Send quiz results

Similar Questions

• The course does not send the results of the tests and reports system (Saba) after trial. The course remained "incomplete". What can you recommend?

  The course does not send the results of the tests and reports system (Saba) after trial. The course remained "incomplete". What can you recommend?

  Ok.  So you're screenshot compared to SCORM clouds now shows you're scoring 100% in the quiz, but your state of completion will still come out incomplete.  Then of course, your quiz notification settings not award success based on passing the test.

  Try to set your quiz the way I show this screenshot using SCORM 1.2 instead of 2004.

  

• Send quiz LMS data

  Hello

  In CP4, is it possible to send the results of the quiz at the end of the project? I am runing is, I have three slides that run when the quiz is completed but it seams while the quiz sends data to the lms, the project continues to go and then mess up voice over and slides the calendar, at some point, I have two voices of slides at the same time.

  Mike

  There is another model, you can use:

  http://blogs.Adobe.com/Captivate/2011/04/a-new-way-to-report-scores-to-the-LMS-from-your-c aptivate - courses.html

• Problems emailing quiz results

  I am trying to send email quiz results - he does that very well at the end of the quiz, but it sends also a set of "fail" stats on most of the blades, so the person who takes the quiz ends with a pile of e-mail to send messages! I tried different variations of settings in the Quiz Manager, I also tried selecting buttons on the relevant screens and under properties saying I don't want the results of this screen... but I still get them.
  
  I do something really stupid, and is there an easy answer to this?
  
  Any help gratefully received!

  There is a problem with Captivate 2 in this area - the solution seems to lie in the e-learning forum in a thread called 'Report - Email problem' has started on 19/02/2007. I'll go off and try it...!

• Quiz results slide - NaN errors in published Captivate 8 content

  Hello

  I worked on a number of modules with different content in each, which have a short quiz at the end. All except a beautiful work and the quiz results slide displayed correctly the 'score' and 'max' accordingly.

  However, I have a module with an erroneous result reported "0" out of "NaN" and I don't know why it appeared suddenly?

  I have been a model for these modules (even if it is true that it has been outsourced - they should always use the same model)

  I don't see any obvious difference in the parameters or results between this slide and the other modules - so I'm stuck!

  I was wondering if something had gone wrong with the slide therefore results as a test, I copied all the slides except the quiz in a separate model that has worked very well, and then updated the quiz and slides re-edited, still had the same error. This leads me to suspect the content slides are part of the problem. There are some real questions in the content slides / false, which are defined as a "pre-test" type - could these affect something?

  I am using Captivate 8.0.3.290 and I checked the result published scorm cloud and our Moodle LMS - same erroneous result.

  I hope someone can help?

  Thank you

  Jon

  It is difficult to know what is the problem with this model. I highly doubt that the presence of pre-test slides is the cause. It is perfectly possible to have a pre-test and a Final Quiz in a project. To exclude this possibility: try to create a small project with a test question and a real Question slide, using this same model.  Follow the system variable. What is the result?

  You know if this model was created initially to CP8 or is this a version update of a model?

  I never delete the review area, although it is used in two circumstances:

  1. For the message of pass/fail on the Score slide
  2. When a question has been ignored (I always feel that issues are considered to be ignored).

• Captivate 9, quiz results not updated

  I inserted a few slides of question and deleted some. When I run the project on the Quiz results page only shows 2 of 2. I have 9 question slides.  How can I update the Quiz results slide?

  I'm running Windows 10, IE 11.

  Thanks in advance.

  Roberta

  This is not normal. Can you check Panel Advanced Interaction (F9)? You see questions added to the score he and the correct total score? Are you sure you did insert normal question slides, no check sliding knowledge?

• Object styles where I can change the Quiz result messages fonts of Captivate

  In Captivate (9), I can change the quiz result messages in Quiz preferences

  But where I can change the font and color?

  Have you looked at a lot of different things in the Style of the object manager, but just can't find these messages...

  Colors and fonts are the style of the default revision box.

• Custom Quiz results page mapped for quiz interaction question IDs

  We use 9 Captivate and we want to create a quiz results page customized with five categories (each question in the quiz is tagged with 1-5 interaction IDs) each question in the module will have the points assigned to one of five categories. Each question will be worth 10 points. Each question uses an integrated in multiple choice or reactive quiz question slide. We want the results to calculate and display screen the score of the learner in each category. Thus, for example, if there are three questions in class 1 and I get two right, we want that results screen to view it: category 01:20 / 30.

  In short, we want to create five numeric variables. Each question will be assigned to a variable. Each correct answer should add 10 to the numeric variable. The results screen should display a count of five numeric variables.

  How can we do this? Please help :)

  In this case, you have the second approach. Create 5 user variables v_cat1, v_cat2... v_cat5 with a default value of 0. Create a shared action that you can attach to the success events and failure of the glide of the question. It will be something like this (didn't try, little busy at the moment):

  • Expression v_cat1 = v_cat1 + cpQuizInfoLastSlidePointScored
  • Go to the next slide

  Only the v_cat1 variable must be a parameter. When you apply this action to both events of a question, you only have to indicate the correct variable.

  On your score slide, insert this user variable in a text container.

  You want to have the maximum calculated also? Then you will need 5 user additional variables v_max1, v_max2... v_max5. Add an order more to your shared action:

  • Expression v_max1 = v_max1 + cpQuizInfoPointsPerQuestionSlide

  This means that now two parameters (variables two user).

  Good luck!

• Displays a button on the quiz results slide

  Use 6 Captivate, I show a "print" on the quiz results slide key only if the user passes the quiz. I tried setting the action in the Quiz > success or failure of the settings to display the button (with a tip action) passed the test but still no luck. On the results for the "print" key slide, I disabled the 'Visible output. Any ideas?

  You can download a complete list with the system variables of: System variables in Captivate 8 - Captivate blog

  The variable system quiz, you will need to use a conditional action is cpQuizInfoPassFail, which is a Boolean value, cannot have two values 1 or 0 (failure) (past).

  Use the event to enter the Score slide to trigger a conditional, tip action

  IF cpQuizInfoPassFail is equal to 1

  See the Bt_Print

  Continue

  ON THE OTHER

  Continue

• Adobe Captivate Quiz results Analyzer

  It is still available for the 8 version of Captivate?

  Hello

  Yes, Adobe Captivate Quiz results Analyzer version 8 comes with 8 Captivate used to analyze the results of course captivate in a better and organized way.

  Kind regards

  Ajit

• Captivate 8 customize quiz results message

  Hello

  I was given a Captivate file and I need to translate everything for the French. I translated everything, with the exception of a single message on the results of the quiz screen. When the user fails there is a message that displays "Sorry, you failed the quiz" and I need to translate it. I looked everywhere but can't seem to find where to update this message, including under the menu Preferences of Quiz.

  How can I change this sentence? What is a variable that controls the message here?

  Thanks in advance.

  Try the Quiz preferences, settings, Quiz results Messages

  

• Why are displayed in preview mode, but not to publish the text slide Quiz results?

  The last slide in the project is the standard Quiz results slide. I would like to add a message at the bottom of the slide that says: "Congratulations!" You have completed this training! "When I inserted a text caption with the message, it appeared in mode, overview; However, it does not appear when I published the project. So I tried to insert as a smartshape with added text, but he got the same result.

  Any thoughts on what I am doing wrong?

  Note also that the Question slides have a suspension point. You must make sure that the object appears before the point of interruption.

  See you soon... Rick

• Continue the Quiz results button does not.

  On the Quiz results page, if someone clicks on the button continue, there is no little matter of success or failure.  I have these settings:

  

  55 and 44 slides exist.  Any ideas?

  What framework do you have for Quiz > settings > required combo?  It could be the cause of the issue.  If this option is not set to optional, try and repost to see if the continue button then works.

• Help! Lesson with 2 branches of locking on the Quiz results screen when the learner (branch or another) fails.

  I have a lesson CP6, which is essentially two parallel branches, with only the following slides in common:

  • A slide 'welcome. '
  • A slide where the learner chooses its branch
  • A "Congratulations!"  "Slide you completed the test.
  • A slide "you not answered the questions correctly.

  Once the learner chooses its branch, it is given a 5 question test.   If he fails the exam, he is taken to a short lesson, specific to the content tested in this branch.   When he finished the lesson, he is returned to the test to try again.  If it fails, come back to the lesson, then back to the review, etc.  until it passes.  (I put max '10' under 'Préférences Quiz' tent)   When he passes, he is taken to the "Congratulations" slide and the end of the lesson.

  I put the last question in each branch to go to slide Quiz results (success or failure), and I put the Quiz preferences to access the slide of "Congratulations" so passing and for the "you not answered the questions correctly" drag if the learner does not.

  That's how it is supposed to work anyway.  And that's how it worked until I made a change somewhere and he mucked things.

  What happens is instead:

  • Testing (both branches) learner outcomes Quiz and 'Congratulations' slide takes very well.
  • Lack of test (or another branch) brings the learner to Quiz results and then gets stuck there.    (In fact, if I click on the "Continue" button a second time on the QR slide, the lesson does not always advance but disappear all the graphics, that I put on this slide, which is weird and not at all useful.)

  Branching seems ok for me.   What Miss me?

  

  I know I have to improve and we will be soon, but not before this lesson must be published - which is, of course, yesterday.

  Help?  Anyone?

  Figured it out.  A "required" on the page "Quiz: settings" value "necessary Pass - the user must pass the quiz to continue."  Who kept the learner continued beyond the "results of the Quiz" slide and a loop to the didactic content and taking the quiz.

  I changed "Required" "Required – the user must take the quiz to continue."   The learner is able to loop back/reading/retest as many times as necessary in order to pass the test.  All right.

• Quiz results - Execute Script of Action on tip with conditional

  There's something I'm missing, I'm sure and hope someone can help.

  I have a quiz when entering the results of the exercise, I want if overpass / equal to 80%, continue to a page of the certificate; Otherwise, display a table of contents and allow a user to review content.  The Table of contents gets stuck on the Quiz results page, however.  Not sure if it's my settings as I am new at condition variables, or if it's something else.

  Hoping someone can help.

  Here is my if and actions

  

  Here's the other

  

  Post edited by: Tom Robb

  Hello

  You use the wrong system variable. See the list: http://blog.lilybiri.com/system-variables-in-captivate-6

  Change it to cpInfoPercentage, this is what contains the percentage scored.

  Lilybiri