For voice recorder - do I have a fast enough processor?

Similar Questions

• Search for expert advice for voice recording

  I am a beginner and have recorded some your. I have the basics down (find a room with a few surfaces parallel, porous as those foam are better still, quiet room etc.), I think, but I was wondering if someone had links to the most recommended that can make me watch an expert. Thanks in advance.

  The most important is the POLL as an expert.  Getting clear, strong and dynamic records depends on many factors.  Obviously, the environment is important: for voice over, you want a no reverberant without echoes, ambient background or outside noise.  (Things to look at include air conditioners, occupied by side corridors or above the recording room, etc..)

  You will need that a quality microphone suitable for recording voice, probably a good preamp and a quality audio device, quality cables receiving interference from power cords, phone cellular, etc..  You may or may not have a separate mixer, but which will certainly be useful in allowing your voice talent to hear himself talk through headphone monitors.  You will often want to run a separate bus their headphones with a small amount of reverb added to help distinguish what they hear through the headset of their own voice.  You will also need a pop shield between the speaker and the microphone and a microphone adjustable foot.

  Your talent is best to stand, maintaining good posture and a diaphragm open while they speak and will need to keep a constant of the microphone distance.  Give them water or tea, but avoid the liquid tights such as fruit juice or soda.

  Unless you have a mixer that support monitoring, you will not be able to monitor through the software when registering with Soundbooth.  If you are trying to implement a more robust recording environment, I would recommend to take a look at Adobe Audition 3.0.  There is a 30 day trial and you should be able to configure complex configurations with monitoring on-line, real-time effects, and the most advanced compression and cleaning tools.

  Good luck!

• Think about making one for the voice recording...

  I've heard great things about the new Sansa Clip +. However, I got a Sansa Express before. It was so horrible, it makes me a little skeptical on the Clip +. One of the most horrible attributes of the Express was the refresh database which came he started, taking over 7 minutes, if it didn't cut itself automatically to every time (I had to click a button to keep it close). But before all the music. For some strange reason, he would play only half of my music. Perhaps the tags have been stripped, very well. But he should be able to play without worrying, because it worked on my computer and other mp3 players.

  Sorry for snapping, but I am in desperate need of an mp3 player. I'm quite the cheap fellow; I also need a digital voice recorder voice that will work in 10-15 (never passed 20) feet. I have an old burner, but it is a consumer of battery. I can not connect to my PC.

  Now, on the mp3 player, it looks like the clip + has firmware similar to that of the Express, but cleaner and better. I saw the review and startup does not seem to be problamatic. However, I leave again I tested the voice recorder on my Express to a 15 ft. He picked up a bit of noise, but I had to max volume out to distinguish what has been recorded (which I couldn't still do).

  I really want the clip to be all around the device, I need, but he would need to work sufficiently to 15feet. I've heard so many comments, but virtually nothing about its features shortly. I really want to do, but Sansa has already failed me once...

  Hello Soy. You don't like how I answered your questions on the ABI plateau? Also, I'm very cheap, but decided to splurge on a Clip + even though I already had a rocket and a Clip. To be quite honest with you, voice recording is the function of quality lowest on the Clip + Clip and Fuze.

  I just tried to save it to my Clip + voice. I just tried two records in the sample. With the player only about 4 feet away, she picked up a lot of noise from a fan in the room. IMO to about 15 feet below the record would probably unintelligible if there is a fan noise or other noises in the room. The speech on the video recorder + works best at short distance from the speaker. Cut out from the rear of the speaker, it can make acceptable recordings.

  It is doubtful that you would get a great record with any player of mp3 of 15-20 feet away. The recorder I've mentioned, Member of the Board can be set to be very directional, but despite this, 15-20 feet away would be a mistake to get a decent record.

• Advanced is not enabled for sound and voice records

  original title: Panel > sounds and audio devices > audio > audio recording > advanced is not enabled

  Control Panel > sounds and audio devices > audio > audio recording > advanced is not enabled

  Control Panel > sounds and audio devices > voice > voice recorder > advanced is not properly enabled

  Hello

  1. you may be able to hear the sound of windows?

  2. don't you make changes to the computer until the problem occurred?

  I suggest you to try the steps below and check if it helps.

  Method 1: try to scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/310747

  Method 2: as I suggest that you install the updated drivers for the soundcard on the computer by visiting the manufacturer of the sound card and check if it works.

  How to manage devices in Windows XP: http://support.Microsoft.com/kb/283658

  Hope this information is useful.

• YouTube videos problem; whenever I run any video on youtube. It always freeze for a short time and you run. I have to fast forward or rewind the video to run smoothly

  I use windows 7 and inter explorer9. whenever I run any video on youtube. It always freeze for a short time and you run. I have to fast forward or rewind the video to run without problem. could someone help me in this matter. all my programs are up to date.

  Earlier this week Adobe had a version update available / grew Reader,.

  Troubleshooting video, scroll sections Java and Silverlight and use your links version control, uncheck the installation of Java Ask Toolbar addon.

  http://support.Microsoft.com/kb/2532294

  Trouble Shooting games, Shockwave player related.

  http://support.Microsoft.com/kb/2528246

  Uninstall flash if necessary,

  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Download the Flash and Shockwave players and player while your there with ads at the top right of this links page, uncheck the installation of Adobe Chrome addon.

  http://www.Adobe.com/downloads/

• Driver for Sony Voice Recorder ICD-MS515 digital RECORDER

  I can't find the driver for my recorder of the word, and I really need!

  PLEEEEASE help!

  Hello
  
  According to the Sony website, this device is not compatible with windows 7.
  
  For more information visit:
  http://eSupport.Sony.com/us/Perl/SWU-download.pl?upd_id=5529&PASSVAL2=SMB&MDL=ICDMS515
  
  However, you can try to download the drivers from the link below and install it in compatibility mode.
  http://eSupport.Sony.com/us/Perl/SWU-download.pl?upd_id=5529&PASSVAL2=SMB&MDL=ICDMS515
   
  What is program compatibility?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• internal microphone does not work and cannot use a voice recording or Skype or any program that needs a mic

  Original title: his record game

  My internal microphone does not have all said that it is perfect, but I can't use Skype, a voice recording or any program that requires a microphone, so it seems that if my computer doesn´t have a microphone and I should have a digital array microphone. I have a hp pavilion dv7 beats edition

  Hello

  (1) what version of the Windows operating system is installed on your computer?

  (2) do you remember making the last changes made to the computer before this problem?

  You can try the following methods and check if it helps.
  Note: The following troubleshooting methods apply for the Windows 7 operating system.

  Method 1: Run of recording Audio troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-recording-audio-Troubleshooter

  Method 2:

  (a) click the Start button, type "MMSYS.» CPL"(sans les guillemets) in the area start search, and then press ENTER."

  (b) on the read tab, click on the speaker, is currently being used and click the Properties button.

  (c) switch to the tab Advanced ; Uncheck the option "allow applications to take exclusive instrument control."

  (d) if the enhancements tab is available, click it. Check "disable all sound effects'.»»

  (e) in the settings section, select none.

  (f) click apply , and then click OK.

  Method 3: Set the default Microphone
  Exercise the functions mentioned below to adjust the Microphone as default:
  a. go to Start and click on Control Panel .
  b. click on her, then a new window will open.
  (c) in the new window click on the recording tab. Right-click in the window and click Show Disabled devices.
  d. now check if the Microphone is listed there. Right-click on it and choose Activate.
  e. Select Microphone and click "set as default"

  Method 4: Update sound card drivers
  Try to update the latest drivers for your sound card and check if the problem persists.

  Please see this article for more information on the update of drivers. http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work correctly

  For additional help, you can consult the following articles:

  http://Windows.Microsoft.com/en-us/Windows7/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  http://Windows.Microsoft.com/en-us/Windows7/recording-audio-in-sound-recorder-frequently-asked-questions

   

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

   

• Voice recording codec

  I was super surprised when I used the voice recording function and my 2 G clip ran out of recording of the piece (10 hours) before it ran out of battery (15 hours).

  There are so many cuts including coedecs without loss that could be used. MP3 is a uncompressed WAV or one of the many types compressed WAV, PCM is an example. I would say that this would be a very simple and such a no-brainer. I have other players who can save hours 30 or more, but want to use it with its battery life. Its nice on this little thing, but it bothers me a lot, because I bought it partially for this purpose.

  corey_bunker wrote:

  I was super surprised when I used the voice recording function and my 2 G clip ran out of recording of the piece (10 hours) before it ran out of battery (15 hours).

  There are so many cuts including coedecs without loss that could be used. MP3 is a uncompressed WAV or one of the many types compressed WAV, PCM is an example. I would say that this would be a very simple and such a no-brainer. I have other players who can save hours 30 or more, but want to use it with its battery life. Its nice on this little thing, but it bothers me a lot, because I bought it partially for this purpose.

  I also format registered as a feature of some users.   I don't know how much processing power, it should be done on the fly, but I'm sure Sansa engineers/programmers could look to see if another record format could be used.    I wouldn't take the WAV format, but that's no loss.   An additional option for a compressed format would be great.    You could get a clip with more memory, version 4 or 8 GB.   Or a rocket that has a memory slot.

  See you soon,.

• Olympus VN - 480PC Digital Voice Recorder Media Player not working, receive error message: "no driver file found." » »

  Original title: Olympus VN - 480PC Digital Voice Recorder Media Player

  I recently bought a new computer from DELL (Inspiron ONE 2320 with Windows 7) desktop and I connect my Olympus VN-480PC Digital Voice Recorder Media Player with the PC (to download recorded files), but it does not work... "no driver not found file.." After some trial and error I find Olympus webbsite and find appropriate... but then it won't... they have a problem at Olympus and cannot deliver a driver file... I tried 2 or 3 times in the last 6 hours... what to do? Can tell you Ms them the probem? Thanks in advance...

  Hello

  Are you running the 64-bit or 32-bit operating system?

  If you use the 64-bit operating system, you can try to download and install the drivers from this link and check that it works.
  http://www.olympusamerica.com/cpg_section/cpg_support_downloads.asp?ID=1175&OS=w

  If the problem persists, please contact Olympus. As they develop device drivers for their hardware, they can help you with this problem.

  http://www.Olympus-IMS.com/en/support/

• BlackBerry Smartphone Voice Recorder question

  I looked through previous posts and see nothing about it, I hope I didn't miss it.

  My question is: is it possible to continue to record a voice note while the phone is closed. I tried and do not understand whether it is possible or not. I would like to be able to use the BB as an audio recorder / voice and power close the phone and put it in my pocket or desk and he have not yet opened. Is there a way to continue to record, or an app for that?

  Thanks in advance for any help

  Hello jmlentz,

  Welcome to the community of BlackBerry Support Forums

  There is no setting to enable the voice recording with the unit closed at this time.

  See you soon,.

• loops through the sections XML < RecieptDetails > and for each record found...

  My input XML file is...
  I get this XML using file adapter...
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  -< root xmlns:ns2 = "http://www.w3.org/2001/XMLSchema" >
  -< ns2:ReceiptBatch >
  < ns2:FileID > "99999" < / ns2:FileID >
  < ns2:Warehouse > in THE < / ns2:Warehouse >
  'L' < ns2:Revision > < / ns2:Revision >
  < ns2:DocID > A4 < / ns2:DocID >
  -< ns2:Receipt >
  < ns2:DeliveryNo > 123 - OP < / ns2:DeliveryNo >
  < ns2:ProcessDate > 112138 < / ns2:ProcessDate >
  < ns2:ContainerNo > 98765 < / ns2:ContainerNo >
  < ns2:Instructions > TREKAU < / ns2:Instructions >
  < ns2:ReceiptType > 1 < / ns2:ReceiptType >
  < ns2:SuppCustCode > 111 < / ns2:SuppCustCode >
  TREK-Cycle < ns2:SuppCustName > < / ns2:SuppCustName >
  -< ns2:ReceiptDetails >
  < ns2:Line > 1 < / ns2:Line >
  < ns2:ProductCode > 1000 < / ns2:ProductCode >
  < ns2:QuantityAdvised > 1 < / ns2:QuantityAdvised >
  < ns2:QuantityReceived > 1 < / ns2:QuantityReceived >
  < / ns2:ReceiptDetails >
  -< ns2:ReceiptDetails >
  < ns2:Line > 2 < / ns2:Line >
  < ns2:ProductCode > 2000 < / ns2:ProductCode >
  < ns2:QuantityAdvised > 2 < / ns2:QuantityAdvised >
  < ns2:QuantityReceived > 2 < / ns2:QuantityReceived >
  < / ns2:ReceiptDetails >
  -< ns2:ReceiptDetails >
  < ns2:Line > 3 < / ns2:Line >
  < ns2:ProductCode > 2000 < / ns2:ProductCode >
  < ns2:QuantityAdvised > 3 < / ns2:QuantityAdvised >
  < ns2:QuantityReceived > 3 < / ns2:QuantityReceived >
  < / ns2:ReceiptDetails >
  < / ns2:Receipt >
  < / ns2:ReceiptBatch >
  < / root >
  
  There are 2 tables in the database.
  Table 1 = T1743512
  Table 2 = T2743002
  
  table - structure
  
  T1743512-
  
  DOCO KCOO DTCO LNID LNIX LITM NOTICE USR JOBN UPMJ PID'M CKNU UREC
  123 00026 1 1 1000 1 1 123 - OP OP
  124 00026 1 1 1000 1 1 124 - OP OP
  123 00026 2 2 1000 2 2 123 - OP OP
  123 00026 3 3 1000 3 2 123 - OP OP
  
  
  
  Things to do are:--
  
  1. Research Notice T1743512 (table) with the following keys:
  1.T1743512. CKNU = < DeliveryNo > XML
  2.T1743512. LNIX = XML < row >
  II. write a record in the T2743002 table for each < RecieptDetails >. (See map below)
  
  Mapping of the records in the table T2743002 to < ReceiptDetails >
  
  EDU - "SABSSV".
  EDBT - < EDBT > (the same for all records)
  EDTN - < DeliveryNo > (from the section < reception > XML)
  EDLN - < row > (from < ReceiptDetails > section in XML format)
  EDSP - white
  DOCO - white
  DCTO - white
  KCOO - white
  LNID - white
  LITM - < ProductCode > < ReceiptDetails > section
  UORG - < QuantityAdvised > < ReceiptDetails > section
  UREC - < QuantityReceived > < ReceiptDetails > section
  USER - "SABSSV".
  JOBN - "SOA - 3PL".
  PID - 'PO-ENTRANTS ".
  UPMJ - current Date Julian
  - Hour current HHMMSS
  
  
  
  Please suggest the solution.
  
  Published by: Prashant_AP on June 22, 2012 12:24 AM

  Hello

  Solution by using a loop in BPEL;
  1 count the number of nodes for ReceiptDetails.
  2 create a counter for loop through each node ReceiptDetails. Use a while loop in BPEL
  3 search T1743512 (table) with DeliveryNo and the line. Make sure that you select the correct line from the ReceiptDetails node element node. This can be done using the counter example of xpatch ns2:ReceiptBatch / ns2:Receipt / ns2:ReceiptDetails [counter] / ns2:Line. Please use the DB adapter.
  I guess that the DeliveryNo can only appear once in the document following your example.
  4. for each receiptDetails you write a record in table too T2743002. Please use the DB adapter.
  5. Since the time increment the counter. This is to ensure that the while loop stops at the point where the counter is greater then the number of nodes to ReceiptDetails.

  I think a better solution is to make the loop in PL/SQL. It will be faster. You specify an input of type of collection in your pl/sql package parameter. Assign all items receiptDetails and DeliverNo line to the PL/SQL package. Within PL/SQL unravel you the closure. With a little luck, you have the T2743002 in the same schema to create the record too. Otherwise create synonyms of the database or database links.

  Good luck

  Thank you

  Sander

• Voice record and ability to download?

  Hello

  I'm using Flash CS4.

  I will put up a pre-selection process for ASL interpreters where the user will come to a screen with a video player.  It will say "Press the BUTTON TO RECORD YOUR VOICE".  When they do, they must then start a video on the page.  The video will show a person deaf signing in ASL.  That the person watching the video, the person will result in the video speaking and their voice is recording.

  When the video is finished, they will be asked to stop recording and then somehow they will be, and then click a button that download their voice recording.  My client will be able to play the recording on its end to determine whether these they did a good job translating the deaf person in the video.

  I am familiar with the Flash and have used it over the years, but I'm not a big-time programmer with the code, so I hope it will be something I can remove.  If it requires too much coding, if someone could point me to something that is already made and ready to use (i.e., a widget) where I can just incorporate him into my page web I understand that as well.

  Of course, it will be a problem if we want to offer this type of process on mobile devices of control because Android and Apple no longer use Flash.  So I guess it will only be useful for desktop computers and laptops.

  Any way, any help, advice or tips are greatly appreciated.

  Thank you

  The deaf guy

  Just use the MicRecorder class.  That is to say, move the folder org or otherwise add it to your class path.

• Sound of voice, recording in Captiv is always different

  Hi people.

  I have a samson C01U microphone, with a value of $ 200, so im assuming its ok. He said condenser on it, hope that helps a little lol...

  in any case, I have just recorded some session and every little movement in my mouth at an angle on the microphone, the height, proximity, makes a HUGE difference in the speech output.  Sometimes I can here my breathing, other times im very sweet.

  As it is impossible to stay perfectly still while recording when im doing a simulation and move, im wondering how I do about it?

  What is the best thing for recording, a microphone ona stand? that is my current setup...

  Here you can see what im talk... forgive me, its my first good living, although I did some practice those, it was for the iw ork ppl for so its official so to speak lol... http://www.blcstudents.com.au/tutorials/valid.htm

  I'm in a classroom, I have nothing in front of me and I have no other noise coming in, very quiet sound when I record. I have two computer monitors in front of me is everything and my laptop im saving it to.

  Its a laptop nice new Toshiba with good i5 core and 1 GB graphics card, also decent little machine for what im doing...

  Any thoughts would be great.

  MY concerns are:

  I use the bad microphone?

  Can I use a headset instead?

  How do the guys on linda.com this sound reproduction smooth?

  Thank you all, always appreciate your help!

  Yes.  That's the one. But the blue yeti is rumored to be even better because you can set it to receive the sound of two directions at once.  So you can use it as a micro-sets when you record your own voice but also use it as a two-way microphone, which is very useful if the recording of a conversation between two people.  See here: http://www.bluemic.com/yeti/

  The problem is that there is no provider it Jersey in Australia and not many suppliers to the United States is ready to Board here.

  It's the Podcaster Rhode: http://rodemic.com/microphone.php?product=Podcaster

  But I use a boom microphone Rode with my podcaster and loved it so much I bought another to ride the snowball:

  http://rodemic.com/accessory.php?product=PSA1

  The boom makes it much easier to find a good position for the microphone that still lets me see my Notes slide (voiceover script).

• Synchronization of photos for the records of several PC iPAD

  Hello

  I have pictures in several files in my PC.

  I would like to synchronize all at once to my iPAD.

  When I opened "Synchronize the Photos" - page in iTunes, it is possible to select only a single folder.

  Is it possible to select several folders?

  Peter

  If the records are directly under the same parent folder then you should be able to select this parent folder at the top of this screen of Photos and records of the child must be indicated below (if you select "Selected folders") for the selection and timing of the iPad for example

  

  If files are located on your computer, then no, you will not be able to select and synchronize them with your iPad - I created a folder separated (with specific subfolders for holidays/events) for the photos that I have synced my iPad

• Satellite A200-27R integrated microphone for voice over IP

  The description of the product (see excerpt below) for a Satellite A200-27R indicates that the A200-27R has a microphone for voice over IP. I couldn't access it (for example with Skype, Live Messenger, control panel) there's no sign of her external on the computer. Control Panel > Sound > tab says Recording Microphone Realtek High Definition Audio not connected.

  How to configure and use the microphone for voice over IP?

  Features of the Enhanced Numtxpackets® Speedstepa® technology
  SM BIOS compatible
  HD Audio compatibility
  Microsoft® Windows® Hotstarta? ¢ for the entertainment of instant fusion
  Multimedia bar with 6 easy keys (Internet browser, CD/DVD launcher, Play/Pause, Stop, Rewind, forward)
  microphone for voice over IP

  Hello

  The built-in microphone depends on the webcam.
  As far as I know, the Satellite A200-27R PSAE3E was not equipped with an internal webcam and so the internal microphone is not available.

  Try to use an external headset or just simple microphone.

  Concerning