of the Globals file

Using file globals to pass data to another sequence, is it necessary that called sequence must be a sous-suite of the call sequence. In other words, if I call a sequence file that is not a subsequence in my call sequence called sequence will be able to access the globals file of the call sequence?

Hello

FileGlobals are in the scope of any order in the same file in sequence.

for example

Sequence A and B of the sequence contained in SequenceFile SF1, who has a FileGlobals FG will be increased to two sequences.

While

Sequence has contained in SequenceFile SF1 his ' FileGlobals will not be credited to the sequence B contained in SequenceFile SF2.

Hope this is clear

Tags: NI Software

Similar Questions

  • Amine bars missing on the global file

    I inherited a few screws in which scroll bars have been eliminated in a global file. You can do this by clicking on any overall. How to restore this option so that scroll bars are visible?

    Thank you

    -Ram.

    Once the two are off I don't think there's a way to be able to do it without having to do it programmatically. See here: How can I programmatically show or hide scrollbars on the front panel?

    The example given in this link does it only for the VI himself. If you want to do the operation on an another VI you must open a reference to VI/global. See attachment.

  • The Globals and Globals station brought in the sequential model of the file

    Hello

    I create sample files to illustrate the use of the station globals and globals using TestStand 4.2, model batch file.  I was assuming that station overall value would be persistent to the station and file global values are persisted to the file (as long as the file is not deleted, the value will remain).  But, after the executions of couple, I found that I'm wrong.

    He's looking to me that globals file, the value reset for each new execution.  I would like to ask if this is a correct behavior?  If it is correct, I can say that: because each run contains the new instance of the file, so at the beginning again, new copy of the globals file are created.  (I'm borrowing the idea of the model of batch execution logic, but for my example, I use only the sequential model).

    In addition to reading the other posts, for globals station, value is not persistent until a file Save command issued manually.  How to deliver this command?  And, is there a similar command for globals file?

    Thank you.

    Peggy

    Hello

    When teststand is closed the StationGlobals file is updated automatically, you don't have to do anything.

    For FileGlobals, there is a static version, that you create at the time of editing, and there is a version of the runtime. When you change the values during execution, these are not kept when execution is completed. So if you want to maintain values of execution you will also change the static values and also save the file in the sequence.

    There are examples in this forum to do just that.

    Hope this helps

    Concerning

    Ray Farmer

  • It is possible to switch between mode 'file separate globals' to 'share the same globals file mode' during the test run.

    Hi all

    It is possible to switch between mode 'file separate globals' to 'share the same globals file mode' during the test run.

    Or there is another option to use variables separated and shared at the same time for 2 parallel Sockets (ParallelModel.seq).

    Thank you

    Thank you

    I think it's useful!

  • all my components are grey in multisim11. Path to my configuration in the global preferences file is also grayed out, can not change the standard cfg

    all my components are grey in multisim11. Path to my configuration in the global preferences file is also grayed out, can not change the standard cfg

    Hi Escapermark,

    Take a look at these articles to the knowledge base, one should set the gray on the problem:

    http://digital.NI.com/public.nsf/allkb/609A763289E6E81D8625739F0052151F

    http://digital.NI.com/public.nsf/allkb/2719D00E36A4D53A8625721300685B3F

    http://digital.NI.com/public.nsf/allkb/B3D720348D55D0C5862575BA00560908?OpenDocument

  • Need a few more details on the Options field, scope of the attribute, 'Global' vs 'form' when defining tags

    OK, I admit I am confused... I solved my problem but I do not understand the solution.

    I have a form that has a header that is reported as"overflow" and NO overflow and the multiplier of overflow is set to 0.  The trigger is manual and use a search mask counter instance flag and 0.  The header is repeated at the top of each page, everything as I want it, but the header tags (IE POLITICAL. NUMBER) are printed on the first occurrence of the header section and the second and the following tags is white/not filled.

    If I change the section that is used for the header and define the scope of the POLICY. Tag NUMBER 'form', it works correctly and prints the value of POLICY. NUMBER on each occurrence of the header.  If I set the scope of the POLICY. Tag NUMBER on 'GLOBAL' of POLITICS. Tag NUMBER is entered on the first occurrence (page 1) and white on all events (page 2, 3...) It makes no sense for me?

    My POLICY. NUMBER tag on the section uses the XDB, multiplier of overflow rule is set to 0 and overflow is the default.

    Can someone explain to me how it works?  The impression that the GLOBAL setting should fill all occurrences of the tag POLICY. NUMBER of all forms together.  Would have been logical for me if I changed it the chapter to the FORM but not global to FORM.

    Thanks in advance for helping me understand how it works!

    Documentation... I'd be surprised if this is not documented somewhere. It is perhaps not as important as it should be. As a guess, I would first look at the description of the PaginateAndPropagate rule or any place that talks about the paging / batch (Gendata) execution of overflow. If it is not described as a note somewhere in the DMStudio of the field properties, then it is a logical place where is should be. The problem is that this behavior is different in the lots it is for data entry where the global spread is managed dynamically, so it is noteworthy.

  • Fatal error: invalid page found in the global storage file in the location for cube BSO

    Hi all

    Due to drive App out of space issue, one of my cube essbase BSO is corrupted and I'm trying to restore it from the backup.


    I deleted files .esm & .tct and all the other temporary files, .pag deleted and index files, .app and .db restored backup files, the cube is not starting and throwing the error below.

    Error: 1270005 error loading application 1054003: [Thu Jan 22 16:01:52 2015] Local/EPM_LGCY / / / 17120/Error (1270005)

    Fatal error: invalid page found in the global storage file in the location [0001.0001.00000002]

    I copied the support environment of backend application and tried to launch the cube but still the same error.

    I tried to delete the cube of EAS and still the same error. No doesn't work on this cube, and every time he throws the same error.

    Could someone please explain what the error "invalid page encountered in the global storage to the location file" means and how to fix this?

    Any information is greatly appreciated.

    Thanks in advance

    Srini

    Try the following support document - "Essbase 11.1.2.3.500 by that Block Storage Option (BSO) Application fails to start the errors related to a global Application of the Option (ASO) storage (Doc ID 1667664.1)"

    Essentially to delete the ASO app under the location of the hybrid - /user_projects//EssbaseServer/essbaseserver1/hybrid /.

    See you soon

    John

    http://John-Goodwin.blogspot.com/

  • Cf11 VFS error: The Global memory limit 1000 MB for virtual file system in memory exceeded.

    Greetings,

    I have a new standard CF11 installation on Windows 8 server x 64

    16 GB of ram

    Parameters to the JVM:

    -serveur - Xmn1024m-Xss1024k - XX : PermSize = 256 m - XX : MaxPermSize = 2048 m - XX : + UseParallelGC - Xbatch-Dcoldfusion.home={application.home}-Duser.language=en-Dcoldfusion.rootDir={application.home}-Dcoldfusion.libPath={application.home}/lib-Dorg.apache.coyote.USE_CUSTOM_STATUS_MSG_IN_HEADER=true-Dcoldfusion.jsafe.defaultalgo=FIPS186Random

    Min heap: 2048 mb, Max 6144 mb

    Parameters of VFS:

    VFS global memory limit: 1000 MB

    Memory per request of VFS limit: 400 MB


    CF is currently 1.7 GB of ram


    I have a 6 applications on this server. 1 use the VFS.

    The others are applications simple cfm that have NOTHING to do with the VFS system.


    I have a scheduled task that calls simple cfm pages to update the tables in our database. During her run of these tasks, I get an email from the overall error (which I have the installer if there is an error in CF) and most of the error is

    Browser

    CFSCHEDULE

    DateTime

    {ts ' 2014-08-16 15:07 '}

    Diagnosis

    The overall memory limit 1000 MB for virtual file system in memory exceeded. < br > increase memory VFS limit in the ColdFusion administrator. < br / > the error occurred on line 17.

    GeneratedContent

    [empty string]

    HTTPReferer

    [empty string]

    Mailto

    [empty string]

    Message

    The overall memory limit 1000 MB for virtual file system in memory exceeded.

    QueryString

    [empty string]

    RemoteAddress

    xxx.xxx.xxx.xxx

    I have a utility I can run to show all files in the VFS. and there are currently a total of 8 cfm files that comprise 4064 KB of space in the VFS.

    The 1 application that actually uses the VFS has several functions. Which essentially writes the CFM files includes the MTC as a contained variable and returns the variable.

    Under CF9 we also remove disk ram CFM files after their inclusion. But under CF11 it fails with an error indicating that the modification date is not found. I removed from the part of the file delete and the system works but we get this error of memory with the VFS.

    Can someone shed some light on this for me?

    It's not since.

    Thank you






    I'm sorry to tell someone else that my find this question, I could not solve it.

    Thanks for all your great suggestions and help in the BK.

    We are just past the entire system to the hard drive. This will eventually hurt us in the end, but at this point we don't have an option, our system has been down since the day wherever we improved to CF11. We did a lot of testing before the migration of load and our tests, it worked. But there were many problems with the IIS connectors and we also installed new memory. There has been a lot of things and it is difficult to find the exact cause.

    However, the error should always be reported as a bug. It gives a wrong idea, which is actually the issue and this will lead to someone else in the future in a ghost rabbit hole that does not exist.

    Thank you

    Tim

  • What is "code in the global scope"?

    In Adobe Scout, when you view the Actionscipt Panel, I see that a lot of time spent 'code execution in the context '. Can someone please help me understand exactly what kind of code is would be "code in the global scope"?

    "Code in the global context" refers to the execution of static initialisers. Basically, this occurs the first time that a class is used, so you can see that nested within a call stack - you called a function that uses the X class for the first time, she first run any static initialisers for class X before continuing your code. This includes the code in a static block and the initialization of the static member variables.

    Of course, the name is somewhat confusing: we need to improve it!

  • When updating the password file database

    In our infrastructure, we have several databases (all 11 GR 2 on Linux) who have access to the same password file.

    If the password of a user stored in the password file is changed in a database, this user password is changed in all databases that use this password file.

    If I query the view of sys.user$, I can see when a user has changed, but only for this database and need to check each database to see if the password has been changed for this database. Is it possible to see which update this file to shared password without connecting to each individual database database?

    Thank you!

    Hi Garrett.

    You have active audit? Also, if you have defined AUDIT_SYS_OPERATIONS to true, you should have some information placed in the $ aud. As Joel Suggested, check the timestamp of the change in the password file.

    I think that if you enabled audit_sys_operations, you would also have records written to audit trail operating systems $ORACLE_HOME/rdbms/audit.

    On another note, according to the literature and my test, if the REMOTE_LOGIN_PASSWORDFILE = SHARED, then you could not change the password for the SYS or other users with SYSDBA privilege.

    Take a look on:

    C:\Users\xxxxx>sqlplus / as sysdba

SQL*Plus: Release 11.2.0.1.0 Production on Wed Feb 5 08:17:58 2014

Copyright (c) 1982, 2010, Oracle.  All rights reserved.

Connected to an idle instance.

SQL> startup
ORACLE instance started.

Total System Global Area 1068937216 bytes
Fixed Size                  2182592 bytes
Variable Size             796918336 bytes
Database Buffers          264241152 bytes
Redo Buffers                5595136 bytes
Database mounted.
Database opened.

SQL> show parameter remote_login_passwordfile;

NAME                                 TYPE        VALUE
------------------------------------ ----------- ------------------------------
remote_login_passwordfile            string      EXCLUSIVE

SQL> alter system set REMOTE_LOGIN_PASSWORDFILE=shared scope=spfile;

System altered.

SQL> startup force
ORACLE instance started.

Total System Global Area 1068937216 bytes
Fixed Size                  2182592 bytes
Variable Size             796918336 bytes
Database Buffers          264241152 bytes
Redo Buffers                5595136 bytes
Database mounted.
Database opened.

SQL> show parameter remote_login_passwordfile;

NAME                                 TYPE        VALUE
------------------------------------ ----------- ------------------------------
remote_login_passwordfile            string      SHARED

SQL> alter user sys identified by oracle1;
alter user sys identified by oracle1
*
ERROR at line 1:
ORA-28046: Password change for SYS disallowed

    So, I was wondering if REMOTE_LOGIN_PASSWORDFILE was the EXCLUSIVE value before the change and changed back? This isn't a dynamic parameter, so you will have to restart your DB. Please check if there's any DB restart or change the setting in the alert.log.

    Kind regards

    Suntrupth

  • Move the data files on the standby server without moving primary Oracle 11 g r2

    Hi all


    Oracle 11g 2 with EBS 11.5.0.2 version.

    The size of one of the mounting points on the standby is full and I'm going through one of the data files to another mount point without making any changes to the primary level.

    I tried Google and came across this link:
    http://oraclesea.blogspot.in/2011/12/move-datafiles-on-standby-server.html
    But it did not work... I had to start the database with the spfile to work.

    The steps mentioned in the blog:
    Include below parameter in standby parameter file
DB_FILE_NAME_CONVERT = '/primary_location/xyz.dbf','/standby_location/xyz.dbf'
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE cancel;
shut immediate
startup nomount pfile=initSCSL.ora
alter database mount standby database ;
alter system set standby_file_management='MANUAL' SCOPE=MEMORY ; 
! cp /primary_location/xyz.dbf'  /standby_location/xyz.dbf
alter database rename file  '/primary_location/xyz.dbf' to '/standby_location/xyz.dbf';
alter system set standby_file_management='AUTO' SCOPE=MEMORY ; 
alter database recover managed standby database parallel 4 disconnect from session;
    Can you please help me with the right steps...


    Concerning
    KK

    Edited by: 903150 Sep 26, 2012 22:41

    Here is an example for you.

    Database pending:

    SQL> select status,instance_name,database_role from v$database,v$instance;

STATUS       INSTANCE_NAME    DATABASE_ROLE
------------ ---------------- ----------------
OPEN         srprim           PHYSICAL STANDBY

SQL> select file_name from dba_data_files;

FILE_NAME
--------------------------------------------------------------------------------
C:\APP\SHIVANANDA.RAO\ORADATA\SRPRIM\USERS01.DBF
C:\APP\SHIVANANDA.RAO\ORADATA\SRPRIM\UNDOTBS01.DBF
C:\APP\SHIVANANDA.RAO\ORADATA\SRPRIM\SYSAUX01.DBF
C:\APP\SHIVANANDA.RAO\ORADATA\SRPRIM\SYSTEM01.DBF
C:\APP\SHIVANANDA.RAO\ORADATA\SRPRIM\USERS02.DBF

SQL> select process,status,sequence# from v$managed_standby;

PROCESS   STATUS        SEQUENCE#
--------- ------------ ----------
ARCH      CONNECTED             0
ARCH      CONNECTED             0
ARCH      CONNECTED             0
ARCH      CONNECTED             0
RFS       IDLE                  0
RFS       IDLE                154
MRP0      WAIT_FOR_LOG        154

7 rows selected.

SQL> show parameter name_convert

NAME                                 TYPE        VALUE
------------------------------------ ----------- ------------------------------
db_file_name_convert                 string
log_file_name_convert                string
SQL> alter database recover managed standby database cancel;

Database altered.

SQL> shut immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options

M:\>copy C:\APP\SHIVANANDA.RAO\ORADATA\SRPRIM\USERS02.DBF C:\APP\SHIVANANDA.RAO\ORADATA\DBTEST\USERS02.DBF
1 file(s) copied.

M:\>sqlplus sys/oracle@srprim as sysdba

SQL*Plus: Release 11.2.0.1.0 Production on Thu Sep 27 14:57:16 2012

Copyright (c) 1982, 2010, Oracle.  All rights reserved.

Connected to an idle instance.

SQL> startup mount
ORACLE instance started.

Total System Global Area  778387456 bytes
Fixed Size                  1374808 bytes
Variable Size             494929320 bytes
Database Buffers          276824064 bytes
Redo Buffers                5259264 bytes
Database mounted.
SQL> alter system set standby_file_management=manual;

System altered.

SQL> alter database rename file 'C:\APP\SHIVANANDA.RAO\ORADATA\SRPRIM\USERS02.DBF' to 'C:\APP\SHIVANANDA.RAO\ORADA
A\DBTEST\USERS02.DBF';

Database altered.

SQL> alter database recover managed standby database disconnect from session;

Database altered.

SQL> select process,status,sequence# from v$managed_standby;

PROCESS   STATUS        SEQUENCE#
--------- ------------ ----------
ARCH      CONNECTED             0
ARCH      CONNECTED             0
ARCH      CONNECTED             0
ARCH      CONNECTED             0
RFS       IDLE                  0
RFS       IDLE                155
MRP0      WAIT_FOR_LOG        155

7 rows selected.

SQL> select name from v$datafile;

NAME
--------------------------------------------------
C:\APP\SHIVANANDA.RAO\ORADATA\SRPRIM\SYSTEM01.DBF
C:\APP\SHIVANANDA.RAO\ORADATA\SRPRIM\SYSAUX01.DBF
C:\APP\SHIVANANDA.RAO\ORADATA\SRPRIM\UNDOTBS01.DBF
C:\APP\SHIVANANDA.RAO\ORADATA\SRPRIM\USERS01.DBF
C:\APP\SHIVANANDA.RAO\ORADATA\DBTEST\USERS02.DBF

    1. you must close the database pending.
    2 copy the file that you want to move to the different mount point using the OS commands.
    3. Mount the standby database.
    4 rename the data through database level. Make sure that the standby_file_management is set to MANUAL
    5. start the MRP on the standby database.

    Please do not use more than one response to the thread ID. Because you created this thread with ID 903150, I propose to answer with the same ID, not the ID of the other.

  • cannot addon, can't edit the necessary files; XP and no only installed script

    Have windows XP sp3 and latest firefox, did install no script but cannot install any other addon. Error - Cannot install, not able to edit the necessary files. This allows Java, allowing other addons does not help.
    Unable to create a new profile that the procedures given do not work.
    Allowing all global scripts does not help.

    Thanks for help

    Michal

    Create a new profile as a test to see if your profile is the source of the problems.

    See "create a profile":

    If the new profile works then you can transfer files from a profile in the new profile, but be careful not to copy files corrupted to avoid transporting on the problem.

  • When I run the exe file, it should load the niscope_32.dll why?

    Hello:

    I used scope in my program functions,

    and then I did it in the exe file and the installation file,

    but when I make them to another computer,

    To load the niscope_32.dll, what should I do?

    Hi ylongwu,

    You will need to install the driver OR-Scope on the deployment computer so that the code you can call the driver. You can download the driver from our Web site at drivers and updates the link below by searching our driver OR-Scope and choosing the appropriate version. I also recommend that you include the NOR-Scope driver as an extra Installer for your executable. In the setup of window construction there is a category called additional installers where you can choose the drivers and execution engines to install with your executable file. I've included a screenshot to show what it will look like for LabVIEW 8.x.

    Drivers and updates
    http://Joule.NI.com/nidu/CDs/fn/p/lang/en

  • batch template globals file

    Hello!

    I created a sequence that works for a batch process model that I work on. Batch processing is great and timing factors working as expected, but there is one thing. I have a LabView vi that reads an ini file, displays the "recipe" for the user, allowing them to change the values and then their output to TestStand I send these values to the global variables of various files. The problem is that some update and other that are used in the sub sequences are not updated. If run the sequence without the LabView VI and manually enter variables in TestStand sequence works as it should, but if I run the VI to update the sequence is UUT0 runs the sequcence correctly.

    It's as if copies of the sequence do not accept all the changes only the UUT0, but if I manually insert the variables via the dev environment TestStand that they all work properly.

    Y at - it an update, I have to call to reload the values after I change them?

    I can't use a charger of property because I need it to be dynamic, with a lot of different recipes to test parts. Unless I can find a way to allow the user to choose the file loader to use dynamically

    Sorry I found the answer myself

    http://digital.NI.com/public.nsf/allkb/21368C716B06780A86256A5C007075DB?OpenDocument

  • on the use of the global task

    Hello

    I've been using labview 7 for a long time and I haven't used task. Recently, I've introduced to CVI and I have created all the need for tasks at the launch of the application and reuse tasks before the end of the application. Last week, I received a copy of labview 2013 and I am porting the old code labview for 2013. However, I ran into a problem. Different compiled C code, this code vi must be run each time when necessary, if I create the task on the fly in the vi, it is quite heavy. I would like to create the global tasks so it could be used anywhere, anytime. The example contained in the regulations says that I could create these tasks in MAX. So my question is to use the task only did I specify the name of the task (created in MAX) as the IO channel to use?

    Furthermore, if I create a global task, do I have to delete the task at the end of the application? If I delete the task, global task disappears from the MAX or not?

    Finally, I wonder if it is possible for more than one vi using the same task in different times? For example, I created a global task for the analog output. I run two vi, A and B. A, he use the task to an analogue voltage output while B is something else. After that was done, B uses the same task for another exit. They come in conflict somewhat? What happens if both A and B call the same task at the same time?

    dragondriver wrote:

    ...

    Thanks for the clarification. So it doesn't work if I create two tasks the two links on the same channel and I call these two tasks at the same time, right?

    Time to dig the DAQmx help file and check in the DAQmx state transition table.

    Any number of tasks can be created (any reasonable number).

    If all this stuff is sane the task can be verified (if he calls nonexistent DAQmx hardware raises an error and the task cannot be verified)

    If all resources are available (clocks, roads, channels) can be "reserved" (committed) if something else has booked all the resources the task cannot be initiated and DAQmx generates an error.

    In order to have multiple tasks that use the same chanel is perfectly fine, BUT only one can be in one State other than "Verified" use control Task.vi to explicitly states the task of transition.

Maybe you are looking for