Script check boxes 'select all '.

Similar Questions

• Java Script: How to select all corner points?

  Java Script: How to select all corner points in the open document?

  This may be what you're after.

  Do not expect, this works on the complex paths.* *.

  very tight tolerance defined, this can be changed so smooth should not be too smooth.

  //------------------------------------------------------------------------------------
  //          Select "Sharp" or "Smooth" pathPoints
  //------------------------------------------------------------------------------------
  //
  //          Qwertyfly
  //          06/07/2015
  //          Version 1.0
  //
  //------------------------------------------------------------------------------------
  //
  //          *****Do Not expect this to work on complex paths.*****
  //
  //------------------------------------------------------------------------------------
  //
  //          Set tolerance here (this is in Radians)
  var tolerance = 0.0000000001;
  //
  //------------------------------------------------------------------------------------
  var doc = app.activeDocument;
  var myPoint, angle1, angle2, sel = "";
  var w = new Window('dialog');
  var B1 = w.add('button',undefined,"Select Corner Anchors");
  var B2 = w.add('button',undefined,"Select Smooth Anchors");
  var B3 = w.add('button',undefined,"Cancel");
  B1.onClick = function(){sel = "sharp"; goTime();}
  B2.onClick = function(){sel = "smooth"; goTime();}
  B3.onClick = function(){w.close()}
  w.show()
  function goTime(){
      w.close();
      doc.selection = null;
      for(var i = 0; i < doc.pathItems.length; i++){
          for(var j = 0; j < doc.pathItems[i].pathPoints.length; j++){
              myPoint = doc.pathItems[i].pathPoints[j];
              if(sel == "smooth"){
                  if(isSmooth()){
                      myPoint.selected = PathPointSelection.ANCHORPOINT;
                  }
              }else if(sel == "sharp"){
                  if(!isSmooth()){
                      myPoint.selected = PathPointSelection.ANCHORPOINT;
                  }
              }else{alert("error");}
          }
      }
  }
  function isSmooth(){
      angle1 = Math.atan2(myPoint.leftDirection[1] - myPoint.anchor[1],myPoint.leftDirection[0] - myPoint.anchor[0]);
      angle2 = Math.atan2(myPoint.rightDirection[1] - myPoint.anchor[1],myPoint.rightDirection[0] - myPoint.anchor[0]);
      return(Math.abs((angle1 - angle2)) > Math.PI - tolerance && Math.abs((angle1 - angle2)) < Math.PI + tolerance);
  }
  

• Hide the box 'Select all' of line selector

  Hello
  I created a tabular presentation by using a wizard. I have this checkboxr select all in the title. I need to hide (only in this position). This is just to avoid users to select all lines. I want the users to select one at a time. Any help/tips would be great. Thank you

  Hi Alexander,.

  Place this code in the page header.

  Run when the page loads

  $('#check-all-rows').hide();
  

  Kind regards
  Jitendra

• List box select all

  How can I select all the items in a list box.

  The box is filled with the other buttons. Then when I save the form and collect responses, to the item is selected. So I need to have ALL selected by default.

  I'm assuming that when you select items in the ListBox control by hand they appear onn the right data file?

  Here is an example that shows how I did it... unless I'm not understanding what it is you are looking for.

  Paul

• The dynamic expandable boxes - select all / deselect all

  I have dynamic checkboxes in a Repeater.
  
  I want to create a button to select all and clear all who will select each box and uncheck each box respectively. I'm hitting a wall.
  
  Here is the code in the box:
  < mx:Button id = "subCatButtonSelect" label = "Select all" click = "selectAll (); "/ >
  < mx:Repeater id = "subCategoryPickerList" >
  "< mx:CheckBox id = data =" {subCategoryPickerList.currentItem.subCategoryID "subCategoryCheckbox"} "label =" {subCategoryPickerList.currentItem.name} "width ="175"/ >
  < / mx:Repeater >
  
  Here's what I have to select all, which currently does not work:
  
  private void selectAll (): void {}
  var idx:int;
  var len:int = subCategory.length;
  for (idx = 0; idx < len; idx ++) {}
  subCategoryCheckbox [idx] .selected = true;
  }
  }
  
  "Subcategory" is a collection of ArrayCollection providing data for each checkbox.
  
  Any help is appreciated! Thank you very much!

  Hello Tracy,.

  Thanks for the reply...

  In fact, I got this working yesterday. I'm not sure how or why it suddenly started to work, but I did the test you suggested (subCategoryCheckbox [0] .selected = true; a button) and debugged/tested all the individual lines of the function, and it separated. (Yes, the dataProvider for the Repeater is assigned elsewhere - good question however).

  Thanks again for your help!

• Check box selected property based on the EL Expression

  Hello

  I create adf table with af:selectBooleanCheckbox in the first column. the checkbox from always refreshable transitional attribute (boolean).

  in the same point of view, I have an Id attribute also.

  I want to set enabled status this box according to the Id, when I tried to change the selected checkbox true property always, all checkboxes checked and I can change the State active or non-active normally, but when I put an EL expression (#{bindings.) ID not null? ({"true": "false"} box normally checked but becomes readonly!).

  can someone help me?

  using jDev Studio Edition Version 12.1.3.0.0

  I think so

  You check or uncheck the box according to the value in VoRowimpl iteslf.

  It would be nice.

  Concerning

  Vincent

• Show existing check box selected? Boolean is straight 1 or 0?

  I have a box that does not appear what it is...

  < label for = "CAT_Custom_14" > related | {{destination}} < / label >

  < Input id = "CAT_Custom_14" name = "CAT_Custom_14" type = "checkbox" value = "{{destination}}" / >

  linked to the displayed as 1 or 0 in the label...

  so why don't him enter the actual box itself?

  He is editing a page and I don't want to keep re-entry box - when it should show if its been verified or not.

  Thank you very much.

  One thing to note:

  Although everything isn't about finding the value no problem, so I don't think that its irrelevant...

  
  

  I use a template ".tpl" to get the information of... like this...

  {module_webapps, 33366, a template="/tpl/job.tpl",,,true,500,,1}

  so in THIS .tpl...

  I get the details for this...

  {module_webapps, 33363, a template="/tpl/detail.tpl",,,true,500,,1}

  and here is the box called {tab_bound} or {{destination}}

  but neither as value = "{{destination}}" or value = "{tag_bound}" seems to make a difference.

  If you want the box to control, include the checked="checked" attribute.

  If you don't want control, omit the checked attribute entirely.

  Something like:

      {% if bound == 1 -%}            {% else -%}            {% endif -%}    
  

  You can omit the value attribute, it as default on .

• in the Tree control check box symbol

  Hello

  I built a code to use the check box symbol based on the tree and pasted to get the item check box selected.

  In fact, my requirement is to use the tree with the checkbox and make multiple selection and the list of the selected item. I've completed up to the selection of the checkbox, but not able to get the list of all selected items.

  I enclose the code for your reference.

  Please let me know hot to do this, if anyone knows.

  Thanks in advance

  Perhaps this...

• Auto check box when test is entered into a trial field

  Hello

  I was wondering if HRT is possible. I have created a form using Acrobat X and I have a list of software for users to choose with a checkbox next to them. I also have an option for the user of software that was not the name. Is it possible to have this check box selected automatically when text is entered into the text field?

  Thank you

  Of course, you can use a validation script customized to the text field that looks like:

  Custom validation script

  getField("checkbox1").value = event.value? 'Yes': 'Off '.

  Replace 'Yes' with the value of real export of the box (which by default is 'Yes') and 'checkbox1' with the actual name of the corresponding checkbox.

• Try to build the form using the check boxes - need help

  I am creating features using a region on the left to contain what I want (and it is stopped), an area on the right that contains all the rest I might add, with buttons in the middle to get things back (Add/Remove). I try to use the collections and APEX_ITEM. CHECKBOX and everything just do not have luck using the check boxes at all. Can someone tell me please a tutorial or an example that works in the way to read a collection by using the checkboxes and manipulate? Normally, I uses a FRONT of Validations process to update the collection with the changes that the user has provided, then follow up with any validations, then run any what DB written/modifications/deletions in a page AFTER VALIDATION process.
  
  Here's what I have so far:
  
  Area to the left (list of items already included in the package)
  
  (On the process of loading Page (before header) -: P182_PKG_ID is passed as input)

  apex_collection.create_or_truncate_collection
    (p_collection_name => 'DOCWIZ_CHKLST');
  
  declare
    v_lnid      NUMBER;
    v_ordr      NUMBER;
    v_pkg       NUMBER;
    v_type      NUMBER;
    v_typenm    VARCHAR2(47);
    cursor c_prepop is
      select a.ID, a.DOC_ORDER, a.DOC_PKG_ID, a.DOC_TYPE_ID, t.DOC_TYPE_NM
        from DOC_ASSIGN a, DOC_TYPE t
       where a.DOC_TYPE_ID = t.DOC_TYPE_ID
         and a.DOC_PKG_ID = :P182_PKG_ID
       order by a.DOC_ORDER;
  begin
    OPEN c_prepop;
      LOOP
        FETCH c_prepop into v_lnid, v_ordr, v_pkg, v_type, v_typenm;
        EXIT WHEN c_prepop%NOTFOUND;
        APEX_COLLECTION.ADD_MEMBER(
            p_collection_name => 'DOCWIZ_CHKLST',
            p_c001 => 0,          --CHKBX
            p_c002 => v_lnid,     --ID
            p_c003 => v_ordr,     --DOC_ORDER
            p_c004 => v_pkg,      --DOC_PKG_ID
            p_c005 => v_type,     --DOC_TYPE_ID
            p_c006 => v_typenm    --DOC_TYPE_NM
         );
      END LOOP;
    CLOSE c_prepop;
  end;

  Report area (column 2)

  SELECT apex_item.DISPLAY_AND_SAVE(1, SEQ_ID) SEQ_ID,
      apex_item.CHECKBOX(2, c001, 'UNCHECKED') CHKBX,
      apex_item.DISPLAY_AND_SAVE(3, c002) ID,
      apex_item.TEXT(4, c003, 3, 3) DOC_ORDER,
      apex_item.DISPLAY_AND_SAVE(5, c004) DOC_PKG_ID,
      apex_item.DISPLAY_AND_SAVE(6, c005) DOC_TYPE_ID,
      apex_item.DISPLAY_AND_SAVE(7, c006) DOC_TYPE_NM
    from APEX_COLLECTIONS
   where COLLECTION_NAME = 'DOCWIZ_CHKLST'

  Area to the right (complete list of topics already in the package possibilities)
  
  (On the process of loading Page (before header) -: P182_PKG_ID is passed as input)

  --Prep collection
  ---------------------------------------------
  apex_collection.create_or_truncate_collection
    (p_collection_name => 'DOCWIZ_TYPLST');
  
  declare
    v_lnid      NUMBER;
    v_ordr      NUMBER;
    v_pkg       NUMBER;
    v_type      NUMBER;
    v_typenm    VARCHAR2(47);
    cursor c_prepop is
      select 0, 0, :P182_PKG_ID, t.DOC_TYPE_ID, t.DOC_TYPE_NM
        from DOC_TYPE t
       where t.DOC_TYPE_ID not in (select DOC_TYPE_ID from DOC_ASSIGN
              where DOC_PKG_ID = :P182_PKG_ID)
         and t.DOC_TYPE_ID > 0;
  begin
    OPEN c_prepop;
      LOOP
        FETCH c_prepop into v_lnid, v_ordr, v_pkg, v_type, v_typenm;
        EXIT WHEN c_prepop%NOTFOUND;
        APEX_COLLECTION.ADD_MEMBER(
            p_collection_name => 'DOCWIZ_TYPLST',
            p_c001 => 0,          --CHKBX
            p_c002 => v_lnid,     --ID
            p_c003 => v_ordr,     --DOC_ORDER
            p_c004 => v_pkg,      --DOC_PKG_ID
            p_c005 => v_type,     --DOC_TYPE_ID
            p_c006 => v_typenm    --DOC_TYPE_NM
         );
      END LOOP;
    CLOSE c_prepop;
  end;

  Report area (column 2)

  SELECT apex_item.DISPLAY_AND_SAVE(1, SEQ_ID) SEQ_ID,
      apex_item.CHECKBOX(2, c001, 'UNCHECKED') CHKBX,
      apex_item.DISPLAY_AND_SAVE(3, c002) ID,
      apex_item.TEXT(4, c003, 3, 3) DOC_ORDER,
      apex_item.DISPLAY_AND_SAVE(5, c004) DOC_PKG_ID,
      apex_item.DISPLAY_AND_SAVE(6, c005) DOC_TYPE_ID,
      apex_item.DISPLAY_AND_SAVE(7, c006) DOC_TYPE_NM
    from APEX_COLLECTIONS
   where COLLECTION_NAME = 'DOCWIZ_TYPLST';

  Process - before validation page:

   Update Collection
  ---------------------------------------------
  declare
    i pls_integer := 0;
  begin
    for c1 in (
      select seq_id from apex_collections
       where collection_name = 'DOCWIZ_CHKLST'
       order by seq_id) loop
      i := i+1;
      --CHKBX
      apex_collection.update_member_attribute (p_collection_name=> 'DOCWIZ_CHKLST',
          p_seq=> c1.seq_id,p_attr_number =>1,p_attr_value=>wwv_flow.g_f02(i));
      --DOC_ORDER
      apex_collection.update_member_attribute (p_collection_name=> 'DOCWIZ_CHKLST',
          p_seq=> c1.seq_id,p_attr_number =>3,p_attr_value=>wwv_flow.g_f04(i));
    end loop;
  end;

  If anyone has a better way of doing things, I'm ready for it. The standard tabular forms appear not to be the right thing, because there will be TWO shapes on the page, that's why I went with a collection.

  Hello

  I just have a quick look and see what you're trying to do.

  One thing, you might want to consider, is that you use to identify each item (those who become G_F01, G_F02 etc.), index numbers can be any number you like up to a maximum of 50. So, your region on the left could use numbers from 1 to 25 and those rights could use 26 to 50 - little matter if there are gaps in the numbers.

  I'm actually about to close for the day because he went from 19:00 here now, so can't not consider this news right now - but if the above does not do, just update the thread and I'll have another look tomorrow.

  Andy

• Using image resources instead of CSS for JavaFx check box state

  Anyone used a series of resources instead of CSS png for graphics image in the box of JavaFX? I have a tree of the box check according to the content of the tree where I to color some boxes.
  
  Thanks in advance...

  You can use - fx-background-image for the style of the 'brand' that appears when the box is checked. You can also style the "box" which is a part the "brand."
  The box itself is specified in caspian.css as a form, so if you don't want the checkbox, set to null.

  .check-box > .box > .mark {
      -fx-shape: null;
  }
  
  .check-box:selected > .box > .mark {
      -fx-background-image: url("images/duke.png");
  }
  

  You can use several classes of style to the style of the box according to the content of the tree. You probably want to use a cell factory to set the style class on the box (see TreeView #setCellFactory).

  .check-box.red > .box {
      -fx-color: red;
  }
  

• by selecting all the blocks of text on all visible layers

  I want to select all the blocks of text on all visible layers.

  the script below will select all the blocks of text, even in groups, but if the layer with the text is invisible the script error. (target layer cannot be changed)

  If (app.documents.length > 0) {}

  var doc = app.activeDocument;

  var numTextFrames = 0;

  for (i = 0; i < doc.textFrames.length; i ++) {}

  textArtRange = doc.textFrames [i];

  textArtRange.selected = true;

  }

  }

  So I made this script to select blocks of text on only visible layers, but now missing text belonging to a group.

  var layerCount = activeDocument.layers.length;

  var docSelected = activeDocument.selection;

  for (i = 0; i < layerCount; i ++)

  {

  currentLayer = activeDocument.layers [i];

  If (currentLayer.visible == visible)

  {

  for (j = 0; j < currentLayer.textFrames.length; j ++) {}

  textArtRange = currentLayer.textFrames [j];

  textArtRange.selected = true;

  }

  }

  }

  can someone tell me why it is not some frames of text bound in a group when made this way and is it possible to get all managers of related texts selected on all visible layers?

  Thank you

  Duane

  Try this:

  if (app.documents.length > 0 ) {
      var doc = app.activeDocument;
      var numTextFrames = 0;
      for (  i = 0; i < doc.textFrames.length; i++ ) {
          try {
          textArtRange = doc.textFrames[i];
          textArtRange.selected = true;
          } catch (e) {}
          }
      }
  

  Have fun

• Select and deselect all buttons to control list box with check boxes

  I am using the two buttons on labeled select all deselect others all the. These two buttons will check either or unckeck the boxes to tick in a listbox control. I've included the code for the list of regions below. The two buttons are on a separate mxml file. They are labelled by functions id as "selectall" and "deselectall. I think I need to bind the buttons to an arrary you select or clear each checkbox in the list control. Any help you can give me would be great.
  
  <? XML version = "1.0" encoding = "utf-8"? >
  "" < mx:Canvas width = "166" xmlns:mx = " http://www.adobe.com/2006/mxml ' xmlns =" * ">
  < mx:List width = "166" dataProvider = "{region}" >
  < mx:itemRenderer >
  < mx:Component >
  < mx:Canvas >
  < mx:CheckBox id = "complete" selected = "{data.selected}" click="data.selected=complete.selected"/ > "
  < mx:Text id = "TaskName" x text = "{data.label ="23"} ' selectable ="false"/ >"
  < / mx:Canvas >
  < / mx:Component >
  < / mx:itemRenderer >
  < / mx:List >
  < mx:Script >
  <! [CDATA]
  
  Test data for the usefulness of the CBA.
  [Bindable]
  public var regions: Array =]
  {finished: false, label: ' Carolina/Tennessee'},
  {finished: false, label: "Central Texas"},
  {finished: false, label: "Florida"},
  {finished: false, label: "Georgia/Alabama"},
  {finished: false, label: "Great Plains"},
  {finished: false, label: "Houston/Gulf Coast"},
  {finished: false, label: "Illinois/Wisconsin"},
  {finished: false, label: "Kansas and Missouri"},
  {finished: false, label: 'Los Angeles'},
  {finished: false, label: 'Mountain'},
  {finished: false, label: "New England"},
  {finished: false, label: "New York underground"},
  {finished: false, label:' North CA/Nevada '},
  {finished: false, label: "Ohio"},
  {finished: false, label: "Pacific Northwest"},
  {finished: false, label: "Pennsylvania"},
  {finished: false, label:' Philadelphia Tri-St'},
  {finished: false, label: "San Diego"},
  {finished: false, label: "Southwest"},
  {finished: false, label: 'Upstate New York'},
  {finished: false, label: "Balt/Washington/Virg"}
  ];
  []] >
  < / mx:Script >
  < / mx:Canvas >

  First, you must use an ArrayCollection collection and not a table:
  var acRegions:ArrayCollection = new ArrayCollection (regions)

  You will need to loop through the collection ArrayCollection and set the completed property.

  Be sure to use the API of collection correct ArrayCollection to update properties for events will be issued to update the display.

  Tracy

• Check box in the header of the classic report: select all the report Archives

  Hi friends,

  I use Apex 4.2 worm.

  I've created a classic report and create the check box (apex_item.checkbox (1), EMPNO, 'DISABLED' tick,) in this report.

  My Code

  Select * from)

  Select

  apex_item. CheckBox (1), EMPNO, "DISABLED" tick.

  "EMPNO', 'ENAME', 'JOB', 'MGR', 'HIREDATE',"SAL","COMM","DEPTNO. "

  from EMP)

  where)

  InStr (upper ("ENAME"), upper (nvl (: P6_REPORT_SEARCH, "ENAME"))) > 0 or

  InStr (upper ("JOB"), upper (nvl (: P6_REPORT_SEARCH, "JOB"))) > 0

  ) and

  (nvl(:P6_ENAME,'0') = '0' or ENAME =: P6_ENAME) and

  (nvl(:P6_JOB,'0') = '0' or JOB =: P6_JOB) and

  (nvl(:P6_MANAGER,'0') = '0' or MGR =: P6_MANAGER)

  and

  (nvl(:P6_DEPT_NO,'0') = '0' or DEPTNO =: P6_DEPT_NO)

  I need to create the checkbox in the header of the classic as tabular report where if I click in the header box then all archives should be checked.

  How can I do this with classic report.

  If you want to see this issue in the workspace, then you can use the workspace details below

  Workspace: APEX_ISSUE

  User name: [email protected]

  Password: kaushik1@34

  Page no.: 6

  Thank you

  Hi Maxence,

  The above problem is solved. Please check the same.

  I added the following code in the header of the first column:

  NOTE: I used Carl Backstrom solution for this: Blog of Carl Backstrom: Mini check all HowTo

  But this solution works only when the first column in your report / table is a checkbox.

  If you have more columns rather than the first column where you want to check and uncheck all the features then follow the solution of Jeff Kemp:

  http://jeffkemponoracle.com/2012/11/15/select-all-Unselect-all-checkbox-in-interactive-report-header/

  I hope this helps!

  Kind regards

  Kiran

• Add "Select all" check boxes in Forms6i

  Hello
  I need to add "Select All" checkbox functionality in my Froms6i.
  There is a Block (tabular) in detail in my form, with an agenda of the box NBT.
  There is an another box in my block (header) of control with a label of "select all." Checking this box all the boxes in the block of detail should be checked.
  Just like the basic features that we use in our mailbox.
  How do I get there?
  
  
  Kind regards
  Manish

  Hello

  What you have to do is to loop through each record in the detail block to set the value of the checkbox "checked".

  ...
  Go_Block('detail');
  first_record;
  loop
    :item.chkbox := '1' ; -- value when checked
    exit when :system.last_Record = 'TRUE' ;
    next_record ;
  end loop;
  ...
  

  François