Sections of the table not lining up properly

Similar Questions

• Content in the tables not lining up properly

  This is my first post, so please bear with me.

  I am new to web development and uses Dreamweaver CS5.5 Adobe Master Collection 5.5.

  The page I created is a temporary page until I complete the entire site.  The contents of the table is correctly aligned my three browsers (Chrome, Firefox and IE) when you preview in Dreamweaver.  How ever, once uploaded to the server, when I go on the site using IE, it is not well aligned correctly (but it is in Chrome and Firefox).  To make things worse, it is aligned with other computers, but not all.

  It is not align correctly on my computer, which runs at a resolution of 1600 x 900

  I saw him line up properly with a resolution of 1366 x 768 (not my computer).

  So my main question is which is inconsistent, and I don't know how to solve this problem.  I understand that I can't design a Web site for all the resolutions, but it has only problems with Internet Explorer.

  Is the Web site: http://www.Leapfest.com

  Thank you for your help, and if you need more information please let me know!

  

  Unless you're competent with the code, you should really step away from DW for a few weeks and start with the basics of HTML & CSS. This is necessary to learn to use DW.

  Later, you'll want to spend time to learn JavaScript and probably some server side (PHP & MySql) of programming language.  Take a step at a time.  Rome was not built in a day and won't be your website.

  Bookmark resources below.  You're going to be who often refer.

  HTML, CSS, JavaScript, PHP tutorials - http://w3schools.com/

  Learn CSS positioning in 10 steps

  http://www.Barelyfitz.com/screencast/HTML-training/CSS/positioning/

  How to develop with CSS?

  http://phrogz.NET/CSS/HowToDevelopWithCSS.html

  Code Validation tools

  ------------------------------------

  CSS - http://jigsaw.w3.org/css-validator/

  HTML - http://validator.w3.org/

  Google SEO Starter Guide

  http://googlewebmastercentral.blogspot.com/2010/09/SEO-Starter-Guide-updated.html

  Dreamweaver CSS Templates for beginners

  http://www.Adobe.com/devnet/Dreamweaver/articles/dreamweaver_custom_templates.html

  News Home Pages of DW

  http://www.Adobe.com/devnet/Dreamweaver/articles/introducing_new_css_layouts.html

  Create your first website DW CS5-

  http://www.Adobe.com/devnet/Dreamweaver/articles/first_website_pt1.html

  Nancy O.

  ALT-Web Design & Publishing

  Web | Graphics | Print | Media specialists

  http://ALT-Web.com/

  http://Twitter.com/ALTWEB

• Duplicate sections throughout the table of contents after generating the HTML5 multiscreen output

  Use: RoboHelp 10, version 10.0.0.287

  Steps to reproduce the problem:

  1. click on file > create > main layout (Multiscreen_HTML5)

  2 al ' Generate window click on [Save and Generate]

  3. wait

  4. click on [view results]

  5 results show swathes of the table of contents reproduced in other sections.  10 more times to repeat the generation before that the entire table of contents points are correct and I can publish.  This is not preventing me from doing the job, but it's certainly a time killer.

  Background: I inherited a working version.  I did not create it.  I have more knowledge of the HTML language, but I'm not a developer.  I didn't upgrade beyond RH10 option.  I have studied this many times, but have not been able to find a solution.  The only other thing I've seen sometimes are error messages related to the toctree.js file, but I still don't understand those.  Even when I have not, this past yet, but I have included this error just in case it may be related, although I suspect that it is a separate issue.  I don't currently have the line in the js file because this sample is old and I have not seen the question at least a month.

  Other Notes: I've seen a few posts on a similar question in the printed version, but, I do not have a printed version.  I don't know if that makes a difference, and do I know if anyone in the past that put in place or even where to go to watch.

  

  

  Try to move the project to somewhere that the path is not so long and generate a new folder.

  See www.grainge.org for RoboHelp and Authoring information

  

  @petergrainge

• How to track the changes on the table, not not using triggers

  Hello
  I would like to track DML changes on the tables. As I have several tables, it is not effective to write triggers.
  
  Is there any installation that I can do at the database level.
  
  I use 11g R2.
  
  
  Thank you

  thanks fran,
  
  I am a developer DBA with no access to db as sysdba.
  
  how can I access au$ table
  
  SQL> show parameter audit_trail
  
  NAME TYPE VALUE
  -----------
  audit_trail string DB
  SQL> audit select,insert on ctrl_batch;
  
  Audit succeeded.
  
  SQL> select sqltext from aud$ where sqltext is not null;
  select sqltext from aud$ where sqltext is not null
  *
  ERROR at line 1:
  ORA-00942: table or view does not exist
  

  Hmm... a contradiction in terms...

  (1) audit trail must be in "DB, EXTENDED" see sqltext in the table sys.aud$.

  (2) If you have not logged: $sqlplus / as sysdba, if logged in SQL > conn / as sysdba (and of course sqlplus sys / conn sys as sysdba / as sysdba).

  (3) in your example, you are using views of dictironary of data that require dba (such as system or sys) privileges, but the owner of aud$ is sys. So, probably you use user system, right? Try to connect as sys as I told you in step 2 and try again.

• A new instance of the section of the table

  I have two rows in the table (lines 2 and 3) together to form a section. When I use the following script, LiveCycle creates a new instance of the line 3 instead of creating a new instance of the section (two row 2 and 3). What I am doing wrong? (The section is named ' ActionItem1 in Table1)

  this.resolveNode('Table1._ActionItem1').addInstance (1);

  If (xfa.host.version < 8) {}

  XFA. Form.Recalculate (1);

  }

  You should be able to recreate what you do with subforms, tables is just specialized subforms. Create subforms for your headers, lines, etc. I built a few tables in this way.

• Available to the table not for online stores?

  Is there a way to get BC to not render a table to a category page? As we know all tables is not very useful if you want your site to be admissible.

  I found this post that details how to use javascript to replace the table with any schema that you want (in this case list items):

  http://forums.Adobe.com/message/4238734

  Works great!

• Separating the sections of the table with black lines

  I am trying to add black lines to separate groups of cells in a table. I am using CSS, but know little things about it.
  
  The table is here: form
  
  And that's what I do: form.jpg
  
  Does anyone know how to go about it? I tried to add border-bottom-color in the CSS panel, but it applies the line to the top of the "total" fields
  
  Thanks, Dren.

  On Tuesday, July 8, 2008 12:00:08 + 0000 (UTC), "drennan_uk".
  wrote:

  > in fact, there is a problem. As soon as I insert the line, the table stops calculation. no idea how I can get around this problem? Thank you

  You don't quite have it right--you have this:

  at the top of the file, you have this:

  
  

  He's not going there: remove the

  line 192
  

  replace it with

  --

  ~ Malcolm ~ *...
  ~*

• Is there a self-cleaning of the TABLEs not referenced after surgery impdp?

  Assume the following sequence of operations:
  
  (1.) I export a complete database with expdp in a dumpfile
  2.) I create a new TABLE "mytab" (resp. more generally a object). References/entries in this table will be added to a couple of tables system "all_tables", "dba_tab_privs" and others.
  3.) now I import the previously exported dumpfile to return in the original database with parameter
  TABLE_EXISTS_ACTION = REPLACE FULL = Y
  
  This operation would replace the table "all_tables' (resp. the table behind this point of view system).
  The reference to "mytab" is getting lost. This is similar to an object that is not referenced in C++ (which must be released) or an object not referenced in Java that is removed by the garbage collector.
  
  How such an orphaned table/object is managed in Oracle?
  
  Is there a!-up or a warning?
  
  Peter

  If you create a table after you export and an import complete export the table you created after that export has been carried out, mytable in your example, should not be affected by import. RDBMS database tables are not superimposed my full import rather the DDL created as part of the export updates base tables.

  Where the table exists the create table in dmp file errors out and impdp (or imp) just ignores the error and continues to stage data loading. The stage of loading data capture and does not take into account continuous duplicate key errors to try to insert data until there is no more to this table, then he goes to try to create the index for the table.

  At least that's how exp/imp has worked and I have not noticed any behavior change with expdp/impdp, although I haven't used utilities heavily again.

  HTH - Mark D Powell.

  Note: the above applies when you import in the db of the source, and not another where you expect changes once the dmp file was made to not be present in the default behavior for a full import to do not destroy the existing database and re-create dmp file. To re-create the tablespaces was the default behavior with version 6.

  Edited by: Mark D Powell on March 18, 2010 06:20

• Images in the tables not resizing using reagents HTML5

  With the help of RH11.9.4.291

  I do a few exits Responsive HTML5 test results for Desktop/Tablet/phone by resizing the browser window and I noticed that;

  • Images resizing correct (yay!)
  • Correct resizing tables (also yay!)
  • Images in the tables don't resize at all (boo to that!)

  Any ideas?

  I solved in fact just that, both for reasons of post the solution...

  The culprit was the underlying html language associated with text in italics in the table. On the surface, the text went well. But in the HTML code, it looked like this:

  "font style: =" ' italic;' = ""

  I have no idea how it happened, or why only preventing image resizing, but cleaning, upward, solved the problem.

• Windows are not lining up properly on the screen

  My mother just got an Acer with Windows XP netbook. When I open IE, the window has been cut into the upper part (couldn't see the close button or address bar) and covered the lower part of the screen (so the Start button was not accessible). Is there a solution for this? I could not understand how to fix it.

  Hi MeredithRegal,

  -Other applications work without any problem?

  It might be possible that the button mode full screen was pressed by you accidentally.

  Press F11 on your keyboard to exit full screen and check if that helps.

• The spellings are not lining up properly

  I worked on a project that requires a number of Spelling icons. In August, when I started the illustrations, I was surfing and get out them on startup after another by using this technique to create the flat object (http://design.tutsplus.com/tutorials/how-to-create-advanced-isometric-illustrations-using-the-ssr-m method - vector-1058)

  Never had a problem to align things.

  Today, I started on a new set of icons and went on the creation of a new document and the grid and started building my first object of cube, and it seems now that I can't align plans as exactly as I was before. I have attached a screenshot to show the offset in the corner.

  

  The first image shows the block with 3 sides. A, B and C are presented in Keyline mode to the right details. A and b, the left and aligned center point. C indicates the shift to the right. That's the problem I'm trying to fix.

  I concede that it is quite possible, he always did that and I zoomed never enough to notice the corners do not match, but I don't remember having ever seen this and I've created hundreds of forms using this same method.

  Here are the steps I use:

  1 draw the shape

  2 scale shape vertically to 86.062%

  3 shear (-30 °, 30, 30)

  4. turn the button (- 30 °, - 30, 30)

  I shear before I flip.

  Is - this way it is actually works (and has always worked) or am I missing something in my current approach? I don't see anything to limit any transformation or movement. Any help is appreciated.

  BiggerHead,

  Apart from the above, the vertical scale must be 86.602 (or 86.6025 or 86.60254), not 86.062, which would reduce the inaccuracy of the length of the oblique segments of the sheared form 0,6238-0,0013% (either a (tiny) too short.)

  I think that it is the inaccuracy that you see.

  Using a triangle you won't not one (PLU) inacuracy misremembering and permutation of the numbers.

• Stored procedure, unlike the tables, not in recyclebin, why?

  Hi, I have found that when I drop a stored procedure, it won't go in recyclebin but be permanently deleted.
  Why is this? Why not put recyclebin as table, in case he wants to return?
  
  My version of db is 10 gr 2.
  
  Thank you

  Perhaps because a stored procedure does not have its own physical segment but is stored with other PL/SQL objects in the dictionary table
  and note that this trash is also not enabled for SYS objects.

• Daul monitors not lining up properly in win7

  I tried to put my new left double monitor my primary monitor. I entered the nursery of the display and set up through the new screen immediately to the right of the main screen. However when I hit apply windows thinks it is a good idea to take the 2nd monitor and place as MUCH AS POSSIBLE on the right side of the display manager. That leaves a HUGE gap between my monitors daul which is extremely annoying and makes having a practically useless DM.

  

  Do you have the Apple such as Air Display or Air solutions installed mouse. Basically, you have another monitor 'ghost' installed between 1 and 2. Space is reserved for her but does not appear in the Panel of the screen resolution.

  Moreover the resolution allocated to display BBY is rather unusual, is it correct?

• Data in the table not migrated

  Hi all,

  im getting a problem when migrating mysql to oracle table data.

  IM using sql developer 4.0 for migration.

  here on the 720 tables, I got given in 450 tables only, the rest is blank.

  I found an error in my diary as follows

  Impossible to move data: Streaming result set com.mysql.jdbc.RowDataDynamic@109f37d is still active.

  No statement can be issued when the continuous result sets are open and in use on a given connection.

  Ensure that you called. close() on any active streaming result sets before trying more requests.

  im running on windows 7 32 bit os, oracle 10 g.

  could someone help me.

  How can I ask a question in the forums?

  https://forums.Oracle.com/message/9362002#9362002

• Illustrator rounded my value of pt stroke (literally) not lining up properly.

  I'm doing of .5pt traits. Curiously, they work at an angle, but when I do the vertical or horizontal, they will snap up to 1 pt. Also, when I try to align the focus of three shots, two diagonal (a perfect X), then line up a vertical line perfectly centered on the tops of the Center, slightly offbeat, he jumps, even so much as the smart guide will show that this is not a perfect set. It does the same thing when snap and guides are on or off.

  Is their something I need to change, or just another weakness every day of Illustrator?

  Latest CC, Mac OS X 10.10.4, MBPR 2014 15 "i7 16 GB of ram, 500 GB SSD

  Select the item and disable them line up on the grid of pixels off, in the transform palette.

  Also if you are design to impress your color mode is CMYK not RGB (RGB digital presets turning on snap to grid of pixels)