'Secure the TCS Service Innovations' blocking of the user profile creation

Similar Questions

• "When I tried to sign on the computer, I get the following message: the user profile service service failed connection, failed to load the user profile.

  "Whenever I tried to sign up with my password to connect, do the following: the user profile service service failed connection, failed to load the user profile" when I click OK, it disconnects... Help, please

  Go to Safe Mode and do a system restore. See the link below:

  The user profile Service has not logon. User profile cannot be loaded
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/the-user-profile-service-failed-the-logon-user/995955f8-d9d4-4148-840D-c896c3be78b8

  Follow the links on the post.

• Get the error message "failure to log - on, the user profile user profile Service failed to load.

  Original title: I downloaded 17 Win. 7 pro updates Wednesday, June 15

  Since this update was completed, I was unable to get into my computer; It goes through the usual startup routine, then it goes straight to the 'return - sleep' emblem that I usually just click on (when the computer is back to sleep, not a start-up), and the answer I get is "failure to log - on, cannot load user profile user profile Service. I sure as hell don't want to lose all my data with a fresh 7 - Pro disc. Someone at - it ideas? I swear I'll hold all Microsoft Updates for a few months before installing again. I also had problems with updates of March 2015. Thank you; Croft * address email is removed from the privacy * P.S. I use my old X.P. to connect again.

  Hello

  Thanks for posting your question on the Forums of community of Microsoft.

  According to the description, you receive error message "the user profile service has no log on." User profile could not be found.

  I would be grateful, if you can provide us with the following information to help us better understand the question?

  • Did you the latest changes on your system prior to this problem?

  I suggest you follow the advice given by Jayant Narang replied the August 14,2014 from the link given below and check.

  Reference:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/the-user-profile-service-failed-the-log-on-user/77768431-FAEC-4DA8-b2cb-ddd95fb2e97d

  Hope this information is useful. Please let us know if you need help with Windows.

• The user profile Service has not logon.

  I just added a new HD and a new installation of my HP Win7-64. I had to remove the disc and go back where I was before the update of the material. Finished with a dual boot? Win Vista - Win 7 (recovered) in the script. When I boot Vista (although it looks like Win7 and says on the screen) I get on ok but when I try to choose the Win7 (recovered) I get a failure at the level of the Office of logon "user profile service doesn't have the logon - user profile cannot be loaded.» The user is "Tom." I look at profiles of properties-user-computer and see C:\users\Tom - C:\users\updatus to-C:\users\Admin. I remove the Admin because it was the only one that Windows would allow me to remove. That did not help the problem of logon. I looked in the registry and see user users\Tom & users\updatus it.  Another road, that I took was advanced system settings. -Prof. of the user and I saw 'by default profile - 14/09/09 - Home\Tom - 11/12/12 & Home\Updateus User - 11/12/12. (1) what should I do with this problem of user profile and how do I get the ability to dual boot with Vista or Win7.

  Thank you...

  Tom

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/the-user-profile-service-service-failed-the-logon/2b0e4ade-f635-43b3-86BA-2aca393156b6

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/the-user-profile-service-service-failed-the-logon/dbd48a1b-4858-4781-b9fd-7df38c2db100

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/the-user-profile-service-service-failed-the-logon/13867a67-90f5-4593-a4be-359e8d678eb8

• The user profile Service failed to connect. User profile cannot be loaded.

  The user profile Service failed to connect. User profile cannot be loaded.  Plus all the other user 5 passwords no longer work nor password records or profiles comments or PCL. Under Safe Mode, I am forced to reactivate the Vista operating system before use but cannot mode without failure. How can I get around this block?

  I think you should check for malware. You will not have the particular malware that is mentioned in the following Article, but the Article describes in great detail to try to regain control of the computer. If regain you control, we hope, you can use system restore to go back ahead before the problem arose.

  It would be useful to know what anti-virus software has been installed on the computer, as the ability to restore the system to function properly may be seriously jeopardized if you use Norton and some other software.

  http://www.myantispyware.com/2011/02/21/how-to-remove-Internet-Security-Essentials-virus/

• intermittent connection problem: 'the user profile Service service has no logon. The remote procedure call failed and did not execute. »

  Hello, I'm having intermittent problems with logging in my Windows 7 computer.

  Often after reboot due to applications of Windows Update or any simply restart after the holidays, I have the following message on trying to connect:

  "The service user profile Service has no logon. The remote procedure call failed and did not execute. "

  When I click 'OK', the machine disconnects and try to restart.  This can occur 2 to 5 times before _works_ .  But sometimes it happens at all.  And sometimes he _partially_ connects, but my "reminder" and the "Sidebar Gadgets' not loading not correctly and I get a different RPC error - for example, I lived once a message RPC over Skype cannot work because the remote procedure call failed.

  I'm fairly certain that it is different from the frequently reported issue 'profile of corruption', which was experienced by others.  This problem manifests itself as 'the user profile Service does not log. The user profile could not be loaded "and is reported as a blocking problem consistently reproducible which is set by the 'fixing' of the profile.

  However, the issue I feel is clearly related to an RPC problem is intermittent and not consistent - maybe one of my devices is not reset properly?  Where I can look in the logs of Windows, to provide relevant information on this subject?

  Because my computer was still under warranty, I have raised the issue of Dell and they removed the damaged system file (user account) last week.

  I hope that this will finally fix the problem (previously the error message disappear and reappear after a few weeks later.)  I'll give it a few more weeks to be sure.

• Unable to connect "the user profile Service service has no logon. User profile cannot be loaded. »

  Original title: cannot create the new user account
  I have problems with the creation of user accounts:

  -As administrator, I created a user account again (as an administrator).
  -Appears in the Control Panel, but when I disconnected and tried to log on to the new account, an error message is displayed:
  "The service user profile Service has no logon. User profile cannot be loaded. »
  (I never deleted folder of user manually account.)
  Switched back has original and saw there is no new user account in the users folder.
  -J' rebooted in Safe Mode, and the new account appeared in the user folder. (???)
  -Next time, I can log in with the new account.

  Cause another problem, I deleted the most recent account (I have only created to solve a problem). Since that time one cannot create new accounts (the error message above is displayed always)!

  I came across this problem while I was trying to solve another problem. If an answering machine Microsoft reads this thread, please check my another problem:
  Windows 7 does not refresh the folder views

  You have an idea?

  Ah ha!  Solved my problem (which is, I get a "Login failed" error when you try to connect with a newly created user)!

  My problem was that I suspected that the permissions on the Directory/Users/Default.  It seems that "Everyone" needs at least read access (which I must have somehow removed).  Also, I noticed that this new directory of the user has not created before the opening of the session of this user (even if the user appears in the list of control panel).

  My suggestion for anyone having this problem would be to check the permissions on the directory C:\Users\Default against a working installation.  But for a quick list, on my system:

  Right click on the default directory (it has hidden directory if you must show hidden files/folders), properties, Security tab

  -' Everyone' and 'Users' (modify, read & execute, list the contents of the file, reading)

  -' SYSTEM' and 'Administrators' (control, modify, read & execute, list the contents of the folder, read, write)

  Hope this is of some use to people.

  sShnoop

• New user account will not identify you. Error Msg: "the user profile service has no logon. Already tried the registry option (list of profile edition)

  Hi guys,.

  (I already tried this https://support.microsoft.com/en-us/kb/947215)

  I have usually need two accounts on my system. I lent my laptop to a friend for a few hours and asked him to connect with the guest account but he got "the user profile service has no logon. User profile could not be loaded"error message. So I tried to create new accounts (standard and administrator), but nothing works. I am able to connect to my account but not to other accounts, I have create on my system. Pls help

  OS: Windows 7 Home Premium

  Hello Shashank,

  Thanks for posting your query on the Microsoft Community.

  I imagine the inconvenience that you are experiencing and I appreciate your efforts taken to solve the problem.

  I suggest you refer to the suggestion of Nithyananda J replied on February 15, 2010 and check if that helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Security/Windows-7-Administrator-logon-failed-user-profile/04652778-1646-4bc9-9f5f-1c20273af15b

   

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How to back up and restore the registry in Windows

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you

• Cannot connect to admin account (the user profile Service failed)

  Hi all
  When I try to access my admin account, well I typed my password, BUT this message appears:

  User profile service failed
  User profile cannot be loaded

  I can get my guest very well account, but can not use my admin... anything that can help please!
  Anyone who can help would be great

  This problem may occur if the user profile folder is deleted manually. A profile that is manually deleted does not remove the security identifier (SID) of the list of profiles in the registry. If the SID is present, Windows will try to load the profile by using the ProfileImagePath that points to a nonexistent path. Therefore, the profile cannot be loaded. To resolve this problem, see here: http://support.microsoft.com/kb/947215

• The user profile service has no connection could not load profile __User

  I use Windows 7 ultimate, I can't log on to the computer that shows me that "the user profile service has no connection. Unable to load the user profile.

  So how do I do?

  This error can usually be fixed by following the steps below. All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  1 log on to a different user account with administrative privileges. If you neglected to make an account additional administrative steps 2-3. Otherwise, continue to step 4. See also General information on setting up the accounts of users at the end of this post.

  2 in Mode safe boot. This, by repeatedly pressing the F8 key as the computer starts. That you will get to the menu on the right where you can use your arrow key to select Mode safe [Enter]. The built-in Administrator account is disabled by default in Windows 7. However, if no other administrative accounts exist on the system it can be activated. If this is the case, you will see an icon for the administrator on the homescreen mode without failure. Login to the administrator.

  3 If you don't see the icon for the administrator mode safe account, then the built-in Administrator account is always disabled so you will need to work more. If you have a Windows 7 DVD installation (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [Enter]

  [Note: do not enter the brackets!]

  If you do not have an installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair the system Windows 7 (not a system recovery!) in the menu diagnosis. This menu of diagnosis is the same one where you can choose Safe Mode.  Or you can make a bootable DVD of Windows 7 repair of the file on this link:

  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent asmuTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. If you create the bootable DVD in an older operating system, you need third-party burning like Nero, Roxio or free ImgBurn software to burn the .iso image image file, not in the form of data. Windows 7 can burn the .isos natively.

  Now, remove the rescue DVD you made, restart windows system and log into the built-in Administrator account, you enabled.

  4. try a system restore to when things worked. If you can log in to your user account, you are finished. Otherwise, continue to step 5.

  5. the critical files are under % systemdrive%\users\user-account\ntuser. The ntuser.dat file is actually a registry hive. Run Regedit high and select HKEY_USERS and "load hive" in the menu. Now, go to:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  There is a line for each profile. If a profile is bad, check:

  (a) that the name of the key does not stop in ".bak" (remove .bak If it)
  (b) that the RefCount value is 0 (change it if it is different)
  (c) that the State value is 0 (change if different)

  Make the necessary changes, close Regedit and try to connect as this user.

  6. If that doesn't solve your profile, it is corrupt. When you do that, you should make a new Standard user account and copy your data to it. Do not delete the old account until you have recovered data you need!

  Once everything works, go to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Windows 7

  You absolutely don't want to have only one user account. Like XP, Vista and all the other modern operating systems, Windows 7 is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want account only one user with administrator privileges in Windows 7 because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it can be more work you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).
  MS - MVP - Elephant Boy computers - don't panic!

• Error "the service user profile Service has no logon. User profile cannot be loaded. »

  Original title: I have Windows 7, I can't connect to my admin account (I'm admin) mess. reads: "the user profile Service service has no logon. User profile cannot be loaded. "What to do?  Mike M's to help him.

  As in "title".

  See http://support.microsoft.com/kb/947215/en-gb possibly

  or if still not see joy - http://answers.microsoft.com/en-us/windows/forum/windows_7-security/windows-7-administrator-logon-failed-user-profile/04652778-1646-4bc9-9f5f-1c20273af15b

  I hope that one or you other help.

• Is impossible to turn on the guest account. Cannot create new user account. "The service user profile Service has no logon. User profile cannot be loaded. »

  Is impossible to turn on the guest account.  Cannot create new user account.  After to try one of those and reboot, the icons of account appear, but when you try to use, the following instructions of error present when you try to log in with the new account or comments: "the user profile Service service has no logon.  User profile cannot be loaded. "I looked at the answers to all the previous ones (including the KB947215) and no not to address specifically.  For the most part, they seem to assume that there is a guest or a new profile in the first place...

  The system is Win 7 Pro 64-bit with all available updates.  I can't say when the last time that the guest account has worked (rarely used) and just found out I can't do new additional user, accounts trying to solve the problem of account of comments... so I have not tried to enter Safe Mode and do a system restore , because I can't yet identify a useful restore point...

  There are no entries in the registry for a guest or a new standard user account.  The registry entries for the three accounts normal-quickly (2 x admin, 1 x level) seem to be appropriate.  Watch register computer/HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  S-1-5-18 = system profile

  19 = local service,

  20 = network service,

  21 long numbers + 1004 plus User1 (admin),

  22 long + 1005 plus 2 user (admin),

  23 plus long + 1006 is user3 (standard,

  and no comments or additional profiles appear.

  C:\Users includes

  All users,

  User1,

  User3,

  By default,.

  Default user (which is inaccessible for me, even as an administrator),

  Public,

  User2,

  No guest or additional profile appear.

  All except the default user (I can't open) seem to have the appropriate, NTUser.DAT files although I don't know how to check for corruption.  Having both a default value

  and a default user folder seems hokey.

  I think I understand instructions how to fix or remove a corrupted profile, but that does not apply to the guest account or profiles that do not exist.

  Help?  Ideas?

  This message contains the strange solution.

  [Plan B - I found one thread where one user said that the same symptoms of the problem that you experience this problem solved]

  - - - - - - - - - - -

  Plan h - while another user said that it was caused by a file Windows Live problem

  This is the thread I can not create a new user account (Windows 7): the user profile service service doesn't have the logon

  You find it difficult to follow the thread as it's long and reported problem by different people to confuse it and there is also a bit of bickering [long filaments often end up being quite incomprehensible].

  ..., See references to the event viewer in the middle of page 4 and Windows Live we [at the bottom of page 2 more on page 3].

  I see not the logic of the any of those things, but if one of them do things long enough that you are trying to create new accounts that works, you will know how in the future until a proper solution is found.

  This is the useful part where this user has tested the solutions proposed in this thread linked above: -.

  This has proved to contain leads to a difficulty.  Have to admit, when I read everything the first time, several days, I did indeed find it confusing and even the parts that I "heard" (sorta) does not appear to be related to my symptoms.

  It turns out that the answer of JDMICHAL May 17, 2011 contained this:

  (1) C:\Users\Default\AppData\Local\Microsoft\Windows open live
  (2) this directory has two subdirectories with a single file of each. Go into each directory and apply the following:
  (a) make a right click on the file, open the properties.
  (b) click the Security tab.
  (c) it will issue a message: "to continue, you must be an administrative user with permission to view this object's security properties. Would continue you? ». Click on the button continue.
  (d) click on the Add button...
  (e) ' everyone' type in the box at the bottom of the dialog box. Click on "check names"; It should be emphasized the "everyone". Click OK.
  (f) ensure that the new "Everyone" entry "read" and "read & run" check under the column "allow".

  After doing this for two files, attempt to connect to the account. He must undergo.

  The procedure (bascially) worked... Although the different answers on my system differed slightly along the way (perhaps due to the slightly different versions of Win 7?, because I was already logged in as an administrator?).

  In any case, "Everyone" with the read and read/execute permissions adding to these two files seems to have done the trick:

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\Bici1_00.sqm

  and

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm

  Thank you for leading me to this!

• The user profile Service service is not the user of the sign-in profile cannot be loaded.

  I have a Lenovo W520 ThinkPad with Windows 8 Pro.

  I've seen a lot of posts about this problem and have tried many solutions.

  I made no changes before the problem.

  I only count one (with administrator privileges)

  What I tried (some of them based on other posts with the same problem):

  (1) verified that my login details are just by connecting to the Microsoft.com site from another computer.

  (2) attempt to restore to an earlier date - "system restore failed when copying from the record since the restore point. An unspecified error occurred during system restore. (0 x 80070570)".

  Booted 3) disc of recovery of the operating system, but always connect failed.

  (4) for the startup, consulted system utilities: auto repair of Lenovo does not solve the problem.

  (5) for the startup, did a hard shutdown, repeatedly causing Windows force an automatic system recovery, but that did nothing.

  (6) activated the account administrator to the command prompt. After the reboot, it did not have new logon accounts; just my default account.

  (7) I have tried the option repair (which seems to be less severe than the restoration, but still not desired) but the disk that Windows 8 is on is locked and I did not understand how to defeat that.

  It is not a problem with Windows 8; just log-in.

  I have not tried to change the registry as some recommended positions - that option scares me.

  I have not tried to restore the laptop from the recovery of the operating system disk as it will sweep everything on the hard drive.

  Are there other options?

  Hello

  See the second Option here:

  How to enable or disable high built-in 'Administrator' account Windows 8
  http://www.eightforums.com/tutorials/9650-built-administrator-account-enable-disable-Windows-8-a.html

  =====================

  If you need a startup repair disk:

  Create a system repair disc
  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

  How to create a "system repair disc" (CD/DVD) in Windows 8
  http://www.eightforums.com/tutorials/2855-system-repair-disc-create-Windows-8-a.html

  ===================

  After accessing the built-in Administrator account (see above) or by using the Admin account in
  Safe mode (see below).

  Use manual methods in these NOT the FixIt, who does not work in Windows 8.

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile<- method="" works="" on="" windows="" 7="" and="" windows="">
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  ===============================

  Windows startup settings (including safe mode - is also available from a boot Disc Repair)
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  Other methods - office - sale mouse left - right click - RUN or
  WINDOWS key + X - RUN: type MSCONFIG.exe - Startup tab - check start secure - APPLY / OK
  -REBOOT. Use the general tab - Diagnostic startup or selective startup - APPLY / OK.

  Or Menu charms or WINDOWS key + Q - search Apps - MSCONFIG - see above.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• The user profile Service failed

  I installed a password on my lap top, but tonight, on the attempt to login, I get the message: user profile Service service has no logon
  User profile cannot be loaded.

  How can I connect to?

  Hi mate

  It seems that Microsoft is known on this problem of Windows and have already released a fix for this problem.

  + Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. User profile cannot be loaded.
  http://support.Microsoft.com/kb/947215/en-us

  Please follow the instructions in this MS. knowledge base article
  It seems that you must change the registry

• cannot get past error - could not connect the user profile service

  My HP desktop computer has windows 7 - I can't get past - error message "user profile service failed to connect ' & 'impossible to load the user profile'!"  By clicking on the ICON that displays windows closes and repeats the error message read... a new user account must be defined the user upwards and copy the previous settings account - but I can't get there.

  Hello

  You can try the following.

  Shut down the PC.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the PC.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K