SD CARD READER DOESN'T WORK?

Similar Questions

• USB not port not working and card reader doesn't work is not on my desk.

  My usb port and built-in card reader does not work on my desk, also my external speakers do not work. stakeholders work with my laptop, it is not connected via USB.

  Hi yankee7,

  · You receive an error code or error message when you connect a USB device?

  · Do you remember recent changes made to your computer before the show?

  · What is the number and the model of the computer?

  · What is the service pack installed on the computer?

  Check the status of the device in Device Manager. Follow the steps below:

  a. click on start

  b. in the run box, type in devmgmt.msc

  c. expand USB bus controllers

  d. check if no yellow bang is listed (double-click on the device with a yellow bang for the error code)

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The right side and express USB card reader does not work

  Hello

  The USB 3.0 right on my rMBP does not work. I have can´t to connect any device to this side. No connection or power.

  Express card reader doesn't work or the other. Finder or disk utility will not show map of mountain.

  I can´t find the card express under system reports reader.

  I ran a test for diagnosis of Apple without any problem.

  I have reset the SMC & LANDAU.

  I reinstalled the operating system without success.

  Anyone who knows how to fix this?

  MacBook Pro with OS X El Capitan 10.11.5, Retina display

  Can someone help me here, please!

  Based on what you have tried and if can't see any device in disk utility, you are dealing with a hardware problem.  Your best option is an appointment at an Apple store for a FREE genius bar.

  Ciao.

• Satellite X 200 and Windows7 (32 bit) - card reader does not work

  Hi all
  I hope someone can help.
  My X 200-219 has been recently upgraded to Windows7 and although it works well (better), the card reader does not work.

  Do I need a driver installed?
  Various looked but can't find anything obvious?

  Bravo and thank you
  DB

  Hello

  Try to install THIS driverplease.

  It is Vista 32 bit driver for digital multimedia card reader. I hope that it will work.

  Send comments.

• Tecra 9000: SD card reader does not work with XP

  I've made some progress on this issue, it seems that Cardbus devices cannot share IRQS, although the main problem is that FFDFB200-FFDFB3FF memory address is shared by the SD card controller and device memory SD card. Unless we find a way to edit the registry to resolve this conflict of memory, the simple answer is that the SD card reader does not work under XP.

  I think that it would take a major surgery of the register or re-writing of drivers to move the address of memory used by the SD card device, I always work on this for now.

  Can someone support Toshiba or Toshiba Marketing explain to me why my Tecra T9100 has a "Designed for Windows XP and Windows 2000" sticker on it, when Toshiba does fully support XP on the 9000 series?

  David

  [Edited by: admin]

  Hi David

  Unfortunately, I n t think that you will find here a Toshiba marketing person or other departments. It is ONLY a user to user forum.

  What you say, it is simply NOT true.

  The Tecra 9000 was delivered with 3 different OS.
  It was delivered with Windows XP Pro, W2k and Win98. You can order all the images of this Toshiba home Toshiba service partner. That's why Tecra 9000 does support Windows XP!
  Tecra 9100 has been bundled with Windows XP and Windows 2000 and also supports Windows XP!

  Of course, there are different models with a different hardware configuration, but all supports Windows XP.

  I put t know why you get this error message or why you cannot use the SD card, but I guess you don t use the image of Toshiba. That's why you installed your operating system isn't properly. Because you are a newbie you don t know the Toshiba all the driver installation must be done in the right order and all Microsoft QFEs must be installed also.

  As you can see you must pay attention to many important things if you want to manually install the operating system.

  Good day

• The M70-267 Satellite internal memory card reader does not work

  Hello

  Internal memory card reader no longer works on my M70-267.
  Device Manager reports the error with the driver of the bus PCI 6 mass storage controller, device 4, function 3.
  The first problem, the result of this is?

  Help, please
  thanx

  Hello

  Yes, this mass storage controller could be the card reader. So, you can try to reinstall the drivers, which can be downloaded here:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  or you can remove it from the Device Manager and restart your machine

  or, if that didn't help then you should send your machine to a service partner chartered for an assessment of health/repair of equipment.

  To find the closest, you can check out this site:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good luck
  See you soon

• SD card reader does not work

  1 hp Pavilion Dv7-7002el

  2. Windows 7 64 bit

  SD card reader does not work

  Thank you

  Welcome to Brunn.

  Try to run this driver.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-102462-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5254140 & sw_lang=.

  Let us know how things will go.

  REO

• Satellite C850-B635 and Win7 - card reader does not work

  My laptop came with windows 8 and the card reader was not working
  but I installed windows 7 64-bit, downloaded all the drivers on my laptop, but the card reader does not work now.

  I downloaded a driver called card reader controller, but it did not work as well
  I don't know if there is a problem or there is a driver should I install and I don't know.
  Please help me solve this problem.

  In my windows Device Manager, these devices is not recognized:
  * PCI simple communication controller
  * SM Bus controller
  * Unknown Device

  I tried searching in my page to download drivers on the Toshiba Web site but could not find these
  Please help me make my card reader works again.
  Concerning

  Post edited by: domaking

  For me, the matter is simple, and the reason why the SD card reader is not working, it's just a driver compatible isn't installed.
  My theory seems to be correct, given that the SM bus controller and PCI simple communication controller appear in Device Manager and I suppose that one of these devices belongs to the player/controller of the SD card.

  I think that you should simply install this Realtek card reader controller that I found on the page of the Toshiba UE driver
  http://Support1.toshiba-tro.de/Tedd-files2/0/CARC-20130924161048.zip

  In addition, you must install all the other drivers Win 7 as well as Toshiba tools available by Satellite C850 series.

  Very important is the chipset driver, USB 3.0 driver (Win 7 has this port driver to control the USB 3.0), display driver. etc.

  Not very essential tools are Bulletin Board, product information online Reeltime, etc. This tools additional don t improved the performance of the laptop so its up to you if you want to use these software components

• Satellite Pro A100 - card reader no longer works

  Hello

  I have a Satellite Pro A100 - PSAACE-008002EN, that I bought a month ago, its worked perfectly so far and has been fantastic to use.

  The main part that I use is the memory located on the front card reader, I have used it with SD, MMC and cards XD for my pda and cameras, until now, it worked well, but recently, I was music transfer etc for my Sony PSP Memory Stick using a Memorystick Pro Duo Pro adapter so that the card fits properly in the slot and it works very well.

  All of a sudden the laptop can no more read on my MS card, I tried the card in a usb card reader and it works perfectly with or without the adapter. The laptop card reader reads cards SD MMC and XD, still perfectly fine but when I framed my memorystick, it shows the stick as being there in my computer, but when I click on the dialog box appears and says that there is no disc?

  I tried to install the latest drivers but it does not work, any help is appreciated

  Thank you very much

  Rich

  I found this information and first of all, I want to put a list of supported cards:

  SD (support of multiple Digital Media Card slot) capacity 8MB - 2GB
  Memory Stick (supported by several Digital Media Card slot) capacity 8 to 256 MB
  photo 16-1 GB xD card
  Memory Stick 8 to 256 MB
  Memory Stick Pro 256 MB to 2 GB
  MultiMediaCard 8 MB - 1 GB

  According to this list, the Memory Stick Pro Duo is not supported. But you used an adapter.
  But maybe this is a reason why the card reader cannot read the MS cards more.

  What you can do is to remove the card from the Device Manager reader, and after new restart try to install this new device

• Satellite M40X: Internal card reader does not work

  My internal card reader does not work. I think that I have not yet installed the driver, or may have other reasons, I don't know. Please show me how to find and install this driver.

  Thank you!

  Can you please check the Device Manager and tell us if any unknown device is listed there?

• Qosmio X 70 - the SD card reader does not work

  I upgraded to 8.1 win a moment the card reader does not work. Nothing happened when I put a card inside. I tried serveral. I changed the driver to a new from the homepage of Realthek - nothing. What can I do?

  Can you please tell us what card reader device status in device (storage controller) management?

  Furthermore, what you have upgraded your machine following the instructions on http://www.toshiba.eu/innovation/generic/windows8_1-message/?

• DV6 7303ef: SD card reader does not work

  Hello, everyone,

  I have problem, SD card reader does not work. Laptop HP dv6 7303ef, windows 7 64 bit envy. When I don't put SD card to laptop card slot computer no response.

  What drivers I shoud install/reinstall or do something else?

  Reagardings,

  Jokubas

  Hello

  Try the driver from the link card reader.

  http://ftp.HP.com/pub/SoftPaq/sp56001-56500/sp56166.exe

  Kind regards

  DP - K

• HPE - 590t: 15-en-1 card reader no longer works

  Hi all

  Today, I noticed that my SD card reader stopped working in my HPE - 590t.  I noticed that Windows 10 assigns generic drivers at the following as shown in Device Manager:

  All other players are working perfectly, only the 15-in-1 card reader does not work, which leads me to believe that the generic drivers that has installed 10 Windows are not compadible with this device.

  My HPE - 590 t initially provided with drivers for 15-in-1 card reader and worked well with Windows 7. Anyone know where I can download third-party drivers 3 for this device? I read that some users who have realtek devices are able to use the realtek drivers.

  My HPE - 590 t has a card mother IPMTB-TK Pegatron Truckee - UL8E.

  Given that the specs on my system does not identify the manufacturer of the card reader - 15 in 1, I am at a loss to know where to go for the drivers for the 15-in-1 card reader.   If anyone has any suggestions, I would be very happy!

  HP DV9310 Windows 7 Professional 4 GB RAM

  DV7t-6100 Windows 7 Pro 8 GB RAM

  Hi all

  I just wanted to point to my own son I found a solution.  15 - in a single card reader had apparently dust causing the drive only reads do not my SD cards.  In which case I solved this situation by spraying a can of air into the slots and now the 15 - in-1 card reader works fine without problems.

• Compaq tc 4200 sd card reader does not work

  Compaq tc 4200 sd card reader does not work, bought with windows 8 is already installed, drank the card reader does not work. I'm not very computer savy so any help is the appretiated!          Thanks Lynn

  Hello:

  It is the only factor that has any chance of working.

  It works on the laptop running Windows 7.  I don't know if it will work on Windows 8.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=1847704&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_70996_1%257CswEnvOID%253D2096%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• My ACER Aspire M5100 9-in-1 card reader does not work. Green light does not illuminate.

  The 9-in-1 card reader no longer works.  The Green led lights when I insert an SD card.  I tried to restart.  Cannot find the driver for the card in the Device Manager.  Does anyone know how to fix this?

  Thanks for all your help.  I solved the problem by turning off the computer, open the computer case and disconnect the cable card 9 in 1 black of the motherboard.  Then I restarted the computer and it re-installed device drivers (message Windows came).  For the first time, card reader devices actually appeared in Device Manager.  Then I turned off the computer, reconnect the cable black and rebooted.  Now everything works fine.