Script alert: could not find .js files, even if they are in the folder that the program looked into?

Similar Questions

• Size of different BDB files even if they are now the same data?

  I built a database of BDB (Berkeley DB) with BTREE type. And it does not appear that data, but the sequence data to the database also affects the size of the resulting file of the BDB. Is this the case?
  A detailed below:
  I have a set of data stored in the db. If the elements of this set is put in the db in a random order, the file that results has size SIZE1. If these elements are set in a specific order (the same order as the underlying order BTREE) db, the file resulting a. size SIZE2 While the same set is used, it is NOT equal to SIZE2 SIZE1 (SIZE1 > SIZE2).
  
  I was wondering:
  (1) if it is planned?
  (2) if it is expected, will be the file in this case (data put ordered) most read effective?
  
  Thank you.
  Feng
  
  typo
  Published by: 793526 on September 8, 2010 02:02

  Hello

  In general, the percentage of a page that contains the application
  the data will be higher if the database entries are inserted in
  sorted order. The page fill factor may change the amount
  disk space required to hold any particular DataSet.

  You can find additional information on:

  "Disk space requirements.
  http://download.Oracle.com/docs/CD/E17076_01/HTML/programmer_reference/am_misc_diskspace.html

  "Selection of a cache size.
  http://download.Oracle.com/docs/CD/E17076_01/HTML/programmer_reference/general_am_conf.html#am_conf_cachesize

  Thank you
  Sandra

• I just edit the default profile and no longer see IMAOP files even if they are in the profile. How can I access these

  Hello

  I add to change the settings of an account email (server name has changed) and mail flows always to and from the account. But all mail in the IMAP folder is no longer displayed in Thunderbird just mail that came in since the change. How to restore access to the IMAP folder, the account always uses the IMAP protocol.

  Nigel

  With IMAP, all mail is handled on the server. Therefore, you must not modify the server to an existing account.
  Restore the original server setting. Then create a new IMAP account for the new server.

• I bought the Phs, but creative cloud could not find my subscription. I can't use the Phs

  I bought the Phs, but creative cloud could not find my subscription. I can't use the Phs

  We have sent you a private message, please check and answer.

  Kind regards

  ~ Mohit

• Can someone explain why these two paintings 'look' different even if they are from the same source?

  Hi all!

  I'm just curious, why these two tables are different and are they really different in terms of structure, even if they are from the same source? The left is the exit of tdms get properties and the other is a power of arry auto indexed.

  Nilesh-

  No doubt, you are referring to the visual aspect, since the data are the same. One of them uses a different type of indicator of the chain. You probably click right and choose 'create-> Indicator '. When you perform this LabVIEW will use the same style of indicator as what sub-VI/uses. In case you made directly from the PDM function, but the other was created between the autoindex loop tunnel for, in the second he used everything that was default in your preferences.

• Could not find any file adapter after installing soa 10.1.3.1

  I did the install advanced with 10.2.0.3 Oracle Db and type "J2EE, Web server and SOA Suite server" selected.
  
  I couldn't find the DbAdapter not the FtpAdapter or the FileAdapter or the AQAdapter and the other adapter after Vista 10.1.3.1 and upgrade facilities 10.1.3.4 SOA success. I did a search in SOA_HOME, still could not find them.
  
  In my
  C:\1oracle\product\soa10131\OracleAS_1\j2ee\oc4j_soa\application-deployments\default and
  C:\1oracle\product\soa10131\OracleAS_1\j2ee\home\application-deployments\default records, it contains only the following folders:
  
  DataSources
  defaultWebApp
  jmsrouter_ejb
  jmsrouter_web
  OracleASjms

  Looks like you have an advanced installation, and you run it for a basic installation, try the following

  java -jar admin_client.jar deployer:oc4j:opmn://cyrus004.com:6003/oc4j_soa oc4jadmin welcome1 -deploy -file $ORACLE_HOME\integration\esb\lib\DBAdapter.rar -deploymentName DbAdapter -parent default
  

  see you soon
  James

• Why can't recgnize mozsqlite3.dll Firefox file, even if it is in the program folder?

  bold text A clean installed Firefox 4, six different times. When I try to open Firefox afterwards, a message pop up with that - box 'this application has failed to start because sqlite.dll not found." Every time that the file mozsqlite3.dll has been in the Mozila program file. What I'm missing here?
  The computer that is running Windows XP.

  The only thing that your user agent reveals, is that you use IE8 to post your messages that helps not at all.

  But one thing confuses me with the message error you posted in the image showing firefox.exe could not find sqlite3.dll. It seems to me that you were using Windows 2000 when you took the photo because in the second, the appearance of the title bar changed style of Windows XP (?).

  Could you try doing the following please.

  1. Download version 3.6.17 here: Download Firefox v3.6.17
  2. Follow the same procedure to uninstall/install as in my initial post. This will install the file sqlite3.dll which seems to have been deleted in 4.0.x
  3. When the installation completes, click help . Check For Updates and try and upgrade to 4.0.1 it.

• Could not find output file 'Score_N_Tile_Test.out '.

  Hello

  My problem, after running a VMmark test runs to it, I don't see the 'main' results file as described in the guide. all the files in the results folder are:

  configfiles (folder)

  ClusterVMmapping.txt

  ConfigDS2DB_0.txt

  ConfigDS2WebA_0.txt

  ConfigDS2WebB_0.txt

  ConfigDS2WebC_0.txt

  ConfigOlioJSP_0.txt

  ConfigOlioJSPdb_0.txt

  dat.EIF

  DRSsettings.txt

  DS2WebA0.WRF

  DS2WebB0.WRF

  DS2WebC0.WRF

  EnvInfo.txt

  OlioWeb0.wrf

  ProdMisc.txt

  ProdsVMotion - t0.txt

  ProdVMotion - t0.txt

  profiles.config.VMmark2.client0.json

  rain.config.VMmark2.client0.json

  RMQmgr - out .txt

  Standby0.WRF

  STAX_Job_1.log

  STAX_Job_1_User.log

  SVMotion - t0.wrf

  sVMotion-TargetLUN0 - Poll.txt

  sykdat.EIF

  TimeChecks.txt

  VC - checktime.txt

  VC - collectperf.txt

  VC - listhosts.txt

  VC - listLUNs.txt

  VC - listVMs.txt

  VC-PowerCLI - Info.txt

  VMMARK2. CONFIG

  VMmark2-20130902102954 - PerfOutput.csv

  VMmark2-20130902102954 - TasksOutput.csv

  VMmark2PSbe0.txt

  VMmark2PSbe1.txt

  VMmark2PSbe2.txt

  VMmark2PSbe3.txt

  VMmark2PSfe.txt

  VMotion - t0.wrf

  ________________________________

  But I can not find the results file. So my question is, where is my error in the tool? Or is it my fault? I ignore something? Can I take another file to display values compareable? Just for my own, do not download them on a Web site.

  Attached you will find the VMmark2.cfg file. A comment to this: due to the large number of errors in the time before, the mail server is eliminated in the config file, just to get the error it there in at least all other machines work.

  I also had no errors in the output of VMmark to STAX monitor.

  Waiting for answers,.

  Thank you and best regards,

  Jones

  Salvation Jones,

  This behavior is by design. The file Score_N_Tile_Test.out, which calculates the VMmark score is created only when all workloads are running, which is in VMMARK2. CONFIG:

  WORKLOADLIST = 'MailServer sleep OlioWeb OlioDB DS2WebA DS2WebB DS2WebC DS2DB'

  and

  INFRASTRUCTURELIST = "deploy Vmotion SVmotion.

  Since you have not run Mailserver (and in the provided VMMARK2. CONFIG, you exclude deploy also), Score_N_Tile_Test.out was not created.

  However, you can manually run the script that produces the Score_N_Tile_Test.out and create a partition on a track already done by manually excluding the workload of mail server was not working at the time. In the Guide of the VMmark Benchmarking, see "partial failure or Run no consistent results" for how to do this. However, you will not be able to get a "VMmark Score" which requires that all workloads to run.

  Please let me know if you have any other questions.

  Thank you

  Rebecca

• The instruction at 0x01764b69 referenced memory at 0x00000000. The memory could not be read. Click on OK to terminate the program.

  An error message "the instruction at 0x01764b69 referenced memory at 0x00000000. The memory could not be read. Click OK to terminate the program"appears when I turn off my computer. Could you please tell what is happening with my computer and how to fix it? Thank you.

  Hello

  You did changes to the computer before the show?

  Method 1:
  Run the fix it and check.
  Difficulty of Windows system performance slow computer problems
  http://support.Microsoft.com/mats/slow_windows_performance/en-us

  Method 2:
  Perform a clean boot and check if a third-party software is causing the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.

  Method 3:
  You can diagnose disorders of memory on the computer
  by following the steps in the link.
  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer

  Method 4:
  Run a Microsoft security scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

  Method 5:
  If the above steps doesn't help you can run chkdsk from WinRE (Windows Recovery Environment) mode and look for the question.

  See the following link for more information about system recovery options.

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  See the section: to open the Options menu on your computer system recovery System Recovery Options

  Select the command line option. At the command prompt, type the following command and press ENTER:

  chkdsk drive: / r
  CHKDSK drive: / f

  CHKDSK warning:
  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Previous post: the results.

  Reference links:
  Ways to improve your computer's performance
  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance
  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Previous post: the results.

• New itunes install. All the songs are on an external hard drive. A lot of songs do not show up in itunes, but they are in the folder on the external drive.

  This seems to be a common problem:

  Recently I had to reinstall Win 10 & then itunes. All the songs are on an external HD iTunes does not show a large number of songs that are in the folder on the external drive. I copied the .itl to the new itunes folder. I also tried holding down - from itunes shift - select a library. Any ideas how to be able to see the songs in the itunes on the hard drive folder in the itunes library?

  Thanks in advance

  Steve

  See make a library of portable split. Have you copied the correct .itl file, or should you connect an external hard disk .itl file? If you can find the correct .itl, it should have all your songs and playlists. See the empty/corrupted after upgrade/crash iTunes library when the library has been altered for the first time with the new system. If you have to start creating your new library in an iTunes folder to the root of the external drive and move all the media inside... \iTunes\iTunes Media before adding to the library.

  TT2

• Surface does not find my file even though I've matched

  Separated from this thread.

  When I add device my Surface do find anything, even though I've already associated with them. Now what?

  Hello

  Thanks for posting your concern here at the Microsoft Community forum. Let me help you with your concern.

  There could be problems with the settings or the Bluetooth drivers, where you might face this problem. Follow the steps in this Microsoft article troubleshooting and check if that helps.

  Troubleshoot Bluetooth devices

  http://www.Microsoft.com/surface/en-us/support/hardware-and-drivers/troubleshoot-Bluetooth-devices

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• How to remove com files If you know the name but could not find their file location?

  Hello I have recently concluded that my terminal command:

  pkgutil --pkgs | grep fuse
kextstat | grep fuse

  That's what pops up:

  com.github.osxfuse.pkg.Core

  com.github.osxfuse.pkg.PrefPane

  com.google.MacFUSE.Core

  I want to delete these com files but I can't find them on my system anywhere? Anyone know how I can find them or how to remove through the Terminal? Thank you!

  No, you haven't. Those who are essential to the plug-in you use called OS X Fuse.

• Could not find exported file dump on Linux

  Hi all
  
  
  I have exported my database using "exp" utility on Linux platform, but I forgot to specify any directory, where he created my dump file... Please tell me, how can I find dumpfile...
  
  DB: ORACLE 10g Release 2
  Platform: OEL 4 (Oracle Enterprise Linux 4.4)
  
  Kind regards
  
  Edited by: user11958055 may 18, 2010 12:25 AM
  
  Edited by: user11958055 may 18, 2010 12:27 AM

  Do you remember the name of dumpfile
  If Yes, then

  Find /-name "filename".

  If don't know the name then

  Find /-name ' * .dmp '

  Concerning
  Rajesh

• Could not find job - "Business rule will now run in the background."

  Hello
  
  
  When I run a certain business rule it takes a long time and then up the message = >
  
  "Business rule execution time exceeded the configured maximum wait times. Business rule will now be running in the background. To check the status of the execution of business rule, open the page of the Console to work. »
  
  I opened the console work - navigate / manage / Console library work - but I can't find anything; even when you look at a hidden jobs - but limited to myself...
  
  Is he referring to another console work, if so someone can tell me where I can see the result of the business running rule?
  
  
  Thank you
  
  Robert.

  His reference to the same console to work. You can check if the rule has made the change expected in the data.
  If you're 11.1.1.2?
  How long this rule usually take to run?

  To work this issue autour, you extend the value of timeout for business rules.

  1. Select Administration, then manage the properties.
  2 Select the Application properties to define the properties and values for a planning application.
  3. Add the property by clicking Add, entering the property in the empty line, you enter a value in the property
  Value for both of these.
  -HBR_MAX_WAIT_FOR_RULE
  -HBR_MONITOR_DELAY
  Values for the two columns must be defined in milliseconds.
  4 restart Planning server services.

  Please refer to the Guide to planning administrator for details on the properties of manage.

  Also, take a look on:
  Executing business rule of the warning by calculation Manager "business time rule runs exceeded maximum wait time configured." (Doc ID 1372449.1)

  See you soon... !!!
  Rahul S.

  Published by: Renu on March 1, 2012 16:07

• Firefox manages not to display images much (but not all) on the Web sites that I visit, certain images are displayed and some are not even if they are in the same format.

  I recently changed my ISP because I had connectivity problems. Especially my router would be closed sporadically. As part of my attempt to identify issues, I ran some spyware that I was told that I could trust. Since then, I have a problem looking at many websites as much (but not all) images are missing, even on websites that I know very well, including my own. What is odd, is that on one site each page has an image jpg under the navigation bar and all these jpg appear except for one who does not even appear when I reload images. This problem also makes security of sensitive sites as my amateur full site look Bank that scares me. The problem does not occur on other web browsers.

  What spyware software do you run?

  Make sure that allow you pages to choose their colors and you have not enabled high contrast in the Windows accessibility settings.

  • http://KB.mozillazine.org/Website_colors_are_wrong
  • http://KB.mozillazine.org/Websites_look_wrong
  • Check the permissions for the domain in the active tab in "tools > Page Info > Permissions.
  • Check that the images are enabled: Tools > Options > content: [X] loading images automatically
  • Check exceptions in "tools > Options > content: Load Images > Exceptions.
  • See the tab "tools > Page Info > media ' for blocked images (scroll all the images with the cursor key).

  If an image in the list is grayed out and there is a check mark in the box "block Images of..." and remove this mark to unlock the images from this area.

  There are also extensions (Tools > Modules > Extensions) and security software (firewall, antivirus) that can block images.

  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes
  • http://KB.mozillazine.org/Images_or_animations_do_not_load