Send / receive channel of tcp/ip

Similar Questions

• Always send/receive texts even if my data is turned off (and I am not connected to wifi)?

  I'll be getting an iPhone 6 s at the end of next month. 64 GB with 3 concert data (it's cheaper for me to upgrade and stay on the plan from my parents as it is for me to make my own plan). In terms of my parents, I already have a plan of SMS and minutes for my current phone (a cursor). The 6s be my first official smartphone. There is already a plan of texting in place, and the extra thing only reason I pay is the data plan.

  But I was just wondering (and I know it's a stupid question)... can I still send/receive text messages as I would with a smartphone not (and make calls and others), even if I have my data off AND I am NOT connected to wifi?

  Yes.

  SMS text messages using your cellular operator's voice communication channels.  They do not use the data.

  However, if you use iMessage, who would use the data.  So keep that off.

• Thunderbird is no longer able to connect to internet (sending/receiving e-mail, update, creating a new account... Firefox connects fine

  24.4.0 version worked fine until yesterday (2014-04-06) running windows 8.1 and all of a sudden he couldn't connetc to the internet (sending/receiving e-mail, update, create a new account...). No change was made on my set up accounts. Other applications to connect correctly to the internet. Some Windows 8.1 updates are automatically applied during the same period (?).
  Any suggestion would be appreciated
  Rgds

  Hi the problem is resolved. I saw a small logo on the first login of Windows 8 window saying "no internet connection available. I connect to the internet before opening a Windows session, and after the opening of the session windows my Thunderbird work again as well as the update of ccleaner...
  It seems that, for this Windows 8.1, there are 2 types of internet connections... Mystery?

• How to customize the status bar, to see the send/receive status bar

  I have TB 24.4.0 on computers both Win 7 and Win Vista.
  On the installation of Win 7, I can (usually *) see email send/receive progress in the lower-left corner of the status bar (for example "Inbox to check for new messages", then POP3 for my various accounts etc.). I also see a green progress downstairs bar right when messages are sent or received. On this one, I also see the number of messages in each folder, extreme right (no read: # and Total: #).
  On the installation of Vista, numbers no read and Total are below on the left, but when I send and receive my email, there is no similar progress message (and no indication that the send/receive is actually at work, unless I get a new email).
  I would like to be able see the two send/receive status and the progress bar send/receive in the status bar. How can I do this? No read/Total numbers lower-left (instead of at the bottom right) block this?
  (* As in the past, even on my Win 7 installation, sometimes send/receive status disappears from the status bar - and I think that in this case no read/Total numbers to the left switch - but it didn't happen for a while. Why is it?)
  I can add screenshots if this will help.
  Forward advice or solutions. Thank you.

  See if you have the add on Adblocker Plus installed on the problem system. If so turn it off and restart Thunderbird. This add on is known to cause this problem.

• I have a 6 s with Verizon iPhone. Can I send/receive calls (using this service and calls on other devices functionality) on my iPhone 5s, who was with AT & T service, but has no service now since I switched to Verizon?

  I have a 6 s with Verizon iPhone. Can I send/receive calls (using this service and calls on other devices functionality) on my iPhone 5s, who was with AT & T service, but has no service now since I switched to Verizon?

  Note: I'm able to get two phones to ring with an incoming call, but the 5s consist not out. Whenever I dial a number, it says call failed.

  Do not dial a number. Try to choose a contact in the contacts App and tapping on telephone button.

  That said, I don't think that outgoing calls work on continuity since another iPhone. given that the iphone is designed to make calls through its own service.

  Document to support that you just did not mention calls from a secondary iPhone at all, it points to Mac, iPad and iPod touch, which leads me to believe that it won't work.

  It runs from devices such as iPads and Macs, who have no other way to place a cell call.

• problems with sending/receiving messages

  For the last two weeks my iphone 6 s and my son 6 more have had problems with sending/receiving messages in the texts of the Group and regularly comes to a voicemail.  Messages are not at all or you may be able to receive them. Then last night on a group text between me and another user of iphone and a droid user messages were not all going through and an 'unknown' appeared on the screen of the droid users as if this person has attempted to send a message to our group text but nothing was there.  Iphone users could not see it.  This morning - messages still does not go through the text of the group or on one.  Any ideas?

  SMS texts are a function of carrier

  Control an upgrade of the carrier

  If the droid user used an iPhone before having them their registration number

  Also check with support carrier technique

• Dynadock U3 - Ethernet does not - send/receive flashing every 3 seconds

  My wife uses a Dynadock with a spectrum of XP.
  Ethernet worked fine when I first put in place, but I just noticed the wired connection does not work (only works with wireless).

  Send & receive lights on n/w Dynadock port flash every ~ 3 seconds, the Windows port & alternate state between Enabled & cable disconnected.

  Not sure how long the wired connection has not worked, but my scale did spend a couple of months to Win 8.1. At the time I had upgrade the drivers to get the video via the Dynabook work. I checked & Win network drivers have been also upgraded in this framework.

  Have seen a few other posts on uninstalling/reinstalling the drivers (done) & case where the icon network in the device driver has a warning '?' (says "device is working properly" in my case).

  Recommendations, or suggestions for a further diagnosis?

  Hello
  In my view, the question appears due to the update system 8.1 Win.
  You will need configure the network in the network adapter properties:
  To connect to the network via an Ethernet network cable, connect one end of a network
  cable to the Ethernet (RJ-45) the dynadock port and the other end to your network for the great
  performance of network access.

  To set the properties of the network to the Ethernet adapter:
  8.1 Windows, move the mouse pointer and click the icon at the bottom left of the screen to go to the
  Apps for display and then click on Control Panel-> network and Internet-> tasks-> change map settings and display the status of network.

  In the network connections folder, double-click the icon of the s dynadock Ethernet adapter connection.
  which is indicated by dynadock Ethernet. This will open the local area network connection properties window for you
  Configure network settings as required depending on your network environment.

  Note: The icon to connect to the Local network in the system tray/Notification area does not show a connection. Open network connections to display the Ethernet connection.

  I also found another thread on the same topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=70771

• I can't send / receive text Messages on my phone my husband track 6s iphone

  I can't send / receive text Messages on my phone my husband track 6s iphone.

  Contact your operator. SMS and MMS messaging are characteristic of the carrier.

• missing number of iPhone on iPad send / receive

  My conversations SMS do not appear on my iPad and iPhone. When I go into settings > send / receive on my new iPad, my iPhone number does not appear. Why?

  On your iPhone, go to settings > Messages > text Message transfer and make sure your iPad is turned on.

• Satellite A200-1A 9: problem with sending/receiving e-mail using Windows Mail

  Use Windows mail, I have to open/close the program to be able to send emails, they are entangled in the Outbox. By closing and reopening the program, mail is sent. Also the blue figure 1, supports showning 1 mail unread in the Outbox is there all the time, although there is no read or unread emails in the Outbox

  Not a problem server as all mails are go/very good reception on my desk.

  Pressing on send and receive button does not help. Although from time to time on what it will receive emails when you press send/receive, but will not send the

  I have Norton Internet security 2007 and getting fed up with the ongoing problems that seems to cause during the period 2004-7.

  Is there a problem with the running with Vista Windows mail program which is known

  I think I found a solution

  Please check this:

  Windows Mail won't send or receive emails
  http://support.toshiba-tro.de/KB0/TSB7701X30005R01.htm

  It seems that the update of the Software Desktop SMS Installer version will help to address this problem.

• How to send / receive files via Wifi Direct... ?

  I found this bike e wifi Direct support. I tried to send files via wifi direct, but I couldn't.

  How to send / receive files with direct wifi without installing any 3rd party application... ?

  Uses of direct wifi... ?

  Sorry about that. Can be a regional thing, I'm not familiar with.

  Back to my question - what types of files you try to move?

• Send/receive VI in LabVIEW to run on SMU...

  Is it possible to write a VI for send/receiver UDP messages that will run on the SMU RT computer?

  Nevermind, I got it. No not specified delivery address.

• Recently went from Outlook Express to Windows Live Mail. Since that time I can't send/receive emails without this message popup Windows live mail ID error 0x800ccc78 Server Error 530.

  Recently went from Outlook Express to Windows Live Mail.  Since that time I can't send/receive emails without this message popup Windows live mail ID error 0x800ccc78 Server Error 530.

  You will need to ask here:

  Windows Live Mail Forum
  http://windowslivehelp.com/forums.aspx?ProductID=15

  And you need to display an error message in its entirety. You can left click on it to highlight then right click to copy and then paste in this thread. Just the number of code alone is not enough.

• When I enter my email password in send/receive email, it is rejected and I can't send.

  Send/receive e-mail password are not except

  When I enter my email password in send/receive e-mail, it is rejected and I can't send it's a new book-net.

  Hello

  1. which e-mail account do you use?

  2. you have any mail client installed on the computer?

  In the case where you use Windows live Hotmail as the e-mail account, then you can post the question on the link provided below for assistance.

  Hotmail Portal

  http://windowslivehelp.com/product.aspx?ProductID=1

• How in outlook express to send & receive emails from my Inbox?

  HOW TO ENTER IN OUTLOOK EXPRESS TO SEND & RECEIVE THE EMAILS & SEND EMAIL? Thank you!

  If you use hotmail, you can use outlook Office connector, which can be downloaded

  HERE