Security key asked using the /SimpleSend of WirelessFTP

Similar Questions

• Drive (USB key) cleaned using the command line. Not able to use the USB.

  I had downloaded Chrome OS vanilla http://chromeos.hexxeh.net/ and writes to a 8 GB USB key. After that I checked, I tried to remove it. I plugged my USB and it asked me to format it. There was only one option of 1 GB. After formatting, I just had 1 GB on my USB key. Then, I tried http://erlern.wordpress.com/2010/04/02/repair-unallocated-space-from-usb-flash-drive/ and followed the procedure in the comments.

  Step 1: Start-> CommandPrompt->
  Step 2: Type diskpart-> Enter
  Step 3: Type list disk-> Enter
  Note: (find the allocated number of the disk)
  Step 4: Type select disk X-> Enter
  Note: (If X is the number of your drive)
  Step 5: Type clean-> Enter

  After that when I plug my camera he asks me to format the drive. It shows unknown capacity. After clicking on start it says Windows could not complete the format. Then when I close it, it says Windows can not format H. check that the drive and the drive are connected correctly, make sure that the disc is not dead, and then try again. For more information, search the help of read-only files and how to change them. Now I can't use it and it has no memory. Please help me.

  I got it. I HAD to PLUG IN ANOTHER PORT USB (IT DOESN'T WORK ON OTHER TWO) AND USE the TOOL in http://erlern.wordpress.com/2010/04/02/repair-unallocated-space-from-usb-flash-drive/ (in the tool, that the device will not be detected in the tool in the other 2 ports) Thank YOU

• Can I buy an activation key and use the Windows 7 Upgrade disk to upgrade to Windows 7?

  CAN I BUY AN ACTIVATION KEY AND USE MY OLD DRIVE TO UPGRADE TO WINDOWS 7 UPGRADE FROM WINDOWS XP?

  Yes, you can:

  http://www.Microsoft.com/Windows/buy/default.aspx

  http://Windows.Microsoft.com/en-us/Windows7/get-a-new-Windows-product-key

  The upgrade to Windows XP?

  Please read these instructions carefully and completely before you begin installing Windows 7: there are important steps that you must follow to upgrade your PC from Windows XP to Windows 7 in order to preserve your files and settings.

  Before you begin, you'll need to backup all your data to an external storage device, and you will need all the installation discs for the programs that you want to keep. Please make sure that you have an external hard drive (see details below).

  More detailed instructions are available at windows.microsoft.com/upgrade-windows-xp. Here are the basic steps.

  1. start Windows Upgrade Advisor (windows.microsoft.com/upgradeadvisor) to see if there are known issues that may affect the installation and the question of whether you should install the version of 32 or 64 bit Windows 7.

  2 back up your files and settings on an external hard drive using Windows Easy Transfer (windows.microsoft.com/windows-easy-transfer). If you do not have an external hard drive, you will not be able to use Windows Easy Transfer. Alternatively, you can copy the files you want to keep on a USB stick, CD or DVD.

  3. you will need to manually reinstall your programs, such as Microsoft Office, after I installed Windows 7. Gather the installation for your programs and all partner/license product key discs. You may be able to download programs from the Internet. For example, Windows Live Messenger can be installed from the download.live.com/messenger.

  4. Insert the Windows 7 DVD in your PC. When asked "which type of installation you want. Click on "Custom (advanced)."

  5. when Windows 7 is installed, use Windows Easy Transfer to restore your files and settings.

  If you are not comfortable Windows 7 installation, check with a local retail or the services of the PC company store to see if they offer upgrade services.

  http://www.notebooks.com/2009/10/13/WinXP-to-Win7/

• Labels security setting CLS using the API?

  Anyone know if it is possible to put a security label to an operating unit on a contact using the API or bulk import?

  For the moment, no. But what you can do is to do an import in bulk with a synchronization action to add to a contact group / shared list.

  This group can be your driver in a program that applies to different labels. The label is applied can be managed by certain values that you push in the contact fields. Once the labels have been applied in the program, then the program can remove them from the group until your next import.

  Best regards

  Bojan

• A security reason to use the 'user account ' instead of the 'administrator' for your personal PC account?

  I need to perform regular tasks in week and maintenance tasks on the weekends, there is no problem if I login as administrator for the week and the weekend.

  If I create 2 accounts: user (weekdays) and Director (weekends), then I run in question switching between the 2 accounts.

  I would like to know what security advantage using user account during the week instead of the administrator account.

  Does anyone have any suggestions?
  Thanks in advance for your suggestions

  I support of many PC, win7 & win8 they all default admin win and a second account with administrator privileges. By default, they all start on the win by default admin account.

  Touch wood I never had no problems, over several years, (some systems are used by children)

  One piece of malware in several years. No installed family safety, children have been educated.

  Some are enterprise systems running 24/7 as they treat the various procedures "out of hours".

• Detect the moment you press menu key BlackBerry using the Midlet and GameCanvas

  Hi all

  I develop only a game and I need to detect when you press the BlackBerry menu button, so I can to pause the game. I don't want add that any new options in the menu, just pause the game when clicked. I found a lot of references using UIApplication and other things. But I use MIDLet and GameCanvas, I use a library of the rim.

  Anyone knows how I can detect when this button is pressed? Because this key is not evoke the keyPressed GameCanvas method.

  How can I do! Is there a library of RIM specific one that I can import and spread something so I can detect this key?

  Kind regards

  Vitor

  Check this thread.

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&thread.ID=23314&view=by_date...

• Positioning original windows 8 pro key after using the Central button of media

  Hello

  I bought the upgrade 39.99 when windows 8 came out then received the key of free and used as Media Center.  I can't locate the original e-mail that the origin of windows 8 pro key, I need to do a new installation and will not accept the product key for Media Center that is incorporated into my current installation.  How can I find this original key of windows 8?  The machine in question has yet to be formatted so that I can use it to extract if possible. Already tried magic jellybean and beautiful Rainbow Advisor, both gave me the key to windows media 8, NOT the original.

  Go to the order summary page, you can find your product key:

  https://www.mswos.com/

  You can download it from there and use your product key to upgrade:

  http://Windows.Microsoft.com/en-GB/Windows-8/upgrade-product-key-only

  If you encounter any quelconque probleme problem with question summary and billing order, please contact a customer support agent to:

  http://support.Microsoft.com/GP/ESD-support-phone-numbers

• You can get key game using the id of product anywhere?

  Im trying to play Halo on my pc but I can't get online without the key in the back of the retail box. I have the disc and the product id, so is it possible to recover the key? Ive already looked in the registry and it isn't here.

  Hi atticus0425,

  We recommend that you contact Microsoft Customer Care for more support options.
  See Contact the Customer Service Microsoft and Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get an error. "reboot and select proper boot device or insert boot media in selected boot device and press a key" while using the hard drive.

  Replace drive hard hgst with seagate and when I replaced the hard drive from hgst orignial he says "reboot and select proper boot device or insert boot media in selected boot device and press a key" and when I tried to install OS it does not display the hard drives to install operating system.please help

  Hello

  Check your cable connections. If necessary check with the manufacturer of the motherboard System Support
  and Seagate Support.

  Make sure that settings/settings (BIOS/CMOS) often F2 that you start the computer is configured to start at
  on the CD/DVD first in the boot order.

  Seagate - Support
  http://www.Seagate.com/support/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Texas use faith E-mail window displays tiny fonts after using the function key can not reverse

  Open E-mail c - faith and tried to highlight several entries by maintaining control. When I did the font on the page became so small it is not readable. How do I reverse this order?

  Zoom on the page can be changed by pressing the Ctrl key while using the mouse wheel to scroll.

  To reset the Zoom of Page - press on and hold the Ctrl key while pressing 0 to reset. Is the zero key number.

• Change the product key to use COA OEM during the product upgrade

  I found the kkid106 question "can I use a product key Windows 7 OEM to a retail facility.

  But as it is not my particular case, I want to be sure and make the issue.

  The question is on a clean install of Windows 7 Home Retail using Windows 7 OEM Home.  My case is not a clean install.

  I have the following two scenarios:

  Scenario 1. A computer with Windows XP Pro OEM who got the original damage.  I have an Image backup which I bring to a Destination with Windows 8 OEM computer.  I get a retail upgrade of Windows 8.  I restore the Image to the destination computer, and then upgrade old XP Pro OEM with retail upgrade to Windows 8.  Technically I find myself with a computer without a license since the upgrade come from an OEM from another computer.  Now, I change the product key by using the Destination COA OEM computer to make a licensed computer.

  This scenario is correct.  Can I validate the license online or by phone?

  Scenario 2. A computer with Windows XP Pro OEM who got the original damage.  I have an Image backup which I bring to a Destination with Windows 8 OEM computer.  I have an Upgrade download Windows 8 without product key.  I restore the Image to the destination computer, and then upgrade old XP Pro OEM upgrade download to Windows 8.  I find myself with a computer without a license, because the upgrade is unlicensed and comes from an OEM from another computer.  Now, I change the product key by using the Destination COA OEM computer to make a licensed computer.

  This scenario is correct.  Can I validate the license online or by phone?

  Hi Jose,

  I would like to send you the items provided, they talk about how use OEM keys with the retail copy.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/can-i-use-Windows-7-OEM-key-with-a-non-OEM-disc/7788dfa2-94a7-4DB3-8bcd-b0e109bd7b95

  http://social.technet.Microsoft.com/forums/Windows/en-us/c805da6b-cbd2-4a40-9ea7-cc17391cf4bf/can-i-use-OEM-Windows-7-HP-product-key-to-install-64bit-OS-off-of-retail-disc?Forum=w7itproinstall

  Thank you

  Waseemulla S

• Can I use the same product key for 32 bit to 64 bit?

  I have a PC which was shipped with Vista Ultimate (32-bit) DVD and that worked for a while fully active, etc. patched.  The PC is a 64-bit processor and I want to exchange for the 64-bit version of Vista for the benefit of the extra memory.

  Can I install Vista 64-bit and activate it using the same (already activated) key that uses the 32-bit version running?

  Yes, the key works for both version. If activation fails, active by phone. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• How to configure vswitch security policy using the API?

  Hello world

  Does anyone know how to set up a vswitch on ESXi Server security policy by using the management API (the idea is to do this in a script)?

  I think specifically the macchange and forgedxmit parameters which are set to true by default, and I want to change false.  Note that I also need a way to control the value from a script.

  I used to do with vmware-vim-cmd hostsvc/net/vswitch_setpolicy-securepolicy-macchange = false vSwitchn and vmware-vim-cmd hostsvc/net/vswitch_setpolicy-securepolicy-forgedxmit = false vSwitchn in the ESX 3.x service console, but I'll try (unsuccessfully so far) to find an equivalent using RCLI or Powershell (I don't want to enable ssh on my ESXi and use vim - cmd as I want to be able to do remote securely.

  Ideally, it would work while the host is in active locking mode (so I only need to authenticate on my server vCenter).

  Advice would be appreciated.

  See you soon,.

  Stéphane

  To update the security policy, you will need to watch the HostNetworkSecurityPolicy : http://www.vmware.com/support/developer/vc-sdk/visdk25pubs/ReferenceGuide/vim.host.NetworkPolicy.SecurityPolicy.html#allowPromiscuous

  You'll want to access the vSwitch you are interested using the following:

  [hostSystem->-> networkSystem configManager - >-> vSwitch networkConfig]

  Once the reference to the vSwitch, you'll want to create HostVirtualSwitchConfig spec: changes to http://www.vmware.com/support/developer/vc-sdk/visdk25pubs/ReferenceGuide/vim.host.VirtualSwitch.Config.html or policies make-> security which will contain (allowPromiscuous, forgedTransmits, macChanges) for changes that are just Boolean parameters.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• How can I find my "network security key?

  Hello world...

  I am a netbook which is preloaded with windows 7 starter. My PC is 64-bit windows vista ultimate. I have an ADSL router that is connected to the computer with a network cable (yellow) - internet works fine.

  I'm trying to connect my netbook to the wireless router, and the netbook from asking a "network security key.

  Where exactly can I find it? I can't find that whatever this is named network security key to my router settings...

  Thank you very much!!

  The wireless security key is in the settings of your router. See below for how to configure a wireless network in complete safety. It will also cover where you will find these settings.

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing.

  Excellent guide for setting up of a wireless network, with images - http://www.microsoft.com/windowsxp/using/networking/setup/wireless.mspx

  MS - MVP - Elephant Boy computers - don't panic!

• What event is captured from using the Central button of the Joystick?

  Hello

  I would like to ask if anyone knows what types of events are triggered when the user uses the button of the central controller or wheel (especially seen with Nexus and HTC phones).

  What is scrolling, click or all?

  Thanks in advance.

  Hello

  KeyboardEvent, is to press the button that it entered returned keyCode, for scrolling arrow returned (Keyboard.UP, Keyboard.DOWN, Keyboard.LEFT Keyboard.RIGHT) key codes, use the suite Manager (button down event):

                 //listen for key input
                 stage.addEventListener(KeyboardEvent.KEY_DOWN, onKeyPressed, false, 0, true);
                 //
  

            protected function onKeyPressed(e:KeyboardEvent):void
            {
                 switch (e.keyCode)
                 {
                      case Keyboard.HOME:
                           //NativeApplication.nativeApplication.exit();// - doesn't work
                           //e.preventDefault();// - doesn't work
                      break;
                      case Keyboard.MENU:
                           e.preventDefault();
                      break;
                      case Keyboard.BACK:
                           //NativeApplication.nativeApplication.exit();
                           e.preventDefault();
                      break;
                      case Keyboard.SEARCH:
                           e.preventDefault();
                      break;
                      case Keyboard.ENTER:
                           e.preventDefault();
                      break;
                      default:
                 }
            }
  

  Best regards