Security on the partitions of the ASO

Similar Questions

• Partitioning of the ASO

  Hello
  We are running essbase version 11.1.1.1.3. My question - you can partition 2 cubes ASO? Which means, can you have 2 cubes ASO, being a source and the other a target? (Sorry for the simplistic example). The partition Wizard does not seem to allow it to
  Thanks as always

  Yes, you can do it if it's transparent/related, have a look at the following table:-http://download.oracle.com/docs/cd/E12825_01/epm.111/esb_dbag/dotprtde.htm#dotprtde_53
  It highlights the types of partitioning combinations that can be used.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• the user's selection by setting the security filter in the ASO to unsort database

  We found a very annoying feature of Essbase: when we make the security filter setting in the ASO database through the console of Regional service, we found that the selection of the user list is not sorted. It is very very difficult to identify the appropriate user name to set the security filter.
  
  All the tips and tricks can improve the process?

  I don't think that this problem is related to ASO - filters are filters.

  All you need to do to sort the column filters is to change the filters, then click on the column heading "name of the filter. It sorts fine in the EE 9.3.1.

  Kind regards

  Cameron Lackpour

• Copying for the ASO cube

  Hello.
  I would like to copy a cube of one application.database to another ASO
  
  The reason is I want to be able to refresh the application data source ASO & metadata, while the ASO target application has security against it and is used by users. Then, ideally, I want just to "publish" the application of the ASO at the application target using a copy of the source file.
  
  So far, I have had limited success. Should I be simply copying the temp, metadata, log, by default and < database name > file, or the file essbaseapp.instance so or .app & .apb files also?
  
  Any help appreciated
  
  Thank you

  In theory, if it's just data and contour changing you should be able to get away with the application, copy of metadata and default folders and the outline.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Optimization of the ASO - BSO

  Hi all
  
  I'm working on the model of the Aso - Bso. All data are stored in Aso and we recover data in excel Add in the BSO. There are 13 dimensions except for the dimension account all are sparse dimension and the dimension account are dynamic calc. I am facing some problems when extracting data for some of the excel reports. I get error message "error in the extractor of contour." I increase the cache data to 1000000 even in the essbase .cfg file I've made a few changes, and I'm able to recover 90% of my data. still not able to receive complete data. Even in the properties of the ASO, I increased the cache on hold. is there another way to fix this or an alternative approach that can help me solve this problem.
  
  What value can I set for the data cache and what modifications can I enter in the essbase .cfg file and how many max I can put forward to cache? or other suggestions
  
  Thanks in advance

  I'm sorry, we tried to give you some tips to help you, but without knowing your applications, hierarchies, dynamic members, partitions, it is difficult to help you more. I suggest that you bring in a person with experience in the present to help you understand it. This will cost you less in the long run. (How long have you lost of tring to understand yourself)

• What happened to security.warn the settings about: config. They are absent in FF25. Help, please!

  Hello

  I'm upgrading from Firefox 15 to 25 of Firefox.
  I used to be able to set the following security warnings in: config.

  Security.warn_entering_secure
  Security.warn_entering_weak
  Security.warn_leaving_secure
  Security.warn_submit_insecure
  Security.warn_viewing_mixed

  No more. Looks like these are missing from Firefox 25.
  Help, please! Urgent.

  Thank you.
  SR.

  warnings about the output of a secure site disappeared completely, you would have to look out for the security at the beginning of the address bar indicator to get that information on a site: https://blog.mozilla.org/ux/2012/06/site-identity-ui-updates/
  
  or use an extension like this for better visibility: https://addons.mozilla.org/firefox/addon/safe/

  the dialog box warning about sending data on a channel not secure to a secure site is still in place.

• I just got a message from Foxfire indicating that my laptop will not be secured through the operating system on my laptop.

  I opened my laptop and a pop-up message appeared when I opened Foxfire indicating something was Foxfire not be able to secure my computer through the operating system running on my Mac.

  Hello jaynpsfl, this is a true information - unfortunately firefox 16 was the latest version of the browser that supports os x 10.5 - there will be no updates for it security in the future.

  Firefox no longer works under Mac OS X 10.5

• I just bought a new computer and re-installed Firefox. Now, when I surf I get no attention (or not) of symbols showing how security is the Web site. Why not?

  On my old computer with Firefox, when I used a search engine and keywords, all sites that displayed had a color code beside him who showed how the security of the Web site was or was not. On my new computer w / Firefox, I get no color symbol showing the security of the site.

  Hello, this is no functionality to firefox integrated but provided by an extension, likely of WOT. You can just add it as addon on your new system again...

• When I go to a secure site the usual security lock is not present at the bottom of the page

  I upgraded my browser Firefox 6.0.1 and now when I enter a secure site the security lock is no longer present at the bottom of the page.

  The status bar is gone and the 'blocking' with her, from Firefox 4.0. Safety information on a web page are shown by the Site identity button.
  
  The former lock could give users a false sense that a site is safe to not to provide information to the site and showed that there is a secure connection that does not guarantee that you are connected to the right server. The Site identity button is introduced in Firefox 3.0 to show more complete information of 'identity' for HTTPS web pages.
  
  https://support.Mozilla.com/en-us/KB/site+identity+button

  You can add a padlock in the address bar with the add-on locks- https://addons.mozilla.org/firefox/addon/padlock-icon

• ProDesk 600 G1 BIOS configuration of the TPM secure through the BIOS Configuration utility

  We have a range of devices, computers HP desktop and laptops in our environment.  Devices are all running Windows 7 64 bit and should have Bitlocker enabled, but we found that some were not encrypted.  So I am trying to set up a remote BIOS and Bitlocker config activate software that we can get out via SCCM and then embed in a task sequence image for new machines.

  I use the Bios HP Configuration utility to check a BIOS password is set and then activate the TPM chip.  I took a BIOS config output of each of our models and created a settings file that has all of the TPM associated parameters of all models.

  At the moment I run Setup BIOS utility manually for testing.  On all models I tried that works very well, except for the 600 ProDesk G1 SFF.

  When I run the utility on the ProDesk 600 G1 MFS, it says that I have managed to update the settings, and when I check the BIOS, the TPM secure has been unhidden and the TPM Management was given to the operating system (two settings I change), but the TPM itself remains hidden.

  It's the release of the BIOS configuration utility (it uses the 2.60.13.1 version, which uses plaintext passwords.  I also tried with the 3.0.13.1 later version that uses password files - same result)

  C:\ > BiosConfigUtility64.exe /cspwd: "password" set: "TPM_Config.REPSET"
  
  < BIOSCONFIG Version = "2.60.13.1" Computername = 'HP600G1' Date = "24/07/2014" Time = "13:01:37 ' UTC '1' = >"
  
  < SETTING changeStatus = "pass" name = "Embedded Security Device" reason = "' returnCode '0' = >"
  
          < OLDVALUE > <! [CDATA [hidden device]] > < / OLDVALUE >
  
          < NEWVALUE > <! [CDATA [device]] > < / NEWVALUE >
  
  < / SETTING >
  
  < SETTING changeStatus = "pass" name = "Enable security on the next boot" reason = "' returnCode '0' = >"
  
          < OLDVALUE > <! [CDATA [disable]] > < / OLDVALUE >
  
          < NEWVALUE > <! [CDATA [enable]] > < / NEWVALUE >
  
  < / SETTING >
  
  < SETTING changeStatus = "pass" name = "The BONES of on-board safety management" reason = "' returnCode '0' = >"
  
          < OLDVALUE > <! [CDATA [disable]] > < / OLDVALUE >
  
          < NEWVALUE > <! [CDATA [enable]] > < / NEWVALUE >
  
  < / SETTING >
  
  < SUCCESS msg = "Successfully set BIOS config." / >
  
  < information msg = 'BCU return the value' real '0' = translated = '0' / >
  
  < / BIOSCONFIG >
  
  C:\ >

  And after a reboot (where it should activate the TPM), BIOS shows as disabled built-in safety device (see attachment for the image).

  I have tried everything I can think of to get this to activate, including:

  • Different versions of the BIOS configuration utility
  
  
  • Remove the password from the BIOS and the application in the same order as the parameters
  
  
  • Different passwords
  
  
  • Reboot and allowing the machine to start completely to Windows before checking if the setting took effect

  I also tried to add the utility and the commands for an SCCM package and it works directly and as part of a sequence of tasks to see if that makes a difference, but nothing I've done has activated the TPM module.

  I know that the TPM module works, as you can turn it on manually and then Bitlocker can be applied to the machine, but with thousands of devices in our environment, I need to get this job without the need for manual intervention.

  Has anyone else had this problem and found a solution?  Or has someone at - he managed to activate the TPM on the SFF of 600 ProDesk G1 using the BIOS Setup utility?  Any ideas / suggestions would be very appreciated!

  P.S. This thread was moved from the company PC - Compaq, Elite, Pro for HP PC Client management. -Hp moderator of the Forum

  This problem has now been resolved by HP.
  
  They provided a replacement motherboard for the test machine I was using that solved this problem. I don't know what kind of motherboard failure could prevent the activation via the script TMP chip but not prevent activation through the BIOS menu, but as a replacement solved the problem, then it must be a hardware failure.

• Toshiba Bulletin Board warns about the security of the poor

  Hi all.

  I noticed that since I have my laptop (L500-1XL) who on a daily basis, a message appears, then disappears, but a sign is left on the security of the members of the Bulletin warning of red section, and if I pass the pointer over it, it says "poor."

  What does that mean?
  What am I supposed to do with this vague information?
  Does anyone else have this problem?

  I installed, updated antivirus updated, running, is recorded by Windows and Windows does not have a problem.
  I have a firewall works well.
  I don't understand! What is poor?

  Hello

  I think that this has nothing to do with the security of the laptop.
  Toshiba bulletin board provides a lot of information;
  Networks/Wlan, PC health, security, PC diagnosis utility Eco monitor
  Maybe the notification means the WiFi signal strength?  :|

  Sorry, but it's really hard to tell what it is without having more details
  However, here is a website of Toshiba Toshiba newsletter:
  http://laptops.Toshiba.com/Research-Center/technology-guides/Toshiba-Bulletin-Board-software

  Here is a Bulletin from Toshiba video:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=52212

• How to change the security of the account after I lost the answers to Security Questions?

  While trying to access iCloud, asked me to answer 2 Questions of security.  I lost the exact answer and repeatedly typed the wrong answers.  How can I change my Security Questions?  Also, I forgot to add an emergency email.

  In this case, you will need to contact the Apple ID account security team

  Contact Apple for assistance with the security of the Apple ID - Apple Support accounts

• Hello, do someone knows if the App Skycure is interesting to use for the security of the iPhone?

  The pp Skycure is interesting to use for the security of the iPhone?

  I doubt it. You need some protection when the computer opened and then install and use a VPN. SaturnVPN is effective and inexpensive.

• Security for the family Microsoft offers a key logger and screenshots of visited Web sites?

  Security for the family Microsoft offers a key logger and screenshots of visited Web sites?

  Original title: family safety

  Moved from the community involvement Center

  No it's not.

• What level of security is the best in the OSI model, which is the application level?

  Hello

  I'm curious to know what level of the model OSI protects best against pirates, which is the application level?

  Thank you

  Johan

  Hello Johan,.

  The OSI networking reference model (ISO 7498 - 1) is designed around seven layers arranged in a stack.

  The OSI security reference model architecture (ISO 7498-2) is also designed around seven layers, reflecting a high level of different requirements in the security of the network.

  In the OSI model, each layer has its own functionality and according to which it has features of different security as shown below.

  Application - authentication

  Presentation - access control

  Session - non-repudiation

  Transport - the integrity of the data

  Network - Privacy

  Data binding - insurance / availability

  Physics - certification / Signature