Server for the JavaFX client-side

Similar Questions

• Error: you have an error in your SQL syntax; consult the manual for your version of the MySQL server for the right syntax to use near ')' at line 5

  Original title: how to solve this problem:

  System error

  You have an error in your SQL syntax; consult the manual for your version of the MySQL server for the right syntax to use near ')' at line 5

  Hi Roger,

  It seems that you have problems with the SQL syntax. The question you have posted is related to encoding and it would be better suited to the MSDN Community. Please report it in the community below.

  http://social.msdn.Microsoft.com/forums/SQLServer/en-us/home

  Hope this is useful.

• No VRM server registered with vCenter Server for the site 'Live '.

  I have SRM 6.1 and vSphere replication 6.1 installed on both sites.

  The ECP is connected to the vCenter server.

  I get this error message: failed to create the protection group. No VRM server registered with vCenter Server for the site 'Live '.

  Screenshot attached, no one knows what is happening here?

  

  However, there was a mismatch in the meantime server on all except VRA in the remote site, it is now resolved and the issue disappeared.

  Strange, how the error related to the site online, however.

  Thank you for pointing me in the right direction.

• How to set a default email for the reader client?

  How to set a default email for the reader client?

  [Left the forum Cloud/Installer generic for program specific forum... MOD]

  In the section in the preferences e-mail accounts.

• Why do I get a SQL syntax; consult the manual for your version of the MySQL server for the proper syntax

  I have a purchase order where my buyers can add to my form. I use a loop that adds an extra line when they add a new product. I'm storing the information in two tables different mySQL. The first is alll of my personal, the second is the elements. My personal records correctly. However, I get the following error when you save the items:

  You have an error in your SQL syntax; consult the manual for your version of the MySQL server for the right syntax to use near 1, 'wer 2345', 1, 1)' on line 9

  The error occurred in E:\webs\clarkwebhosting.com\SSL\esrc\order_add.cfm on line 74

  ++ After storage of the personal information, I take the command ID to populate the table of Articles

  < cflock timeout = "5" >

  < name cfquery = "qGetorderID" datasource = "#application.dsn #" >

  Select max (orderID) as oid of orders

  < / cfquery >

  < / cflock >

  < cfoutput > < cfset getoid = #qGetorderID.oid # > < / cfoutput >

  ++ Is the loop that I use to fill the table items ++

  < cfloop to = "#form.numba # '1' = ' index 'idx' = >"

  < cfset getqty = evaluate ("form.qty" & idx) >

  < cfset getitem = evaluate ("form.item" & idx) >

  < cfset getunit = evaluate ("form.unit" & idx) >

  < cfset gettotal = evaluate ("form.total" & idx) >

  < name cfquery = "insertItems" datasource = "#application.dsn #" >

  INSERT in Articles

  (orderID,

  quantity,

  agenda,

  Unit,

  total

  )

  VALUES)

  < cfqueryparam value = "" #getoid # "CFSQLType ="CF_SQL_INTEGER">"

  < cfqueryparam value = "" #getqty # "CFSQLType ="CF_SQL_INTEGER">,"

  < cfqueryparam value = "" #getitem # "CFSQLType ="CF_SQL_VARCHAR">,"

  < cfqueryparam value = "" #getunit # "CFSQLType ="CF_SQL_INTEGER">,"

  < cfqueryparam value = "" #gettotal # "CFSQLType ="CF_SQL_INTEGER">"

  )

  < / cfquery >

  < / cfloop >

  This line: 1, 'wer' 2345, 1, 1 is the first element of the command line. Any ideas as to why it doesn't work? I use 5.5.9 - log CF9 and mySQL

  My apologies... that should have been (note the quotes)...

  In addition, it would be...

  On another note... You should probably avoid using cfinput and simply use the standard form tags.

• How to configure the SMTP server for the osb 10.3.1

  Hi all
  
  Anyone can share information on how to configure the SMTP server for the osb 10.3.1
  and then how to send an email to OSB 10.3.1
  
  Thanks in advance!

  See this url:
  https://blogs.Oracle.com/christomkins/entry/sending_an_email_from_oracle_s

• Dynamic CRM2011 for the outlook client does not recognize that I have already installed SP2

  Dynamic CRM2011 for server (vista 64-bit) or the outlook client does not recognize that I have already installed SP2

  Error log (edited to highlight what appears to be the problem):
  Latest Version of the OS: 6.0.6001
  11:14:06 |   Info |   Service Pack: Service Pack 1
  11:14:06 |   Info |   System type: workstation
  11:14:06 |   Info |   Mask away: 0 x 0300
  11:14:06 |  Error | Failed to install Microsoft Dynamics CRM for Outlook. Install Windows Vista Service Pack 2 and then try again.
  11:14:06 |  Error | System requirements not filled to allow the installer to run.
  My computer works SP2 and all current updates except for:
  • Platform Update for Windows Vista x 64-based Systems (KB971644)

  1. error: 8000ffff

  I ran 'fit' the Microsoft tool, but made no difference. This update is my problem, or I am barking the wrong tree?

  Help, please!

  Hi Paul,.

  The question you posted would be better suited in the Forums of Microsoft Dynamics. I would recommend posting your query in the Forums of Microsoft Dynamics.

  http://social.Microsoft.com/forums/en-us/category/Dynamics

• Can built-in DHCP of WLC provide IP addresses for the wired client?

  Hello

  We have a WLC running on 7.0.98.0. It provides IP addresses for users without comment thread. Now, we would like to put a couple of wired posts for customers who do not bring mobile no. I wonder if I put these workstations on the same vlan without comment thread, they can always get IPs of the WLC. If this isn't the case, I put the static IP on these workstations.

  Thanks in advance.

  Robert

  Rob:
  The answer is simply "no". WLC cannot provide clients wired on the same VLAN wireless whose IP address if DHCP is configured on WLC.

  Fbarboza above metnioned is a 'very' special configuraiton on wireless LANs where the WLC is configured to support some wireline customers and he needs to have two WLCs (the show is called Wired comments). This particular case does not apply to your situation.

  With your situation, my answer above apply.

  Note 
  A internal DHCP server pool will only serve the wireless clients of that controller, not clients of other controllers. Also, internal DHCP server can only serve wireless clients and not wired clients.
  

  Reference: http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70wlan.html

  HTH

  Amjad

• DHCP server for debugging VPN clients

  We are DHCP configuration to a DHCP server for SSLVPN customers on our ASA 8.2 running, and it does not work yet.

  I set the DHCP server to the tunnel profile to use, set the scope of the network dhcp for the group - that seems to be all that is needed.

  Currently, the problem is I'm having trouble finding debug commands that provide detailed information on what is happening with DHCP queries.

  Debug only the DHCP-based controls seem to be:

  DHCPC Client DHCP information

  DHCPD dhcpd information, and
  dhcprelay DHCP Relay information

  I ' ve tried the client and relay debugs and I see is that the client is not giving an IP address valid. " 0.0.0.0/0.0.0.0

  The DHCP server is not a request from this ASA for the network defined in the dhcp-network for the group scope, and we see nothing on the DHCP server in debugging results.

  Any suggestions would be welcome.

  Lynne

  you will see a button like "marks" as answered

  You can also sort the useful answers.

  Concerning

  Ashish

• Try to run a P2V on Linux (RHEL5) server for the first time, may not know how to get * started *.

  Hi - I'm trying to figure out how do a P2V for a Linux (RHEL5) server, and everything I find documentation seems to start with, «now that you have the Converter Wizard run...» »

  (Linux Linux Linux, no NOT of Windows)

  Can I buy a vowel on how / where can I Start, from the beginning, please?

  I am running VMware VirtualCenter 2.5.0 (build 119598) using VMware Infrastructure Client 2.5.0 (build 119826), and everything works fine.

  I have the plugin VMware Converter Enterprise 4.0.2 installed and enabled on the virtual circuit.

  I downloaded archive VMware Converter (autonomous) "Converter-4 - 146302.tar.gz", but have not yet installed all this anywhere.

  I can't find anything in the VC on the converter, beyond that the plugin is installed and activated, so I guess that I don't start the conversion process.

  Here's my question:

  The converter is supplied with a server, a Client and an Agent.

  Simply install the Agent on the physical Linux box I want to convert, the Agent and the customer, all three pieces or what?

  Once I have some parts I need installed on the physical area Linux, start the conversion from here, or from the VC or what?

  Y at - there a page somewhere that describes it in a way that is useful for someone who has never done this before?

  Any help, pointers, advice, suggestions, acts of mercy greatly appreciated.

  Thank you.

  OK, this isn't really as complicated as you make it to be:

  1. you ran Setup on a machine that can reach the source and the ESX on the network.  You are trying to install 'this' or ' only that. "  You install.  The only difference between a "local installation" and "installation of client server", is that it allows you to install the client on another machine and control the Converter on this other server machine.  Maybe it's not necessary for you, but it does not hurt so I always do.

  2. you start the Client of converter (vmware-converter-customer) on a machine where you installed everything.

  3. you choose the IP accessible (from ESX) the source for the source power Linux machine remotely.

  4. you select the target ESX (or the Victoria Cross, but there is really no point, you can simply point directly to the target ESX).

  5. you enter a static IP address of VM for assistance if necessary.

  6. you look at the progress meter and see the conversion complete.  You don't need to worry about what anyone else unless you have a firewall preventing circulation.

  P.S., Another user has published this guide to make a LInux P2V with converter, you may find useful:

  http://www.Vladan.fr/how-to-P2V-Linux-into-VMware-ESX-Server/

  (If your question has been resolved please check the responses as 'Useful' or 'Correct').

• implementation of the Hosts file on the server for the entire network?

  I see a lot of information on how to edit the local Hosts file on individual computers. But, is it possible to edit a Hosts file and have effect throughout the network?

  We have a network of a little over half a dozen of Mac mini, who take their DNS information from another Mac Mini running the application server OSX (under El Capitan). This server is the primary DNS machine for the network. I want to implement a Hosts file for the entire network.

  Parental control seems to be broken in OSX El Capitan, so this seems like the best next to us, short option to buy some third-party service, which I prefer not to do.

  I think that dnsmasq installation on your Mac server and configuration of all your computers to use as your "DNS Server" will achieve what you want.

  See osx https://oracle-base.com/articles/misc/dnsmasq-for-simple-dns-configurations-mac-

  Why do you feel you must do this?

• Change the name of the server for the Regional service account

  Is there a way to change the name of the server for an EAS account without having to delete the account and add it again?  If this isn't the case, Palm, please put in this capacity.

  Thank you.

  Hello!

  The reason this not prevail as a fail-safe in the EAS Protocol feature.  From a point of view of corporate security, companies do not want the chance to sensitive business data being extract/put in one or more different servers that could very well not be themselves.  Any device using EAS must remove the Acct. and add a new.  Need help with data migrations that isn't the new server.

• Authentication problem of proxy server for the domain while accessing internet users?

  We have a problem in my company with the proxy server.

  We have an Isa proxy server to restrict some users who access the internet

  allow us some users and sites for them to access

  but some times it requires authentication for all users who have access also. At that time they keep calling us. so I created a temporary rule to allow all traffic for all users. After awhile, we disable and it is working... but in some cases allow same temp rule also does not work so we say - join the domain and join the domain again...

  It seems that these are all temporary, full-time for us of how, it became

  Is there a permanent solution to this problem...

  Please help us solve this problem

  Thank you and best regards,

  Hi jagdeeshk,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Server forum.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• Droid - address of the SMTP server for the outgoing

  Can someone tell me what this must be.  I am trying to set up my work Email and my tech at corp said that I needed to get this information from service provider.

  Try smtp.vzmail.net for the outgoing server.  If you have verizon for your ISP, try outgoing.verizon.net

  Worth with the key word being "try."

• Examples of Code for the (Simplified) Client software

  After digging through the application of the whole sample RIM provides I thought I want to provide a code for the simplified example. Short opinion: post connection suffix is not allowed on the forums. You can see the sample application of the RIM if you do not already elsewhere. Please see the article here, it's under review if you want to contribute (although the code is mainly in the attached files): http://supportforums.blackberry.com/t5/BlackBerry-Push-Development/Simplified-BIS-Push-client-sample...

  the article has been published: http://supportforums.blackberry.com/t5/BlackBerry-Push-Development/Simplified-BIS-Push-client-sample...