Script runs only if the group exists.

Similar Questions

• How to create a banner size mouseover who starts running only at the end (in Adobe Edge animate)

  A banner general practice is to have the entire banner be clickable as well that trigger the mouseover and mouseout/mouseouthandler().

  In flash, you would do an invisible button that captured the events, and then looks like an internal chronology of a chart of the CTA to play and which would scale upward.  I would also (in the main scenario where all the basic animation) a fade in opacity to the top of the CTA at the end Flash would allow me to set the rollover and rollout on the last image, so no features a rolling code would execute while the button was in invisible state.

  Along the busy, I know how a symbol, with an internal chronology which can evolve the assets. I know how to use the action of another layer to speak to this chronology of symbols and to play and to reverse the trend.

  But I can't understand how the mouseover and mouseout/mouseouthandler() code to run ONLY when the banner has played through the main timeline animation.

  Thank you.

  make a layer/button which is at the top with a transparent png of the size of your project. First frame of the main timeline, the value to display last image off the coast, it appears on the value.

• Error after running system update: "the Group Policy Client service has no logon. Insufficient system resources exist to complete the requested service".

  Original title: run windows Vista Ultimate 32 - is system update, get now

  Facts: OS Vista Ultimate 32 bit

  Antivirus - Eset NOD32
  ESET prompted me to leave with the latest updates window, made it regularly, menu updates box Eset Windows open.  I accept the standard updates. Computer needs to restart to complete the installation.  I accept.  Windows restarts comp, I connect, BONE implements internal whatnot.  Screen turns off, a blue screen, stop, restart cycle begins = restart - screen down - blue - boot in SafeMode etc.   Finally, I use the Vista ultimate installation disc to break the cycle.    I repair the startup procedure, then restore point 3 days for a previous backup of the system.  Now I get "The Group Policy Client service failed the logon.  Insufficient system resources exist to complete the requested service".
  What should do? What should do?  Buy a Mac?

  Hello PatrickRatley,

  Often we see odd behavior as the result of a program from loading at startup.

  To solve these, we use the clean boot troubleshooting.

  The following article describes this process:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If it does not and this ends up really being something to do with group policy, you can post in our TechNet forums:

  http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro

  Best regards

  Matthew_Ha

• Add the article to the group existing Captivate 7

  Is it possible to add an item to an existing group in Captivate 7? The only way I seem to be able to change the items that are part of the group is to dissociate and create another group with the items I need in there.

  The problem I have with it is that I can't reuse the name of the group as it appears to be stored by the project. Thus stocks advanced as I write to you which are based on the name of the group then must be updated whenever a change of name of the groups.

  Even though I am on, is there a way to remove the name of a group to allow re-use?

  Thank you.

  Select the new image and the existing group, right-click and select group (or simply press Ctrl + G). The new image is added to the existing group.

  Anthony

• Transformation of Scripts that run only on the selected Tables

  I'm relatively new to Data Modeler, but found almost everything to be very intuitive. I'm now doing use custom transformation scripts to dynamically add custom DDL elements. I wrote a transformation script that adds a sequence at the end of my DDL trigger successfully, and I'm happy with the results. The problem I run into is that we have two different categories of tables that require slightly different sequence triggers, but as my model is set to the level of database, my transformation scripts are applied to all arrays regardless they come what schema. Do you have any suggestions on how to limit the tables which proceeds by a transformation script? I thought to add if statements to check what schema tables are coming from, but if I have a situation where I have two different tables that require two different processing scripts, but they are in the same pattern, how can that I manage that? Ideally, I'd like to just pick a table and apply a transformation script for this table individually. Is this possible?

  I work in a relational model with Data Modeler 4.0.

  to dynamically add items customized to DDL

  you need to check the custom of DDL in DM 4.1 features - "tools > rules and design transformations > Table DDL transformations"-DM 4.1 comes with example to generate tables of the newspaper and associated trigger.

  . I wrote successfully in a transformation script that adds a sequence at the end of my DDL trigger

  Data Modeler can generate the sequence and relaxation for you - you need to define the column as 'auto increment' / identity and set in preferences, you want "trigger" put in place. 4.1 DM added support for z/OS, DB2 LUW DB2 and MS SQL Server 2012.

  Do you have any suggestions on how to limit the tables which proceeds by a transformation script? I thought to add if the instructions to check the schema, the tables are coming, but if I have a situation where I have two different tables that require two different processing scripts, but they are in the same schema

  Well you need to sort it out on yourself - you can use classification types, dynamic properties user defined properties (in DM 4.1) or put paintings in various subviews or use the search feature (4.0.3 DM / DM 4.1 comes for example how to use the search results to create subview).

  Ideally, I'd like to just pick a table and apply a transformation script for this table individually. Is this possible?

  Here is an example of how get selected tables:

  appv = model.getAppView();
  dpv = appv.getCurrentDPV();
  //check there is a diagram selected and it belongs to the same model
  if(dpv!=null && dpv.getDesignPart() == model){
   tvs = dpv.getSelectedTopViews();
   for(var i=0;i
  Philippe
  		   

• Agent script - runs only once.

  Hi all

  I wrote a custom script agent that uses a file of DOS commands to run a powershell script that creates a text file, then type this file on the screen.

  The content of the text file is here:

  TABLE PT_GBES02_USER_COUNT

  START_SAMPLE_PERIOD

  Host.String.id = ukstrgbes02.peroot.com

  PT_GBES02_USER_COUNT = 410

  END_SAMPLE_PERIOD

  END_TABLE

  The batchfile BACK content: (PT_GBES02_USER_COUNT. BAT)

  off @echo

  PowerShell-folder e:\Scripts\CountUsers.ps1

  type e:\scripts\usercount.txt

  Content of the powershell script.

  $usercount = (get-ChildItem E:\PST-filtre "GMS-BlackBerryServer *.pst.db"). County

  Clear-Content E:\Scripts\UserCount.txt

  E:\Scripts\UserCount.txt Add-Content "TABLE PT_GBES02_USER_COUNT".

  Add content E:\Scripts\UserCount.txt "START_SAMPLE_PERIOD".

  Add content E:\Scripts\UserCount.txt «Host.String.id = ukstrgbes02.peroot.com»

  Add content E:\Scripts\UserCount.txt "PT_GBES02_USER_COUNT is $usercount".

  Add content E:\Scripts\UserCount.txt "END_SAMPLE_PERIOD".

  Add content E:\Scripts\UserCount.txt "END_TABLE.

  I created the agent and deployed the agent on the server. The agent runs the script once but not again. I need to run periodically.

  Every time I have stop and start the agent running the script once but again its not repeated. I do not also the agent Agents/hosts with agents screen

  but it is visible in the agent status page.

  I have written other agents of script (even if not using powershell) and they all seem to be normally repeats.

  The only messages in the log file are

  2012-11-09 09:25:36.934 ECHO VERBOSE [IncomingMessage-4444] com.quest.glue.core.agent.AgentInstance - starting data collection

  2012-11-09 09:25:37.293 ECHO INFO [IncomingMessage-4444] com.quest.glue.core.agent.AgentInstance - started data collection

  No idea what I did wrong?

  Hi John, it is resolved. It was the command line I used to start PowerShell

  I replaced the bottom and everything works fine now

  PowerShell - ExecutionPolicy RemoteSigned-NoProfile interactive non - command -.<>

• loop running only when the mouse or keyboard are active

  Hello

  I started a few weeks ago a pretty big VI. Most of the program is included in a large loop. But I feel it's to slow down unnecessarily. So to optimize it, I would like that the VI only works when the mouse or keyboard is acting on it. It would free up the CPU when I do not use it without having to shut it down. I found on the internet how to use the "wait for" to slow down the loop, but in doing so, some parts of the VI that must run in real time also slow down. I think that my idea should be more effective as well for applications in real-time and to free the memory.

  Accordingly, how can I ask the while loop to skip to the next iteration only when you press the mouse button or when a field is filled by the keyboard? Or is there an alternative for the while loop?

  Thank you

  Isaac

  Hello

  You can check this by using the structure of the event and monitor the activities of the mouse and the keyboard.

  I have change a simple VI to show this, please see the attachment.

  

  In the meantime, you can consult this example available on ni.com

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/3924

  Kind regards

  Lou KwokHow

  AE OR Singapore

• Script works only on the first occurrence of a masterpage

  I adopted a dynamic shape on LiveCycle to maintain and update. I have no programming experience, but are working with LiveCycle for over three months to know that I'm going every day.

  I have a problem of script that I don't know how to handle. I use javascript. I currently have a script that will look at the < State > tag to an xdp. If the value < status > is a certain State, then a text in the subform 'footer' of a master page will be hidden while another text with a larger font becomes visible.

  if (xfa.datasets.data.job.data.state.value, == , "NJ") { }

  jobs. MasterPages.Liability_Continued.footer.liabilityFooterBig.presence = 'visible ';

  jobs. MasterPages.Liability_Continued.footer.liabilityFooter.presence = "invisible";

  }

  My problem is that the script only works on the first instance of the master page. On all other occurrences, it always displays the text smaller.

  I tried the script on initialization, enter, exit, calculate, validate, validation status, presave, postsave, preprint, post-press, presubmit, postsubmit, docready, docclose, form ready, ready, available and index change the subform "footer" events, but these events have not worked at all, or only worked on the first occurrence of the subform.

  How can I get the visibility of these text objects to change all occurrences of the subform?

  Hello

  There are two possible options. We need to loop through all instances of the Master Page and change the presence of objects on each instance. The other would be to have the script in the event layout: ready for each of the objects referring to this.presence = "invisible";

  Thus, for example, if your Master Page named Page1, then this should work:

  var oMaster = xfa.resolveNodes("Page1"); 
  
  for (var i=0; i
  The exact reference in the script would be according to your hierarchy.
  Niall
  		   

• Extension manager CS5.5 runs only under the non-administrator user

  I can see the program running in the background, but it just never came up.  If I select 'run as administrator' opens the program, but only allows me to install extensions for the administrator account.

  What operating system do you use? Have you tried the solutions that you can find in this forum? As uninstall FlashFireBug, deleting files from trusted FlashPlayer, granting privileges to certain folders.

• Script runs differently from the ESTK and Scripts panel

  Recently I talked to a problem with one of my scripts, which packets of identity papers: a guy wrote to me that when it run ESTK, the script works fine, but when it is run from the Scripts panel - creating empty folders, does nothing more but an error (there is an error handler in the script that records the errors in a text file) :

  Error: Invalid value for parameter "versionComments' event 'packageForPrint '. Expected String but received TRUE.

  It's strange, because I do not use this optional parameter in the script.

  BTW, on my computers, it works well, both ID and ESTK.

  Someone has experienced this problem? Any ideas on why this is happening?

  Kasyan

  It probably has its version scriptPreferences value 5. To make your script foolproof, you probably set the scriptPreferences (and restore them when we have the gift of being nice...)

  BTW, kAppVersion = parseFloat (app.version) is a more readable form to get the version number...

  Substances

• What can I do if the script runs faster than the network?

  I wrote a script between applications moving to InDesign, where he begins to AppleScript, to Photoshop, which AppleScript runs a JavaScript script to perform various tasks.

  It works beautifully on my laptop at home where I do my development. Yesterday, using me as a Guinea pig, I tried it in the office.

  On the third round, I was horrified to see the ExtendScript Toolkit pop up with an error message (about as welcome to see an AppleScript script, asking the user to open the Script Editor and fix a script).

  The error message was that app.bringToFront (); was not a valid function.

  This was the case in InDesign, which has a different activation function, and I realized that, even if my AppleScript called Photoshop activate, I was still in InDesign.

  The app.bringToFront JavaScript was so called because I had joined my code in the model of Tranberry.

  So I pressed the button stop on ExtendScript, returned to InDesign and represented the script. This time he worked as usual.

  Occasionally on our network we spend some time beachball - watch as a communication happens in the background. So I guess the time wherever the error was thrown was on one of these downturns in the network.

  The passage of InDesign, Photoshop is not happening pretty fast, but the script has run and has issued an order Photoshop JavaScript while I was still in InDesign.

  In AppleScript this unhappy communication with users can be avoided using blocks '... try error'.

  Is there an equivalent of the error handling in JavaScript that would allow me to avoid being tossed in the ExtendScript Toolkit and give them a friendly message to apologize, explaining what had happened and inviting them to try again?

  JavaScript has try/catch blocks

  try {}

  app.bringToFront ();

  } catch (e) {}

  error handling code

  }

  Or you might be able to use an if statement

  If (app == 'photoshop') {}

  app.bringToFront ();

  } else {}

  app handle not photoshop

  }

• After the installation of 5.71 Lightroom it runs only in the Task Manager

  Hello

  I currently have a problem with Lightroom 5.71/windows 7 / 64-bit. After starting the program it is only being showed in the taskbar and the Task Manager. There is no error indicated by the program.

  I had no problem with the previous version 5.70.

  Thank you in advance.

  How many monitors are connected to your system... and how many monitors is your operating system, think THAT are connected to your system.

  If it shows as active in the Task Manager and the taskbar, it is possible that it is opening on a second monitor assigned. Right-click on an empty area of the desktop, select the screen resolution... how many active monitors show (highlighted in blue)?

• HRSSA Custom WF runs only when the required approval?

  We have problems with a custom function in the learning management. The URL refers to new features and workflows and seems to be correctly formatted (for us). All of our other HRSSA custom workflow triggers correctly when it is called.
  
  If the operation requires approval, the custom workflow is executed.
  
  If the operation does not require the approval, he returned to the seeded Workflow process, even if the URL indicates what he calls our custom features and workflows.
  
  We will copy / modify OTA_LEARNER_HOME_SS and OTA_LEARNER_HOME_PARMS and we have replaced all references to the seeded functions and processes so that they point to those custom in the two parameters and the call of HTML. Our custom workflow is registered under the conditions of the SOUL for Oracle Self Service human resources and personalized features are stored in the custom Global Self Service menu.
  
  OTA_LEARNER_HOME_SS
  
  OA.jsp? OAFunc = XX_OTA_LEARNER_HOME_PARMS & OAHP = XX_OTA_LEARNER_APP_MENU & OASF = XX_OTA_LEARNER_HOME_SS & OAPB = OTA_PRODUCT_BRANDING & pFyiNtfDetails = N
  
  pAMETranType = OTA & pAMEAppId = 810 & pProcessName = XX_LNR_TRNG_APV & pCalledFrom = XX_OTA_LEARNER_HOME_SS & pItemType = HRSSA & pFromMenu = Y & pApprovalMode = YD & pCertProcessName = XX_OTA_CERT_APPRV_JSP_PRC & pCertApprovalMode = YD
  
  OTA_LEARNER_HOME_PARMS
  
  OA.jsp?page=/oracle/apps/ota/learner/webui/LearnerHomePG & pAMETranType = OTA & pAMEAppId = 810 & pProcessName = XX_OTA_LNR_TRNG_APV & pCalledFrom = XX_OTA_LEARNER_HOME_SS & pItemType = HRSSA & pFromMenu = Y & pApprovalMode = YD & OAFunc = XX_OTA_LEARNER_HOME_SS
  
  Looking at the details of workflow in State control, the following settings are missing for one who does not need approval (and ran the seeded workflow):
  
  Transaction ID
  ICX Session ID
  ID function
  
  We are on 12.1.3. We've seen a few similar posts, but nothing to exactly in this direction. Someone else met this kind of behavior?
  
  We have combed by OTN messages, Apps2Fusion, Anil Passi former site, the leading Workflow Solution book (which is very good btw) and google our little hearts.
  
  Thank you very much. Of course, we could use some ideas on this one!
  John
  
  (Inadvertently, we posted this question in another thread, before you know it, it was several years, so we're starting a new).

  The problem is that some function calls to OLM are hard coded.

  Here is the solution that we chose to go with:
  S ' ensure that seeded functions are included with all custom in learning functions current menu functions
  -Replace the call to "OTA_LNR_TRNG_APPROVAL_JSP_PRC" in the inscription seeded in learning and registration in Params learning functions to refer to our custom workflow process

  It is not a supported configuration, because we change something from seeds, but it's the only way we found to call our customized registration process requires no approval.

• Task Scheduler error 2147944309 when I change the task ' Run only when the user connects ' to 'use execute is connected or not' _

  I have a simple task (cmd batch file). Whenever I try to change the settings, I get a dialog box that reads as follows:

  "An error has occurred for task RemoteBk. Error message: the following error is reported: 2147944309 ".

  My computer is on a domain.

  Someone in another forum explained the error:

  0n2147944309 = 0 x 80070775

  Installation: 8007 = Win32 (it's a status code "Win32")

  Status: 0 x 775 = 0n1909

  Q:\>net helpmsg 1909
  The referenced account is currently locked and cannot be logged on to.

  Hope, it may be useful to others.

• Run the second sql statement only if the first sql statement is set to zero.

  Hey guys I seem to have a mental block here. I have two sql statements. I would like to than the second to run only if the first sql statement is set to zero. I know that I can use PLsql but I would really like to see if I can do this with sql upward. Your answers are very much appreciated.
  This is the first sql

    Select     ft.fund_code, 
               ft.orgn_code, 
               ft.acct_code, 
               ft.amount, 
               fb.owner_pidm, 
               ft.prog_code      
        from ftrbremb fb , ftcractg ft
        where fb.doc_code = 'TR000038'
        and fb.ftpbport_id = ft.ftpbport_id

  second sql statement

       Select ft.fund_code, 
               ft.orgn_code, 
               ft.acct_code, 
               ft.amount, 
               fb.owner_pidm, 
               ft.prog_code      
        from ftrbremb fb , ftcractg ft, ftprexps fx
        where fb.doc_code = 'TR000038'
        --and fb.ftpbport_id = ft.ftpbport_id
        and fx.ftrbremb_id = fb.id
        and ft.ftprexps_id = fx.id;

  How can I combine these two statements together so that when the first is null the second run. As a bonus, I want to get just the first line as well.
  Any help would be greatly appreciated. I tried to accomplish with the case statement but it dosent everything seems to work for me.
  Thank you

  Miguel,

  the idea is simple: join the two queries (via the union of all) and to change the second part as to return only the rows if the first query returns no rows by changing the NOT EXISTS (first request). Hope I made it clear... ;)