Select list based on another list select

Similar Questions

• Display list items based on another element of the list

  Hi all

  I want to display the list item based on another element of the list, but his does not work.

  This is my code:

  
  

  / * WHEN-NEW-FORM-INSTANCE * /-his work.
  DECLARE

  rg_district recordgroup;

  rg_name VARCHAR2 (40): = "district";

  vtemp NUMBER;

  BEGIN

  rg_district: = FIND_GROUP (rg_name);

  IF ID_NULL (rg_district)

  THEN

  rg_district: =.

  CREATE_GROUP_FROM_QUERY (rg_name,

  'select dist, dist district_mas.

  );

  vtemp: = POPULATE_GROUP (rg_district);

  POPULATE_LIST ('BLOCK3.) Of RIDING ", rg_name);

  END IF;

  END;

  * / CHANGED AFTER a - list * /-does not work. Cannot complete the list based on the list

  DECLARE

  rg_branch recordgroup;

  rg_name1 VARCHAR2 (1000): = "branch";

  vtemp NUMBER;

  BEGIN

  rg_branch: = FIND_GROUP (rg_name1);

  IF this is ID_NULL (rg_branch)

  THEN

  DELETE_GROUP (rg_name1);

  rg_branch: =.

  CREATE_GROUP_FROM_QUERY

  ("rg_branch",

  "SELECT FROM dist_branch WHERE district IN branch (DIST DISTRICT_MAS WHERE DISTRICT = SELECT').

  || : BLOCK3. DISTRICT OF

  );

  vtemp: = POPULATE_GROUP (rg_branch);

  POPULATE_LIST ('BLOCK3.) Branch of THE ', rg_branch);

  END IF;

  END;

  Table:
  

  CREATE TABLE DISTRICT_MAS

  (

  DIST VARCHAR2 (100 CHAR)

  );

  CREATE TABLE DIST_BRANCH

  (

  NEIGHBORHOOD VARCHAR2 (100 CHAR),

  DIRECTORATE GENERAL OF THE VARCHAR2 (100 CHAR)

  );

  Values:

  insert into district_mas values ('chennai');

  insert into district_mas values ('coimbatore');
  
  insert into dist_branch values ('chennai', 'chennai_north');

  insert into dist_branch values ('coimbatore', 'Podanur');

  
  

  Concerning

  Nassik M

  I tested the code below when the list has changed

  
  

  DECLARE

  rg_branch recordgroup;

  rg_name1 VARCHAR2 (1000): = "branch";

  vtemp NUMBER;

  QT VARCHAR2 (10): = "';

  BEGIN

  rg_branch: = FIND_GROUP (rg_name1);

  IF this is ID_NULL (rg_branch)

  THEN

  DELETE_GROUP (rg_name1);

  END IF;

  rg_branch: =.

  CREATE_GROUP_FROM_QUERY

  (rg_name1,

  'SELECT branch, branch OF THE DISTRICT WHERE the dist_branch =' | QT | : BLOCK3. DISTRICT OF | QT);

  vtemp: = POPULATE_GROUP (rg_branch);

  POPULATE_LIST ('BLOCK3.) Branch of THE ', rg_branch);

  END;

  Hope it's work...

  Hamid

• Choose field from the joined table based on another field?

  Hello!
  
  Is it possible to select a field in a row of attached table based on another field? Consider the following data in the CVALUES table:
  

  ID  C1   C2    C3    C4    C5    C6
  T1  9.6  10.3  12.4  19.6  19.6    0
  T7  9.6  10.4     0     0     0    0
  T3  8.2   9.9  11.4  19.6  19.6    0
  T8  8.3  10.7  13.5  20.7     0    0
  T5  9.4  10.3  12.7  22.9  19.6    0
  ...

  And the following data in the table MDETAIL:
  

  ID           MDATE        CNUM     ...
  T1  03/28/2012 18:00:00    4
  T1  03/28/2012 18:00:00    1
  T8  03/29/2012 06:00:00    6
  T8  03/29/2012 06:00:00    5
  ...

  I want to get the column corresponding to the VALUE field in the table MDETAIL CVALUES. I'm doing this:
  

  SELECT m.t1, m.mdate,
         CASE WHEN m.cnum = 1 THEN c.c1
              WHEN m.cnum = 2 THEN c.c2
              WHEN m.cnum = 3 THEN c.c3
              WHEN m.cnum = 4 THEN c.c4
              WHEN m.cnum = 5 THEN c.c5
              WHEN m.cnum = 6 THEN c.c6 END AS cvalue
    FROM mdetail m
    JOIN cvalues c ON m.id = c.id

  The CVALUES table records are unique; only one line by ID.
  
  This method works and it's fast, but it's messy code and I think there must be a better way to do it. I use cvalue value in several calculations so each calculation that I use is this giant glob of CASES inside!

  Hello

  With a decoding it would be easier, but as ugly :-)

  SELECT m.t1, m.mdate,
         DECODE( m.cnum , 1 , c.c1, 2, c.c2, 3, c.c3, 4, c.c4, 5, c,c5, 6, c,c6) cvalue
    FROM mdetail m, cvalues c
    WHERE m.id = c.id
  

  Success!

  FJFranken

• Delete based on another column dublicate records

  How can I remove duplicate records, based on another column.
  
  the table structure
  CREATE TABLE IA_EXPORT_LEVEL
  (
  A_NO VARCHAR2 (22 BYTE),
  IM VARCHAR2 (18 BYTE),
  ctn_level NUMBER (2)
  )
  
  reviews
  A_NO IM ctn_level
  
  S1 S1 1
  S1 M1 2
  S1 h1 3
  H2 S2 1
  S2 h2 2
  S3 h1 2
  S3 h1 3
  S4 h6 4
  S4 h6 5
  
  I want to delete all records other than the minimum value of the ctn_level
  
  output should like below
  S1 S1 1
  H2 S2 1
  S3 h1 2
  S4 h6 4
  
  Published by: OraFighter on December 16, 2011 13:44

  DELETE FROM IA_EXPORT_LEVEL where rowid IN
  (select rid from
  (select rowid rid, row_number() over (partition by A_NO,IM order by ctn_level) rn from IA_EXPORT_LEVEL )
  where rn > 1 )
  /
  

  Hope your question.

• Make a mandatory DFF field based on another field

  Hi all
  
  We have a requirement where we need to do a mandatory DFF field based on another field.
  
  example:
  
  FDF has two fields:
  
  Depose1: the values 'Email', 'Fax '.
  Depose2
  
  If "Email" is selected in 'Field1' Field2 should become mandatory.
  
  All entries on this will be really useful.
  
  Thank you and best regards,
  Satya.

  Please see old topics that cover the same subject - http://forums.oracle.com/forums/search.jspa?threadID=&q=DFF+AND+mandatory+ANd+Dependant&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001

  Thank you
  Hussein

• loop chart - the chart is based on another query

  I'm working on a report of BI Publisher. The report displays information for a list of stores (store group, by store - each store page break is a page). Now, we want to add a chart (weekly sales - group per week) for each store, we know there is "table within the group" box, we can use, but our problem is that the chart is based on another query, not the original group by query parent store. Could you please help? Detailed information can be provided if required.

  Please check your Inbox.
  I sent you the answer.

  See you soon

  Jorge
  p.s if this answers your question please give the points and close the message

• Update of the table based on another

  Hello
  
  I'm trying to update a date column in a table based on another table. There is a unique ID in each table that identifies and connects each person:
  

  update patient_bu a set a.entry_date = (select b.entry_date from CLIENT_MED_DT b where a.id = b.id)

  This is the error:
  
  ORA-01427: einreihig subquery returns multiple rows
  
  
  The problem (I think) is that the select statement back several dates for records people. There are some people / records that have multiple entry dates, but I'm only interested in the most recent date.
  
  How can I update this table with only the most recent date?
  
  Thanks for any help,
  Matt

  Oh well, I forgot the UPDATE clause:

  SQL> create table patient_bu
    2  (id number
    3  ,entry_date date);
  
  Table created.
  
  SQL> create table client_met_dt
    2  (id number
    3  ,entry_date date);
  
  Table created.
  
  SQL> merge into patient_bu a
    2  using (select id
    3               ,max(entry_date) max_date
    4         from   client_met_dt
    5         group  by id
    6        ) b
    7  on    (a.id = b.id)
    8  when  matched then update
    9        set a.entry_date = b.max_date;
  
  0 rows merged.
  

• Default value for the prompt based on another request

  Hello:
  
  I have a requirement where I need to define default values of messages based on another request.
  
  The guest is a quick Date.
  
  I have tried using the presentation variable and sql query writing, where is written "WHERE promo_id = @{variable}" "
  
  but it still does not.
  
  Please let me know a workaround for this problem.
  
  Thank you.
  
  -Vinay

  What determined your operator BETWEEN End Date? I guess it's variable. In addition, is the second report on the same page or another page of dashboard? Assuming that the two reports are on the same page, do the below. If this isn't the case, you can use the same guests on the second page of dashboard. Define the scope of "dashboard" and the selection of the user is wearing on the second page.

  The easiest way is to have 3 guests of dashboard: Promo_ID, Start_Dt and end_date. assign to these guests PVs: pvPromoID, pvStartDate and pvEndDate, respectively.

  Filter a report on pvPromoID and pvStartDate.

  The second report on the pvPromoID of the filter and use pvStartDate in the filter of the two report Date column. Assuming that the values BETWEEN are variable, so you can write the following on the column of your second report:

  "Table name". " Date ColumnName.<= '@{pvstartdate}'="" and="" table="" name"."date="" column="" name"=""><>

  And your Promo column, use the filter "Table name". "Class = ' @{pvPromoID}"

  When the user selects the Promo ID, Start Date and end Date in the guests, the first and second reports will be filtered accordingly.

• best way to create a table based on another table

  Hello
  I am trying to create a table based on another table with all the data in it. It contains important data.
  
  create table < tablename > select * from table1.
  
  Is the best way to do it, or is there another way. Please advice.
  
  Thank you

  Insert / * + append * / in as select * from ;

  It should be->

  insert /*+ append */ into 
  select * from ;
  

  Kind regards.

  LOULOU.

• How do column filter based on another column

  In my report, I have column a thru d. I would like to create a filter based on another column where column is column B. I can enter a value that the column cannot be equal to, but I would use a column instead of a value.
  
  Thank you.
  Jonathan

  Try this: icon on the filter columns->-> convert this advanced filter for SQL
  You can reference any other column

  BTW: Have you had a chance to look at my suggestion for your post
  Tables from a Table

• BC4J editable attribute based on another attribute

  Hello.
  
  Is it possible to define updatable (read-only) on BC4J, based on another column. For example if attribute a == true which attribute the (Always) b.setUpdatable of other b.setUpdatable (Never). By definition, changing Updatable property to EO/VO for each line is an absurdity. Or not?
  I know how to do it on ViewController (set ReadOnly property expression EL provided you attribute a different value) but don't know how to do (if it is possible) on model?
  
  THX
  
  Concerning
  Zmeda

  zmeda,

  You can override isAttributeUpdatable() on your EntityImpl or ViewRowImpl classes

  John

• Get the cumulative values in a single column based on another column in reports

  Hi all
  
  I have a requirement to get cumulative values based on another column.

  I 'Sales rep name' in the first column.
  Correspondent "Values of the invoice line" in the second column.
  Want to have cumulative of all the values for each sales invoice line.
  Then apply rank and display the top 10 sales reps based on invoice lines.

  Since there is no rank option in the PivotTable, I do this in the report table.
  
  Looking for the best entries...
  
  Thanks in advance...

  Try below
  2nd column: "name of Sales rep.
  column 2: SUM ("invoice line values ' BY 'Name of Sales rep'") and sort this field desc.
  3rd column: fx RANK (SUM ("invoice line values" BY "Sales rep name")), to hide this column, so that you don't confuse your users.

  and put the filter on the 3rd column below 5

  I hope this works for you

• How to get the print page numbers in a report based on another report

  Hello
  
  
  I have a requirement in which I need to print the page based on another report number
  example my game application has 3 reports
  
  1 report prints the pages 1-100
  Report page no. 2 should start from 101 to 110
  3 report 111-
  
  Can someone make me please how to do this?
  
  THX in advance
  Kumar

  Hello

  You can create all report queries three in a single report, create a separate query in the data model and then create the layout in the proper sequence as required.

  If you want to use separate reports only you can try the following:

  In the first report, use the shutter release after report and record the total number of pages of a table as a record.

  In the second report, extract the value stored in the table and add it to the Page No. to get the Page number for the second report.
  Also in the second report use the shutter release after report and update the record created first in the total number of pages + total number of pages of the first report.

  In the third report to extract the value stored in the table and add it to the Page No. to get the Page number for the third report.
  Don't forget to delete the folder created in the trigger after the third report table report.

  I hope this helps.

  Best regards

  Arif Khadas

• Dynamically update list of Val, based on another selection list?

  4.2.1

  Hello world

  We have two LOVs. Both were static values. LOV1 has values static 1,2,3,4.  LOV2 has values static 10,20,30,40 and some texts. Now when the user selects 2 and 4 of LOV1, then LOV2 should display only 10 and 20.

  I know there are waterfall LOV in 4.0 from, but I think that works very well for the table based LOV query? You are not sure if they can be used for static ones? Any help or suggestions on how to do it?

  Thank you

  Ryan

  ryansun wrote:

  4.2.1

  Hello world

  We have two LOVs. Both were static values. LOV1 has values static 1,2,3,4.  LOV2 has values static 10,20,30,40 and some texts. Now when the user selects 2 and 4 of LOV1, then LOV2 should display only 10 and 20.

  I know there are waterfall LOV in 4.0 from, but I think that works very well for the table based LOV query? You are not sure if they can be used for static ones? Any help or suggestions on how to do it?

  Use the built-in support in cascade LOV by converting the static LOVs for dynamic queries, including the relevant restrictions in the WHERE clause in LOV2:

  LOV1

  select '1' lov_label, '1' lov_value from dual
  union all
  select '2', '2' from dual
  union all
  select '3', '3' from dual
  union all
  select '4', '4' from dual
  

  LOV2

  select '10' lov_label, '10' lov_value from dual
  union all
  select '20', '20' from dual
  union all
  select '30', '30' from dual where :p1_lov1 not in ('2', '4')
  union all
  select '40', '40' from dual where :p1_lov1 not in ('2', '4')
  

• Based on another selection LOV LOV

  Hello

  Apex Version: 4.2

  I struggled to get a LOV to be based on the selected value of an another LOV on the same page without submitting the page.

  For example. I have two LOV ' page.

  The first is a LOV region and the second is a LOV box.

  I want the list returned by the LOV area to include only the areas of the region which has been taken from the area of LOV.

  Is this possible without having to submit the page?

  I'd appreciate any help.

  Concerning

  Dominic

  Maguzzi wrote:

  Apex Version: 4.2

  I struggled to get a LOV to be based on the selected value of an another LOV on the same page without submitting the page.

  For example. I have two LOV ' page.

  The first is a LOV region and the second is a LOV box.

  I want the list returned by the LOV area to include only the areas of the region which has been taken from the area of LOV.

  Is this possible without having to submit the page?

  Integrated support in cascade LOV is addressed in the documentation.