Security problem for the source code

Similar Questions

• EQG-31209: no attribute security defined for the source of HIS

  I try to configure ITS for OBIEE 11.1.1.7, I followed the oracle document clearly and I configured the oracle document system. so I am facing the below error so please help me for this problem.

  is it necessary to have the web content Center Oracle 11 g?

  (1.) where I can fix the "EQG-31209: no attribute security defined for the source?

  (2.) where I can fix "EQG-30249: crawler process abandoned. '?

  EQG-31209: no attribute security defined for the source (id = 21)

  at oracle.search.crawler.WebCrawler.init(WebCrawler.java:631)

  at ImtCrawler.run (ImtCrawler.java:1954)

  at ImtCrawler.main (ImtCrawler.java:534)

  13:05:47:984 EQG-30249 main ERROR: process of Crawler abandoned.

  Thank you.

  Hi Corinne,.

  I have fixed the problem. It's just a little configuration problem. What is the error code you face?

• SG300 security problem for the Switch

  I think it's a security risk to have a port configured as anything other than access if it's only to be "dumb" connected hosts (printers, workstations, etc.).  So, I usually only assign the VLAN management as the PVID of a trunk port that goes to a server or another switch / virtual machine host and a port configured in the access mode with him VLAN management implemented because its PVID (unidentified), and then a PC can be connected directly to access the web management interface.

  My concern is that no matter what VLAN I assign a port to, both when trunk or access, I can connect a PC and navigate to any IP VLAN (*. 254) and press canvas logical interface of the switch.  What a security risk?  How can I configure the switch so that the only way to access the management interface is via a host that is directly connected to a port that has the management VLAN, as is PVID?

  That sounds about right. But something can be done about it.

  Let's say that there are management VLAN 10. Also, there is a production 5 VLAN - 20, 30, 40, 50, 60. It is a place that allows traffic to pass from one VLAN to the other router.

  Someone of VLAN 50 will be able to access the 10 VLAN (VLAN management).

  By implementing a firewall on the router we can restrict access to certain hosts or networks to VLAN 10. For example, VLAN 20 is admin VLAN (your computer is connected to this VLAN), so we load the firewall to reject all traffic to VLAN 10 unless it comes from VLAN 20.

  At this point, there will be no access to the page web of the switch to anyone else than you.

• Required privilege to view the source code for the stored procedure

  RDBMS Version: 11.2.0.4

  Platform: Oracle Linux 6.4

  In our Production database, we have an application schema named CRM_PROD. And we have a read-only user named steve in this PB.

  Steve must be able to view the source code of all stored procedures, functions and packages in the CRM_PROD schema. But steve shouldn't be able to run these procedures, functions and packages in the CRM_PROD schema. What a privilege should give Steve for this?

  SYS is owner of the dictionary of data and tables for the source code. See configuration of privilege and role authorization - 11 g Release 2 (11.2).

  Select it no matter what dictionary grant will give user (read) access to the full data dictionary.

• Why can't get us the source code Freelancer?

  I understand that this is probably the wrong way to go, but since I don't know any other way, so this seems the best solution currently.

  Freelancer is a 2003 game who appreciated the merits of a hosted Microsoft 'global server' for many years. This support has been removed for more than a year, have been longer. Since then, she has in fact the players, or the community of developers, which has instead created a way not no need for this global server, while keeping the same features in the game.

  Currently there is a community of developers very involved in the game, even with it's player-base down. However, while much can be done as it is, many changes to the game requires things such as to modify the main .exe of the game, goes against the General conditions and so possibly illegal. However, Microsoft has not taken action against such a thing. The only real penalty the Freelancer community met in his history of editing has been a debacle involving a modification on the Halo theme.

  So while Microsoft has essentially removed the bulk of its support for the game, he also did nothing to stop his change, something that many are grateful.

  Ultimately, however, there are many parts of the game that most wish could be changed, but can never be the nature 'hard-coded' of such a thing, where the key to change he is locked up somewhere that we either do not have the knowledge and the ability to get to.

  There has been a lot of requests for the Source Code of Freelancer, but none have materialized. I understand that this is due to a policy that it does not give the source of his games or that the questions should be directed to the developer instead maybe Microsoft. The latter is impossible because the developer was bought by Microsoft, and subsequently dissolved.

  Ultimately the question I would ask is:

  What are the reasons for not releasing the source code of Freelancer, when he happened to so many other games such as Freespace 2?

  Linkus, your name looks familiar discovery gaming community (http://www.discoverygc.com)

  ... I must comment on your closing above statement...:

  "The end is the question I want to ask: .

  What are the reasons for not releasing the source code of Freelancer, when he happened to so many other games such as Freespace 2? »

  This is incorrect, as Freespace 2 has * nothing * to do with Microsoft, it was developed by Volition, Inc. and published by Interplay.

  These companies are not divisions of Microsoft.

  A better final statement would be asked about their release the Source codes of the franchisees Mech Commander, MechWarrior and Mech assault.

  The Battletech Franchise was a substantially larger intellectual property; and yet, they released their grip on it.

  (Although FASA / Weisman have reformed as Smith and Tinker, teaming with Piranha to do a full restart of the MechWarrior series, apparently the first deadline this year.)

  Who would actually have weight in an argument as to why they won't leave a much smaller intellectual property to the modding community.

• Link to the source code for the module does not

  I followed this link: https://addons.mozilla.org/en-US/firefox/addon/sabnzbdfox/?src=search (with download of the source) and got a '404 error' (https://addons.mozilla.org/en-US/firefox/files/browse/76042/)

  Find the source code in another place, and when I do, how I update the broken link?

  Hello

  You can also try after some time. To search for possible temporary network problems please see: http://status.mozilla.com/

  Also, if the problem persists, try the link in a new profile.

  Profiles Howto

• Where can I see the source code for the controller

  Hi all
  
  My question is maybe stupid to some gurus of the ADF, but many people have found that R12 Pages have a lot of code and there is not too much documentation on how to customize a controller.
  
  1. I see the *.class of my controller in the $JAVA_TOP/oracle/apps/ar/cusstd/createcus/webui/ArCreCusCO.class on my server, BUT I don't see that any of the encrypted code when I open up JDeveloper. So I guess I'm doing it wrong.
  
  2. I want to change ArCreCusCO.class. I see a lot of people say Hey I've customized XYZ controller, but how they found the code and continue to change it is the least of my headaches
  
  3. do I need to configure something in JDeveloper so I can see Server classes to my JDeveloper - what they do, if so, how you do?
  
  4. I saw something in the help page saying adding components to the Extension of the OA the devil what?
  
  Thanks to illuminate some beginners in the ADF.
  
  With the new philosophy of Java, some of those 12 developers experience that we are not starting from zero because of this new architecture.
  
  Hector. -.
  
  p.s. any entry will be taken, but do not refer to the Oracle tutorial, is an example of cake I need some practical examples ;-)

  Hi hbono99

  (1.) you can .class c above java, which is the compiled code as source code is not provided by oracle, if you need this file '.class' to see the source code for decompile, JAD decompiler 1.5.8 version will be newer .well, it would be useful to see the source code, but sometimes decompiled class create problems when trying to compile again.

  2.), you can make changes in the ArCreCusCO.class after that decompilation and compile the same thing again to generate the class file, bcz you can put only class file on the server, BUT that would be fatal to change the standard class and the concept here to come of the Extension in the image, you need to extend this class. «XYZ custom "means the extesión of the class parent and make the extension u don't need not the source.»

  3.) u cannot see the source code of a .class in Jdeveloper, there is no such a parameter.

  (4.) to extend the need to ArCreCusCO.class you to create a workspace followed by creating a project in the workspace Jdeveloper
  process to extend the class

  a.) create workspace and project
  (b) create the same package in which resides the ArCreCusCO.class under the \jdev\myprojects\ in your Jdeveloper
  (c.) right click on the project, go to create the new class, here you will find the option to metion the package where you want to put the superior (normal package starts with a xx.oracle.-) the possibility of mentioning the nmae classs that you want to extend
  (d.) click ok at the end, you will get your extended class

  e.) source code usually has two methods ProcessFormRequest and processRequest, you can add the code according to the requirement.

  extension works bcz inside the method she calls super, so all first it runs all the methods of the parent class in your case ArCreCusCO.class and then control comes in extended class, now, your code will be run, which will be accomliseh your condition

  f.) tranaser the class file file expanded to the server, add this extended class with seeded page you need to customize the page, you will find the option to add your class, mention u your class with package to compete (the way that we import the file with their package names in our source code, here import is not necessary)

  thanx

  Pratap

• Search the source code for directories

  I'm developing a tool which is a directory of search optimizer. I was wondering where the source code of search directories? I want my face to look like window optimizer directory ongoing research, but then im adding features down. Thank you!

  Well Hello Meow,

  According to me, that the source for this Panel is part of one of the DLL Teststand calls directly, not in a file located in the directory of Teststand sequence.  Therefore, it will be not accessible to the public.

• Where can I download the source code of the kernel for Iconia A1-830?

  Global - download.acer.com I can only find the source code of the kernel for A1 - 810 and 811 - A1, but for A1-830 the source code isn't there.

  We do not display the kernel for all products sources, however, I sent a message to our product group to see if we have the source files, we can publish. I recommend that you check in 5 to 7 days to see if we are able to view the files.

• Need to use the source code in VB6 for a Recordset multiple connection

  Hello
  I need different types of connection in a Recordset. How to use the source code in vb6. kindly help me.

  Thank you...

  Hi Alexander,.

  The question you have posted is better suited in the MSDN Forums. Please see the following link for more information.

  Category VB

• connection via bluetooth to the laptop problems for laptop.error code 0 x 80070057

  connection via bluetooth to the laptop problems for laptop.error code 0 x 80070057

  Best regards: John

  Hello

  -Do you have Bluetooth devices internal or external connected to the laptop?
  -Have you checked if all the Bluetooth drivers on two laptops are very well installed?
  -This work was fine before? If so, what are the hardware/software changes made on the computer before this problem started?
  -Is a problem only when these 2 laptops connecting or is that when you try to connect these 2 laptops at any other laptop too?

  I suggest you to go through these below items that could help you to fix this problem.

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices
  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this information helps you!

• Can we get the source code for the camera?

  Can we get the source code for the camera? Including libraries? CM is great, except that the camera is not well polished, and the quality of the stock ROM Sony are much better.

  probably more likely questions and restrictions of copyright

  inspect the developers space

  http://developer.sonymobile.com/

• Problems installing drivers for printer EPSON L110. Error message "Windows could not determine the language to use for the installation: CODE of ERROR: 0x80004005.»

  Original title: trouble installing the drivers for my printer.

  Hello

  I am trying to install an EPSON L110 and eveytime I try to run the CD, it appears this error message.

  Windows could not determine the language to use for the installation: CODE of ERROR: 0x80004005.

  I have windows 7 32 bit OS. What I'm doing. A quick response will be very useful.

  TKS

  Gerard

  Hi, Germain,.

  This problem could occur due to corrupted files. We will try to download and install the latest printer driver on the site of the manufacturer of the printer. Check if it helps.

  http://www.Epson.co.in/epson_india/ink_tank_system_printers/product.page?product_name=Epson_L110&tab_index=4

  See the articles for more information.

  Install a printer

  Find and install printer drivers in Windows 7

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Where is the source code for the samples of 8 JavaFX?

  Hello
  
  I just downloaded the samples for JavaFX 8 and the popup menu in the upper left really caught my attention.
  
  I want to study the source code for it. Anyone know where I can find it?
  
  I expected it here http://hg.openjdk.java.net/openjfx/8/master/rt/file but it seems it isn't here.
  
  Alternative: Jasper Potts presented a kiosk application to Devoxx 2012 (Antwerp), which was also used at JavaOne. I think that this application uses the same Menu. And he says that sources are available. But I do not remember the link.

  https://jdk8.Java.NET/Download.html

• where can I get the source code for the shell of the user interface

  Hi all
  I use Jdeveloper 11.1.2.3.0 shell and UI.
  I want to show a custom message to the user when it tries to close a tab that contains unsaved data.
  I found this thread {message identifier: = 10782288}
  I tried to extract the contents of the oracle-page-templates file - ext.jar, but I find only the .class files not .java files.
  So, where can I get the source code for the shell of the user interface, or someone has a better solution?

  Hello

  Try this link http://www.oracle.com/technetwork/developer-tools/adf/uishellsrc-1612278.zip

  Frank