Search for expert advice for voice recording

Similar Questions

• For voice recorder - do I have a fast enough processor?

  I bought a dictaphone sony, he needs minimum system requirements Pentium III 800 CPU more. I have a Pentium Dual Core processor
  T2080 @ 1.73 GHz.  Is my processor fast enough?  How do I know if I'm compatible?

  I bought a dictaphone sony, he needs minimum system requirements Pentium III 800 CPU more. I have a Pentium Dual Core processor
  T2080 @ 1.73 GHz.  Is my processor fast enough?

  Yes. Your CPU is at least 5 times faster than the minimum for a sony dictaphone. And Yes, your voice recorder is compatible with vista.

• My computer (explorer.exe) continues the search for readers/records.

  Hi experts, I need help on my PC.
  After working with my PC for several hours and minutes when I click/Open 'My Computer' it continues the search for my hard drives and folders in libraries, favorite & computer. He just continues to research and does not display my partition/HARD drive. http://i793.Photobucket.com/albums/yy217/aznix2020/Untitled.PNG
  However, its not freezing or hang up and I can always open my drives/folders by using the command run and after a while it will work fine again.
  Is not a serious problem at the moment because it works well after a while but it's a hassle.
  Also im wondering if this is my drive display relationships safely remove HARD in the options in the task bar. Although the option remove appear for less than a month before I encountered this problem.
  My PC is win7 32 bit sp1. Thanks in advance.

  This problem can be caused by a video driver obsolete or damaged, file system on your PC can be damaged or do not correspond with other files and certain applications or services that are running on your computer may be responsible for Windows Explorer to stop working.

  Refer to the following suggestion and check the status of the issue.

  Install the following update and check if that helps

  Windows Explorer may hang in Windows 7 or in Windows Server 2008 R2.

  https://Support2.Microsoft.com/kb/2515325?WA=wsignin1.0

  If the problem persists, see the suggestions mentioned in the following and check the status of the issue

  Error: Windows Explorer has stopped working.

  http://support.Microsoft.com/kb/2694911

  Note: Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Please let us know if you need assistance.

• Search for a record at a later date

  Hello

  From this forum, I am able to solve little of my question but not always able to reach the conclusion.

  My requirement is to search the later date in the clob data type and then return records. Dates are available in the format YYYY DD Mon.

  In the example below, I just want these IDS when the variable 'text' contain later date that is available in the text date > current date

  Output must be ID 101, 102 because it contain date > current date

  ID 103 will not come as long as the date (November 19, 2014) < date current (November 20, 2014)

  with abc as

  (

  Select 101 as id, ' Prime Minister arrived in Melbourne for the last leg of his tour of four cities in Australia on March 1, 2014 and April 3, 2100 as the double data

  Union

  Select 102, "The 234/12 advance r1eading of Singapore December 1, 2012, for the third quarter on December 1, 2015, showing no response" of the double

  Union

  Select 103, ' there is no malaria symptom Minister after November 19, 2014 meaning vaccine properly work ' from dual

  )

  Select regexp_substr (data,'[(0123456789)] + [()] + ((Jan) |)) () Feb) | (Mar) | (APR) | (May). (Jun) | (Jul) | (August). (MS) | (Oct) | (Nov). (Dec)) [()] + [(0123456789)] +')

  ABC

  Suggestion:

  FUNCTION to CREATE or REPLACE makeDate (in_string in VARCHAR2
  in_format IN VARCHAR2: = "DD month YYYY")
  date of return
  IS
  BEGIN
  To_date (in_string, in_format) return;
  exception
  When others then return null;
  end;

  /

  WITH abc AS (SELECT 101 AS ID, 'Prime Minister arrived in Melbourne for the last leg of his tour of four cities in the Australia on March 1, 2014-3 April 2100' AS DATA FROM dual
  UNION
  SELECT 102, "The 234/12 advance r1eading of Singapore December 1, 2012, for the third quarter on December 1, 2015, showing no response" OF THE double
  UNION
  SELECT 103, ' there is no malaria symptom Minister after November 19, 2014 meaning vaccine properly work ' FROM DUAL
  UNION
  SELECT 104, ' there is no malaria symptom Minister after 19 Qur'an 2014 sense vaccine working properly ' FROM DUAL
  )
  , date (select id, regexp_substr (data, "([0-9] {1,2} [A-Z] {3} [0-9] {4})', 1, level, 'i'") datestring)
  ABC
  CONNECT PRIOR ID = ID
  AND PRIOR sys_guid() IS NOT NULL
  AND LEVEL<= regexp_count(data,'([0-9]{1,2}="" [a-z]{3}="">
  SELECT a.ID, a.data
  DATE d
  INNER JOIN abc A ON (A.ID = d.ID)
  where makeDate (d.datestring) > sysdate

  /

  Instead of having a WHEN and others-the function you * should * catch possible exceptions.

  I chose to build a to_date function to be able to continue in the case of a bad date.

  HTH

• Search for a record at least one value

  Hello

  At the bottom of the example I need data that contains at least one event date start of a particular event.

  If the date of start of the event is null for all events for a particular id, then do not appear in the list.

  with acf as

  (

  Select 1001 as the id, "Epilepsy" as illness, 23 January 2015 ' as event_start Union double

  Select 1001, "Epilepsy", "Union double

  Select 1001, "Ascites", 1 December 2011 the Union double

  Select 1002, 'Subileus', "Union double

  Select 1002, 'increased creatinine', "Union double

  Select 1003, "creatinine decreased", 2 October 2012 ' double Union

  Select 1003, "level of creatinine", 2 October 2013 ' double Union

  Select 1004, "alkaline serum '," Union double

  Select 1005, 'Blood sugar', March 4, 2004 "of the double

  )

  Select * from acf

  Output

  ID	DISEASE	EVENT_START
  1001	Ascites	12/01/2011
  1001	Epilepsy	23/01/2015
  1001	Epilepsy
  1003	creatinine decreased	10/02/2012
  1003	creatinine level	10/02/2013
  1005	Blood sugar levels	03/04/2004

  SELECT *.

  Join ACF (select group id of the acf by id having max (event_start) is not null) started using (id)

  Ascites 1001 01/12/2011

  1001 epilepsy 23/01/2015

  1001 epilepsy

  1003 creatinine decreases 10/02/2012

  1003 creatinine level 10/02/2013

  1005 blood sugar level 04/03/2004

  Good bye

  DPT

• search for duplicate records

  Hello
  I need your help.
  I have table with name, count, a flag with dublicate records
  
  example of
  with the name of Adelaide, counties are 3, 4
  with the name of Rigault, charges are 5.5
  with the name of reddy, charges are 1,2,3
  
  I want to update the indicator
  If count is same then update a folder (flag = 'A') and the other should be flag = 'R '.
  If count is different then update the max (flag = 'A') County and the other should be reject left (flag = 'R').
  
  can u help me regarding this issue.
  Use the specifications below
  
  CREATE TABLE TEST_DUB (NAME VARCHAR2 (99), V_COUNT NUMBER, FLAG VARCHAR2 (1));
  
  Insert into TEST_DUB (NAME, V_COUNT)
  Values
  ('SEB', 3);
  Insert into TEST_DUB
  (NAME, V_COUNT)
  Values
  ('SEB', 4);
  Insert into TEST_DUB
  (NAME, V_COUNT)
  Values
  ('PRAKASH', 4);
  Insert into TEST_DUB
  (NAME, V_COUNT)
  Values
  ('PRAKASH', 3);
  Insert into TEST_DUB
  (NAME, V_COUNT)
  Values
  ('RIGAULT', 5);
  Insert into TEST_DUB
  (NAME, V_COUNT)
  Values
  ('RIGAULT', 5);
  Insert into TEST_DUB
  (NAME, V_COUNT)
  Values
  ("REDDY", 1);
  Insert into TEST_DUB
  (NAME, V_COUNT)
  Values
  ("REDDY", 2);
  Insert into TEST_DUB
  (NAME, V_COUNT)
  Values
  ("REDDY", 3);
  Insert into TEST_DUB
  (NAME, V_COUNT)
  Values
  ("YELLA", 2);
  Insert into TEST_DUB
  (NAME, V_COUNT)
  Values
  ("YELLA", 2);
  Insert into TEST_DUB
  (NAME, V_COUNT)
  Values
  ("YELLA", 2);
  Insert into TEST_DUB
  (NAME, V_COUNT)
  Values
  ('KAMAL', 3);
  Insert into TEST_DUB
  (NAME, V_COUNT)
  Values
  ("KAMAL", 2);
  Insert into TEST_DUB
  (NAME, V_COUNT)
  Values
  ("KAMAL", 1);
  COMMIT;
  
  
  Select * from TEST_DUB
  
  Thanks and greetings
  Swayamprakash.Chiluveru
  
  Published by: cocoynacq Swayamprakash on May 19, 2010 22:54

  is it?

   UPDATE test_dub t1
  SET flag =
    (SELECT DECODE(rnum,1,'A','R')
       FROM
      (SELECT rowid,
        v_count    ,
        name       ,
        row_number() over (partition BY name order by v_count DESC) rnum
         FROM test_dub
      ) t2
      WHERE t1.rowid = t2.rowid
    )
  

  Ravi Kumar

• On the voice recorder - I - I need a microphone

  HP 7 more.

  I tried to record a conversation and used the tape recorder.  It seemed to work, but now I can't find my record. Need a microphone to record; and what mic would you suggest that I use for the future?

  "Sound recorder" seems to be more than a demo than a serious recording app application.  I see no way to recover your registration... :-(

  As with many gifts that are provided with the Tablet, there are better versions available in the game store.  Many are still 'free', but funded by advertising.  Some of the apps for free registration may include limits on the length of time, you can save recordings - that is the 'Hi-Q mp3' app will only track for 10 minutes.  If you buy a key for her, the length becomes unlimited.

  I just did a search for "Tape recorder", and 250 hits appeared!   I recommend you to read the notice on any program before downloading.

  Most of the apps will provide a heading 'Aid', but not tape recorder!  Bad form...

  WyreNut

• Advanced is not enabled for sound and voice records

  original title: Panel > sounds and audio devices > audio > audio recording > advanced is not enabled

  Control Panel > sounds and audio devices > audio > audio recording > advanced is not enabled

  Control Panel > sounds and audio devices > voice > voice recorder > advanced is not properly enabled

  Hello

  1. you may be able to hear the sound of windows?

  2. don't you make changes to the computer until the problem occurred?

  I suggest you to try the steps below and check if it helps.

  Method 1: try to scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/310747

  Method 2: as I suggest that you install the updated drivers for the soundcard on the computer by visiting the manufacturer of the sound card and check if it works.

  How to manage devices in Windows XP: http://support.Microsoft.com/kb/283658

  Hope this information is useful.

• Think about making one for the voice recording...

  I've heard great things about the new Sansa Clip +. However, I got a Sansa Express before. It was so horrible, it makes me a little skeptical on the Clip +. One of the most horrible attributes of the Express was the refresh database which came he started, taking over 7 minutes, if it didn't cut itself automatically to every time (I had to click a button to keep it close). But before all the music. For some strange reason, he would play only half of my music. Perhaps the tags have been stripped, very well. But he should be able to play without worrying, because it worked on my computer and other mp3 players.

  Sorry for snapping, but I am in desperate need of an mp3 player. I'm quite the cheap fellow; I also need a digital voice recorder voice that will work in 10-15 (never passed 20) feet. I have an old burner, but it is a consumer of battery. I can not connect to my PC.

  Now, on the mp3 player, it looks like the clip + has firmware similar to that of the Express, but cleaner and better. I saw the review and startup does not seem to be problamatic. However, I leave again I tested the voice recorder on my Express to a 15 ft. He picked up a bit of noise, but I had to max volume out to distinguish what has been recorded (which I couldn't still do).

  I really want the clip to be all around the device, I need, but he would need to work sufficiently to 15feet. I've heard so many comments, but virtually nothing about its features shortly. I really want to do, but Sansa has already failed me once...

  Hello Soy. You don't like how I answered your questions on the ABI plateau? Also, I'm very cheap, but decided to splurge on a Clip + even though I already had a rocket and a Clip. To be quite honest with you, voice recording is the function of quality lowest on the Clip + Clip and Fuze.

  I just tried to save it to my Clip + voice. I just tried two records in the sample. With the player only about 4 feet away, she picked up a lot of noise from a fan in the room. IMO to about 15 feet below the record would probably unintelligible if there is a fan noise or other noises in the room. The speech on the video recorder + works best at short distance from the speaker. Cut out from the rear of the speaker, it can make acceptable recordings.

  It is doubtful that you would get a great record with any player of mp3 of 15-20 feet away. The recorder I've mentioned, Member of the Board can be set to be very directional, but despite this, 15-20 feet away would be a mistake to get a decent record.

• Driver for Sony Voice Recorder ICD-MS515 digital RECORDER

  I can't find the driver for my recorder of the word, and I really need!

  PLEEEEASE help!

  Hello
  
  According to the Sony website, this device is not compatible with windows 7.
  
  For more information visit:
  http://eSupport.Sony.com/us/Perl/SWU-download.pl?upd_id=5529&PASSVAL2=SMB&MDL=ICDMS515
  
  However, you can try to download the drivers from the link below and install it in compatibility mode.
  http://eSupport.Sony.com/us/Perl/SWU-download.pl?upd_id=5529&PASSVAL2=SMB&MDL=ICDMS515
   
  What is program compatibility?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Are there drivers for the recorder sony icd-bp150 for windows 7

  Are there drivers for the recorder sony icd-bp150 for windows 7? I can't recorder to work with the current drivers of dvr3. It works on XP machines but not my computer windows 7...

  Hello sconley3.

  I did some further research and found that, if the worm Software Digital Voice Editor 3.3 is compatible with Windows 7 OS, the recorder itself is not compatible with Windows 7 OS.

  However, you can try to transfer the files from the recorder to a computer with Windows 7 OS installed in it, using the stereo mini plug cable.
  Plug one end of the cable to the headphone jack of the recorder mini stereo jack.
  Plug the other end of the cable to the Microphone Jack on the computer.

  You can follow the link below to transfer files using mini cable plug.
  http://www.KB.Sony.com/selfservice/microsites/search.do?cmd=displayKC&externalID=C1002444

  Kind regards
  ColbyP.

• The search for folders instead of files

  When I do a search on the way to the charms of the right side of the screen, I choose "Files" but records NEVER appear in the search. I can't have shortcuts for everything in my computer. Is it possible for the records displayed. I didn't know if I missed something.

  Otherwise I'll live :)

  I just wanted to ask.

  Thank you

  Heather

  Hello

  Windows key + Q - type to-> libraries - click folder icon.

  Libraries: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows/Libraries-FAQ#1TC=Windows-8

  Libraries - this is Windows 7 and is the same in Windows 8/8.1
  http://Windows.Microsoft.com/en-us/Windows7/products/features/libraries

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Search for Viewer hierarchy ADF

  First of all, I use JDeveloper Studio Edition Version 11.1.1.7.0, JDEVADF_11.1.1.7.0_GENERIC_130226.1400.6493 to build.

  I'm trying to implement a search inside the ADF hierarchy Viewer feature. I have two questions.

  1. I inserted dvt:search inside dvt:hierarchyViewer tag. I got the following error message. Is this a bug?

  This component cannot be a child (direct or indirect) of the component hierarchyViewer

  2. can you search inside the hierarchy viewer be put in place if I don't use ADF BC? My data fuelled the HV are a TreeModel object in a managed bean.

  Any response is appreciated.

  Thank you.

  Thank you so much, Shay.

  The demo is a great help. I read your articles on HV. They are just great!

  My research use case is a little more complicated, at least for me. In the demo, each level in the HV is the same object, employee. In my HV, objects for each level is different. The key of the object on the top level is used to retrieve the info from the top-level object. I wonder if this case is a good target for HV. I did to work well the data display, but for research, I'm not sure. What do you think? I can definitely use expert advice.

  Thank you.

• IOM 11 GR 2 - Configuration of automatic approval for automatic recording - organization field

  Hello

  I am trying to configure automatic approval of record auto in OIM 11 g 2.

  I read a lot of links (a relative majority of 11 GR 1 material) but I'm still not able to do this due to the field of the organization being approver only

  I tried to use an adapter to prepopulate (as I do with success with the 'role' attribute) and a search query. None of this has worked.

  I found out that someone did the same steps as me, but the debate is closed without response: Re: configuration of automatic approval for automatic recording - fail because the organization.

  Any advice to achieve this in GR 2 11?

  Thanks in advance

  This message was edited by: 2808590

  In the case where a person is confronted with the same question, I solved it by using an event handler to pre-process on user create.

  The following link can give some advice: identity and access management: automatic approval for Self-Register users - OIM 11 g R2

  To get dynamically key of the organization by the name of the Organization, you can use it in Manager:

  The value attrRet = new HashSet();

  attrRet.add (OrganizationManagerConstants.AttributeName.ID_FIELD.getId ());

  Organization org = orgManager.getDetails (orgName, attrRet, true);

  Object orgKey = org.getAttribute (OrganizationManagerConstants.AttributeName.ID_FIELD.getId ());

  return (Long) orgKey;

• The search for 'new' emails are NO emails unread.

  Organization of the emails through filters to specific subfolders to be completed successfully. However, if the records are NOT developed, you cannot see the 'new' emails unread. Thus, in order to 'find' where they are quickly, I try a search for 'new' emails. There is NO search condition for 'unread', so I'm looking for "new". Thunderbird apparently does not recognize emails unread as new.

  How to make this work properly? Where can I get 'no read' versus 'new '?

  Best regards

  Ken

  Try this:
  View > folders > unread
  or
  Icon of the menu > folders > unread

  Return to view all folders.
  View > folders > all the
  or
  Icon of the menu > folders > all the