Select the full column in TableView on click in the cell

Similar Questions

• Select the cell & Excel sheet

  I currently have hundreds of files that have 3 excel sheets.  Some files have been saved with the first worksheet open, others when the second sheet is open and some when the third sheet is open.  When one of these files is automatically opened it opens to the sheet that was displayed when it was last saved. I need to write a LabVIEW program which opens each of these files, formatting, makes sure that a1 is selected cell in each leaf and make you the first sheet is open when it is saved, so that it opens with the first sheet showing.  I'm new to ActiveX, but I already understood the formatting, and I do the formatting in worksheets 3.  I just can't understand how to choose which cell is selected and which sheet is displayed. Thanks for the help, Jeremy

  Try the attached VI.   It was adapted from:

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/60

  I had to change the content of the cell on the worksheet that is desired to keep this sheet on top when recording.  You could probably just change an attribute (font size, etc.) if it is not desirable to change the contents of the cell.

  Note: the name of the journal that is selected on the front panel is the sheet that will be on the top of the opening.

• Return all column names of the cells that match a value in a single cell

  

  I want to be able to scan all the cells in column 1 in column 3 (there could be several) which belong to the same line and check if they all have a value y (X). If they have no value, I want all columns to display all the names of the matching columns as follows: "column 1, column 2" for Elemento.

  This can be a good start:

  

  B2 = if (counta (C2) > 0, C$ 1, "" ") & IF (COUNTA (D2) > 0', ' & D$ 1," ") & IF (COUNTA (E2) > 0', ' & E$ 1," "") & IF (COUNTA (F2) > 0', '& F$ 1,' ')

  It's shorthand dethrone select cell C2, then type (or copy and paste it here) the formula:

  = IF (counta (C2) > 0, C$ 1, "" ") & IF (COUNTA (D2) > 0', ' & D$ 1," ") & IF (COUNTA (E2) > 0', ' & E$ 1," "") & IF (COUNTA (F2) > 0', '& F$ 1,' ')

  Select cell B2, copy

  Select the cells B2 the bottom of column D, dough

  To add additional columns, you copy the atomic unit:

  & IF (COUNTA (D2) > 0', '& D$ 1,' ')

  and update D2 with the new column and D$ 1 with the new column.

  then... If you add a new column (G, for example) that you want to change it:

  and IF (COUNTA (D2) > 0', '&D$1,' ')

  TO

  and IF (COUNTA (G2) > 0', "&G$1," ")

  and the updated formula would be:

  = IF (counta (C2) > 0, C$ 1, "" ") & IF (COUNTA (D2) > 0', ' & D$ 1," ") & IF (COUNTA (E2) > 0', ' & E$ 1," "") & IF (COUNTA (F2) > 0', ' & F$ 1,"") & IF (COUNTA (G2) > 0', '& G$ 1,' ')

  fill down like before

• Counting of string separated by commas in the cells of a column

  Hi all

  Try to pass some of my Excel spreadsheets in numbers. I'd appreciate help with a specific string of text/number in the cells in a column. In the example below (no sheet of complete works) is a column, the packs work (WP01, WP02 and so forth)-which means work packs a particular Test & Validation document (e.g. TV-102) applies to.

  I would like to be able to simple counting the number of occurrences, say "WP05", is applicable. If I use COUNTIF, on the "WorkPack" column, he has only the cells that contain only the string "WP05" (i.e. in the sheet, I work with, I know there are 22 entries for "WP05" in the column of pack work, but only the 14 account)

  Note: I am building this on my MAC, but would like to be able to access and use these sheets on my iPad - don't know if that makes a difference.

  Any suggestions / ideas?

  Thank you in advance...

  ATB Perry

  ID	Paper group	WorkPack
  TV-91	Validation of NFR	WP05 WP06
  TV-102	Certificate of conformity	WP05 WP06
  TV-103	Validation of NFR	WP05 WP06
  TV-206	Test EN	WP05
  TV-207	Test EN	WP05
  TV-208	Test EN	WP05
  TV-209	Test EN	WP05
  TV-212	Certificate of conformity	WP01, WP02 WP03, WP04, WP05, WP06, WP07, WP08 MICROSOFT WINDOWS CURRENTVERSION, WP09, WP10, WP11, WP12, WP13, WP14, WP.15
  TV-213	Validation of NFR	WP01, WP02 WP03, WP04, WP05, WP06, WP07, WP08 MICROSOFT WINDOWS CURRENTVERSION, WP09, WP10, WP11, WP12, WP13, WP14, WP.15
  TV-214	Test EN	WP01, WP02 WP03, WP04, WP05, WP06, WP07, WP08 MICROSOFT WINDOWS CURRENTVERSION, WP09, WP10, WP11, WP12, WP13, WP14, WP.15
  TV-215	Validation of NFR	WP01, WP02 WP03, WP04, WP05, WP06, WP07, WP08 MICROSOFT WINDOWS CURRENTVERSION, WP09, WP10
  TV-308	Validation of NFR	WP01, WP02 WP03, WP04, WP05, WP06, WP07, WP08 MICROSOFT WINDOWS CURRENTVERSION, WP09, WP10, WP11, WP12, WP13, WP14, WP.15
  TV-338	Test EN	WP05

  Here's how I would approach (without more):

  

  Add additional columns to your table (those titled "WP01',"WP02", etc.).  Enter the names as shown

  The first line is a heading row.

  Also... Add an extra line at the end and make a footer row

  D2 = (LEN ($C2) −LEN (REPLACE ($C2, D$ 1, ""))) ÷LEN ($1 D)

  It's shorthand dethrone select cell D2 and type e (or copy and paste it here) the formula:

  = (LEN ($C2) −LEN (REPLACE ($C2, D$ 1, ""))) ÷LEN ($1 D)

  Select cell D2, copy

  Select cells D2 the bottom of column R, paste

  in the footer row (row 15 of this example) iff the following formula:

  D15 = Sum (D)

  Select the cell D15, copy

  Select the cells D15 thru R15, dough

  I could never find 22 WP05 instances (even when I search your message on this web page):

  

• Alignment of the cells in the table

  How to view a table in a cell without any gap between the table border and the cell in which the table is inserted?
  
  Published by: user9210086 on November 22, 2010 12:19 AM

  Select the cell.
  Make a right click-> properties-> cell options Table-> uncheck 'Identical to the table' and set the margins of cell values of left and right to 0

• Problems with the cell in the table borders

  I'm trying to get a solid pt 2 on the left side of the first green column.  Even though I have selected the entire table and chose to not not for shots of the border, when I apply the 2pt stroke left side, there are white lines at the intersection of each cell in the row.  I am attaching the file and a screenshot (if the screenshots are here - I'm obviously new).  Thank you!

  

  There is a 1 pt stroke applied to the horizontal. I had terrible luck, myself, with the formatting of the tables, but if you select the cell, and then select only the horizontal lines in the formatting options, you can set them to 0 and they will go far.

• Where is the menu of the cell in numbers for iOS?

  In one of the recent figures for updates to iOS, I lost a feature that I have relied heavily on: menu of the cell. Before the update, when I typed in a cell in a spreadsheet, a menu of choice would jump upward. The main thing I've used has been remove, but there are other choices as well (I don't remember what they were).

  Has anyone else seen elsewhere?

  Now, in order to remove a value in a cell, I double tap, go back and accept (3 operations). Because my cell values are often the results of formulas, I usually have to go back twice.

  If there is a better way to remove a cell value, please enlighten me!

  Thank you!

  JOINT APPEALS BOARD

  Hi NoJABWhere,

  The menu still opens for me. It usually takes 2 taps discreet-no is not a double tap. The first selects the cell, the second brings up the menu.

  Quinn

• delete the cell style - to preserve formatting

  Hello scripters.

  Is it possible to preserve the formatting when I remove a cell applied by the following code style?

  "MyCellStyle.remove (app.activeDokument.cellStyles.firstItem ());

  How can I access this feature in my script? (see also the screenshot-> red arrow)

  

  Thanks for the tips.

  Roland

  Roland:
  You can browse all your cells with the applied cell style, select the cells, one after the other and apply a menu action to break the link style ("Break link to Style" / "Operation mit Format Hegelian").

  You can then delete the cell style without losing any formatting.

  To invoke the menu action, you can use this code. For security reasons, I've got it wrapped up with a "try/catch":

  //Disconnect the cell with the applied cell style (option in the cell styles panel of the UI: "Break Link to Style" / "Verknüpfung mit Format aufheben"):
  try{app.scriptMenuActions.itemByID(132129).invoke()}catch(e){};
  

  Uwe

• Alignment of the cell

  Hi all

  Sorry if it's a very simple question, but I am struggling to align an image at the center of a cell in my current table of the horizontal arrangement.

  
  I selected the cell and the horz'air align property as Center with green align by default from the property, but when previewing with firefox the image is not sitting in the center of the browser window.

  I've also selected the image in Dreamweaver and have put its align property absolute average

  In my preview of Dreamweaver (design) window the image also seems not be aligned to the Center.

  Any help much appreciated.

  have you tried Centre align the image with css? Give thecell that the image is inserted in an 'id' (as shown below)

     

  Then use css to center the content of thecell:

  {#centerImage}

  text-align: center;

  }

• Select the options for ALL but some in OBIEE prompt with a single click

  Hello guys,.

  I have the below requirement

  I have a prompt that displays the payment terms.

  On the result - 3 payment terms are the terms of payment we and the rest are Global.

  A user will select these 3 conditions of payment of the United States or the reset of the (Global) payment terms, but not all.

  Y at - it somehow I can create an option that selects all terms of payment with one click (as the option all columns)

  also, I'm trying to use all of the columns, which is to select all the columns including US and global, but once the user selects all the column option - the user is not able to selectively disable certain values.

  Is there a work around for this?

  Please let me know because this would be a great help for me.

  Thank you

  Why don't make you a second guest of the column where you add the CASE WHEN to produce the 2 types of terms (US & Global)?

  Then using the "limited by" you auto-filtre the actual list of terms of payment based on the first selection and is to meet your requirement to select all of the USA or Global all with just 1 click.

  The user you want to select just 1 term given? Just ignore the first field of the prompt with the groups and directly select the one required in the second field.

• Select the column in a Flash datagrid?

  When a person uses a datagrid control, is there a default way (only with no additional coding) to select an entire column?

  Now when I click on the header, it changes the order. Is there a Ctrl key + click combo that does this?

  See you soon

  as far as I know, you need to encode that yourself.

• Clicking on a video clip selects the entire clip, rather than the range.  I did the update and it still happens.  Help!

  Problem * by clicking on a video clip selects the entire clip, instead of cuisiniere.* *.

  I restarted my computer like new.  Lost the iMovie app.  Re downloaded in the App Store.  Now I have a crappy iMovie on the App Store application.  Then I made, I got the updated version and I did.  Always update does not resolve the problem.  I'm sucking in a hole because I need to make new videos for work and I can't.  In addition, I'm too broke to buy Final Cut.  In addition, all apple stores have a waiting list of 5 days before they see you!  Thank you Apple with a 6 bites taken out of it!

  I had a similar problem and it was driving me crazy. I think you press and hold the 'R' key now to select a range, otherwise, it will select the whole clip. I think it's a goal a feature and not a bug? Hope that helps!

• I'm trying to export contacts as vcards icloud.  However, after that select the contacts and click on "Export as vcards" nothing happens.  Why?

  I'm trying to export contacts as vcards icloud.  However, after that select the contacts and click on "Export as vcards" nothing happens.  Why?  I tried this using edge and chrome and I run Windows 10

  I just tried with edge on Windows 10. I selected all the contacts, and then click Export, as vCards and nothing happen. Clicked on it again, still nothing. After 4 or 5 click on about 10 to 15 seconds he finally uploaded to the file Edge uses for downloads. I saw it happen before you go to a Mac using the Safari browser, but only 2 clicks were necessary.

• only get a single photo on board contact despite the selection of several columns.

  When you select the photo and contact sheet then, there is only a single photo in the upper left column. Unable to get several copies despite the selection of several columns.

  The contact sheet shows only the photos you selected in the library before going to the page of Contacts.

  If you want to have multiple copies of the same image, you need to duplicate this image enough times so that you get the number you want on the contact page.  Select the thumbnail and use the key combination command + D to duplicate the photo.

  Select all duplicate images, and then go to the Contacts option in the printing process.

  

• Left mouse click selects the button but does not execute the action of the button (for example close)

  HI - this seems to be a problem with Windows rather than the mouse, so any help would be greatly appreciated!

  First of all - I have a trackball M570. Works fine connected to another Windows 7 machine.

  But on a single machine including windows 7... I can use the left click for most, but in some applications, when I click a button it not actually click the button. Yes, he selects the button but it does not perform the button action. I also see the issue in the boxes, I can't put a tick in the boxes. Or at least I just figured someway by combining fast random space bar presses and presses mouse, but it is obviously not right. Couldn't find anything useful in google, so I thought I would try here in hope!

  Thank you for the pointers !

  Cheers, Jim.

  HI - Finally - I found a solution.

  First of all - the following solution worked for me, but there are possible solutions mentioned on the thread I linked in my previous email.

  The mouse is a Logitech wireless, with the SetPoint software installed. I also had a Microsoft wired keyboard and just in case that was the problem, I replaced it and - YES! All good new - in fact explains some other issues, I was less concerned. The problem with the keyboard was somehow screwing of the mouse.

  Since then I have been reduced to a media volume on the keyboard button, no idea how to solve this problem, and the replacement keyboard was free, so just get rid of the old. Note: I could use the old keyboard when I downloaded the Microsoft Mouse and keyboard Center, installed and disabled the offending button.

  Thank you, maybe my solution might help some people out there.

  Jim.