Session and event information

Similar Questions

• How can I erase the active sessions and / or authenticated at a granular level?

  When I visit a Web site and I authenticate either via username or certificate / States PKI, identification and authentication information is stored somewhere. I want to know where that somewhere, so I can cancel these one at a time manually.

  I understand that I can go into the Options and clear browsing data - and Yes, this will accomplish the same sorta thing - however, it will kill ALL my sessions authenticated through ALL my tabs. I would like to know if there is a manual way where I can do BY the site, while it is not a such brute force method.

  Last note: I don't want to close all my tabs (Firefox completely quit). Nor do I want to go through the options to do. If I can be educated to know where is my session store location and authentication, then this will answer my question.

  I am an advanced user and have no problem working my way around my system to fit my needs, I don't know where to find this database store.

  It is likely not possible since it is to disconnect from the secret decoder ring (CSD) and the sending of a notification to close all http and ftp sessions (net: clear active connections).

  See 'sessions' in chrome://browser/content/sanitize.js

  • http://MXR.Mozilla.org/Mozilla-central/search?string=clear-active-logins
  • http://MXR.Mozilla.org/Mozilla-central/search?string=logoutAndTeardown

• After you type the master password in session can force type master password once again without ending the current session and start new session?

  Sometimes after using the password to access an account during a given session of firefox, I want to "repeal" this ability of automatic access (i.e. require type the password again once) without having to put an end to the current session and restart firefox.

  It's nice to only have to type the password once per session, there are times when after launching an action that I would let the browser unattended for a short period but to prevent others to access sensitive information on other sites if they can't my master password. Note that this is not the same thing as "locking the browser. Currently, the only way I know to force it is to kill the session and restart the browser but it's not very satisfying if I really want to stay connected (allowed) to a particular site. I hope that adding a button in the Security tab "requires the master password for the current session" would be a simple solution to implement? Thank you for your attention.

  You can connect from the software security device (e.g. click Cancel in the dialog box display the passwords) to force them to return to the MP once more.

  • Tools > Options > Security: passwords: "saved passwords" > "show passwords".
  • Tools > Options > advanced > encryption: Certificates > safety devices: software security device: Logout button

• Received phone calls from Adelaide number telling me that my computer will crash in two days, if I do not open a session and follow his instructions because of Trojan virus

  original title: Trojan warnings

  Received phone calls from a number of Adelaide telling me that my computer will crash in two days, if I do not open a session and follow his instructions because of Trojan virus.  Nobody gave his name and phone number and said she is Microsoft?  She also told me that it was free and part of Windows security. How will I know if it is authentic or not?

  Hello

  It's a SCAM

  Microsoft does NOT contact you unless you have for them to

  read this:

  http://www.Microsoft.com/security/online-privacy/msName.aspx

  Microsoft has none of the unsolicited telephone calls to help you fix your computer

  In this type of scam cybercriminals are calling you and claim to be of Support technique Microsoft. They offer help with your computer problems. Once scammers have earned your trust, they try to steal and damage your computer with malicious software, including viruses and spyware.

  Although the law enforcement can trace phone numbers, often authors use pay telephones, disposable cell phones or stolen cellular phone numbers. Better avoid fooling themselves rather than try to repair the damage afterwards.

  Treat all unsolicited sceptically telephone calls. Don't provide personal information.

  If you receive an unsolicited call from someone who claims to be from Technical Support Microsoft, hang up. We do not have such calls.

  If you think you might be a victim of fraud, you can report it. For more information, see: what to do if you think you have been scammed.

• The affinity of session and Application Module API

  Hi all
  
  We have some problems to understand why - the session affinity is not preserved when you use some of the methods provided by the interface of the AOS.
  
  In particular, we analyzed the effects of the method post_changes on the session of DB that the referenced instance of AM used to execute the method:
  We have seen that post_changes, when called, outside any internal modification of ADF, also locks the tables DB changes the user through the web interface of the session. Very well.
  
  Now if another user opens a Web Session and, for some reason, the above AOS instance is recycled to the pool, then the DB used by instance AM session is restored to be ready for the demands of the new session, so the previous table locks are lost and the new user can basically do anything with the table/view objects.
  
  The question is:
  
  Why are they not all the effects of post_changes (which is the framework method) "passivees/enabled" as the other methods of the framework, for example: "insert/delete/update? or why locks are lost?
  We expected these paintings remain locked after the instance referenced AM was recycled (i.e. is no rollack should have be done).
  
  Basically, we think that there is something inconsistent in the behavior of the framework: simultaneity is always choerent for some base DML (insert, update, delete) via the API framework, but, on the other hand, at least in the case of post_changes the "effects" of the two concurrent on AOS users same instance may be gone.
  
  Could someone give no explanation?

  Because postChanges actually performs the DML against the underlying tables in the DB instead of simply store the intermediate layer state information. The effects of the postChanges cannot be passive/active. If you do not postChanges, then the insert/delete/update is just the State information in the middle tier and can be passivated/activated.

  In short, as we discussed on your other thread, you shouldn't be trying to keep DB state between requests :)

• disinfect and validation of sessions and cookies

  From a security point of view I'm disinfection and input validation.

  Create a session using the displayed username that is disinfected and validated first on a registration of the user.

  On further visits when the usernames in their username is validated data base and again a session is created and used throughout their pages.

  I put only ever the SESSION for the user, but in my code at the end of the session (according to the information I have seen and read), I finished the session with:

  unset($_SESSION['username']);

  $_SESSION = array();

  invalidate the session cookie

  If (isset($_COOKIE['username'])) {}

  setcookie ('username', ", time () - 86400, ' / ');

  }

  session_destroy();

  Now, I never really the cookie or use it to my knowledge but I have seen that this code should be used to end a session, so I presume that there is a valid reason and that the SESSION must use the COOKIE and I wonder if $_COOKIE ['username'] must be disinfected whenever the user navigates to a different page in their administration pages I saw that filter_input functions have an option to filter the entrance of cookie. I apologize for not understanding what are cookies in this situation, everything I do is actually set during the connection session and finish on logout.

  I do something like:

  If (filter_has_var (INPUT_COOKIE, "username")) {}

  $cleancookie = filter_input (INPUT_COOKIE, 'username', FILTER_SANITIZE_STRING);

  $_COOKIE ['username'] = trim ($cleancookie);

  Maybe it would also be useful if I knew why I had reset the session cookies every time I have finished a session, if someone could kindly explain.

  Following disinfection session cookies what the stored value in $_SESSION ['username'], so that the user moves between their admin pages this value should be reorganized and if so please could someone advise me how best to do this. Maybe I should validate against the expected values of just say letters and numbers?

  Thank you in advance for any help, information and answers to help me to understand and solve the problems of security above.

  tessimon wrote:

  invalidate the session cookie

  If (isset($_COOKIE['username'])) {}

  setcookie ('username', ", time () - 86400, ' / ');

  }

  .. .in my code is not relevant in this situation and can be removed?

  At the start of:

  unset($_SESSION['username']);

  session_destroy();

  Yes. That should be enough.

  What about the security of the SESSION ID variable is stored as a cookie on the user's computer, can it be corrupted?

  Once someone has been connected, it is generally considered a good idea to regenerate the session ID using session_regenerate_id(). To do that only once in respect of the identification of the user information has been verified.

• Difference between v$ session and v$ _session

  Please say it.
  
  (1) difference between v$ session and v$ _session
  
  (2) v$ session a synonym, derived from v$ _session or v$ _session is views v$ session... hw are created and interlinked

  1 V_$ SESSION and GV_$ SESSION are seen, where as GV$ SESSION and V$ SESSION are synonymous: -.

  07:17:43 oracle[SQLPLUS]@dbalnp01[fraespappp90c] > select * dict where TABLE_NAME in (' V$ SESSION ', ' GV$ SESSION ");

  TABLE_NAME COMMENTS
  ------------------------------ --------------------------------------------------------
  Synonym SESSION GV$ for GV_$ SESSION
  V$ SESSION synonym of V_$ SESSION

  [06: 53:14 oracle[SQLPLUS]@dbalnp01[fraespappp90c] > select owner, object_name, object_type, status, CREATED, LAST_DDL_TIME from dba_objects where in('V_$SESSION','GV_$SESSION','GV$SESSION','V$SESSION') object_name.

  STATUS OF OWNER CREATED LAST_DDL_TIME OBJECT_TYPE OBJECT_NAME
  ------------------------------ ------------------------------ ------------------- ------- ----------------- -----------------
  SYS GV_$ SESSION VIEW VALID 20100329 08:45:36 20100329 08:45:36
  SYS V_$ SESSION VIEW VALID 20100329 08:45:27 20100329 08:45:27
  SYNONYM OF SGS PUBLIC SESSION $ VALID 20100329 08:45:36 20100329 08:45:36
  PUBLIC SYNONYM V$ SESSION VALID 20100329 08:45:27 20100329 08:45:27

  [06: 51:12 oracle[SQLPLUS]@dbalnp01[fraespappp90c] > select OWNER, SYNONYM_NAME, TABLE_OWNER, TABLE_NAME from dba_synonyms where SYNONYM_NAME like 'V_SESSION ';

  OWNER SYNONYM_NAME TABLE_OWNER, TABLE_NAME
  ------------------------------ ------------------------------ ------------------------------ ------------------------------
  PUBLIC V$ SESSION SYS V_$ SESSION

  [06: 51:20 oracle[SQLPLUS]@dbalnp01[fraespappp90c] > select OWNER, SYNONYM_NAME, TABLE_OWNER, TABLE_NAME from dba_synonyms where SYNONYM_NAME like 'GV_SESSION ';

  OWNER SYNONYM_NAME TABLE_OWNER, TABLE_NAME
  ------------------------------ ------------------------------ ------------------------------ ------------------------------
  OPEN SGS MEETING $ SYS GV_$

  07:17:24 oracle[SQLPLUS]@dbalnp01[fraespappp90c] > select VIEW_NAME, dba_views TEXT where VIEW_NAME in('GV_$SESSION','V_$SESSION');

  VIEW_NAME TEXT
  ------------------------------ --------------------------------------------------------------------------------
  Gv_$ SESSION select INST_ID 'select', 'SADDR', 'SID', ' SERIAL # ', 'AUDSID', 'PADDR', ' USER # ","USERNAME","CO ".
  "MM AND ', 'OWNERID', 'TADDR', 'LOCKWAIT', 'STATUS', 'SERVER', ' SCHEMA #", "SCHEMANAME", "OS".
  USER', 'PROCESS', 'MACHINE', 'TERMINAL', 'PROGRAM', 'TYPE', 'SQL_ADDRESS', 'SQL_HASH_VA '.
  READ', 'SQL_ID', 'SQL_CHILD_NUMBER', 'PREV_SQL_ADDR', 'PREV_HASH_VALUE', 'PREV_SQL_ID '.
  , 'PREV_CHILD_NUMBER', 'PLSQL_ENTRY_OBJECT_ID', 'PLSQL_ENTRY_SUBPROGRAM_ID', 'PLSQL_ '.
  "OBJECT_ID", 'PLSQL_SUBPROGRAM_ID', 'MODULE', 'MODULE_HASH', 'ACTION', "ACTION_HASH '"
  CLIENT_INFO","FIXED_TABLE_SEQUENCE"," ROW_WAIT_OBJ # "," ROW_WAIT_FILE # ","ROW_WAIT_B ".
  "LOCK #", "ROW_WAIT_ROW #", "LOGON_TIME', 'LAST_CALL_ET', 'PDML_ENABLED', 'FAILOVER_TYPE '.
  ', 'FAILOVER_METHOD', 'FAILED_OVER', 'RESOURCE_CONSUMER_GROUP', 'PDML_STATUS', 'PDDL_ '.
  STATUS', 'PQ_STATUS', 'CURRENT_QUEUE_DURATION', 'CLIENT_IDENTIFIER', 'BLOCKING_SESSI '.
  ON_STATUS', 'BLOCKING_INSTANCE', 'BLOCKING_SESSION', ' SEQ # ', ' EVENT # ', 'EVENT', 'P1TEX '.
  "T", "P1", 'P1RAW', 'P2TEXT', 'P2', 'P2RAW', 'P3TEXT', 'P3', 'P3RAW', 'WAIT_CLASS_ID', 'WAI '.
  "T_CLASS #", "WAIT_CLASS", "WAIT_TIME', 'SECONDS_IN_WAIT', 'STATE', 'SERVICE_NAME', 'SQL '.
  _TRACE', 'SQL_TRACE_WAITS', 'SQL_TRACE_BINDS' of gv$ session

  V_$ SESSION select "SADDR", "SID", "SERIAL #", "AUDSID", 'PADDR', ' USER # ', 'USERNAME', 'ORDER', 'OW. '
  NERID', 'TADDR', 'LOCKWAIT', 'STATUS', 'SERVER', ' SCHEMA # ","SCHEMANAME", 'OSUSER', 'PRO '.
  CESS', 'MACHINE', 'TERMINAL', 'PROGRAM', 'TYPE', 'SQL_ADDRESS', 'SQL_HASH_VALUE', 'SQL_ '.
  "ID", "SQL_CHILD_NUMBER", "PREV_SQL_ADDR", "PREV_HASH_VALUE", "PREV_SQL_ID", "PREV_CHI".
  LD_NUMBER', 'PLSQL_ENTRY_OBJECT_ID', 'PLSQL_ENTRY_SUBPROGRAM_ID', 'PLSQL_OBJECT_ID '.
  , 'PLSQL_SUBPROGRAM_ID', 'MODULE', 'MODULE_HASH', 'ACTION', 'ACTION_HASH', 'CLIENT_INF '.
  O","FIXED_TABLE_SEQUENCE"," ROW_WAIT_OBJ # "," ROW_WAIT_FILE # "," ROW_WAIT_BLOCK # ","RO ".
  "W_WAIT_ROW #", "LOGON_TIME', 'LAST_CALL_ET', 'PDML_ENABLED', 'FAILOVER_TYPE', 'FAILOVE.
  R_METHOD', 'FAILED_OVER', 'RESOURCE_CONSUMER_GROUP', 'PDML_STATUS', 'PDDL_STATUS', 'P '.
  Q_STATUS', 'CURRENT_QUEUE_DURATION', 'CLIENT_IDENTIFIER', 'BLOCKING_SESSION_STATUS '.
  , 'BLOCKING_INSTANCE', 'BLOCKING_SESSION', ' SEQ # ', ' EVENT # ', 'EVENT', 'P1TEXT', 'P1', 'P '.
  1RAW', 'P2TEXT', 'P2', 'P2RAW', 'P3TEXT', 'P3', 'P3RAW', 'WAIT_CLASS_ID', ' WAIT_CLASS, #
  'WAIT_CLASS', 'WAIT_TIME', 'SECONDS_IN_WAIT', 'STATE', 'SERVICE_NAME', 'SQL_TRACE","S
  QL_TRACE_WAITS","SQL_TRACE_BINDS"from v$ session

  Definition of GV$ SESSION and V$ SESSION;

  [07: 25:29 oracle[SQLPLUS]@dbalnp01[fraespappp90c] > select definition_de_vue from v$ fixed_view_definition where view_name = "GV$ SESSION;

  DEFINITION_DE_VUE
  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  select s.inst_id,s.addr,s.indx,s.ksuseser,s.ksuudses,s.ksusepro,s.ksuudlui,s.ksuudlna,s.ksuudoct,s.ksusesow, decode(s.ksusetrn,hextoraw('00'),null,s.ksusetrn),decode(s.ksqpswat,hextoraw('00'),null,s.ksqpswat),decode(bitand(s.ksuseidl,11),1,'ACTIVE',0,decode(bitand(s.ksuseflg,4096),0,'INACTIVE','CACHED'),2,'SNIPED',3,'SNIPED', 'KILLED'),decode(s.ksspatyp,1,'DEDICATED',2,'SHARED',3,'PSEUDO','NONE'), s.ksuudsid,s.ksuudsna,s.ksuseunm,s.ksusepid,s.ksusemnm,s.ksusetid,s.ksusepnm, decode(bitand(s.ksuseflg 19) , 17, 'BACKGROUND', 1, 'USER', 2, 'RECURSIVE','? '), s.ksus
  ESQL, s.ksusesqh, s.ksusesqi, decode (s.ksusesch, 65535, to_number (null), s.ksusesch), s.ksusepsq, s.ksusepha, s.ksusepsi, decode (s.ksusepch, 65535, to_number (null), s.ksusepch), decode (s.ksusepeo, 0, to_number (null), s.ksusepeo), decode (s.ksusepeo, 0, to_number (null), s.ksusepes), decode (s.ksusepco, 0, to_number (null), s.ksusepco), decode (s.ksusepco, 0, to_number (null), s.ksusepcs), s.ksuseapp, s.ksuseaph, s.ksuseact, s.ksuseach, s.ksusecli, s.ksusefix, s.ksuseobj, s.ksusefil, s.ksuseblk, s.ksuseslt, s.ksuseltm, s.ksusectm, decode (bitand (s.ksusepxopt 12) 0, ' N
  O','YES'),decode(s.ksuseft, 2,'SESSION', 4,'SELECT',8,'TRANSACTIONAL','NONE'),decode(s.ksusefm,1,'BASIC',2,'PRECONNECT',4,'PREPARSE','NONE'),decode(s.ksusefs, 1, 'YES', 'NO'),s.ksusegrp,decode(bitand(s.ksusepxopt,4),4,'ENABLED',decode(bitand(s.ksusepxopt,8),8,'FORCED','DISABLED')),decode(bitand(s.ksusepxopt,2),2,'FORCED',decode(bitand(s.ksusepxopt,1),1,'DISABLED','ENABLED')),decode(bitand(s.ksusepxopt,32),32,'FORCED',decode(bitand(s.ksusepxopt 16) ((, 16, 'DISABLED', 'ENABLED')), s.ksusecqd, s.ksuseclid, decode (s.ksuseblocker, 4294967295, "UNKNOWN", 4294967294)
  ('UNKNOWN', 4294967293, 4294967292 'UNKNOWN', 'No. HOLDER', 4294967291, 'NOT IN WAIT', 'VALID'), decode (s.ksuseblocker, 4294967295, to_number (null), 4294967294, to_number (null), 4294967293, to_number (null), 4294967292, to_number (null), 4294967291, to_number (null), bitand(s.ksuseblocker, 2147418112)/65536), decode (s.ksuseblocker, 4294967295, to_number (null), 4294967294, to_number (null), 4294967293, to_number (null), 4294967292, to_number (null), 4294967291, to_number (null), bitand (s.ksuseblocker) 65535)), s.ksuseseq, s.ksuseopc, e.kslednam, e.ksledp1, s.ksusep1, s.ksusep1r, e.ks
  ledp2, s.ksusep2, s.ksusep2r, e.ksledp3, s.ksusep3, s.ksusep3r, e.ksledclassid, e.ksledclass #, e.ksledclass, decode (s.ksusetim, 0, 0,-1, -1, -2-2, decode(round(s.ksusetim/10000),0,-1,round(s.ksusetim/10000))), s.ksusewtm, decode (s.ksusetim, 0, "PENDING",-2, 'TIME WAITED UNKNOWN', -1, 'WAITED SHORT TIME', decode (round (s.ksusetim/10000), 0, 'WHEREAS SHORT TIME', 'WHEREAS KNOWN TIME')), s.ksusesvc, decode (bitand(s.ksuseflg2,32), 32, 'ENABLED', 'DISABLED'), (bitand (s.ksuseflg2 decode (, (64) 64, "TRUE", "FALSE"), decode (bitand (s.ksuseflg2, 128), 128, "TRUE", "FALSE") x $ ksuse s, x
  e $ksled where bitand (s.ksspaflg, 1). = 0 and bitand (s.ksuseflg, 1). = 0 and s.ksuseopc = e.indx

  [07: 27:25 oracle[SQLPLUS]@dbalnp01[fraespappp90c] > select definition_de_vue from v$ fixed_view_definition where view_name = "V$ SESSION;

  DEFINITION_DE_VUE
  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  Select SADDR, SID, SERIAL #, AUDSID, PADDR, USER #, USER name, COMMAND, OWNERID, TADDR, LOCKWAIT, STATUS, SERVER, SCHEMA #, SCHEMANAME, OSUSER, PROCESS, MACHINE, TERMINAL, PROGRAM, TYPE, SQL_ADDRESS, SQL_HASH_VALUE, SQL_ID, SQL_CHILD_NUMBER, PREV_SQL_ADDR, PREV_HASH_VALUE, PREV_SQL_ID, PREV_CHILD_NUMBER, PLSQL_ENTRY_OBJECT_ID, PLSQL_ENTRY_SUBPROGRAM_ID, PLSQL_OBJECT_ID, PLSQL_SUBPROGRAM_ID, MODULE, MODULE_HASH , ACTION, ACTION_HASH, CLIENT_INFO, FIXED_TABLE_SEQUENCE, ROW_WAIT_OBJ #, ROW_WAIT_FILE #, ROW_WAIT_BLOCK #, ROW_WAIT_RO
  W #, LOGON_TIME, LAST_CALL_ET, PDML_ENABLED, FAILOVER_TYPE, FAILOVER_METHOD, FAILED_OVER, RESOURCE_CONSUMER_GROUP, PDML_STATUS, PDDL_STATUS, PQ_STATUS, CURRENT_QUEUE_DURATION, CLIENT_IDENTIFIER, BLOCKING_SESSION_STATUS, BLOCKING_INSTANCE, BLOCKING_SESSION, SEQ #, EVENT #, EVENT, P1TEXT, P1, P1RAW, P2TEXT, P2, P2RAW, P3TEXT, P3, P3RAW, WAIT_CLASS_ID, WAIT_CLASS #, WAIT_CLASS, WAIT_TIME, SECONDS_IN_WAIT, STATE, SERVICE_NAME , SQL_TRACE, SQL_TRACE_WAITS, SQL_TRACE_BINDS of GV$ SESSION where INST_ID select = USERENV ('Instance')

  [07: 27:47 oracle[SQLPLUS]@dbalnp01[fraespappp90c] >

  x$ ksled $ksuse and x are fixed tables for GV$ SESSION.

  I hope it is clear now.

• Difference between V$ SESSION and GV$ SESSION

  Hi all
  
  I have a few questions:
  
  1. What is the difference between V$ SESSION and GV$ SESSION?
  
  2. is there an Oracle function defined as USERENV('SESSIONID'). to get the AUDSID of GV$ SESSION?
  
  Thanks in advance

  Hmmm... I had no idea... so I did some digging.

  The short answer is that other than the SYSDBA and SYSOPER, connections that all get the same AUDSID, it is unique throughout the database. The AUDSID values are generated from the SYS. Sequence of $ AUDSES.

  See MetaLink doc. ID 123128.1 and 122230.1 for more information.

  -Mark

• After you restore an image of my system drive, my tasks and events disappeared. Help!

  I've restored a backup image on my C: drive. Everything looks good except all my events and tasks have disappeared from the calendar!
  I understand that this data is included in my profile, but how do I get my events and tasks and put back them in the calendar? Are the import and export of functions expected to be used to provide backups of my events and tasks? Shouldn't they already appear in the calendar after the restoration of a system disk?

  After a lot of messing around, I think I solved this problem.

  The problem occurs because of an incompatibility between certain values in prefs.js vs values in the data table cal_events.

  I copied backup prefs.js (containing the 'calendar') related lines in the current prefs.js and now everything looks OK, I can see my tasks and events in the calendar.

  The lines looked like this:
  user_pref ("calendar.list.sortOrder", "75f0f98f-9fdf-4bca-9e48-656ff2e1457d 012fd0d9-bcf1-43b1-a98d-6b0117a3f779 511ca361-a646-4f94-880b-526a0a5cdba1");

  These long numbers must correspond to the values of the column. cal_id apparently if they do not match, they do not appear in the calendar.

  Mine does not, so I corrected the values in the prefs.js file and everything seems to go fine now.

  I still need to find the cause of the incompatibility, I think it was something in the way that I restored the disk then run MozBackup to restore my backup Thunderbird.

  Hope this helps others with this problem.

  Many thanks to Gnospen and Matt for their help!

• I have the two Master Sync activated WITHOUT be asked for master password said at the start of the session and password?

  The basic question is that whenever I start Firefox, I am invited, a few seconds later, my master password, regardless of if I will actually connect a site for which I saved my credentials.
  This same number as well as a replica of his original poster chosen as the best answer has been published on the following link: https://support.mozilla.org/en-US/questions/1039575

  I'm in the same situation as this poster, but I don't want to turn off sync. I need the master password set to protect my passwords stored, and I need the Sync feature enabled to share my profile between different computers that I use.
  If I close the master password prompt at the start of the session and then I go to a page that I recorded the password, I should I get prompted again, and that's all I need. Also, I've installed Sync do NOT share my passwords stored, where the master password invite so that the effect is useless in my case.

  So the question is simply how can I turn off the prompt for password at startup, have it pop up when you access a site that needs a password stored (or ask if I want to save a) and keep the clock running without sharing passwords.

  Thanks in advance.

  No, this is not possible.
  Sync must retrieve the journal of authentication data in password manager and which requires to enter the password to unlock the password.

  The synchronization used in Firefox 34 version then use password manager to store the name (e-mail) and password to use to connect to the synchronization server.
  The chrome://FirefoxAccounts entry in the Password Manager stores (kA and kB) credentials in JSON format.
  Earlier versions of Firefox used to store these data in the signedInUser.json file in the profile folder, but the current version only stores the sessionToken in this file and must the Manager password for the credentials of the synchronization.

• How can I regularly sign with an address and contact information?

  I used to sign my letters sent by mail or e-mail with details such as name, position, entity, address type header and coordinated details of phone numbers for fax number. Several different positions and roles and entities allowing me to indicate conveniently at this title, I was writing. How can Mozilla be set up to facilitate these approvals?

  Now, I realize that, perhaps, I have to overcome the annotation below "No file selected." This seems unnecessarily complicated for current affairs.

  I sincerely thank you.

  [Sensitive and personal information deleted.] Please do not post sensitive information, as well as please follow the guidelines and rules the Forum. [Thanks!]

  Try to go into the account settings. The home page (pictured below, image from another page in Support of Mozilla) has a "Manage identities" button on the lower right corner. This should allow you to add different identities, each with their specific signature, address, etc..

  I hope this helps.

• How to export pictures / albums of iPhotos to external disk and keep the time/date/year and location information changed?

  How to export pictures / albums of iPhotos to external disk and keep the time/date/year and location information changed?

  Menu, file == > export - check boxes to include metadata and location- export to iPhoto

  LN

• How to record a session .and there continue another time

  When I work on a particular subject, after a while, I want to interrupt my work in another time, so I need can continue from the previous session.

  You can use the Session Manager addon to save multiple sessions and restore them later.

  There's no other solution (maybe except a few other addon). Firefox itself does not support storage of multiple sessions.

• The Shutdown() call causes a StartExecution and event EndExecution

  When my application ends, he calls the following my recall of closing the form code:

  If (this.axApplicationMgr.Shutdown () is false)

  {

  e.Cancel = true;

  }

  on the other

  {

  ...

  }

  But before the ExitApplication event occurs, a StartExecution and event EndExecution occur.  Whence these extrinsic events and how can I get rid of them?

  It's normal.

• How to remove the alarms and events database of Citadel?

  Hello

  I use LV 2010 with DSC.

  I made a mistake in my program and I wrote too much data event and alarm at the Citadel. Database *.mdf/*.ldf files are quite large > 1 G. Normally, I connect only two alarms per day. I want to delete all events alarm + data before a certain time of stamps for example. 1.1.2011. How can I do? I tried to use MAX and perform the operation so I wrote small program which reach the data from temporary database and then remove it. Yet I can find old events and alarms... I am able to remove the traces of old but not the events/alarms. How do I remove the alarms and events?

  Thanks, Jim

  Hi Jim,.

  Have you seen this:

  http://forums.NI.com/T5/lookout/how-can-I-delete-alarm-and-event-data-from-a-Citadel5-database/m-p/5...

  Not sure if it is valid with the current version, but worth it.