Score of Lenovo K4 and Lenovo A7010 differences

Similar Questions

• Lenovo A7010 unlock

  Hello

  I intend to buy the smartphone Lenovo A7010 in India. I will be in Australia for a few months.

  I just wanted to know if the phone needs to be unlocked or local Australian sims are compatible in the phone?

  Welcome to the arvindmp forums!

  There is no limit when it comes to use the other carrier sim card.

  The most important thing is that if the smartphone supports the national carrier in particular frequencies.

  Here are the specifications of A7010:

  • Data: GPRS, EDGE, HSPA, LTE
  • Speed: LTE TDD band 40/41 NW (2555 MHz - 2655 MHz); FDD Band 1/3/5/7/8/20
  • 3 G network: 850/900/1900/2100 MHz
  • 2 G network: GSM 850/900/1800/1900 MHz
  • Speed: LTE (4 G) 150 Mbps (DL) / 50Mbps CAT4 (UL)

  I used this site to check what majority of frequencies of the use of cerriers.

  It seems that you do not have any ptoblems with the help of the device there.

  Kind regards

• I say 6 layers of an interior of the Hall and the only difference between them is that I'm in different places on the pictures to illuminate different areas with a flash.  I thought that I could retire to each image using a layer mask but it doesn, t seem

  I say 6 layers of an interior of the Hall and the only difference between them is that I'm in different places on the pictures to illuminate different areas with a flash.  I thought that I could retire to each image using a layer mask but it doesn, t seem to work... any suggestions please

  Try this automatic method

  http://phlearn.com/automatically-remove-objects-photos-Photoshop

• Compare 2 different versions of xml and highlite the differences

  Hello
  
  Currently we have xml and which is displayed on the web page using css style sheets.
  The same xml that we remain majority but with small changes (different say version created after a week).
  
  We want to be able to follow the differences with the previous version and highlight the differences, when to display in the web page.
  Please let know us if this is possible and how.
  
  Thank you.

  What is your version of the database? (SELECT * FROM version$ v)

  On 11.2.0.3, update of XQuery can be useful.

  On lower versions, I'd do it like this:

  SQL> WITH sample_data AS (
    2   SELECT xmltype(
    3  '
    4    
    5      7934
    6      MILLER
    7      CLERK
    8      7782
    9      1982-01-23T00:00:00
   10      1300
   11      
   12      10
   13    
   14  ') doc1,
   15  xmltype('
   16    
   17      7934
   18      MILLER
   19      CLERK
   20      7782
   21      xyz
   22      1982-01-23T00:00:00
   23      1300
   24      
   25      10
   26    
   27  ') doc2
   28   FROM dual
   29  )
   30  SELECT XMLSerialize(document
   31           XMLPatch(
   32             doc1
   33           , XMLQuery(
   34              'declare namespace xd = "http://xmlns.oracle.com/xdb/xdiff.xsd"; (: :)
   35               declare function local:copy($itemset as item()*) as item()* {
   36                 for $i in $itemset
   37                  return
   38                   typeswitch($i)
   39                     case element(xd:content) return element {node-name($i)} { {local:copy($i/(node()|@*))} }
   40                     case element() return element {node-name($i)} { local:copy($i/(node()|@*)) }
   41                     default return $i
   42               }; local:copy(*)'
   43               passing XMLDiff(doc1, doc2)
   44               returning content
   45             )
   46           )
   47           as clob indent
   48         )
   49  FROM sample_data
   50  ;
  
  XMLSERIALIZE(DOCUMENTXMLPATCH(
  --------------------------------------------------------------------------------
  
    
      7934
      MILLER
      CLERK
      7782
      
        xyz
      
      1982-01-23T00:00:00
      1300
      
      10
    
  
   
  

  Basically, take us the XMLDiff output and modify it slightly to insert the tag . Then, simply call the XMLPatch function with this newly formed Xdiff document.

  Note that I would normally use XSLT (identity model) to modify Xdiff output but there seems to be a bug when dealing with node Processing, where my using the equivalent of XQuery.

  Published by: odie_63 on September 13. 2012 16:14

• Scores of Boot Camp and Windows 10 anniversary of small size

  I have a Mid 2010 Mac Pro with a score of Boot Camp of 50 (46.7 GB usable) GB with Windows 10 1511 on it (10586 Build).

  I tried to install the update to Windows 10 anniversary but he barfed saying: I have only 6 GB free and he needs 20 GB.

  Almost all of this used 40 GB is the operating system is not as if I have no room to play with.

  I googled a bit and thought, maybe if I wrote the update of the birthday of a USB key, it might work, but it seems that it moves the existing build side and installs a new along?  (I read that you can nuke the old or existing version once the upgrade is done, so I'm guessing.)

  Looks like I'm basically screwed here.  Am I wrong?

  (I tried Paragon CampTune X software on my other Mac - a Mac mini - to try to develop a Boot Camp partition in a nearly empty new installation of Mac OS X, but it just kept gel to the top of the machine and create partitions news/broken, so he is no way trying that on my main bench).

  PS After reading the horror stories of what makes birthday to other non-Windows on the same disk partitions, I'll probably hold off further try everything again - would be good to know if I ever have the option.

  Answered my own question!

  I didn't know the hibernation file.  Disabled ("sleep" mode is good enough for me) and got rid of 16.7 GB of ugly fat.

  Fortunately for 24 GB of free space, so now I can wait for the fix "Windows 10 birthday destroys the other drive partitions"

• Low PCMark score with extra RAM and SSD

  I put an extra 8 GB of RAM Stick, 1600 MHz Crucial exposé Sport x, in a p158sa HP Pavilion 15, most Samsung Evo 128 SSD for the OS. Of 1.5 TB HARD drive is replaced instead of the optical drive. I used to test the performance of the benchmark of release for consumption at conventional speed - 8 PCMark but the score is only 2370, the clock on the memory Bus is 667, and RAM proved to be two bot 8 GB sticks running at 800 MHz, instead of1600MHz. New on PCMark, don't know what that mean all figures, all welcome advice on why the score is low and the speed of the RAM are listed below it should be. (The speed of RAM said Task Manager is 1600 MHz).

  Hello

  You have TWO sticks, which means that the machine is runing and 800 MHz x 2 = 1600 MHz dual channel architecture. I don't see anything wrong with that. Please read more:

  http://en.Wikipedia.org/wiki/multi-channel_memory_architecture

  Kind regards.

• Satellite L450D and L455D - motherboard differences

  Hi all

  What is the difference between Satellite L450D and L455D?
  Can I use L455D motherboard in my defective L450D-128?

  Thanks in advance for any help.

  In most cases by Satellite L445D and Satellite L450D supports similar motherboards.
  The measures of the motherboard are the same, but a different chipset could be used.
  The D in the name of the model (L450D) means that the motherboard contains AMD chipset.

  I recommend you keep an eye on that little detail.

• extremely interesting and urgent - possible difference in appearance of the LUN with and without clichés unexposed to the initiator

  Hello

  I decided to build this case in my testlab, it seems very interesting to me. Someone here in the Group of any idea what could be or already heard of such a case?

  http://forums.Veeam.com/viewtopic.php?f=2&t=15746

  Background / idea: no accessor LUN should never see even the slightest difference between a lun as such and the same lun with snapshots not exposed. This must be absolutely and completely transparent to all - host, the initiator and the engine of the cbt. The only exception would be tools or plugins that take specifically the use of deeply integrated san-snapshot features.

  Best regards
  Joerg

  Question, you use VSM to take the initial snapshot?    If so, the same thing happens if you create a snapshot in Workgroup Manager instead?

• backup and archiving of difference b/w

  I am a new user of fast food.
  Is there a difference in the protection and exploitation of archives.

  Hi akhilms:

  The short answer is that archiving is intended for storage of the previously saved data.

  Simplified data protection process is:

  Base server (with volumes arranged into protection groups)-> RapidRecovery-> backup (organized in recovery points)-> various operations of backup validation (mountability, mimicry, checksum verification, recovery points check etc.) -> Consolidation according to the retention policy planning (i.e. keep all 3 days recovery points, an hour for 2 days, then 1 a day for a week to 1 per month for 3 months then 1 per year for 5 years etc.).

  In addition, you can configure replication by using a different kernel of fast food. The cumulative process would be 'copy' the recovery points from the base of the source to the marrow of replication target. These recovery point would be consolidated as well (most of the time on a different schedule from the retention policy).

  If you feel it necessary to keep one or more strings of recovery (recovery points channels begins with a base image) altered by the cumulative process (consolidation) you can archive them. Archiving does NOT require another nucleus of RapidRecovery. Do that enough space with enough available memory (local, network, clouds) to complete the internal procedures Ops ARE / s a reasonable period of time.

• Change the system configuration and yet no difference in config

  This question is about a router CISCO1941/K9, Version 15.0 (1r) M15.

  When I type

  reload in 4

  He asks me

  The system configuration has changed. Save? [Yes/No]:
  % Please answer 'yes' or «»

  even if

  See the config differences: running system of archives-config nvram:startup

  gives

  ! Contextual Diffs Config:
  ! No changes have been found

  and

  Show running

  gives

  Current configuration: 5031 bytes
  !
  ! No change since the last restart configuration

  My question is: How can I determine WHAT system configuration has been altered?

  As far as I know, the only thing changed is the Terminal length that I occasionally switches for use with the recording of session with PuTTY, which is

  Terminal length 0.

  This router has been in production for months and I don't want to break anything (obviously).  I need to make a change to the configuration of the access-list and wanted to protect me by saying to reload in 4, and then I was probably cancel about 1 minute.  But now I'm worried about it save yes/no question.

  Thank you.

  Hello

  Just save config running and configuration of boot in text files and compare them. Have you enabled all logging on the router?  It may be because of this.

  Just make sure that your configuration register is 0 x 2102. You can see by the show version command

• Hypervisor and virtualization of difference b/w

  Hello

  could someone let me know the difference between virtualization and hypervisor.

  Virtualization is the technology that similar to the concept of Mainframe IBM LPAR and there is also storage and virtualization as Lefthand VSA Datacore SANMelody or network.  You can learn more about Virtualization here http://searchservervirtualization.techtarget.com/sDefinition/0, sid94_gci499539, 00.html# and extracted a hypervisor, also known as a virtual machine Manager, definition is a program that allows multiple operating systems to share a single physical host. Each operating system seems to have the host processor, memoryand other resources all to herself. However, the hypervisor is actually control the processor host and resources, assign what is necessary for each operating system in turn and ensuring that guest operating systems (called virtual PCs) may not disturb each other.

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

  Kind regards

  Stefan Nguyen

  VMware vExpert 2009

  iGeek Systems Inc.

  VMware, Citrix, Microsoft Consultant

• Comparing the sum of the two tables and correct by difference of amount in its second t

  Hello guys,.
  
  I have a very difficult task that I can't get my head around.
  The sample data looks like this:
  
  Master table
  Request - booking - debit - credit - MasterAmout
  1------------1----------------D---------------------------------15.3
  1------------2----------------D---------------------------------480.6
  1------------3------------------------------C-------------------496.8
  ------------------------------------------- 0.9
  
  
  The slave table
  Demande---reservation---debit---credit---slaveamout---slavecorrection
  1------------1------------D------------------------------------15.3---------------14.5
  1------------2------------D------------------------------------480.6-------------480.6
  1------------3-----------------------------C-------------------496---------------496
  -------------------------------------------0.1--------------------------------------0.9
  
  
  The reservation have a total amount of 0.1, but must be corrected to 0.9 because the main table has 0.9.
  
  Reservation 1 requires a correction so the slave table also has a total of 0.9 (business rule is, only corrections on the first booking). So we have
  to change the amount of 15.3 to 14.5. I plan my SQL like this:
  
  1 reservations sum of two tables for each claim. Compare the two for each individual claim.
  2. If Captain sum the amount shows a difference between master / slave
  2.1 select top 1 table reservation slave for the specific claim and increase/decrease by the difference of these two amounts.
  
  Who is?

  Hello

  Use MERGE to actually do the UPDATE.
  The ROW_NUMBER analytic function to identify the first booking in slave (unless you can count on which the reservation = 1).

  MERGE INTO     slave     dst
  USING     (
       WITH     master_summary     AS
       (
            SELECT       claim
            ,       SUM ( master_ampount * CASE
                                     WHEN  debit  = 'D'  THEN -1
                                     WHEN  credit = 'C'  THEN  1
                                 END
                       )     AS balance
            FROM       master
            GROUP BY  claim
       )
       SELECT     s.claim
       ,     s.booking
       ,     SUM ( s.slave_amount * CASE
                              WHEN  s.debit  = 'D'  THEN -1
                              WHEN  s.credit = 'C'  THEN  1
                             END
                ) OVER (PARTITION BY  claim) - m.balance     AS diff
       ,     ROW_NUMBER () OVER ( PARTITION BY  claim
                           ORDER BY        booking
                         )     AS r_num
       FROM     master_summary     m
       JOIN     slave          s  ON     m.claim     = s.claim
       )          src
  ON     (     src.claim     = dst.claim
       AND     src.r_num     = 1
       )
  WHEN MATCHED THEN UPDATE
  SET     dst.debit      = CASE
                      WHEN src.diff      <  0 THEN 'D'
                                     ELSE NULL
                   END
  ,     dst.credit      = CASE
                      WHEN src.diff      <  0 THEN NULL
                                     ELSE 'C'
                   END
  ,     dst.slaveamount = ABS (src.diff)
  ;
  

  If you would care to CREATE TABLE and INSERT statements for the sample data (showing the two tables, as they exist before the DML) then I could test this.

  The design of history seems very uncomfortable. Instead of the debit and credit columns, it would be much simpler to have positive and negative amounts. Is it really worth now both not corrected and corrected the amounts in the table on the slave, especially if you keep only versions corrected debit and credit columns?

• Flash pro and flash builder: difference of resolution

  I have already developed with flash pro for Android (Actionscript 3 - android 2.3.3 - Air 2.6). I try to use Flash Builder (for more developer features).

  But with the same code (an example of Véronique Brossier book) I can not get the same result.

  With flash pro, my three sprites are 150, 350 and 550 pixels high.

  With flash builder, they run over 350, 550 and 750.

  I'have the same result on my device (Galaxy score) or imitated a.

  Flash pro I can specify the height and the width of the stage. I did find the same settings in flash builder.

  What could be wrong in my process?

  the main code is here:

  public void FirstApp() {}

  the constructor code

  var callButton:Sprite = createSprite (0xFF3300, 100, 100);

  callButton.addEventListener (MouseEvent.CLICK, callMe);

  addChild (callButton);

  var textButton:Sprite = createSprite (0x0099FF, 100, 200);

  textButton.addEventListener (MouseEvent.CLICK, textMe);

  addChild (textButton);

  var mailButton:Sprite = createSprite (0x00FF11, 100, 300);

  mailButton.addEventListener (MouseEvent.CLICK, mailMe);

  addChild (mailButton);

  }

  function createSprite(hue:int,_xPos:int,_yPos:int):Sprite {}

  var tmp:Sprite = new Sprite();

  tmp.graphics.beginFill (hue, 1);

  tmp.graphics.drawRect (PosX, Posy, 200, 100);

  tmp.graphics.endFill ();

  tmp.x = xPos;

  tmp.y = yPos;

  return tmp;

  }

  Yes, it is preferable to calculate the dimensions according to capabilies device to accommodate devices with different sizes and screen different portrait/landscape orientation.

  > I try to play with the StageScaleMode value without success. I would get the same result as in Flash pro. Flash pro, I specified the width and height of my internship and I asked an application "full screen" in the settings. Yes, wathever device I use, the application had the same look.

  Do you know if there is a way, in flash builder, in order to obtain this behavior?

  The value default StageScaleMode SHOW_ALL in this case if doesnot display of the device is the size of the scene that you specify in Flashpromanager.new, the content would be to evolve upwards or downwards in order to show all the content of the scene. This may show the borders if the proportions of the scene is not the same as the aspect ratio of the screen of the device.

  If you set it to StageScaleMode.NO_SCALE none of your content would be to evolve which explains why you see small Elves.

  To make it look like Flash Pro, in the SWF meta data tag, enter the height and identical width of Document Pro Flash width and height.

  together left-align at the top that you already do but let the StageScaleMode SHOW_ALL.

• Calculation and display of difference between the two amounts

  Hi all
  
  I have the report in which I am posting two SUM fields at levels of summaries.
  
  <? xdoxslt:sum (LINE_QTY)? >
  and
  <? xdoxslt:sum (INV_DIST_AMT)? >
  
  I want to display another field bordering these fields that will be the difference between these two.
  
  Can you please tell me the function to achieve.
  
  Thank you
  Anish.

  Have you tried this:

  If you want to continue using the scope function, then use

• compare two tables and update the differences

  Hi all
  Sorry for the newbie question, but I am a beginner in the present.
  
  I have two tables, both have same structure-
  
  CODE - code NUMBER (6,0) store is the primary key does not change and is unique
  ADDRESS1
  ADDRESS2
  ADDRESS3 - all VARCHAR2 (100)
  
  One of the tables is named MASTER, the other being updated. MASTER contains hundreds of lines, while the table of UPDATES may have anywhere from zero to 10 or more.
  I want to compare the table of UPDATES against the MASTER of the table and if there is a difference, ask the differences in the table in UPDATES to the MASTER of table - so if the address of an Exchange store, then the change is reflected in the MASTER table by crushing with the data contained in the UPDATES table.
  
  I thought that maybe using sliders and compare each field but there must be a more efficient way.
  
  I hope that I have explained quite clearly... any help would be greatly appreciated.
  
  Thank you
  Bill

  Education MERGE, assuming that your version supports supported the MERGER.

  SY.