sensation of burning or dull ach after the port I watch

Similar Questions

• Time travel has stopped working after the upgrade to watch OS 3

  Hi all
  Since I upgraded to 3 watch OS stopped working time travel feature - by turning the digital Crown now does nothing.  The digital Crown works fine on the other screens, for example the notifications, but not on the dial of the watch itself.  I did a cycle power, but to no avail. Does anyone have information?

  Thank you
  Ray

  Come on, show on your iPhone in the app, then check the clock settings. There is an option to turn on or off; travel in time after the update to watch OS 3, it has been disabled by default for me.

• Why I do not have a button "nearby", after the upgrade to watch OS 2.2

  Why I do not have a button "nearby", after the upgrade to watch OS 2.2

  If you are referring to the card program, I have this button on my screen.

  

• "error LNK2019: external symbol... pending" after the porting of SDKFilehelper function of CS4 CS3

  The following code runs with Indesign CS4:

  #include "SDKFileHelper.h".

  SDKFileSaveChooser filesaveChooser;

  filesaveChooser.ShowDialog ();

  They do not compile with the SDK of Indesign CS3, I get a unresolved external symbol error LNK2019 for each call to: SDKFileHelper.

  Any suggestions?

  SDKFileHelper.cpp must be physically integrated into the project

• QSI CDRW/DVD SBW-242 won't read DVD or BURN a CD (music CD will PLAY) [AFTER the HD FORMAT and re - install}

  Dell Inspiron5100 WinXP SP3.

  Due to malware, I had to FORMAT my HD and re-install Windows XP OEM disc.  I also reinstalled WIN DVD4 from the OEM disc that came with the laptop.

  Check SYSTEM/DeviceMGR/material indicates a problem with the drive, but: it won't READ a DVD or burn a CD (which she has done before)

  Can't update anything of QSI as they were absorbed by COREL years.  No support available for WINDVD4

  When you try to run WINDVD4 with a DVD in the drive, I get a Popup of WINDVD screen that says:

  CREATE OVERLAY FAILED-Please lower your color depth or screen resolution and try again.  Of course, it worked fine with the reg settings in the past, now Ive tried even lower TWO the RES SCREEN and color at least registered but still does not work

  It WILL play CDs of music (mp3s)

  Found the following material etc.

  Provider: Microsoft Corp.

  File version: 5.1.2600.5512 (xpsp 080413-2108

  Driver date: 01/07/2001

  Driver version: 5.1.2535

  Driver files

  C\windows\system32\DRIVERS\cdrom.sys

  "" "" \DRIVERS\imapi.sys

  «"\DRIVERS\redbook.sys «»

  «"«\system32\ c:\windows\system32\storprop.dll»»»

  I installed and ran but it won't play MICROSOFT 'FIXIT' DVDs just run from WINDVD4 and still does not.

  FIXIT now brings me HERE

  It seems that FORMAT/reinstall has missed something the will allow the CD PLAYER of .1BURN and 2. READ the DVD, but allows you to PLAY CDs

  From: * e-mail address is removed from the privacy *.
  To: * e-mail address is removed from the privacy *.
  Date: Tuesday, May 17, 2011 08:30:29-0700
  Subject: QSI SBW 242 CDRW/DVD not play DVD or BURN a CD (music CD will PLAY) [AFTER the HD FORMAT and re - install}

  Response

  Hello

  1. are you able to read any type of file .doc or .txt of DVD?

  After following all the steps (including the update of the MP9 for Media Player [MP] 11) below

  I can get the drive to DISPLAY all the data from the DVD (Master & Commander 'movie)

  on-screen MP11.  He plays (automatically) the intro (ONLY) from the DVD music (as when you put it in a DVD player, forward to press PLAY) MP11 shows all of the content and all the files on the DVD and SEEMS ready to play, but pressing on PLAY don't either not anything.

  2 , what exactly happens when you try to burn the CD? You get the error message?

  Not nothing... He's here

  3. How do you try to burn CDs?

  MediaPlayer, selection of a track list, made a list of titles, and then click BURN... nothing happens

  4 have you tried to play the DVD content in ? windows media player

  I had not before, but now I have.  Previously it was default to my SELECTION WIN DVD4 as the DVD player (I think I've EVER SEEN the WINDVD format/start page on the front screen - it wasn't the default front DVD player either but don't remember what program PLAYS the DVD, he ' comes of ").  Now, go back and see 1. above for MP11 more details.

  Try to update the drivers of CD-RW/DVD drive and check. Also update the graphics driver.

  I did the entire bottom.

  1. click on Start, click Control Panel, and then double-click System.

  2 click on the hardware tab, and then click Device Manager.
  If you are prompted for an administrator password or for confirmation, type the password, or click continue.

  3 right-click on the CD-RW/DVD drive, and then select set to update driver.

  He asks if I have an OEM driver and / disk... NO.. I run the program through...

  "Hardware update Wiz can not find a better match the software installed"

  4. right click on the graphics card and select Update driver. »

  There is no "graphics card" on the material.  This machine has integrated graphics using a part of the main memory (or other) to run the video section:

  I find:

  AUDIO, VIDEO and GAME controllers (announcement)

  Audio codecs

  Audio drivers

  Legacy video capture device

  Media control devices

  Audio Sigma

  Video codecs

  All this seem normal but above I see YELLOW TWO warnings under 'OTHER DEVICES '.

  ?!  Ethernet controller "drivers for this divide (code28) is not installed.

  ?! VIDEO CONTROLLER (VGA Compatible) I didn't HAVE NO IDEA if THIS if APPLIES OR NOT

  Device type - other devices

  MFG-unknown

  Location PCI bus, device 0, function 0.  "Drivers for this device are not installed, CODE28 to reinstall the driver."

  Has been through the usual (request for drive... Laughing out loud. Impossible to beat")

  See also:

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  http://support.Microsoft.com/kb/321641

  Did yesterday.  It installed/ran "MR. Microsoft Fixit' with the result:

  "Question: media in the CD-RW/DVD drive is not readable" CLICKED top DIFFICULTY... and after computer "worked" on this subject awhile, he says STATUS: fixed.  St ill did not.   MP9 introduced the format of the DVD player but don't seem to read anything other then showing a list:

  UNKNOWN

  Title 1

  Title2

  Title 3 etc., but could not do anything with this list.

  He appeared a box asking if I wanted to update my MP9... sure why not so I shut everything down and uninstalled 9 and installed Media player 11.

  Go BACK to # 1. now once again.  This is where I am.  MP11 shows all DVD data, the chart "the Album/DVD cover, all"titles"on the DVD, AND play the track audio 'intro' DVD but will not actually READ the DVD. "

  So far it's PROGRESS.  We are at a point where it SEEMS at least that we are ready to PLAY and MP can SEE all the info on the DVD.

  I see many people on other sites of the same question: Player does not work after FORMAT operating system and reinstall of WIN (and in my case: WinXP SP3 and WIN DVD4 of OEM disc)

  Thanks a lot for your help so far... I hope that we can get to the next step and get the reader of CD-RW/DVD on 'PLAY '.

• In Windows Media Player, my light "Start burn" would not light after dragging the songs on my playlist

  In Windows Media Player, my light "Start burn" would not light after dragging the songs on my playlist, he said only "Connect burner and restart". I have already burned a music CD "RW", why he said burner "connect"? The burner is already installed? I tried the "Device Manager" thing wasn't working, thank you for your help. "

  Hello

  1. have you installed any third-party DVD burning software on the computer?
  2. could you give us the exact error message?

  Method 1.
  If you have installed a third-party software CD burning remove it and then try to burn the disc and check. Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Method 2.
  a. Click Start and type cmd into the search bar and press ENTER.
  b. in the type guest following command press ENTER.
     WMP.dll regsvr32.exe.
  c. close the command prompt and start Windows Media Player and check.

  Method 3.

  You can re-create the database of Windows Media Player and see if that fixes the problem.

  Stage i: To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:

  a. exit Windows Media Player.
  b. Click Start, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.
  c. Select all files in the folder and then click on Delete on the file menu.
  Note: You don't have to remove the folders that are in this folder.
  d. restart Windows Media Player.
  Note Windows Media Player automatically rebuilds the database.

  Stage II: If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  a. exit Windows Media Player.
  b. Click Start, type % LOCALAPPDATA%\Microsoft and then click OK.
  c. Select the Media Player folder, and then click on Delete on the file menu.
  d. restart Windows Media Player.
  Note Windows Media Player automatically rebuilds the database.

  I hope this helps.

• My CD/DVD drive no longer works after installing an update for Roxio Burn, (it was working perfectly until after the update).

  Hi, my CD/DVD drive has stopped working after I installed an update for Roxio Burn. I tried uninstalling and reinstalling, updating all windows and my device driver programs, but I just comes up with one, "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ', warning. The DVD/CD player that I use is called TSST corp DVD +-RW TS - H653G

  Hello

  Code 39 means that the driver is corrupted or missing.

  Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of them.
  Selves at the start because they will be competing for resources. This does not mean that this problem was caused by
  These however is a possibility depending on which and how many you have installed.

  Definitel check with the help of Roxio and their forums - you may need to uninstall Roxio to see if this
  allows the reader to work (not re - install until the issue is resolved).

  -------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• After the upgrade of Windows 10 cannot burn a DVD

  After upgrade to 8.1 Windows 10 I get the following message when I try to burn a DVD

  "Something is preventing a burn DVD success.

  Use the ISO, saved to the following location to burn your disc more later:

  Svc.ISO of C:\Users\Kenneth\Documents\2015-08-09 of worship.

  Is there a setting that I missed in the upgrade?  In addition, I can't locate the ISO image file mentioned or at least I'm not in this directory?

  osprey20

  What you describe is probably a problem first elements 13/13.1 you may encounter on Windows 10 64-bit or 64-bit Windows 8.1.

  It is it happened 10 Windows. I did the upgrade even you did and all of my programs to Premiere Elements survived successfully. One of the first things I checked after the upgrade was the burn on DVD-video on DVD and AVCHD on DVD.

  First Elements ATR troubleshooting: PE: Premiere Elements on Windows 10 daily discoveries

  From your description of your results, go to edit Menu/preferences/general and look at the effect with and without the following preference disabled

  "Use hardware acceleration (works on Intel HD Graphics 2000 or higher)"

  Also, go to the folder of encoded files and delete its contents (encoding of temporary disk files)? Make sure that this folder is located in an area with lots of free space on the hard disk. See change preferences/Menu/Scratch disks and disk encoding category that goes back to the hard drive folder of encoded files.

  Let us start here and then decide what then.

  Thank you.

  RTA

• Satellite M40-285 - CPU overheating after the accident with water

  Hello everyone,

  I have a Toshiba Satellite M40-285, and 2 days ago, my girlfriend dumped a cup of tea on the keyboard... The computer turns off after a few seconds. Immediately, I put the laptop upside down and disassembled parts. There was some liquid inside (especially inside the speakers under the keyboard and where is the DVD unit). Other parts (CPU, memory, wireless card, hard drive area) were completely dry. I have it with napkings and dry with a hair dryer (later I read that I shoud never use a hair dryer...).

  The turs laptop on one seems to work fine (only the first screen where it says toshiba remains more than normal long (15 seconds or more) before entering windows). But the problem I have is that the CPU gets overheated and the laptop shuts down after 5-15 minits of use. I'm getting attention via the RightMark utility I said "* Core overheating * ' and the temperature always between 45 - 55 c

  I replaced the thermalgrease but the problem remains. The CPU fan works (I think that the two speeds). The heatsink is very hot after the computer turns off (it burns my fingers if I touch)

  What could be the problem? * Is the processor damaged? Can be a problem in the motherboard? *
  I don't know what to don't know because is not woth the money to send it to the technical service, but I can't buy a new laptop now...

  Hey,.

  I m wondering that the laptop is still ongoing and no more parts are damaged. In addition he s very cool that you could fix it yourself and dry. Many people don t know how ;)

  In any case, if the CPU is overheating it seems that something on the assembly or the cooling fan is damaged and must be replaced. Possibly peut t fan run with the highest speed more, who knows.

  Of course, it is difficult to say what is the cause of the problem, but in your case I would try ordering a new fan and the heatsink too. The two parties shouldn't t be expensive and it seems that you can replace yourself.
  So just contact a service provider allowed in your country to order these parts. They can do this.

  Good luck and feedback would be great, I am interested on this! :)

• Equium L350 - Vista fails to start after the installation of recovery

  Hello world

  I have an Equium L350 after an accident I couldn't restart my pc. I tried to solve by using the recovery f8 menu and it did not work so I contacted Toshiba and got a restore disc. I reinstalled from the disc, after the instalation it said complete installation but visa does not start.
  I get: Windows cannot repair this computer automatically click finished to turn off your pc

  After a format and reinstall my computer broken? He is 13 months here for out of warranty

  Hello

  Normally after the installation of recovery your laptop should work fine again.

  In my opinion, it could be a malfunction of the equipment. Did you test the HARD drive for bad sectors? You can do this with Drive Fitness Test: http://www.hitachigst.com/hdd/support/download.htm#DFT
  Download the ISO image and burn it to a disk. Then you can boot from it and test your HARD drive for errors.

  I also recommend to check the RAM for errors: http://memtest86.com/
  Memtest is a good diagnostic tool for the RAM.

  I hope I could help a bit. :)

• Computer TouchSmart HP Envy 17 t 2 weeks without a break stop at or just after the connection

  Hello

  I really need help because I am pulling all my hair out with frustration. Here are the details:

  I got a new Notebook HP TouchSmart 17 t for my birthday last week. I'm a developer and a code about 15 hours a day, and my laptop 15 inch 3 years was certainly an obstacle. Needless to say, I was very excited by envy, especially 17-inch screen.

  That excitement lasted about 2 days.

  In the first two days of use, I installed all the Windows, Windows updates 8.1, Chrome, Visual Studio, SQL Server 2012 and Management Studio, MySQL Workbench, Adobe Creative Cloud, MS Office, and Avast. The system will periodically re-start during this time, but he wasn't even epidemic.

  But from about the 3rd day, the computer began to stop more frequently. Initially, it was once every 30 minutes or so, but then increased rapidly so it restarted at or just after the login screen 9 of the 10 startups. Every 10th reboot or so, the computer will allow me to connect and I immediately try troubleshoot it before it will re-start again in 5 minutes or less.

  The only thing I could think of that changed on the 3rd day is I installed Kaspersky to replace Avast (the laptop came with a 1 year free Kaspersky subscription). I didn't know if it was the culprit, or if I had a lemon of a computer that was overheating because of hardware problems, but to be sure, I tried to uninstall it. However, the computer wouldn't stay long enough for me to do.  I couldn't even in HP Recovery to restore the system.

  Fortunately, I had burned the recovery DVDs and was able to start the recovery tool by booting from the DVD. I restored the computer configuration with minimal additional software installed (restore failed the on the first trial to 99% complete, but the second test was a success). I was really hoping this would solve the problem so I can start using my new laptop.

  No luck.

  The first time I turned on the computer after the restore, it immediately starts close to, or just after the screen connection again. As before, I am able to use the computer for 5 minutes every 10th reboot or so before it restarts. During those rare moments, I was able to enter the power management settings to turn off sleep and Hibernate, given that several forum posts which indicate as a potential culprit. However, the computer won't stay long enough to install updates of window or Windows 8.1, or to ensure that all drivers are up-to-date.

  Furthermore, I believe that the BIOS flashed when Windows 8.1 has been installed and I wonder if it needs to be reset. (I don't think the restoration process reactivates the BIOS to its original settings, but I have really no idea.)

  Anyway, here I am with a new laptop that I can not use.  I don't know if it's a driver problem, software conflict, hardware problem, problem of BIOS or something else. Needless to say, I am very frustrated and I would really appreciate suggestions.

  Thank you

  Tom

  Tom, welcome to the forum.

  This isn't how HP computers to run.  I strongly suggest that return you it and get another HP computer that works.  If it does not work long enough to install the updates, it will very probably not get much better.  I want to help you to save your hair!

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Error reading from disk after the installation of windows xp

  Ideas:

  • I got a new hard drive installed by professionals. I went to install Windows XP on my computer. He passed through the first stage, but after copying the files, it wouldn't restart. That repeatedly brings me to a screen that says: a disk read error occurred press Ctrl alt delete to restart and then it looks like it will restart but hten goees return the same screen. How can it be a disk error if it is passed by the installer and I've never touched the disc later? Now, I can't do anything with it. Any help would be greatly appreciated.

  Do not install an operating system is usually caused by (in order of probability):

  1. you are trying to install with other devices connected to the computer. Unplug them before trying to make an installation.

  2. "" "" defective installation media. "" Check the CD/DVD installation for scratches, tasks. Try another machine.

  3. bad optical drive. Test with another CD/DVD bootable or Exchange for a well-known work.

  4. faulty RAM. Test with Memtest86 + www.memtest.org . You will download the .iso image file to create a bootable cd. Burn the file with the third party burning software *-as an image, not in the form of data. Then start with the media that you did (you may need to change the boot priority in your BIOS so that the optical drive is the first boot device). The test runs immediately. The test run for an hour or two--at least that errors are seen immediately. If you get any errors, replace the RAM.

  A good free choice ImgBurn comes from www.imgburn.com .

  5. bad hard drive. Test with a diagnostic utility downloaded from site of the disc mftr... You create a bootable CD with the files you download. Burn the file with a third-party burning software - image, not in the form of data. Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it.

  (Note: since you just replaced your hard drive is probably not the cause.) However, you should always test because it is not uncommon that new hard drives to the failure of the box.)

  6. other hardware components are faulty. MS - MVP - Elephant Boy computers - don't panic!

• Could not read a DVD after the write operation

  Using windows XP sp3.

  I burned a dvd with nero data disc 9 esentials and then couldn't read or any other disk.

  Tried the disc in my computer vista laptop and it read fine.

  DMA is enabled.

  After a lot of noise, I restarted my computer xp and it will now play dvd's and discs again.

  I noticed that there are several entries in the device for ide primary and secondary Manager.

  Here is a link to the screenshot:

  http://AG1.dnsalias.com/photo/devicemanager.bmp

  Could be the problem?

  Now, I think that the problem may be due to the Nero 9 Essentials program if you close the program immediately after the write operation instead of clicking next and then closing. Thanks for your help.

• LG supermulti dvd burner is not detected by the system.

  I wanted to install ATI RADEON HD 4350 and so I uninstalled the driver Intel (r) GMA. I installed the card on the motherboard and I have installed the driver provided by the manufacturer using their CD and I also did other necessary things. Everything worked perfectly. Then in the driver user interface, I saw two monitors. I selected one of them, without any judgement and turns off the computer. Later, when I put it on I saw there was not on my screen and indicator showed natural signal, which was red. So I uninstalled the card and connect the monitor to the onboard connector cable.

  Sometimes the HDD and LG supermulti dvd burner got detected (both or one of them) and sometimes they were not. When they were done detected the speed and performance of the machine was very poor. Monitor has also not getting detected in Device Manager.Then I managed to uninstall the video adapter driver and is also further things to slove the problem:

  Checking the SATA connections (my HDD is on the SATA1 and LG supermulti dvd burner is SATA 2), checking the other connections, Clearing RTC RAM etc, but nothing gave me a permanent solution.

  Then I did a BIOS update and I did an upgrade to Windows XP SP3, stay inside Windows and I also reinstalled driver Intel (r) GMA (new version).

  Now the problem is the drive is detected but supermulti LG dvd writer is not. But now the monitor is in my device manager and performance is good. Now what should I do to the system so that it could detect LG supermulti dvd burner?

  Two other points are:

  1. when I was using the video card my system was attacked by a Trojan horse, but now it's OK after running a full scan using KIS2011 and take necessary measures.

  2 is powered for the LG supermulti dvd burner because it is to open when I am pressing the button.

  System Specs:

  OS: Win XP SP3 x 32

  MB:Asus P5QPL-AM (it has integrated video card)

  The problem has been resolved by running a scan for hardware changes in Device Manager. I did it before but this time it worked.

• CD/dvd burner writes correctly, but displays the error message ' medium not present-tray closed. - 0X023A01'.

  Hello

  I have a unique problem where my cd/dvd burner burn my data to a recordable cd (not verified with recordable dvd yet) correctly, but after the burning process I get an error message "(devMediumNotPresent_TrayClosed) closing session error (Session: 4 medium not present-tray closed. - 0X023A01'.)"

  I tried roxio and nero, cdburnerxp, but I get this error on the whole. However, the burn is successful. I can open the data burned in my laptop or other computers and use the same drive to burn more data in the other computer. I tired to reduce speed, but it is of no use. I have also reinstalled the drivers but no use at the end I also did a clean uninstall of Roxio-> then installed Nero-> Nero clean uninstall-> then install Cdburnerxp 4.3.2.2140.

  Use the same media brand in my desktop LG cd/dvd combo drive, and things are absolutely perfect.

  Fix Microsoft, it gives the following report: -.

  -------------------------------------------------------

  Problems found status

  Drive is not capable of burning (TSSTcorp DVD +-RW TS - L632H) detected other Solutions
  -----------------------
  Issues checked the status

  Device is not working properly (TSSTcorp DVD +-RW TS - L632H) checked other Solutions

  Filter of device drivers are corrupt (TSSTcorp DVD +-RW TS - L632H) checked other Solutions

  Class filter drivers are corrupt checked other Solutions

  Drive is not assigned one drive letter other verified Solutions

  Drive is disabled (TSSTcorp DVD +-RW TS - L632H) checked other Solutions

  ------------------------------------

  Other details: -.

  Dell Inspiron 1520 laptop | XP Pro | TSSTcorp DVD +-RW TS-L632H | CDBurnerXP 4.3.2.2140

  Please let me know if all of the other details are required. Waiting for a response

  Concerning

  TKS

  Hello

  I got my ODD back to normal. The simple solution was to clean the lens of the drive. I called a Dell technician. He inspected the car and found that the problem was due to an unclean lens. In fact, I have never cleaned the lens since I bought the laptop in February 2008. I used a lens cleaner with 6 brushes Writex.

  I also checked the drive by
  1. create a Live CD: Ubuntu
  2. a burned DVD
  3 burn a different brand CD

  Above all 3 tasks are normally carried out with any error. The player read / written correctly.

  Good bye.