Script Pixelbender filters

Similar Questions

• Create new Pixelbender filters when running

  Anyone know if it is possible to create PixelBender filters when running?
  I want to be able to load any kernel of .pbj during execution to create a new filter.
  I think that the problem is with the embed tag. There is no way that I know how to dynamically generate the path of the CBC to the embed tag, it must be hard-coded.
  

  The following example is from the documentation from Adobe on the Shader. You can easily switch the PBJ you wanted to load it into the application. Once loaded, you can then apply or use it as an instance that has been incorporated.

  http://help.Adobe.com/en_US/ActionScript/3.0_ProgrammingAS3/WSB5D89F6A-065F-4b18-A163-D421 90DB7ABE.html

  var loader: URLLoader = new URLLoader();
  loader.dataFormat = URLLoaderDataFormat.BINARY;
  loader.addEventListener (Event.COMPLETE, onLoadComplete);
  Loader.Load (new URLRequest ("myShader.pbj"));

  var shader: Shader;

  function onLoadComplete(event:Event):void {}
  Create a new shader and set the data loaded as its bytecode
  Shader = new Shader();
  shader.byteCode = loader.data;

  You can also pass the bytecode to the Shader() constructor like this:
  Shader = new Shader (loader.data);

  do something with the shader
  }

• Grid Photoshop layer?

  Is it possible to transform the grids in a layer? I know it can be done with the leak point filter, but can be done with normal grids?

  I ask because grids are very useful but sometimes get in the way. If I could create a layer of my grids I could then turn them back on if necessary power on and off.

  I use Photoshop CS6 on Windows.

  Thank you!

  Grids in Photoshop are not convertible to pixels/layer.

  There are scripts and filters that will make grids.

• Can I use the awesome < s:AnimateTransitionShader in something else that changes of State

  Is it possible to use the < s:AnimateTransitionShader in something else the state changes as theres pb cool stuff you can do like here: http://www.justsuppose.com/getting-fancy-with-Flex-4/

  < s:transitions >
  < s:Transition fromState = "" * "toState = 'log_in' >"
  < s:AnimateTransitionShader target = "{}" duration = "1000".
  shaderByteCode="@Embed (source =" nikos/pixelBlender/HexCells.pbj ', ")
  mimeType = ' application/octet-stream') "/ >"
  < / s:Transition >
  < s:Transition fromState = "" * "toState =" * ">"
  < s:AnimateTransitionShader target duration = "{logo}" = "3000".
  shaderByteCode="@Embed (source =" nikos/pixelBlender/Twist.pbj ', ")
  mimeType = ' application/octet-stream') "/ >"
  < / s:Transition >
  
  < / s:transitions >

  Hello

  If you just want to use pixelbender filters you create a task of shader and use any animation you want...

  http://gumbo.flashhub.NET/menu/ this example uses a filter for the melted cross effect

  http://gumbo.flashhub.NET/reflect/ that uses a pixelbender filter in a skin to create a reflection effect

  David.

• Problem with GREP search styles

  Hello

  Here's a script that finds all one to three digits and then selects only those numbers that are in exponent or use the style police by exposing open type.

  This works if I'm looking for just any of these styles, but not both at the same time. When I use the script as written below to find the Exhibitor open Type or by exposing that he finds all the numbers. Why is this happening?

  In addition, I built the script that filters all the figures for these styles, because I couldn't see how I could create a script that uses GREP itself searching for character styles.

  Any help would be appreciated.

  Thank you

  Tom

  myDoc var = app.activeDocument;
  table below is all the figure of one to three words.
  Notes end var = theGrepFinder (myDoc, "\\d {1,3}");
  Here is a filter to get only those who are exposing (1936749411) or use SuperScripted (1884247155) of open Type.
  var arrFiltered = [];
  for (var a = 0; endNotes.length > a; a ++) {}
  If (end notes [a] .position == 1936749411 |) {1884247155)
  arrFiltered.push (endNotes [a]).
  } / / end if
  } //end for
  Endnotes = arrFiltered;

  functions *.
  function theGrepFinder (docRef, grepFindIt) {}
  app.findGrepPreferences = NothingEnum.NOTHING;
  app.changeGrepPreferences = NothingEnum.NOTHING;
  app.findGrepPreferences.findWhat = grepFindIt;
  var arrGrepFindIt = myDoc.findGrep ();
  Return arrGrepFindIt;
  } //end theGrepFinder

  I think that your test should be formulated as follows:

  If ((notes de fin [une].position == 1936749411) |) (notes de fin [une].position == 1884247155))

  As JavaScript OR is inclusive, this test passes if both parties are met.

  Peter

• script filters

  Hi all

  I'm new to photoshop script.  I've been through the CS5 javascript reference and try to understand how script filters.  I see stuff there, like applyGaussianBlur, but I can't seem to find any filters that are available through photoshops GUI, for example that all those under filter-> artistic, filter-> blur, filter-> brush strokes, etc.  Is it possible to make this script and modify their settings as well?

  Gene

  For filters not in the DOM, you must use scriptlistener. For example, here is the output of hatch scriptlistener js

  var idCrsh = charIDToTypeID ("SSHRC");
  var desc1734 = new ActionDescriptor();
  var idGEfk = charIDToTypeID ("GEfk");
  var idGEft = charIDToTypeID ("hosnyy");
  var idCrsh = charIDToTypeID ("SSHRC");
  desc1734.putEnumerated (idGEfk, idGEft, idCrsh);
  var idStrL = charIDToTypeID ('StrL');
  desc1734.putInteger (idStrL, 11);
  var idShrp = charIDToTypeID ("Shrp");
  desc1734.putInteger (idShrp, 15);
  var idStrg = charIDToTypeID ("Strg");
  desc1734.putInteger (idStrg, 2);
  executeAction (idCrsh, desc1734, DialogModes.NO);

• How to get rid of scripts

  When you try to download a YouTube video, I get a black screen and later a message on the saying, "unresponsive script or may not work. My OS is win7.

  Another common cause of errors in script does not work on Windows 7 is the feature of mode of the Flash player plugin. This feature has the security benefits, but it seems to have serious compatibility problems on some systems. There is a hidden parameter to disable; I suggest to try it for a day to see if that helps you:

  (A) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (B) in the search above the list box, type or paste the flash and make a pause so that the list is filtered

  (C) double-click the preference dom.ipc.plugins.flash.disable - protected mode to change its value from false to true.

  It cannot take effect until all the Flash was discharged for a few minutes, or you close Firefox.

  Any difference?

• 31 Firefox should run Greasemonkey scripts on POST pages

  The update of Firefox 31 broke Greasemonkey 2.1 features. Greasemonkey scripts don't work anymore on the pages that are displayed in the form of a response to a MESSAGE event. Works fine, once again, when I go back to 30 of Firefox.

  Steps to follow:
  -Install https://addons.mozilla.org/en-US/firefox/addon/greasemonkey/
  -Install https://www.eclipse.org/jdt/ui/scripts/jdtbugzilla.user.js
  -Go to https://bugs.eclipse.org/bugs/query.cgi?format=advanced

     => page is correctly tweaked (e.g. "eclipse bugs" header image removed)
  

  -Select some filters (e.g. Target Milestone M1 4.5), and then click Search

     => result list is not tweaked (e.g. bug summaries are underlined)
  

  The first action of the script is the following, which is not executed on the MESSAGE page:
  Console.log ("Running jdtbugzilla.user.js we" + window.location);

  Classified https://github.com/greasemonkey/greasemonkey/issues/1977 for this, but the bug might as well be in Firefox. Maybe same question as https://support.mozilla.org/en-US/questions/1012688

  With the news of https://github.com/greasemonkey/greasemonkey/issues/1970 , I could write this script to workaround for 31 FF:
  https://www.Eclipse.org/JDT/UI/scripts/jdtbugzilla-start.user.js

  This model could help others to create workaround for their broken pages:

  // ==UserScript==
  // @name        Remove history.replaceState from buglist.cgi
  // @description Removes history.replaceState from buglist.cgi to work around https://github.com/greasemonkey/greasemonkey/issues/1970
  // @include     https://your/page*
  
  // @version 1
  // @grant       none
  // @run-at document-start
  // ==/UserScript==
  history.replaceState = function(data, title, url) {
  	console.log("caught history.replaceState(" + data + ", " + title + ", " + url + ")");
  };
  

• A report script.

  I did the following steps:

  Created a report model (page).

  Each page has 4 cards

  1 X, Y, Z plot (the accelerometer data)

  2 FFT transforms (1).

  3 and 4 are the same for the next channel, and there are 5 total channels.

  Looking dialog box Definition of curve and the axis, it shows the type, color, y axis (which are all Y1), X (white) and Y-way (my data).

  What I try to do with my script, it's that it can scroll through all the data and draw using the specified model.

  Each channel is labeled "N X (filtered)" where N is 1-5, and there is a X, Y and Z.  The FFT is labeled: 'N X (filtered) FFT' with all of the channels.

  Hope it makes sense.

  Thank you.

  Hi Worldtraveller,

  I sent the solution I created directly to you, Yes.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Get a ref to a newly-created channel script

  I'm a noob to scripting tiara and it's been well over a decade since I did any significant vb coding, so please forgive me for what is inept.

  I use the function ChnFiltCalc to operate my data by a low filter pass, and this function automatically creates a new channel containing the signal filtered at the end of the group.  In the data portal that I would move the new channel so that immediately follow the unfilitered channel, it is, however, ChnFiltCalc is not a reference to the new string.  In addition, the new channel may or may not use the name I assigned to it (Tiara will add a number if it's a duplicate name) and based on what I read in the help files, it may be the element with the largest index.

  Is there a standard way of robust way get a reference to the new channels created by the functions?

  Hi Rose Dalban,.

  My personal preference must first obtain a channel object variable when you create the target channel in the Group and the location of the channel (TargetChannelIndex) that you want to be (where the name of the desired channel will be unique), then go this channel object variable to the order of ANALYSIS in his channel of target setting.

  ' Set Group = Data.Root.ActiveChannelGroup
  
  ' Set Group = Data.Root.ChannelGroups (1)
  
  Set Group = Data.Root.ChannelGroups ("DesiredGroupName")
  
  Set RChannel = Group.Channels.Add ("result Channel", DataTypeFloat64, TargetChannelIndex)
  
  Call ChnFiltCalc (XChannel, YChannel, RChannel,...)

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• disabled Windows script host

  This morning I uninstall an onr free hour game of the trial when windows script host disabled on my computer message sent yesterday and the machine he could not preform an e-mail, which by default e-mail client has not been installed correctly. I installed windows live xp. He said to put by default for mail & that it was important to put it in the section custom value access to the programs, without the computer, then restart. I don't know if this is where it should be. I can't email in my msn hotmail unless the address is in my contacts? something, my daughter made for me to stop unwanted emails. I don't know if I wanted to get the message? I use my yahoo mail so I can get assistance and a lost etc password.  * E-mail address is removed from the privacy *

  You might see...

  Help! My computer is slow!
     http://miekiemoes.blogspot.com/2008/02/help-my-computer-is-slow.html

  List of troubleshooting for a slow computer
     http://www.bleepingcomputer.com/forums/topic44694.html

  What to do if your computer is running slowly
     http://www.malwareremoval.com/tutorials/runningslowly.php

  ======================================================

  In regard to your Hotmail problems, you might see...

  New improved Hotmail rules
     http://windowslivehelp.com/solution.aspx?SolutionID=7fd4e9c2-2a72-4E25-Badb-bee5f881c7b7

  I don't receive mail sent by friends/family [or other shippers]
     http://windowslivehelp.com/solution.aspx?SolutionID=5b7bdb98-cda9-4B5F-9d05-e412a6a2343a

  How to set the junk e-mail filtering level:
     http://windowslivehelp.com/solution.aspx?SolutionID=9a423c4e-1fe5-4697-9420-d3164ec7d50b

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You will find support for Windows Live Hotmail in these forums: http://windowslivehelp.com/forums.aspx?productid=1

  In these forums, you will find support for Windows Live Mail : http://windowslivehelp.com/forums.aspx?productid=15

  [Yes, the names are very confusing. What were thinking? ]

• DMM / SnS and definition of filters

  When you set filters in your DMM to import your Active Directory domain users, is there a way to move these specific users see the and hand Rolls (Editor / author)?   Maybe it's a side script thing SnS, but I have not found this process.

  Here is a current example of a DMM import which does not place users in the rolls, but they Gets a DMM group.  I would like assigns combining Show and part editor and / or rolls of the author.

  (&(objectclass=user) (memberof = CN = MVTC OR = Cisco, OU = Groups, DC = domain, DC = wfu, DC = net))

  I agree, it would be nice, but there is no way to automatically assign roles to a user group.  Have users in groups makes it easier to manually assign roles well.

• VCS CPL rule filtering of IP addresses

  Hi all

  I have a CPL script which change each alias entering Internet alias AutoAttendant MCU.

  But I would like to allow known, identified by their IP address, websites to call directly to the internal endpoints.

  I found, I can check with a

  but I coulnd find how to test IP Address. Only aliases are checked.

  Do you know it is possible to filter endpoints with CPL, based on IP address?

  Regards,

  Guillaume

  As far as I am aware, there is no way to filter by IP address in the reduced CPL that is implemented on the VCS/Expressway.

  Is there a reason why you can't filter by alias instead of IP address? When it comes to hacking, spoofing IP addresses is just as easy as aliases, so that really does not provide any additional layer of security.

  I would probably just add additional rules for each alias you want to have the ability to call inside, or if they are coming from a specific domain, the (.*)@domain will be a catch all to those from another expressway or equivalent.

  Otherwise, if you must use IP address filtering, you would have to do it in the firewall, by making a set of rules to block all IP addresses, then making another rule for the desired IP address, set it to allow, and make it higher priority than the first rule. Then delete your CPL.

  I would probably not go that direction, as it would be very limiting, and the firewall rules in the expressway are a pain to configure. (also would still leave you vulnerable to IP address spoofing)

• Member name change - replace in all security filters

  Hi people,

  We have a system of planning right now that we use to build a cube ASO (by ODI). Users now want to rename a member in the planning.

  However, I have several security on the ASO cube filters which mention this member name name in the filter list. Is there an easy way to replace this name in all of the filters?

  PS: I did not write the original filters so do not have their orders create. I'm looking for alternatives such as LCM. However, I wanted to check if there is an easier way out.

  Kind regards

  Sylvie

  You can make LCM and filters are extracted in the form of files. Write a script of the BONE to replace the name of the Member. Or even open in Notepad ++ and replace all occurrences in the open documents.

  If looking MaxL route, I have an EXCEL macro that retrieves the filter from the server, then you can use it to generate the creation of MaxL script. Essbase filters export the server, and then re-create ~ Oracle - Hyperion Labs...

  Concerning

  Celvin Kattookaran

• Use a script to view specific content

  Dear HR experts,

  I'm setting up a support system of HTML5 for a web-based software application that has two versions: Cloud and on site. Support systems have some will share content and specific content. I could define conditions on the topics and generate two separate help systems. But my developers as a more elegant solution. They don't want to duplicate content. Instead, they want a single output, and they want to use tags and scripts in headings to identify the content that needs to be shown or hidden dynamically, depending on the version of the product. The script would be executed when the help system is launched, and would display the appropriate content based on tags.

  Does anyone know how to do this?

  This would have implications for research? For example, search results would include hidden items based on tags and scripts?

  Thank you!

  -Kate

  Environment:

  HR 2015 on Windows 7

  Content in FrameMaker

  Just another thought: If you enable the filters, you can HIDE the sidebar filter selector. In this way, your readers will not be able to change the filter conditions themselves.