selectBooleanCheckbox: ValuechangeListener runs when rendering

Similar Questions

• Foxfire runs when "Pac Man" plays continuously. How to stop it?

  It started this morning for the first time. He plays when Foxfire is activated, not with IExplorer. Foxfire runs when "Pac Man" plays continuously. How to stop it?

  This has happened

  Each time Firefox opened

  NA

  User Agent

  Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6.4; .NET CLR 1.0.3705; .NET CLR 1.1.4322;. Media Center PC 4.0; .NET CLR 2.0.50727; WWTClient2 .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

  Removal of CoolPreviews 3.1 seems to have solved my problem.

• Keep VI running when the display of pop-up window

  Hello

  I put a button in my program when I click on it and the meesage text appears.

  But when the window opens, the main VI will freeze until I click the OK button on the pop-up window.

  (in the example downloaded, click on the OK button, number will stop adding until I click the OK button on the pop-up window).

  Is it possible to keep the vi running when the display of the popup window?

  Thank you very much!

  Hello

  Hope this link will answer your question. You need develop your own pop up VI and launch dynamically from your main VI.

• How can I stop pragrams running when I turn on my pc?

  How to stop programs from running when I turn on my pc, my help and support says use windows defender, but I can't turn it on

  Hello

  The actual process will depend on the version of Windows that you use - for example.

  Windows 8.

  Go to the desktop.  Right-click on an empty area of the taskbar and launch the Task Manager.  Select the Startup tab and follow the guide in the link below.

  http://www.eightforums.com/tutorials/5180-startup-items-manage-Windows-8-a.html

  Restart the PC for all changes to take effect.

  Windows 7, Windows Vista etc.

  Hold down the Windows key and press R.  For the run box, type msconfig and press ENTER.  In the next window, click the Startup tab, uncheck the box next to each item you want to disable, and then click on apply to apply the change of start.  Restart the PC for the change to take effect.

  Kind regards

  DP - K

• I get a message from DLL run when starting my laptop with Windows 7

  I get a message from DLL run when starting my laptop with Windows 7.  One of the messages is: c:\users\xxx\AppData\Local\fgpise.dll. How can I get rid of these messages? McAfee has detected two Trojan horses and withdrawn earlier today. He says that my system is clean now. Did that cause this problem?

  Hello

  Do not assume that any malware has been removed.

  This is probably the result of malware then do a very thorough check and when the system
  is clean see the following message to remove this error.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER THAT you are sure that the machine is clean of any malware.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• What I need to know is the name and location of the executable that runs when you click on detect monitors in the menu screen resolution of windows 7?

  Original title: name/location of the executable that runs when you click on detect monitors?

  What I need to know is the name and location of the executable that runs when you click on detect monitors in the menu screen resolution of windows 7?

  Hello

  Your question is better suited in the MSDN forums. Please post your question in the MSDN forums.

  You can follow the link to your question:
  http://social.msdn.Microsoft.com/forums/en-us/categories/

  It will be useful.

• How to disable programs and commissioning that run when you start Windows 7

  How to disable programs and commissioning that run when you start Windows 7

  Hello

  References to Vista also apply to Windows 7.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062

  To see everything that is in charge of startup - wait a few minutes without doing anything-
  then right click on taskbar - task manager - take a look at stored by -
  Process - Services - this is a quick reference (if you have a little box on)
  Lower left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Is a quick check to see who are loading method 2 - using MSCONFIG
  then after a list of these here.

  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns shows you the complete list of
  Locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  Monitor Monitor - free - file system, registry, process, thread and
  Activity of the DLL in real-time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are
  loaded automatically when Windows starts. For each application, what follows
  the information is displayed: Type of startup (registry/Startup folder), Command - Line
  Channel file, the product name, Version, company name, location in the registry or
  file system and more. It allows you to easily disable or remove unwanted programs
  that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe
  not. The window Watcher says it all, every window created by each execution of the statement
  program, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• The output html when rendering on browser is slow

  Html when rendering on browser output is quite slow. Made real on Animate is 12 seconds. When the HTML is displayed, it takes up to 26 dry

  performance optimization is a complex subject.  This is an excerpt of development of Flash games: in a Social, Mobile and 3D world which deals with the performance of swf, not html5, but there may be useful especially when you manage vector shapes.

  Optimization techniques

  Unfortunately, I don't know any way completely satisfactory to organize this information. In what follows, I discuss memory management first with sub-themes listed in alphabetical order. Then I discuss the management of CPU/GPU with subheadings listed in alphabetical order.

  This may sound logical, but at least, there are two problems with this organization.

  1. I don't think it's the most useful way to organize this information.

  2. memory management affects the CPU/GPU use, so that everything in the section of memory management can also be listed in the section CPU/GPU.

  In any case, I'll also list information in two other ways, from the easiest to the most difficult to implement and more for much less.

  Two of these later inscriptions are subjective and dependent on experience developer and capabilities, as well as environmental test and the test situation. I very much doubt there would be a consensus on the order of these lists.  However, I think that they are still valid.

  Easier to the more difficult to implement

  1. do not use the filters.

  2. always use the reverse for loops and avoid loops and avoid while loops.

  3. explicitly stop timers for their loan for gc (garbage collection).

  4. use the weak event listeners and remove headphones.

  5. strictly type variable when possible.

  6. explicitly disable interactivity mouse when interactivity smile not necessary.

  7. replace dispatchEvents with callback functions whenever possible.

  8 it would be gc stop sounds for the sounds and SoundChannels.

  9. use the DisplayObject most basic need.

  10. always use cacheAsBitmap and cacheAsBitmapMatrix with air applications (i.e., mobile).

  11. reuse of objects when possible.

  12 Event.ENTER_FRAME loops: use different listeners and different listener functions applied to DisplayObjects as little as possible.

  13. the pool instead of creating objects and gc objects ' ing.

  14. use partial blitting.

  15. use step blitting.

  16 use Stage3D.

  Biggest advantage less

  1. use the blitting Stadium (if there is enough memory system).

  2. use Stage3D.

  3. use the partial transfer.

  4. use cacheAsBitmap and cacheAsBitmapMatrix with mobile devices.

  5. explicitly disable interactivity mouse when interactivity smile not necessary.

  6. do not use the filters.

  7. use the DisplayObject most basic need.

  8. reuse objects whenever possible.

  9 Event.ENTER_FRAME loops: use different listeners and different listener functions applied to DisplayObjects as little as possible.

  10. use the reverse for loops and avoid the do loops and while loops.

  11. the pool instead of creating objects and gc objects ' ing.

  12. strictly type variable when possible.

  13 use weak event listeners and remove headphones.

  14. replace dispatchEvents with callback functions whenever possible.

  15. explicitly stop timers on loan for the gc.

  16 stop sounds for the sounds and SoundChannels be gc would be.

• 15 background process adobe in the course of running when I'm NOT using any Adobe application. What are they for?

  System resources are valuable.

  I'm about to disable / stop ALL the Adobe services below.

  But before I do (and probably blow) someone please explain in detail what each of these make Adobe services.

  Certainly, some of them are explicit as Adobe Acrobat Update Service but

  Why must he be running all the time?

  Why is there a service update separate for Acrobat as other Adobe products?

  Why must he be running when I'm not nothing install Adobe Installer.exe?

  What is Evented i/o for V8 Javascript service?

  If I don't use all of the creative Cloud Sync features why must he be executed?

  What does Adobe CPI broker?

  What does Adobe CEF Helper?

  Name	Process name
  AcroTray (32 bit)	acrotray.exe
  Adobe Acrobat update service	armsvc.exe
  Adobe CEF Helper (32 bit)	Adobe CEF Helper.exe
  Adobe CEF Helper (32 bit)	Adobe CEF Helper.exe
  Adobe Creative Cloud (32 bit)	Creative Cloud.exe
  Installation of Adobe (32-bit)	Adobe Installer.exe
  Broker CIB Adobe	AdobeIPCBroker.exe
  Adobe update service	AdobeUpdateService.exe
  Adobe software true integrity service	AGSService.exe
  CCLibraries	CCLibrary.exe
  CCXProcess	CCXProcess.exe
  CoreSync	CoreSync.exe
  Creative cloud	Service.exe Office Adobe
  Evented i/o for V8 JavaScript (32 bit)	node.exe
  Evented i/o for V8 JavaScript (32 bit)	node.exe

  Thanks for your help.

  Installation of Adobe's reference there is Adobe app installation process is running or Adobe Application Manager / CC app made some installation associated with trial.

  Adobe update service is for the verification of the last the updates available for automatically installed Adobe applications.

  Once you creative process Cloud, Adobe CEF for assistance shud usually disappear. The fact CoreSync.

  Broker CIB Adobe runs in the background when creative cloud is running.

  If you don't use a synchronization, you can disable it since Adobe Creative Cloud app.

  Real health service Adobe Apps of the license validation purposes.

  Evented i/o for V8 JavaScript runtime engine - Javascript. Best explained in link below:

  Is evented i/o for V8 JavaScript, safe?

• 2015 compose window is not updated when rendering

  My composition window is not updated when rendering, there's just some framework I was on when I go to the render queue. Is it a 'new '? It's like having caps lock in previous versions. Anyone else seeing this? (or not, somehow...)

  8.1 to win

  AE 13.5.1

  It of a frustrating problem, isn't it? It's not fair you well. It's all about CC 2015. Why? Well, After Effects is going through a HUGE architectural change and they are virtually all rewrite. CC 2015 is the first step that promise and and while it got some promising improvements and reeks of the future, not everything has been incorporated yet to make far CC 2014 was. Notice, multiprocessing has also disappeared. This page explains more: features not available in after effects CC 2015 (13.5). After the effects of interest area

  I use CC 2015 to make my work more vivid interface, better management of the expression, etc. and then use CC 2014 to make my render with multiprocessing and be able to see, while it's happening. You can open the same project file in each version (because they are 13-13 and 2 13.5 specifically versions) so it is pretty hassle free.

• Paramerterized interactive reports - is there a quick fix to stop the query to run when the page is entered before user by clicking OK.

  Example of

  Currently, when the user enters the page interactive report runs (unless the user hitting ' go') and - does no data found because one "parameterized" field is required and the sql is not set to NULL values.

  I'm looking for a way to not run a query at all -until the user hits go for the first time on the page - each time that they re - enter the page in the same session, it would be OK to auto submit the query.

  I believe that I can install a hidden item and check on my interactive report E1 not null.  Then create a 'calculation' on 'after bid"that would set this value to a value - say 1.

  I can't seem to be able to get this to work however.

  In my interactive report - I wonder what 'type condition' should I use.  Any thoughts would be greatly appreciated.

  You have two regions, research and order Type. You have items in the two regions. However, I think you are talking about the area "Search" when you say 2 parameters.

  If you want to just display IR when the user clicks on 'Go' or click on 'Go' earlier in the same session, then I suggest,

  • Create a new item of the hidden page, P6_SHOW_IR
  • Create page process that runs when the user clicks on the button 'Go '. Here to update the value of P6_SHOW_IR 'Y '.
  • Create a branch that connects to the same page with "State of Session saving" checked (connections conditional, when click on the button "Go")
  • Set "Conditions" for the region of infrared, so it displays only when the value of the P6_SHOW_IR element is Y

  Kind regards

  Hari

• First Pro CC speedchange when rendering effects

  Why first Pro CC continue to change the speed of my clips when I make it? But only those that have effects on them as self-colour etc.

  Images of 720 p 120 fps just a GoPro Hero 3 Black Edition.

  If I add an effect to an element when rendering PP reduced the fps from 120 to 25 so that the actual speed is about one-fifth of what I wanted, but with the same duration. If I speed it up manually after shortens the duration, and I'm not allowed to extend the clip below that which was rendered.

  I have no problem with a low framerate, as in the end it will be still rendered 25 images per second, but I do not understand why the PP is the speedchange instead of calculating it down.

  Maybe the answer is quite simple, but I have really no idea.

  I don't know why, but he has been linked with parameters of 25 images per second in the options of the sequence, with 30 frames per second, it works without any problem.

• JavaScript in "Run when the page loads", works not when paginating the results grid

  I have some Javascript in a page of the Apex, running in "run when the page loads. There is stuff to a grid of results. It works fine on the loading of the page, but then does not work when I paginate (Browse), or sort the grid. I assume that this is because the grid is sorted / paged using Ajax, which means that the page is not fully loaded.

  Is there anywhere else I can put the code, so it is applied to the grid on the kinds and paging?

  Yes you are right when you paginate it doesn't reload the page (at least in this case).

  You must use the event after Refresh in the dynamic actions and run javascript also, you would probably need the dynamic scope

  17.9 implementation of dynamic Actions

• Manufacturers minimum how will run when we create an object?

  Hi friends,
  Manufacturers minimum how will run when we create an object?
  Thanks in advance.

  >
  Manufacturers minimum how will run when we create an object?
  >
  You can answer this question yourself by answering this question
  >
  If you create a new class and don't provide your own constructors constructor how this class has?

• AE is fast while work, slow when rendering...?

  Hello

  I have a strange problem with CS5.5 AE I guess.

  When you are working, everything is super fast. RAM previews are very fast, all right. But when I returned, he gets brutally slow.

  For example, I just had a small Animation with some blur, brightness and exposure, nothing great. in AE, I needed about 30secs for a ("Full") RAM Preview, but when rendered, it takes 10-15 Minutes. It of really strange, isn't it?

  I have a Dual Xeon system with 16cores and 24 GB of RAM; I use 12 hearts for the rendering, 0, 75 GB/piece. Windows 7 x 64 is my OS

  Does anyone know how perhaps tweak it right?

  Looks like you're likely starving your hearts of RAM, which is in turn slows ther make. Each kernel should have 2 GB of RAM for background processing. You are allocating. 75 GB a lot too little. Either try to disable "Made simultaneous multiple images", or increase the allocated RAM / Core, or decrease the number of cores used and adjust the distribution of the RAM as a result.

  Can the BUS network was important if you do a lot of reading/writing on the wire of the main and important of compression/decompression sizes. Ditto for the speed of the drive, however, I don't think one of these is the culprit. I think it's your memory settings.