See the wizard bug of mapping object 'custom SQL query' attribute to JDeveloper 12.1.3.0.0

Similar Questions

• How do I see the IP Source address of a customer using ACE One-armed-mode of loading balance HTTP proxy request

  I use a device of 4710 Ace deployed in armed mode, use Source TAR to balancing HTTP request to a couple of Proxy servers.

  Everything works well, but the thing is that I do not see the client IP addresses on the Proxy logs, so I can't keep track of them.

  Interfaces and the Nat configs are:

  interface vlan 200

  Description of server-side-VLAN

  Bridge-Group 5

  NAT-pool 5 10.1.1.5 10.1.1.5 netmask 255.255.255.0 pat

  entered service VIP policy

  interface vlan 300

  Client-Side-VLAN description

  Bridge-Group 5

  interface bvi 5

  IP 10.1.1.3 255.255.248.0

  Interface Client-Server virtual description

  IP route 0.0.0.0 0.0.0.0 10.1.1.1

  and the policy looks like this

  Policy-map multi-game VIP

  class port 80

  Balancing vip continues

  policy of balancing port 80

  NAT Dynamics 5 vlan 200

  The resource assignment:

  Sticky ip-netmask 255.255.255.255 address two CLASSES of RESOURCES

  Timeout 5

  Serverfarm Service80

  Any suggestions will be appreciated,

  Thank you

  Hello

  You can use X-forwarded-for to insert the IP address of the client in the header Http. take a look at the link below:

  http://www.Cisco.com/en/us/products/HW/modules/ps2706/products_configura...

  Let me know if you have any questions.

  Kind regards
  Kanwal

  Sent by Cisco Support technique iPhone App

• The SYS application error. Object in SQL Developer

  When I run the query [select * from object;] in sql developer with sys as sysdba in oracle 10g, it gives me an error
  
  ORA-04045: errors during recompilation/revalidation of SYS. OBJECT
  ORA-06553: PLS-213: STANDARD package is not accessible
  04045 00000 - 'errors during recompilation/revalidation of s.%s'
  * Cause: This message indicates the object to which the following
  errors apply. Errors occurred during implicit
  recompilation/revalidation of the object.
  * Action: Check the following errors for more information, and
  make the necessary corrections to the object.
  
  SQL > SELECT * from dba_objects where owner = 'SYS' and object_name = "object";
  
  OWNER
  ------------------------------
  OBJECT_NAME
  --------------------------------------------------------------------------------
  SUBOBJECT_NAME OBJECT_ID DATA_OBJECT_ID, OBJECT_TYPE
  ------------------------------ ---------- -------------- -------------------
  CREATED LAST_DDL_ TIMESTAMP STATUS T G S
  --------- --------- ------------------- ------- - - -
  SYS
  OBJECT
  VIEW OF 2369
  22 OCTOBER 05 9 OCTOBER 11 2005-10 - 22:21:45:28 VALID N N N
  
  
  SQL > select object_name, object_type, status, owner of dba_objects where object_name = 'STANDARD ';
  
  OWNER
  ------------------------------
  OBJECT_NAME
  --------------------------------------------------------------------------------
  OBJECT_TYPE STATUS
  ------------------- -------
  SYS
  STANDARD
  PACKAGE VALID
  
  SYS
  STANDARD
  VALID PACKAGE BODY
  
  The ones I found are valid. How to fix the object?
  
  Any help? Thank you.

  You must check the packaging STANDARD is valid and owned by SYS. Do the
  Next:

  (1) check the status of the STANDARD package using:

  connect sys /.
  SQL > SELECT * FROM DBA_OBJECTS WHERE OWNER = 'SYS '.
  AND OBJECT_NAME = 'STANDARD ';

  If you find the status is "DISABLED" then:

  SQL > ALTER THE STANDARD PACKAGE COMPILATION;

  You will find also a number of other packages 'is not valid.
  State. They must ALL be (re) compiled.

  If you find the STANDARD does not exist then:

  Check "$ORACLE_HOME/rdbms/admin/standard.sql" exists.

  If this file does not exist then:

  You probably have not installed PL/SQL.
  You must use the Setup program to install PL/SQL.

  If the file does not exist then:

  Make sure your ORACLE_SID is set correctly:

  SQL > connect sys /.
  SQL > @$ORACLE_HOME/rdbms/admin/catproc.sql

  (2) check that the STANDARD is owned by SYS:

  SQL > SELECT * FROM DBA_OBJECTS WHERE OBJECT_NAME = 'STANDARD ';

  If OWNER! = SYS then catproc.sql has not been executed correctly
  by SYS. You will have to drop these packets and re-run catproc
  as SYS.

  (3) try to run 'catalog.sql' and 'catproc.sql' at the opening of a spool file
  to intercept errors that may have occurred.

  Look for errors such as:

  ORA-00604: an error has occurred at the SQL level 1 recursive
  ORA-04031: unable to allocate 2 192 bytes of memory ("pool shared, shared

  (', ' PROCEDURE$ ', 'KQLS bunch', 'BLOCK the MEM KQLS')

  Create or Replace:
  *
  ORA-06553: PLS-213: STANDARD package is not accessible
  Grant execute on STANDARD to the public

  ORA-04042: procedure, function, package, or package body does not exist

  In this case, you need to increase the 'SHARED_POOL_SIZE' in the
  "init .ora.

  Then run back CATALOGUE and CATPROC.

  Increase "SHARED_POOL_SIZE" will allocate more resources and
  allow scripts to run successfully.

  Explanation:
  ============

  The PL/SQL compiler could not find the STANDARD package in the current
  Oracle database. To compile a program, PL/SQL needs package STANDARD.

  I think that; This is useful to solve your problem.

• How do I get the data of "Regulatory BOM" Formulation with SQL query output

  Hello

  We would like to implement a State of BiPublisher that displays "Regulation BOM" (wording-> click on TAB Formulation on exit Popup-> TAB Composition) information table.

  How could get us this information with an SQL query?

  Thank you

  Annarosa

  Hi, given 'Regulatory BOM' output of the Formulation are more complicated than expected. Attached is an example. You can test and make the appropriate changes to your report.

• I downloaded 2 cards of my cameras in the same folder in LR 4 but cannot see the photos to a map

  The subject says it all.

  When Lightroom has completed the import process, is to show that images of this previous import. In the library module, colonne column left, open the 'Files' section and select the folder you imported to. Then you should see all of the images that were imported.

• Map deployed but do not see the database package

  Hello
  
  I have been a card having a flat file as a source and a target table.
  But I do not see the database package. Which object this kind of card would be in the database?
  
  Thank you
  Sozy

  Hello

  When you move the data from the flat file to oracle table, OWB will create the type mapping SQL LOADER in which it will generate the .ctl file and submit the same to Oracle SQLLDR, which in turn make the load.
  It doesn't generate PL/SQL package.

  Thank you
  Fati

• InDesign window Palette Too Short - can not see the options on the right

  Hello

  I have presented a Wishform of Adobe, but wonder if someone has solved this problem/bug. All of my InDesign CC 2015 palettes are too short and I don't see the options on the right side (for example. Layers palette: can't see the squares move a selected object from one layer to another. Palette of background tasks: can't see the 'x' which would cancel a background.) Have you tried to drag the pallets to the width of the full screen nothing works. Any help would be amazing.

  Thank you!

  This is how it should look like (screenshot of others): note the boxes on the right:

  

  This is what mine looks like when expanded to full screen. Still no boxes T_T

  

  

  Trash your preferences.

• Dynamic SQL query in the DB adapter

  Hello
  I want to use the following custom SQL query in the DB adapter:
  
  SELECT EMP_ID, EMP_NAME, EMP_LOCATION FROM EMP WHERE EMP_ID IN (#iNPUT_PARAMETER)
  
  the problem I'm facing is that I don't know at the time of the development that EMP_ID how much will be passed to the process so that I can not use the input parameter specific number. I cannot use it IN the query within which statement I concatenate all the EMP_ID separated by comma and passed under INPUT_PARAMETER, but when running, he read the full concatenated string as a single string rather than identify them as a list of different: with comma separation. could someone help me in this case
  
  Thank you
  Sunil

  Use the following query with two parameters. Build the string with delimiter when running and pass this string and delimiter to query... (in this example, the input value would be the same for both Delimiter1 and Delimiter2.)

  Select * from EMP WHERE deptno IN (SELECT SUBSTR (STRING_TO_TOKENIZE, DECODE (LEVEL, 1, 1, INSTR (STRING_TO_TOKENIZE, SEPARATOR, 1, LEVEL-1) + 1), INSTR (STRING_TO_TOKENIZE, SEPARATOR, 1, LEVEL)-DECODE (LEVEL, 1, 1, INSTR (STRING_TO_TOKENIZE, SEPARATOR, 1, LEVEL-1) + 1)) FROM (SELECT #StringToTokenizer | #Delimiter1 AS STRING_TO_TOKENIZE, #Delimiter2 AS DELIMITER FROM DUAL) CONNECT BY INSTR (STRING_TO_TOKENIZE SEPARATOR) ((, 1, LEVEL) > 0)

  Thank you
  -Sreeny

• Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical de

  Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »

  Perhaps the reason for the problem of synchronization is the problem with the loading of google map?

  Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »

  Apple has not renewed the contract with Google to access Google servers.

  If the old version of iPhoto, which are still using Google's servers for the cards and places are either crashing or hanging.  Places are only work in iPhoto 9.5.1 or newer, who use places of Apple servers.

  There is more support for iPhoto from Apple.  You must update iPhoto 9.5.1 with the Mavericks. It would work well, only it is no longer buying this update to Apple.

  Perhaps the reason for the problem of synchronization is the problem with the loading of google map?

  It is very likely.  If iPhoto work very well when you are offline, then your problems will be caused by the connection failed to Googles servers.

  See this: Bug: iPhoto 9.4 crashing when viewing the scene

• Can not see the list of objects of the OSM

  When I open the style of the object manager, I see the Standard objects and Quizzing options listed in the box on the left and a list of styles in the box to the right of this.  I can't indicator is entered to see the detailed list of objects.

  I am using Captivate as part of the eLearning Suite 5.5 2.5 on a Windows 7 computer.  I don't have administrator rights on this computer.  However, I have the same problem with verson even on a XP machine where I have administrator rights and also using Captivate 6 test on the first machine.

  

  Please report it via the Bug link.

  You must click ON the triangles!

  See you soon... Rick

• Not able to see the fields within a custom resources optimization

  Hi all

  I am not able to see the fields within a custom value.

  Here is my code for the custom resource optimization:

  public class CustomContentContainer extends VerticalFieldManager{
  
      String content_header;
      int container_height;
      int displayWidth = Display.getWidth();
      int displayHeight = Display.getHeight();
  
      public CustomContentContainer(String content_header,int height){
          super(Manager.NO_VERTICAL_SCROLL | Manager.NO_HORIZONTAL_SCROLL);
          this.content_header = content_header;
          container_height = displayHeight-height;
      }
  
      protected void sublayout(int maxWidth, int maxHeight) {
          super.sublayout(maxWidth, container_height);
          setExtent(maxWidth,container_height);
      };
  
      protected void paint(Graphics graphics)
      {
          int X_POS = 20;
          int Y_POS = 20;
  
          int width = displayWidth;
          int height=container_height;
          int[] xPts = {0, width, width, 0};
          int[] yPts = {0, 0, height, height};
          int[] colors = { 0xffffff, 0xf7f7f6, 0xd4d0cc, 0xb0a9a2 };
          graphics.drawShadedFilledPath(xPts, yPts, null, colors, null);
  
          graphics.setColor(0xc0c0c0);
          graphics.drawRoundRect(X_POS, Y_POS, getWidth()-40, container_height-40, 10,10);
  
          int stringWidth = getFont().getAdvance(content_header);
          graphics.setColor(0xF8F8F8);
  
          graphics.fillRect(35, 5, stringWidth+10, 30);
  
          graphics.setColor(0xFF0000);
          graphics.drawText(content_header, 40, 5);
      };
  
  }
  

  Here is the Code inside the class from the main screen

  settingsContainer = new CustomContentContainer("Settings",vodavaultLogo.getHeight());
          contentContainer = new VerticalFieldManager(Manager.VERTICAL_SCROLL|USE_ALL_WIDTH);
  
          passwd1 = new CustomEditField();
          passwd2 = new CustomEditField();
          contentContainer.add(passwd1);
          contentContainer.add(passwd2);
          contentContainer.setMargin(35,35,35,35);
  
          mainContainer.add(vodavaultLogoField);
          settingsContainer.add(contentContainer);
          mainContainer.add(settingsContainer);
          add(mainContainer);
  

  You must call the super.paint (.) in your paint (...) optimization of resources, if you paint all areas which are added.

• Where can I reallocate the letter of a mapped network drive? In addition, where to see a list of the letters in use by mapped network drives?

  Change the mapped network drive letter

  Letter h: is not available to map a network drive.  Also, it is not listed in the disk management window.  None of my other mapped network drives are no more.   Where can I reallocate the letter of a mapped network drive? In addition, where to see a list of the letters in use by mapped network drives?

  Tips on how to assign a drive letter:

  http://TechNet.Microsoft.com/en-us/library/cc757491 (WS.10) .aspx

  See also:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/can-not-change-drive-letter-Windows-7/37a22203-6add-46e4-8f1d-997b130db362

• I use Foglight 5.6.5 and I was wondring where, in the dashboard - we can see the foglight agents associated ip addresses. There are many times we need the ip address of a host, I want to add a custom dashboard if necessary to include this

  I use Foglight 5.6.5 and I was wondring where, in the dashboard - we can see the foglight agents associated ip addresses. There are many times we need the ip address of a host, I want to add a custom dashboard if necessary to include this

  George, was the question that you asked:

  "How can I find the IP addresses of remote hosts being monitored?

  or

  "How can I find the IP address of the FGLAM server that is monitoring?

• BlackBerry smartphones can not see the maps on my "BOLD"?

  Hello

  I just theBold on Orange in the United Kingdom and I do not see the maps app anywhere.  I can see it listed as version 4.6.0 under the list of Applications but can not see the software somewhere?

  I'm mean't to enable it somehow?  Also can not get the GPS function works as it says "failed to update GPS location" when I click on refresh?

  Any help would be really welcome

  If your provider blocks the passage of the icon (like AT & T) to another theme (Options-> themes) and see if you can find it. You may also download. Check mobile.blackberry.com from your BB browser.

• How long does it take for the custom field created in SFDC appears in the list of field mapping?

  How long does it take for the custom field created in SFDC appears in the list of field mapping? I hit the refresh field button, but it does not appear after 5 min. I just need to have patience?

  I had the same problem yesterday, I think it took about 10-15 minutes to appear.