Select the arrow confusing in ID5

Similar Questions

• After typing the web address in the address bar I can no longer just press on enter for the webpage to load, I have to use the mouse to select the arrow at the end of the address bar

  I downloaded the latest version of firefox and since then when I type a web address in the address bar, I can not only support on enter to get onto the site I want, instead, I have to use the mouse to point the arrow at the end of the address bar and click it.

  Driving me crazy! Never had this before!

  Which may be caused by the add-on AVG safe browsing. Disable this extension if you have it installed.

  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

• When I cliquer click on 'Choose', then select the arrow down, only 5 of my folders are displayed. How do I see other folders so I can save the bookmark where I choose.

  I use Windows XP, Mozilla Firefox 3.6.13. I'm used to be able to select one of my folders when you save a bookmark. Now, it only allows me to choose among 5 (always the same 5). What is going on?

  Could be a problem with the places.sqlite file that stores the bookmarks and history. Read carefully the following. Make a copy of your places.sqlite to avoid losing all your bookmarks.

  See: http://kb.mozillazine.org/Locked_or_damaged_places.sqlite

• The Enter key does not work in the address bar; I have to manually select the icon ' go to ' since the upgrade to Version 10.

  I just upgraded to Firefox 10. When I manually enter a URL in the address bar, press 'Go To' does not focus, then the Enter key will not work. I have to manually select the arrow "go to" to navigate. Any suggestions?

  This could be the extension of AVG safe search. If you have installed, try disabling it. Instructions here: use the extensions to add functionality to Firefox

• Selection of the tabs and the arrow keys Tab Switching

  Older versions of Firefox had this feature. Before 3.0, Firefox allow you to select the text around a tab by clicking through, allowing you to scroll the tabs using the arrow keys. After 3.0, you could do this by clicking on the left and then immediately right clicking. I have since past 12 Firefox, and I can't seem to find this feature, even if it is useful for me. Is there a solution or a way to do this in Firefox 12 I don't know? Addons which adds this functionality or a parameter, would be greatly appreciated.

  EDIT: I know there are other ways of the tabs, but the arrows were particular dresser.

  In fact, I found a good work-around (which was rather hidden) which is exactly the same functionality as before, but in several stages.

  If you're like me and you wanted it, do the following:

  -Press Control-K-
  -Press tab-
  -Take advantage of arrow tab switching!

  I don't know why it happened progressively more difficult over the years, but at least I can still do it.

  Thanks to cor.el, or something like that.

• LabVIEW 2009 SP1 crashes when moving large selection with the arrow key

  If I select a lot (10 or 15) diagram components and try to move some distance with the arrow button, I'm often a program crash.  Because a reduced number of components seems to hang after a longer distance traveled, it looks like some sort of buffer overflow error.  I don't see this problem when you use the mouse to move selections.

  I checked to make sure I have the latest version of the video driver for my NVIDIA Quatro FX570.  I also tried to work with no hardware acceleration and no handset, written.  What happens on Windows XP SP3 with all current updates.

  It became so bad that I have to do a save as every fifteen minutes to avoid losing data.

  Why not use my mouse for all movements?  Because it is not as specific and not so easy to limit to only one dimension of the movement.   My hand is not as stable as it once was.

  I'm hoping someone will have a suggestion that will clear up this problem.

  As I have indicated, I had the same problem with 8.5 and just DID a new install of Labview 2009.

  Since it is possible that my three monitors configuration, which of course requires more memory video, may be at the origin of the problem, I am satisfied with workaround by dragging the objects closer to their final destination and then using the arrow keys.

  Three monitors are ideal for the front, block and help/Internet/probe damaged.  When I got to work in the field with a single monitor, I felt severely handicapped.

  You can consider the issue closed.

  Thank you for trying to reproduce the failure.

• When one of my users start CC and select applications, nothing is displayed, only the arrow circling. What is c?

  When one of my users start CC and select applications, nothing is displayed, only the arrow circling. What is c?

  It is resolved, they did not have local Admin rights.

• direct selection - move the anchor points with the arrow keys of the keyboard

  Hello

  I use Illustrator CC.  I just use the image tracking tool to create a version vector of my company logo.  It worked pretty well, but now I'm just trying to clean it up a bit.  I have a few anchor points that I want to just push upwards or downwards into the smallest possible increment.

  I think it would be easier for me to do using the arrow keys on the keyboard instead of the mouse, but the arrows cause my selected anchor point to jump in too large a distance way.  I checked to make sure that the bearings commented, snap to grid and snap to Point are all extinct.  I don't see anything else to do.

  Can someone tell me which control how the keyboard arrow keys will move an anchor point, and how can I fix this to the smallest possible distance?

  Thanks in advance,
  Paul

  General Prefs, area keyboard Increments. Have something you need.

  Then use Nudge (up, down, left, right arrow).

• Moving objects selected with the arrow keys

  I often position objects by selecting them and moving them with the arrow keys. However, increasing the default value is often too large. I know the Illustrator has a setting in preferences to change the increment. Is there a similar parameter in FreeHand? I have not found one. Thanks for any information.

  > I often position objects by selecting them and moving them with the arrow keys.
  > However, the default increment is often too big. I know that Illustrator
  > has a setting in the preferences to change the increment. Is there a
  > similar parameter in FreeHand? I have not found one. Thanks for any information.

  Main menu: file > Document settings > remote cursor

  Oddly enough named but more Freehand this other feature before many started programs "pushing".

  If the parameter "will not stick' open the default page (see Preferences / Document /"New Document Template") make the frame and save, as for example MyDefaults.ft11 preference.

  Jukka

• When I select a page in the address bar is not there when I press on enter. I have to run with the arrow.

  I was able to hit just enter on websites in the drop down, before, but now it does not work. I tried the upgrade to FF4 thinking that it can solve my problem but not yet, I have to use the arrow at the end of the address bar to run to the page.

  If this does not work properly in mode without failure, then disable all extensions and then try to find out who is the cause by allowing both the problem reappears.

  • Choose "Disable all add-ons" on issues to troubleshoot Firefox in Safe Mode to set window to disable all extensions.
  • Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

• The beginning here arrow confuses employees, peut it be changed?

  All,

  The question that the program puts the default "start here" arrow at the top of the document must be signed (or anywhere where the first field is to), and therefore employees believe they should actually do something, instead of just scrolling to the bottom of the document (which can be many pages long) and where they sign.  When all they really do is immediately scroll down to sign.

  The final signatory should not see an arrow 'start here' at the top.  It would be better if the arrow 'start here' is at the bottom so that the signatory know they ignore everything else.  The best solution would be if the program would be the automatic scrolling of the document to the correct location of the required signature or wherever this signer must first Act (normally the last signatory just to sign the document at the end of the document).

  Basically, we want the arrow 'start here' to point to the first place that a signatory is required to enter data (their signature or other).  It would be probably different for each signatory.

  Is - this configurable?

  Thank you

  GeoffW

  Hi geoffw75979389 ,

  Please ensure while placing the fields in the document, you did "Required" and assigns them to the appropriate signatory so that the signatories are directed to the appropriate field for data entry.

  Create form: Create forms

  Field Type field types :

  Assign roles: assign roles to form fields

  Field validation: form field validation

  Appearance of field: set the appearance of the field

  Kind regards
  Nicos

• Impossible to select the uniqueness

  I'm unable to select unique characters in documents Pages by using my trackpad. I click on w/one finger, then check the box on the other hand, as I always have done and can do in this online editor. The character will show in blue light, but as soon as I raise my left finger of the trackpad to type, the highlighting disappears. For awhile, I thought that it was not possible to replace a selection in a document typing, as typing would be always inserted beside the original characters. This feature works sometimes, but does not work most of the time.

  Pages using 5.6.2 & El Capitan.

  I'm not on a Mac at the moment, but you can use a combination of arrow keys + shift + option keys to select the different characters, words, lines, paragraphs and documents together.

  Experiment.

  Peter

• Double click on the arrow to the left on the tab bar creates a new tab at the end of the right hand.

  With Firefox 29.0.1 by double clicking on the arrows on the right in the tab bar or the left creates a new tab at the end of the right hand of the tab bar. It is embarrassing behavior that violates standards around UI design click and double-click. A double-click should extend the behavior of the single click rather than do something completely different (opening a new tab). An example would be, in a Word, a single click selects a Word, double click selects the sentence and a triple click selects the paragraph. Note that this is a separate issue from double click the tab bar itself to create a new tab.

  When there are more tabs on the tabs in the window toolbar, that highlight the tabs on the side will not hold show tab in use. I can click on the left and right arrows at the end of the tab bar to scroll the bar in this sense to bring a tab I want to select in the display. I believe that the double click on the arrow to the left would scroll the bar completely to the right, exposing the tab on the left Double click on the right arrow would scroll the bar left entirely exposing the rightmost tab.

  It is a logical extension and expected behavior of single click. Single click - scroll once (seems to be the value of the tab in three), double-click on - scroll all the way.

  For now, if I want to access the tab on the left, I have to click the arrow slowly and carefully until I get to it. I used only one quick click on the arrow to the left until that shponkah stop scrolling without having to count how many clicks. It is possible that my simple quick clicks were actually double-click. However, the bar tabs would stop scrolling when it reaches the end.

  Now, the behavior is really annoying and unexpected. Double click on left dead entirely right tabs completely left arrow and creates a new tab at the end of the right hand. Ditto the arrow right in the opposite direction.

  While I can (maybe) see that the value of a double click on the tab bar itself to create a new tab, double click on one of the scroll arrows should show a new tab.

  Double click on the arrows of the tab should scroll the tab fully for this purpose bar. If the tab bar is already entirely Scrolls towards ending extra clicks (single, double and triple...) should be ignored.

  I like the idea of opening a new tab to the right of the one that has the focus. This should be an option of the contextual right click menu.

  That should not occur if you click the scroll buttons in the tab bar.
  A double-click should act as page up/down and move a full screen and a triple click should move to the left (first tab) or the right (last) until now tab.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• I can't scroll my podcasts more since the update to iTunes 12.4. I can only use the arrow keys to go through my podcasts, and then take it all down.

  I have a MacBook Pro and update to the latest iOS and iTunes. I can't scroll in my podcasts to choose which episodes to synchronize. I can only use the arrow keys to navigate, but then while he list of podcasts on the left, it moves also down from the bar on the list of episodes, so by the time I spend the first 7 or 8 I can't see the episodes more to choose which to add/remove.

  Same here, very frustrating.

  I found if you go in your library > Podcast, then control click on the podcast, you can select Add to the device, which works, but is in no way acceptable.

• Since upgrading to Firefox 10.0.2 my AVG extension had to be disabled, because key after typing in any web address in the address bar, had no effect and I couldn't go to the site without pressing the arrow of charging on the right.

  I've recently updated Firefox to the latest version 10.0.2. After that I could not enter any website address and press the Enter key and get on the site, neither could I select a Web site in the drop-down list of sites visited previously. The only way I could get there by pressing the arrow to the right of the address box (reload current page). Once I disabled the extension AVG, everything worked normally. As soon as I activated the extension AVG, it stopped working again.

  Known issue. See:

  • http://www.avgforums.com/viewtopic.php?f=4 & t = 1726 #p6050

  Try what sc123 suggested the link above. Send an email to [email protected] with your full license key and let them know. I'm sure his AVG question not related Firefox. :))