Invalid drive: Z:\

Similar Questions

• Satellite L350 - error DVD Recovery "invalid drive".

  Hi all
  I'm trying to restore my system with the recovery system 2 DVD (made with the utility).
  Everything's fine until it fails at this point:

  -------
  Copy the files from the recovery database
  -------
  The volume of your selected is not valid or does not exist.
  There is no volume selected.
  HTMPREP...
  Invalid drive specification
  ERROR: File recovery database copy failed!

  Any help please? So far I can't do anything that everything has been cleared...
  Thank you.

  Hello

  Format the HARD drive and try to restore the system using the disk recovery once more.
  If this does not work, then several reasons could be responsible for this problem.

  (1) the recovery discs are corrupted, or not created properly
  (2) the HARD drive or partition is may be defective

  If reocvery discs are defective, then you can order a new one by clicking here:
  http://backupmedia.Toshiba.EU/landing.aspx

  in case two, replace the HARD drive...

• Error 1327 on installation of c309g photosmart printer - "invalid drive c:\.

  Am running Windows XP SP3 and the printer is connected via a wired router

  Have recently changed my HARD drive and reinstalled windows etc., original HARD disk is functional but not connected

  Original letter from HARD drive is c: new HARD drive partitioned into I: J: & K:, with windows, etc. on K:

  After the installation of windows on the new drive, original HARD C:\ drive was briefly re-established as slave to recover the 'Favorites' folder and then broke

  When installing printer CD, all right until the error message "drive not valid error 1327 C:\ - go to the web support etc.»

  Printing software seems to completely uninstall and requires a re-boot, but there are still a lot of HP entries in the registry

  Went pages support web and found the error message that seemed to relate more to a mistake of the drive letter of the CD than the HARD drive but followed steps, copy the disc in the HARD drive, download the full drivers etc Web but every time got exactly the same message

  Final solution should contact the support technician to correct the registry entries, but this seems to cost £21 so eager to find a solution elsewhere

  Can someone please?

  Hello sidsilver

  The problem is that there is a problem with the the drive letters on your computer. Microsoft suggests that you change the system for anything other than C:\ drive because many Windows programs refer to specific drive letters. It is part of the reason that the system drive can not have his letter changed without reinstalling the operating system. Change, add, or remove a drive (windows.microsoft.com) Letter

  At this point, the best solution would be to re - install Windows on the computer and install it on the C:\ drive/partition.

  However, before you reinstall Windows try the following:

  1. Open the command prompt
  2. type: "subst C: K:\. "without the quotes and press to enter.
  3. Restart and try to reinstall again.

  OfficeJet Pro 8500 wireless Error Message Invalid drive F:.

• Error 1327. Invalid drive: D:\

  Hi, when I run the update for Microsoft Office Outlook 2003 Junk Email Filter I get an error 1327. Invalid drive: D:\ messsage.  My OS is Vista. Download address is http://www.microsoft.com/downloads/thankyou.aspx?familyId=ebbd7da0-08b8-4c60-8167-e4534e11040a&displayLang=en. Any suggestions?

  Hello Hellomynameistim,

  To resolve this problem, we changed "LocalCacheDrive" registry entry to a valid letter of drive C to D.

  Registry path: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\11.0\Delivery
  
  {Note:- drive letter C--> is the default location of the program files on the C: drive.} }

  I hope this helps.

  [If this post can help solve your problem, click on the button 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  --

• What does the message "Error Invalid Drive / / E ' means. It happens whenever I am trying to install a program

  I'm tinstall Imesh I downloaded direcrtly frm the imesh website (without third party involved), and it uses the installation wizard for my, so once I open the exe file. drop this idwnloaded of imesh, it begins to extract the files using the WIZARD AND THEN A MESSAQGE BOX POP UP BEARING M, E of INSTALL THE PROGRAM AND THE MESSAGE SAYS INVALID DRIVE E.  I don't HAVE A DRIVE E, so IS IT some THING MY MICRSFT WINDOWS IS TELLING ME or IS IT SOMETHING I MESH IS LOOKING FOR? do not REALLY UNDERSTAND THE error CODE, please someone HELP me WITH WHAT YOU KNOW ABOUT it?  Thank YU IN PROGRESS

  Hello
  • What version of Windows are you using?
  • How long have you been faced with this problem?
  • What were the changes made before the show?
  • What is the full error message that you receive?

  I recommend the clean boot and try to install in clean boot state.
   
  Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• I tried to download for kb973636 auto update and got an error code 646, then I've done a manual download and got an error code 1327 showing invalid drive: o:\ location, how can I change the drive to c:\ drive.

  I had trouble to download the kb973636 update as it failed and I got the error code 646.  So I did a manual download to computer and got the error code 1327 telling me I have invalid drive o:\ and not c:\ drive somewhere.  How can I fix it and it will not happen in the future?    Ronald E Fish

  Hi captainron57,
   
  Welcome to Microsoft answers community forum!
   
  You can follow these links for a detailed resolution:
   
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/4a971145-86ca-4B80-A545-93a36536d690
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/6e716883-7af4-4A9F-8665-2f4dd57eee8d

  Post back with the State of the question, for additional help or even if the issue is resolved.

  Hope this information helped!

  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Impossible to uninstall several programs in Control Panel. Error 1327: Invalid Drive.

  Using "Add/Remove Programs" in Control Panel, I'm trying to uninstall several programs from my portable computer and everyone gets massage "Error 1327.Invalid Drive E:\. I click 'OK' and receive another message: «Fatal error during installation»

  My laptop was connected to a network and I used an external backup drive; is no longer connected to one, but could be.

  original title: Error 1327. Invalid drive: E:\__

  Hi Tuxedocat,

  Thanks for posting. Please, try the following.

  Press start, run and type Regedit

  Find the following folders from the shell of the Explorer\User HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\

  In the pane right - see if there are any entries which has a F or all other letters in addition C (your OS folder) change data of C:\

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I get the message error 1327.invalid drive: M:------tries to install a nuance product

  I try to install dragon naturally speaking and I get the message, Error 1327.invalid drive: M:------.

  How can I fix it

  Hello

  You can try these:

  a. log on as an administrator or as a member of the Administrators group.

  b. Click Start, click Control Panel and then click on performance and Maintenance.

  c. click on Administrative Tools, double-click computer management and then click Disk Management in the left pane.

  d. right-click on the CD ROM drive and click change drive letter and paths.

  e. click the button modify and change the drive to K and then click Ok.

  f. click Yes to confirm.

  g. install Dragon Naturally speaking

  See also: http://nuance.custhelp.com/app/answers/detail/a_id/5720

• Windows updates fails, get "Error 1327 Invalid Drive/M" error when trying to install updates by using the stand-alone packages.

  Original title: I deleted the files from automatic update and windows update keeps trying to install

  I've done an update for a long time on an old computer unused spare XP and Windows Update said that he had to update a large number of files, so I have left to download and install.  Once the 45 updates completed, I rebooted as instructed and proceeded to clean a lot of old data.  Apparently I deleted (7) files for Office M/S that must be installed, because the Winows Update icon in the status bar telling me I had 7 sto update to install.

  Now Win Update always tells me that the files should be updated and starts the process, telling me that they are already downloaded, but it fails every time because they are not where they should be, as I deleted them without meaning to.  How can I do the update for these startup files, or where can I get the appropriate files to allow the update work properly?

  Yes, I know it was stupid, but this is the frist time that I asked for help from Windows 3.1, so I don't feel too bad.

  I have download the individual Ko * .exe files support, but get an error 1327 Invalid drive / M error whenever I try to install one of them.

  Thank you

  Paul

  You receive an "Error 80070643" error message when you try to update Office 2003 by using Software Update Services
  http://support.Microsoft.com/kb/903772

  Have you ever used registry cleaners?

  Notes in my old an assignment by Peter Foldes (long ago)-

  '0 x 80070643 error '.

  Use the following fix below. Please post back with results

  subkeys to rename 1 Office

  Note: Remove the following registry keys may reset customized user
  settings for your Microsoft Office programs.

  1. close all applications.
  2. click on start-> run, type regedit, and click OK.
  3. Locate and select the following registry subkeys:

  HKEY_CURRENT_USER\Software\Microsoft\Office\11.0
  HKEY_LOCAL_MACHINE\Software\Microsoft\Office\11.0

  4. right click on 11.0 and rename them in Old11.
  5. close the registry editor.

  2. detect and repair Office 2003

  1. on the Windows taskbar, click Start, point and click Control Panel.
  2. double-click on Add/Remove programs.
  3. click on change/remove programs in the left pane.
  4. Select Microsoft Office Professional Edition 2003 in the right pane, and then click on edit.
  5. Insert the correct CD version when she needs.
  6. Select "Reinstall and repair" and click Next.
  7. Select "detect and repair errors in my Office installation".
  8. click on install and wait for the process to end.

  3. install the updates
  --
  Peter '.

• Fatal Setup error code1327 E invalid drive error

  Hi, I uninstall the printer from my computer, everytime I needed to print a shhet of the document it was printing different 34 of something else I've had enough of him. Now try to install the software I have uninstall it in the first place. It promt "fatal error facility code error: 1327 invalid drive E then it showes me web site for me to research, 'fatal error' and"MSI '." selfinstallingportmonitor.  No idea what this means and can not find the problem. Please help thanks

  Hello

  Try the steps below and check if the problem persists.

  (a) click Start

  (b) select run

  (c) type Regedit

  (d) find the following registry key

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\ Explorer\User Shell Folders

  e) in the pane right - see if there are any entries which has a F or any other correspondence in addition C (your OS folder) change the data of C:\

  Note:
  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

• Error 1327 Invalid drive: me received when trying to install Avery Design Pro

  How can I install Avery DesignPro on Windows XP without receiving the error 1327 Invalid drive: me?

  1. Back up the registry first.
  2. Click Startand then click run.
  3. In the Open box, type regedit, and then click OK.
  4. In the registry editor, find the following registry key:
     HKEY_CURRENT_USER folders
  5. In the right pane, note the values in the field data for each entry. If a value contains a drive that is not correct for your computer, right click the entry, type c:\my documents in the data value box and then click OK.
  6. Repeat step 4 for each entry whose Data value contains an incorrect drive.
  7. Repeat the steps 3 to 5 for each of the registry keys:
     • HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
     • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion
     • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell folders
     • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
  8. Close the registry editor.
  9. Install Office 2000.

• e invalid drive when you try to install software.

  trying to install a soft ware cd player but error message appear and invalid drive

  Hello

  1. what software are you trying to install?

  Follow the steps below and check them off if they help.

  Registry warning
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  a. Click Start and then click Run.
  (b) in the Open box, type regedit and then click OK.
  c. in the registry editor, find the following registry key:

  HKEY_CURRENT_USER folders

  d. in the right pane, note the values in the data field of each entry. If a value contains a drive that is not correct for your computer, right click the entry, type c:\my documents in the value data box, and then click OK.

  Repeat step d for each entry whose Data value contains an incorrect drive.

  Repeat steps c through e for each of the following registry keys:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell folders
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders

  e. close the registry editor.

• Error 1327 Invalid drive: message E\?

  During the attempt to re - install my printer PSC to my HP Pavilion 305 w with Windows XP, I got the error 1327. Invalid drive: Message E. What can I do?  Thank you.

  Hi CarlaBrowning,
   
  Here's a similar post on this issue. Check the answer given by "Shawn - Support Engineer" and follow the steps proposed by him to solve this problem.
   

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the windows below support article.

  How to back up and restore the registry in Windows

  Error 1327. Invalid drive: E:\__

• Receive error 1327.Invalid Drive: H:\ installing Pinnacle Studio 14 download. __

  Receive error 1327.Invalid Drive: H:\ installing Pinnacle Studio 14 download. I have Pinnacle Studio 12 installed. Pinnacle response: you receive the error message is not an error of Studio, but a Microsoft error message. This problem may occur if a registry key contains an incorrect value in a data field. The best thing to do in this case is to contact Microsoft and they should provide a solution for this error: www.microsoft.com.  I found where this issue occurred with some Microsoft products, installation, but do not know how to fix once I get into the registry editing.

  Can someone help me please?

  Hello kthatgms,

  Click the number of the KB article to bring up the following article.
  KB Article ID: 327763 -you receive an "Error 1327. Invalid drive"error message when you try to install Office 2000

  He mentions Office but it should be the same for any program that you are trying to install.

  Please reply back and let us know if this can help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Invalid Drive F:\ error during installation and removal of Nero 7 Essentials

  I installed Nero 7 Essentials on my computer about 2 years ago and then uninstalled. Recently, I tried to install it again and has encountered an Invalid Drive F:\ error with a fatal error during installation. All I want to do now is to remove Nero 7 from my computer; but I get an error Invalid Drive F:\ and cannot. Help, please.

  Hi JKoZZ,

  1. what the F drive on the computer?

  I suggest to use the Nero 7 clean tool available in the Web Nero site using the link below and check if it helps.

  http://www.Nero.com/enu/support-Nero7-tools-utilities.html

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.